JFJiangang Feng

Jiangang Feng

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Jiangang Feng has a total of 26 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Real-time visualization of cross-media transport of microplastics from water to porous media

    by Xuyang Qiao, Shangtuo Qian, David Z. Zhu, Hui Xu, Jiangang Feng, Shunan Dong

    The environmental persistence and ecological impacts of microplastics have attracted considerable global attention. After entering aquatic environments, microplastics can settle and become trapped by subaqueous sediments, yet the cross-media hydrodynamics of microplastics remain unresolved. This study presents a laboratory-scale experimental investigation of the transport of continuously released microplastics from water to porous media, aiming to examine microplastic plume formation, interfacial impact, radial propagation, and infiltration within porous media as a coupled sequence. The refractive index matching technique combined with high-speed shadowgraph imaging was employed to enable real-time visualization of microplastic cross-media transport. Following impact, microplastics radially propagate along the porous media surface and exhibit two stages with distinct temporal variations of propagation distance, which are dominated, respectively, by impact momentum and by gravity current and vortex entrainment. A dimensionless scaling relationship was established to describe the radial propagation distance of microplastics varying with time across different stages, with the stage transition occurring at a dimensionless time of 0.7 based on a viscous timescale. A transition between sustained microplastic infiltration into the porous media and predominant accumulation on the porous media surface was observed when the microplastic-to-pore size ratio was approximately 1/8. An increased frontal infiltration velocity is obtained for microplastics with a more spherical shape and higher density under a smaller microplastic-to-pore size ratio and a larger mass injection rate. This study elucidates the previously unresolved dominant physical mechanisms and hydrodynamic characteristics governing the cross-media transport of microplastics, thereby advancing the fluid-mechanical understanding and predictive description of microplastic transport.

  • Experimental and numerical analysis of hydraulic performance in an axial-flow pump under diverse inflow conditions

    by Dongsheng Wang, Tong Mu, Jiangang Feng, Rui Zhang, Zhaodan Fei, Hui Xu, Peipei Zhang

    Axial-flow pumps have complex hydraulic performance under diverse conditions, especially under low-flow conditions, which may occur rotational stall and brings serious system vibration. By combining experiments and numerical simulation analysis, the fine features of the local internal flow field in multi-flow rate conditions are accurately reflected, revealing the mechanism of changes in the internal flow field and hydraulic performance of axial-flow pumps under different flow conditions, especially at low-flow conditions. As the flow rate decreased, the backflow velocity in near wall area of the inlet pipe and circumferential swirl velocity increased gradually, and the tip leakage vortex (TLV) and pressure surface vortex also increased gradually. Based on the average axial velocity V0 under the design flow rate, the axial backflow velocity was −1.18 V0 and the circumferential velocity was −3.53 V0 under the deep stall condition. The maximum vorticity of TLV, secondary vortex and pressure surface vortex was 5 × 106 S−2, and the area of maximum intensity was the largest. The interaction between the secondary vortices and the mainstream intensifies the formation and development of passage vortex and blocks the inlet pipe. Under the influence of comprehensive factors, the entropy production in the inlet channel and impeller region reached the maximum under the deep stall condition, both of which were above 22 × 10−2 kg m2 s−3 K−1, more than twice that outside the saddle zone. This study analyzed the flow instability under biased conditions from multiple levels and perspectives, providing a basis for improving the hydraulic performance under diverse flow conditions in the future.


  • Floating particles transport through the free surface vortex technique: A novel numerical study to assess the interaction among different scales of vortex structures

    by Zhixiang Li, Huixiang Chen, Hui Xu, Jiangang Feng, Mosè Rossi, Shangtuo Qian, Zixuan Yang, Kan Kan

