Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Meysam Khaleghian has a total of 14 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Geometric Rollability Optimization of a Wheeled Chassis via Evolutionary Strategy

    by Farshad Jabari, Baxter Gonzalez, Meysam Khaleghian

    This study examines the influence of adding different profile geometries on the rollability performance of a wheeled robot released from various heights under controlled conditions. Three profile configurations were parametrically designed, computationally modeled, and optimized using a physics-based simulation framework. The optimized designs were then 3D-printed and attached to a robot chassis and evaluated alongside a baseline configuration (no profile addition). Rollability success was defined as the chassis returning to a stable, on-the-wheels configuration after launch. Experiments were conducted across two drop heights (75 cm and 130 cm), two launch speeds (0.8 m/s and 1.5 m/s), and launch angles ranging from −60° to +60°. The results demonstrate strong sensitivity of rollability performance to geometric configuration. Two of the optimized profiles showed significant improvements compared to the baseline. The best-performing profile exhibited robust performance across varying heights, speeds, and angles, whereas the other profile showed substantial performance gains at higher speeds and drop heights. These findings confirm that appropriate geometric optimization of profile structures can substantially enhance rollability stability for wheeled robots under dynamic impact conditions.


  • Open Access

    Comparative tribological and drainage performance of additively manufactured outsoles tread designs

    by Shuo Xu, Shuvodeep De, Meysam Khaleghian, Anahita Emami

    This study investigates the effect of various tread designs to enhance grip on both dry and wet friction, aiming to reduce slip and fall accidents, especially in slip-prone workplaces and among the elderly. The research involves analyzing frictional performance and deformation characteristics through dry and wet friction testing. Computer-aided design (CAD) software was used to create digital models of various tread patterns and two different additive manufacturing (AM) techniques : Fused Filament Fabrication (FFF) and Stereolithography (SLA) printing, were used to 3D print block samples with tread patterns, and the materials used were Thermoplastic Rubber (TPR) filament and photocurable elastomeric resin. A specialized friction testing machine was used to measure the friction force of the treads on a glass surface under dry and wet conditions. A high-speed camera recorded the treads' deformation and water drainage during testing. The results revealed the influence of tread pattern designs with two different rubber-like materials on friction and deformation, as well as performance on various contact surfaces.


  • Open Access

    Controlled Dry Adhesion of Bio-Inspired Fibrillar Polymers: Mechanics, Strategies, and Recent Advances

    by Shuo Xu, Anahita Emami, Meysam Khaleghian

    Recent advancements in tunable adhesion technologies have broadened the scope of applications for bio-inspired fibrillar adhesives. This review highlights the latest developments in controlled adhesion mechanisms, with a focus on bio-inspired fibrillar systems. We examine key theoretical foundations and progress in controllable adhesion, including contact mechanics, contact splitting efficiency, fracture mechanics, and the interplay between adhesion and friction. Various factors influencing adhesion strength are discussed alongside optimization approaches and innovative designs that enhance performance. The review also covers recent research on switchable adhesion strategies, with an emphasis on methods for regulating surface contact, stress distribution, and shear force control. Finally, we identify the primary challenges and future directions in the field, outlining areas that require further exploration and technological development. This paper aims to provide a comprehensive overview of current advancements and offer insights to guide future research in the evolving field of tunable adhesion technologies.


  • Open Access

    Wear Resistance of Additively Manufactured Footwear Soles

    by Shuo Xu, Shuvodeep De, Meysam Khaleghian, Anahita Emami

    This study systematically evaluated the wear resistance and mechanical performance of 3D-printed thermoplastic rubber (TPR) and flexible stereolithography (SLA) resin materials for footwear outsoles. Abrasion tests were conducted on 26 samples (2 materials × 13 geometries) to analyze the weight loss, variations in the friction coefficient, temperature change, and deformation behavior. Finite element method (FEM) simulations incorporating the Ogden hyperelastic model were employed to investigate the stress distribution and wear patterns. The results revealed that TPR exhibits superior abrasion resistance and stable wear curves, making it suitable for high-load applications. On average, the TPR samples showed 27.3% lower weight loss compared to the SLA resin samples. The SLA resin samples exhibited a 65% higher mean coefficient of friction (COF) compared to the TPR samples. Furthermore, the SLA resin samples demonstrated a 94% higher temperature change during the sliding tests, reflecting greater friction-induced heating. The FEM simulations further validated TPR’s performance in high-stress regions and SLA resin’s deformation characteristics. This study’s findings not only highlight the performance differences between these two 3D-printed materials but also provide theoretical guidance for material selection based on wear behavior, contributing to the optimization of outsole design and its practical applications.


