Tiancheng Zhou
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Tiancheng Zhou has a total of 26 co-authors. Here are the top co-authors by number of shared publications:
- Jin Li
School of Civil Engineering, Shandong Jiaotong University, 5 Jiaoxiao Road, Jinan 250357, China
3 shared publications - Dalu Xiong
Jinan Kingyue Highway Engineering Company Limited, Jinan 250220, China
2 shared publications - Yun-Feng Xi
School of Transportation Civil Engineering, Shandong Jiaotong University, Jinan 250357, China
2 shared publications - Zhongmei Lu
Jinan Kingyue Highway Engineering Company Limited, Jinan 250220, China
2 shared publications - Bao-Ling Chen
Dezhou Highway Development Center, Dezhou 253011, China
1 shared publication - Bing Yang
Shandong Zhixing Consulting Survey and Design Institute, Dezhou 253011, China
1 shared publication
Latest Publications
- Open Access
Study of the Design and Mechanical Properties of the Mix Proportion for Desulfurization Gypsum–Fly Ash Flowable Lightweight Soil
In order to solve the global problem of bridge head jumping caused by the insufficient compaction of the roadbed in the transition section of highways and bridges, a desulfurization gypsum–fly ash flowable lightweight soil without vibration, capable of self-compaction, low bulk density, and economic and environmental protection, has been developed. This study selected low-grade cement, industrial waste (fly ash and desulfurization gypsum), and Yellow River silt as the raw materials for the design of the mix ratio of a desulfurization gypsum–fly ash flow-state lightweight soil mix. Through multiple indoor experiments, the influence of cement content, silt content, and the fly ash/desulfurization gypsum quality ratio on its fluidity and mechanical properties was systematically studied. The stress–strain relationship under uniaxial compression was analyzed and the strength formation mechanism was revealed through scanning electron microscopy (SEM). The results show that the mechanical properties of the prepared desulfurization gypsum–fly ash flowable lightweight soil meet the engineering requirements. Increasing both the cement and fly ash content results in the decreased fluidity of the desulfurization gypsum and fluidized fly ash. However, as the mass ratio of fly ash to desulfurization gypsum increases, the fluidity reaches its maximum when the mass ratio of fly ash to desulfurization gypsum is 2:1. Based on the stress–strain relationship test results, a uniaxial compressive constitutive model of the desulfurization gypsum–fly ash flowable lightweight soil was proposed. The model was fitted and analyzed with the test results, and the correlation was greater than 0.96. The high degree of agreement showed that desulfurization gypsum can promote the disintegration of fly ash, thereby increasing the specific surface area. This provides more contact points, promotes the hardening process, and enhances the interlocking force between particles and the formation of cementitious substances, further enhancing strength.
Open AccessStudy of the Design and Mechanical Properties of the Mix Proportion for Desulfurization Gypsum–Fly Ash Flowable Lightweight Soil
In order to solve the global problem of bridge head jumping caused by the insufficient compaction of the roadbed in the transition section of highways and bridges, a desulfurization gypsum–fly ash flowable lightweight soil without vibration, capable of self-compaction, low bulk density, and economic and environmental protection, has been developed. This study selected low-grade cement, industrial waste (fly ash and desulfurization gypsum), and Yellow River silt as the raw materials for the design of the mix ratio of a desulfurization gypsum–fly ash flow-state lightweight soil mix. Through multiple indoor experiments, the influence of cement content, silt content, and the fly ash/desulfurization gypsum quality ratio on its fluidity and mechanical properties was systematically studied. The stress–strain relationship under uniaxial compression was analyzed and the strength formation mechanism was revealed through scanning electron microscopy (SEM). The results show that the mechanical properties of the prepared desulfurization gypsum–fly ash flowable lightweight soil meet the engineering requirements. Increasing both the cement and fly ash content results in the decreased fluidity of the desulfurization gypsum and fluidized fly ash. However, as the mass ratio of fly ash to desulfurization gypsum increases, the fluidity reaches its maximum when the mass ratio of fly ash to desulfurization gypsum is 2:1. Based on the stress–strain relationship test results, a uniaxial compressive constitutive model of the desulfurization gypsum–fly ash flowable lightweight soil was proposed. The model was fitted and analyzed with the test results, and the correlation was greater than 0.96. The high degree of agreement showed that desulfurization gypsum can promote the disintegration of fly ash, thereby increasing the specific surface area. This provides more contact points, promotes the hardening process, and enhances the interlocking force between particles and the formation of cementitious substances, further enhancing strength.