    Fat, oil, and grease (FOG) floating particles in the sump of sewage pumping stations will accumulate together to form rigid layers, resulting in failure for pump device. To overcome this, the free surface vortex (FSV) technique has been considered and applied to transport floating particles toward the submerged suction pump inlet. This paper investigates the potential of vortices as a means of downward motion of FOG. The entrainment capacity of FSV is investigated by numerical simulations using a coupled level-set and volume-of-fluid method. Two coherent structures are decomposed by proper orthogonal decomposition: FSV represented by the first two orders with high energy content and spiral vortex bands represented by low energy and high order models. The extracted ridges of the finite-time Lyapunov exponent (FTLE) delineate different regions of the flow field and effectively capture the evolution of Lagrangian coherent structures. The floating particles in the sump are first caught by the dividing line formed by the FTLE ridges, mixed in the entrainment zone, and then merged into the vortex. The enstrophy production term dominates the development of vorticity. Subject to the influence of flow velocity gradients, both radial and tangential vortices undergo a transition into axial vortices. This transformation enhances the vortex's capacity to entrain particles within the vortex core area, leading to their rapid inward spiraling toward the vortex center and eventual expulsion due to the vortex's entrainment effect.

  • Open Access

    Flow instability of an axial flow pump-as-turbine using relative streamline coordinates

    by Kan Kan, Qingying Zhang, Jiangang Feng, Yuan Zheng, Hui Xu, Mosè Rossi, Haoyu Li

    When axial flow pumps-as-turbines (PATs) operate under off-design conditions, unstable and unsteady flow structures appear in the internal flow field, resulting in suboptimal functioning. These operating conditions not only decrease the efficiency of the hydraulic machines but also affect their mechanical reliability. This study establishes relative streamline coordinates, based on the blade's mean camber line, to investigate flow instabilities in axial flow PATs from a new perspective. Numerical simulations on an axial flow PAT were performed and validated using experimental data. The results show that flow separation is more likely to occur due to the more curved profile at the blade's suction surface, leading to considerable fluctuations in velocity along the flow direction and enstrophy amplitude near both the hub and impeller shroud. Moreover, the poor matching of the relative inflow angle of the impeller with the blade inlet angle leads to impingement losses near their leading edge, generating unstable flows and significant pressure pulsations, which induces hydraulic instability within the impeller. In addition to rotor-stator interference effects, the curvature of the blade suction surface profile and the bend structure of inlet conduit are significant factors that influence the pressure pulsation distribution of the PAT. An analysis of the enstrophy transport equation indicates that the relative vortex generation and the Reynolds stress dissipation terms play a key role in both vortex generation and dissipation, whereas the viscous term has a lower influence. These findings can serve as a reference for the optimization and efficient design of axial flow PATs.


  • Open Access

    Machine learning-based splash prediction model for drops impact on dry solid surfaces

    by Han Ye, Han Ye, Han Ye, Shangtuo Qian, Shangtuo Qian, Shangtuo Qian, David Z. Zhu, David Z. Zhu, David Z. Zhu, Jiangang Feng, et al.

    The impact of drops on dry solid surfaces has important applications in engineering. The post-impact behavior of drops can be classified into non-splash and splash, and there is a lack of splash prediction models that well consider the independent and coupled effects of liquid properties, drop impact characteristics, and surface properties. In this study, machine learning methods of Random Forest (RF) and Support Vector Machine (SVM) are applied to build splash prediction models and analyze the effects of different features. The RF model achieves good prediction accuracy and identifies the roughness R*, Weber number We, Reynolds number Re, and contact angle θeq as the most influential parameters, with decreasing importance. The interpretability analysis shows the increasing splashing tendency with increasing We, Re, and R* and decreasing cos θeq, and a special case of non-splash by drops impact on hydrophobic surfaces with cos θeq ≈ −0.45 is found, which can be explained by the coupled effects of drop and surface features. The classical splash prediction model, K-parameter model, is improved by SVM in an explicit form and considering the effects of liquid properties, drop impact characteristics, and surface properties. The improved K-parameter model has good performance for surfaces with various roughness and wettability, and its prediction accuracy reaches 86.49%, which is significantly higher than 67.57% of the K-parameter model, 46.49% of the Riboux and Gordillo model, and 66.10% of the Zhang model. This study is expected to provide valuable insight into the control of non-splash or splash of drops according to different requirements during applications.