  • Open Access

    Application of Artificial Intelligence and Sensor Fusion for Soil Organic Matter Prediction

    by Jasim Uddin, Jordan Sherrell, Anahita Emami, Meysam Khaleghian

    Soil organic matter (SOM) is one of the best indicators to assess soil health and understand soil productivity and fertility. Therefore, measuring SOM content is a fundamental practice in soil science and agricultural research. The traditional approach (oven-dry) of measuring SOM is a costly, arduous, and time-consuming process. However, the integration of cutting-edge technology can significantly aid in the prediction of SOM, presenting a promising alternative to traditional methods. In this study, we tested the hypothesis that an accurate estimate of SOM might be obtained by combining the ground-based sensor-captured soil parameters and soil analysis data along with drone images of the farm. The data are gathered using three different methods: ground-based sensors detect soil parameters such as temperature, pH, humidity, nitrogen, phosphorous, and potassium of the soil; aerial photos taken by UAVs display the vegetative index (NDVI); and the Haney test of soil analysis reports measured in a lab from collected samples. Our datasets combined the soil parameters collected using ground-based sensors, soil analysis reports, and NDVI content of farms to perform the data analysis to predict SOM using different machine learning algorithms. We incorporated regression and ANOVA for analyzing the dataset and explored seven different machine learning algorithms, such as linear regression, Ridge regression, Lasso regression, random forest regression, Elastic Net regression, support vector machine, and Stochastic Gradient Descent regression to predict the soil organic matter content using other parameters as predictors.


  • Open Access

    Slip Risk Prediction Using Intelligent Insoles and a Slip Simulator

    by Shuo Xu, Javed Imtiaze Khan, Meysam Khaleghian, Anahita Emami

    Slip and fall accidents are the leading cause of injuries for all ages, and for fatal injuries in adults over 65 years. Various factors, such as floor surface conditions and contaminants, shoe tread patterns, and gait behavior, affect the slip risk. Moreover, the friction between the shoe outsoles and the floor continuously changes as their surfaces undergo normal wear over time. However, continuous assessment of slip resistance is very challenging with conventional measurement techniques. This study addresses this challenge by introducing a novel approach that combines sensor fusion technology and machine learning techniques to create intelligent insoles designed for fall risk prediction. In addition, a state-of-the-art slip simulator, capable of mimicking the foot’s motion during a slip, was developed and utilized for the assessment of slipperiness between various shoes and floor surfaces. Data acquisition involved the collection of pressure data and three-axial accelerations using instrumented shoe insoles, complemented by friction coefficient measurements via the slip simulator. The collected dataset includes four types of shoes, three floor surfaces, and four surface conditions, including dry, wet, soapy, and oily. After preprocessing of the collected dataset, the simulator was used to train five different machine learning algorithms for slip risk classification. The trained algorithms provided promising results for slip risk prediction for different conditions, offering the potential to be employed in real-time slip risk prediction and safety enhancement.


  • Open Access

    Behavior of 3D Printed Stretchable Structured Sensors

    by Eugene Kim, Seyedmeysam Khaleghian, Anahita Emami

    Piezoresistive structures inspired by serpentines, auxetic, and kirigami arrangements have demonstrated good flexibility and sensitivity under tension. Piezoresistive structures display optimal performance when the characteristics entail reliable stretchability and repeatability. These structures can be implemented as wearable sensors by compressing and elongating the conductive nanocomposites to vary the flow of electrons and to provide resistance change. To guarantee the reliability of these structures for strain sensing, it is important that the resistance change in these structures remains constant under repeated loads. In this study, the performance of different piezoresistive structures under cyclic tensile load is investigated and compared. Based on the performance of different types of structures, novel hybrid structures have been also proposed to design for both high stretchability and sensitivity of piezoresistive sensors. All the structures were tested with position limits rather than a fixed force to avoid permanent deformation. First, small position limits were used to determine Young’s Modulus, then a 10-cycle tensile test with larger position limits was used to further study the electromechanical behavior of different piezoresistive structures under larger deformation and repetition. Finally, the gage factor was derived for all the studied structures, and they were re-categorized based on properties’ similarities.


  • Open Access

    The Application of PVDF-Based Piezoelectric Patches in Energy Harvesting from Tire Deformation

    by Kevin Nguyen, Matthew Bryant, In-Hyouk Song, Byoung Hee You, Seyedmeysam Khaleghian

    The application of Polyvinylidene Fluoride or Polyvinylidene Difluoride (PVDF) in harvesting energy from tire deformation was investigated in this study. An instrumented tire with different sizes of PVDF-based piezoelectric patches and a tri-axial accelerometer attached to its inner liner was used for this purpose and was tested under different conditions on asphalt and concrete surfaces. The results demonstrated that on both pavement types, the generated voltage was directly proportional to the size of the harvester patches, the longitudinal velocity, and the normal load. Additionally, the generated voltage was inversely proportional to the tire inflation pressure. Moreover, the range of generated voltages was slightly higher on asphalt compared to the same testing conditions on the concrete surface. Based on the results, it was concluded that in addition to the potential role of the PVDF-based piezoelectric film in harvesting energy from tire deformation, they demonstrate great potential to be used as self-powered sensors to estimate the tire-road contact parameters.