- Open Access
Application of Steel-Fiber-Reinforced Self-Stressing Concrete in Prefabricated Pavement Joints
Prefabricated pavement, with its advantages of a high paving speed, low material consumption, low carbon emissions, high strength, and easy construction, has gradually been used to address issues associated with traditional cement pavement construction. However, even under the long-term combined effects of vehicle loads and environmental loads, the joints between pavement slabs remain prone to various problems. This paper proposes the use of steel-fiber-reinforced self-stressing concrete (SFRSSC) with a certain level of self-stress for joint pouring and connection to control the development of cracks in the joints and achieve seamless integration between the slabs. Additionally, the self-stress generated by SFRSSC is utilized to enhance the continuity of the prestressed design in precast slabs, thereby extending their service life. Through laboratory experiments and field tests, the self-stress magnitude, mechanical strength, and long-term applicability of SFRSSC were studied. The results indicate that SFRSSC can achieve self-stress levels of over 7 MPa under standard curing conditions, but the values decrease significantly when removed from the standard curing environment. SFRSSC exhibits a compressive strength of over 60 MPa and a flexural strength of over 9 MPa, both of which exceed the requirements of the relevant standards, making it suitable for use as a pavement joint material. During long-term monitoring in the field, SFRSSC demonstrates favorable expansion effects and high stability. The longitudinal expansion remains stable at 100 με, while the transverse expansion exhibits minor shrinkage, maintained at around 25.2 με. Therefore, the application of SFRSSC in assembly-type prestressed pavement joints shows high applicability.
Open AccessApplication of Steel-Fiber-Reinforced Self-Stressing Concrete in Prefabricated Pavement Joints
Prefabricated pavement, with its advantages of a high paving speed, low material consumption, low carbon emissions, high strength, and easy construction, has gradually been used to address issues associated with traditional cement pavement construction. However, even under the long-term combined effects of vehicle loads and environmental loads, the joints between pavement slabs remain prone to various problems. This paper proposes the use of steel-fiber-reinforced self-stressing concrete (SFRSSC) with a certain level of self-stress for joint pouring and connection to control the development of cracks in the joints and achieve seamless integration between the slabs. Additionally, the self-stress generated by SFRSSC is utilized to enhance the continuity of the prestressed design in precast slabs, thereby extending their service life. Through laboratory experiments and field tests, the self-stress magnitude, mechanical strength, and long-term applicability of SFRSSC were studied. The results indicate that SFRSSC can achieve self-stress levels of over 7 MPa under standard curing conditions, but the values decrease significantly when removed from the standard curing environment. SFRSSC exhibits a compressive strength of over 60 MPa and a flexural strength of over 9 MPa, both of which exceed the requirements of the relevant standards, making it suitable for use as a pavement joint material. During long-term monitoring in the field, SFRSSC demonstrates favorable expansion effects and high stability. The longitudinal expansion remains stable at 100 με, while the transverse expansion exhibits minor shrinkage, maintained at around 25.2 με. Therefore, the application of SFRSSC in assembly-type prestressed pavement joints shows high applicability.
- Open Access
Impact of High-Performance Expansion and Shrinkage-Reducing Agents on the Mechanical Properties and Shrinkage Compensation of High-Strength Concrete
A large number of binder ingredients such as cement and active mineral admixtures are used in the preparation of high-strength concrete, and the water:binder ratio is extremely low. This leads to a large amount of shrinkage of concrete at the early stage of curing, which poses a great threat to the safety and durability of the structure. To solve the cracking problem of high-strength concrete induced by high shrinkage, we choose to change the admixture to solve it. In this study, a high-performance expansion agent (HPEA) and shrinkage-reducing agent, which are currently studied in a small number, were selected by changing the way of admixture, and their effects on the strength and shrinkage of high-strength concrete were compared and analyzed. The results show that the addition of a HPEA is beneficial to the compressive strength of concrete and sufficient expansion can be obtained by using a high amount of HPEA, but there is an excessive and delayed expansion to produce cracks in the later stage. A shrinkage-reducing agent plays an adverse role in the development of concrete strength, but it performs better in inhibiting shrinkage. The combination of a HPEA and shrinkage reducing agent can largely avoid the formation of cracks, and the two have a certain synergy. The main reason is that a HPEA compensates for some of the negative effects of a shrinkage-reducing agent on concrete strength, and the shrinkage-reducing agent further strengthens the inhibition effect of a HPEA on concrete shrinkage, and to some extent avoids the risk of cracks caused by delayed expansion caused by admixture problems.
Open AccessImpact of High-Performance Expansion and Shrinkage-Reducing Agents on the Mechanical Properties and Shrinkage Compensation of High-Strength Concrete
A large number of binder ingredients such as cement and active mineral admixtures are used in the preparation of high-strength concrete, and the water:binder ratio is extremely low. This leads to a large amount of shrinkage of concrete at the early stage of curing, which poses a great threat to the safety and durability of the structure. To solve the cracking problem of high-strength concrete induced by high shrinkage, we choose to change the admixture to solve it. In this study, a high-performance expansion agent (HPEA) and shrinkage-reducing agent, which are currently studied in a small number, were selected by changing the way of admixture, and their effects on the strength and shrinkage of high-strength concrete were compared and analyzed. The results show that the addition of a HPEA is beneficial to the compressive strength of concrete and sufficient expansion can be obtained by using a high amount of HPEA, but there is an excessive and delayed expansion to produce cracks in the later stage. A shrinkage-reducing agent plays an adverse role in the development of concrete strength, but it performs better in inhibiting shrinkage. The combination of a HPEA and shrinkage reducing agent can largely avoid the formation of cracks, and the two have a certain synergy. The main reason is that a HPEA compensates for some of the negative effects of a shrinkage-reducing agent on concrete strength, and the shrinkage-reducing agent further strengthens the inhibition effect of a HPEA on concrete shrinkage, and to some extent avoids the risk of cracks caused by delayed expansion caused by admixture problems.