  • Open Access

    A computational method for complex-shaped hydraulic turbomachinery flow based on the immersed boundary method

    by Haoyu Li, Jiangang Feng, Yuan Zheng, Hui Xu, Huixiang Chen, Maxime Binama, Kan Kan

    Traditional numerical simulation techniques, such as sliding mesh, dynamic mesh, and others, have many limitations in dealing with flow simulation with the large-scale movement of solid boundaries, which is the case for simulating the flow of complex-shaped hydraulic turbomachinery such as propellers, pumps, and turbines. The immersed boundary (IB) method provides a new approach to solve the above-mentioned limitations. Therefore, this study proposes a sharp-interface IB method based on the level-set function that is suitable for simulating the flow through turbomachinery with complex geometries. This method is applied to actual three-dimensional numerical simulations of high-Reynolds number propellers using an in-house computational fluid dynamics solver. The results show that the proposed method can provide comparatively accurate predictions of unsteady load coefficients within the propeller flow passage and capture the correct propeller wake characteristics as well as the interaction between the propeller wake and free surface. This study is aimed at providing a theoretical basis and engineering reference for the application of the IB method in engineering numerical simulations.


  • Top Cited Papers

    Energy performance evaluation of an axial-flow pump as turbine under conventional and reverse operating modes based on an energy loss intensity model

    by Kan Kan, Feng Zhao, Hui Xu, Jiangang Feng, Huixiang Chen, Weidong Liu

    As a low-cost scheme for small-scale hydropower generation, pump as turbines (PATs) are used at different hydrosites around the world. Nevertheless, a big number of recently conducted studies on PAT performance have mainly focused on the centrifugal type, despite the fact that the axial-flow type has a comparatively large flow capacity, thus disposing of higher power density. Therefore, this article seeks to investigate the flow dynamics of an axial-flow PAT and associated energy loss characteristics, under both pump and turbine operating modes. It adopts the numerical simulation method and uses entropy production theory to propose an energy loss intensity model in the cylindrical coordinate system, which quantitatively gives the spatial variation pattern for energy losses in pump and turbine operating modes. In addition, the correlation between energy loss and flow instability is deeply analyzed, where the energy characteristics in pump and turbine modes are quantitatively evaluated. It is shown that the energy loss within the impeller and the guide vane flow fields, for both operating modes, is mainly because of the turbulent entropy production. The proportion of direct entropy production and wall entropy production is found to be relatively small. The velocity gradient, flow vorticity, turbulence intensity, and energy losses within the flow passages of the axial-flow PAT have been closely related. However, owing to the difference in PAT operating modes, there is a significant difference in the location of energy losses. The unstable flow phenomena, such as the impact at the blade inlet, flow deviation at the blade outlet, flow separation, back-flow, and vortex, are the main reasons for entropy production. This study serves as a reference for the design, optimization, and application of axial-flow PATs.


  • Influence of Orifice Plates on Taylor Bubble of Geyser in Storage Tunnel System

    by Xiaosheng Wang, Shangtuo Qian, Yuling Chen, Jiangang Feng

    The storage tunnel system is an important project to solve the shortage of urban storage capacity and prevent waterlogging, geyser phenomenon is a serious hydraulic accident in the system, and it is of great significance to study geyser characteristics and flow control measures for safe operation of storage tunnel system. In the present work, the bubble rising process in the vertical pipe was studied used numerical simulation method, the influence of orifice plates on Taylor bubble of geyser in storage tunnel system had been analyzed in detail. The research results indicated that orifice plates had a significant effect on Taylor bubble of geyser, under the action of orifice plates, the bubble shape, bubble pressure and flow field structure are fundamentally changed due to the influence of local jet flow and entrainment air, the difference value between the bubble pressure head and the water column height and the pressure gradient of water column were greatly reduced, which leaded to a significant reduction of the bubble rising height and the maximum bubble velocity, this was beneficial to reduce the intensity of geyser in storage tunnel system.