- Open Access
Experimental Study on the Bending Resistance of Hollow Slab Beams Strengthened with Prestressed Steel Strand Polyurethane Cement Composite
In order to explore the toughening performance and failure mechanism of hollow slab beams strengthened with prestressed steel strand polyurethane cement composite, three test beams (L1–L3) were strengthened and one test beam (L0) was used as a comparison. The influence of different tensile stresses of steel strand and fiber additions on the flexural bearing capacity of the hollow slab beams, was studied. The cracking characteristics, load deflection relationship, ductility and strain of each test beam were compared and analyzed. The test results showed that the toughened material was well bonded to the hollow slab beam and the steel strand, which effectively inhibited the development of cracks in the test beams. The flexural bearing capacity of the strengthened test beams was significantly improved. The use of prestressed steel strand polyurethane cement composite material effectively improved the flexural bearing capacity of the test beams, and this reinforcement process can be further extended to engineering applications.
Open AccessExperimental Study on the Bending Resistance of Hollow Slab Beams Strengthened with Prestressed Steel Strand Polyurethane Cement Composite
In order to explore the toughening performance and failure mechanism of hollow slab beams strengthened with prestressed steel strand polyurethane cement composite, three test beams (L1–L3) were strengthened and one test beam (L0) was used as a comparison. The influence of different tensile stresses of steel strand and fiber additions on the flexural bearing capacity of the hollow slab beams, was studied. The cracking characteristics, load deflection relationship, ductility and strain of each test beam were compared and analyzed. The test results showed that the toughened material was well bonded to the hollow slab beam and the steel strand, which effectively inhibited the development of cracks in the test beams. The flexural bearing capacity of the strengthened test beams was significantly improved. The use of prestressed steel strand polyurethane cement composite material effectively improved the flexural bearing capacity of the test beams, and this reinforcement process can be further extended to engineering applications.
- Open Access
- 19 December 2022
- Published by MDPI AG in Sustainability
- Vol. 14 (24) , 17030
Research on Flexural Bearing Capacity of Reinforced Hollow Slab Beams Based on Polyurethane Composite Material Positive and Negative Pouring Method
In order to explore the construction technology of prestressed steel strand–polyurethane cement composites for strengthening hollow slab beams, two reinforced test beams (L1, L2) and one unreinforced test beam (L0) were subjected to flexural static load tests. The deflection, ductility, stiffness, strain, and bearing capacity of each test beam were used to summarize the influence of different reinforcement techniques on the flexural performance of hollow slab beams. Research shows the prestressed steel strand–polyurethane composite material was well-bonded to the hollow slab beam, which effectively inhibits the development of concrete cracks and delays the damage process of hollow slab beams, that the reinforcement effect of the test beam L1 under the reverse pouring process was remarkable, and the bending performance of the test beam L2 under the forward pouring process of the simulated real bridge was good, which was much better than that of the unreinforced beam L0. The use of tensile prestressed steel strands and forward casting of polyurethane–cement composite materials effectively improved the flexural bearing capacity of the test beams, and this reinforcement process can be further extended to engineering applications.
- 19 December 2022
- Published by MDPI AG in Sustainability
- Vol. 14 (24) , 17030
Open AccessResearch on Flexural Bearing Capacity of Reinforced Hollow Slab Beams Based on Polyurethane Composite Material Positive and Negative Pouring Method
In order to explore the construction technology of prestressed steel strand–polyurethane cement composites for strengthening hollow slab beams, two reinforced test beams (L1, L2) and one unreinforced test beam (L0) were subjected to flexural static load tests. The deflection, ductility, stiffness, strain, and bearing capacity of each test beam were used to summarize the influence of different reinforcement techniques on the flexural performance of hollow slab beams. Research shows the prestressed steel strand–polyurethane composite material was well-bonded to the hollow slab beam, which effectively inhibits the development of concrete cracks and delays the damage process of hollow slab beams, that the reinforcement effect of the test beam L1 under the reverse pouring process was remarkable, and the bending performance of the test beam L2 under the forward pouring process of the simulated real bridge was good, which was much better than that of the unreinforced beam L0. The use of tensile prestressed steel strands and forward casting of polyurethane–cement composite materials effectively improved the flexural bearing capacity of the test beams, and this reinforcement process can be further extended to engineering applications.