LXLianchao Xu

Lianchao Xu

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Lianchao Xu has a total of 21 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Study on micro-vibration mechanism and flow characteristics of aerostatic bearings based on proper orthogonal decomposition

    by Cheng Cheng, Ming Zhao, Zhihui Zhao, Zhengxian Liu, Weijie Hou, Lijia Yan, Zhanxin Li, Sheng Chen, Lianchao Xu

    The unsteady flow field in the aerostatic bearing always induces micro-vibrations, which are severely detrimental to the stability and precision of the bearing. Extensive research has been conducted on the mechanism of micro-vibration, but a consensus has not yet been reached. To this end, the large eddy simulation (LES) and proper orthogonal decomposition methods were employed to analyze the flow field of an annular aerostatic bearing in this paper. A mechanism for inducing micro-vibration and the identification of a novel flow behavior were ultimately revealed. First, the accuracy of our LES method has been validated through quantitative comparison with experimental data. Then, the mode decomposition has been conducted to analyze the flow field under various gas supply pressures. The results demonstrate that when the supply pressure Ps = 0.4 MPa, the micro-vibration is dominated by a pair of adjacent large-scale vortices with low frequencies in the recess. However, when Ps = 0.5 and 0.6 MPa, the convection and shearing processes near the orifice outlet and the rectangular recess inlet become intense, resulting in the displacement of large-scale vortices. Eventually, the small-scale high-frequency pressure fluctuation structures have been also observed, which are closely related to the convection process within recess. With the increase in gas supply pressure, the high-frequency pressure fluctuations at the circular recess outlet gradually diminish, while those at the orifice outlet emerge and gradually enlarge. Meanwhile, the mode dominant frequency is transferred from around 200 kHz to around 1000 kHz. The energy fraction of the high-frequency pressure fluctuations is also greatly increased.


  • Proper orthogonal decomposition analysis of flow characteristics of aerostatic bearings based on Large Eddy Simulation

    by Ming Zhao, Zhihui Zhao, Cheng Cheng, Zhengxian Liu, Weijie Hou, Lijia Yan, Zhanxin Li, Sheng Chen, Lianchao Xu


  • Numerical study of free stream turbulence effects on dynamic stall of pitching tubercled wings

    by Ming Zhao, Weibin Chen, Jiahuan Chen, Lianchao Xu, Xiaojian Li, Zhengxian Liu

    The feasibility of a tubercled leading-edge in dynamic stall control has been validated, and the impacts of an upstream cylinder wake have already been discussed in the previous research. However, the influences of wake coherent characteristics on the dynamic stall process are inevitable. To this end, the synthetic turbulence method was adopted in the present study to generate incoming turbulence. The suppression of dynamic stall could be observed according to the shrink of hysteresis loop of aerodynamic lift. Then, the dynamic stall mechanisms have been analyzed with the help of mode decomposition method. The emergence and development of the leading-edge vortex indicate the increase in aerodynamic lift, while he detachment of dynamic stall vortex leads to the lift degradation during the onset of dynamic stall. Eventually, the influence of turbulence intensity (TI) has also been discussed through the comparison of TI = 5% and TI = 10% cases. It turns out that flow separation is more remarkable at both peak and trough sections in the case of TI = 5%, which is intrinsically caused by the suppression of resistance of adverse pressure gradient.


  • Open Access

    Proper Orthogonal Decomposition Analysis of Flow Characteristics of Aerostatic Bearings based on Large Eddy Simulation

    by Ming Zhao, Zhihui Zhao, Cheng Cheng, Zhengxian Liu, Weijie Hou, Lijia Yan, Zhanxin Li, Lianchao Xu

    The driving mechanism of the microvibration of aerostatic bearings is still unclear. Although there are several interpretations, none of them is conclusive. The difficulty lies in the complicated information concealed beneath the turbulence flow. To this end, the proper orthogonal decomposition (POD) method was systematically implemented in the aerostatic bearing flow field analysis in the present study, and some new findings have been proposed. First, the accuracy of our large eddy simulation (LES) has been validated through quantitative comparison with the experimental reference. Then, the mode decomposition has been conducted at a circumferential symmetry plane and the influence of supply pressure has been uncovered. It turns out that the vortices within the recess dominate the flowfield when the supply energy Ps=3atm, while the shear flow in the vicinity of the recess inlet becomes intense and corresponding vortices become predominant in the case of Ps=5atm. Meanwhile, the 4atm case could be regarded as an intermediate state between the 3atm and 5atm cases and both of the above flow features could be observed. Eventually, the influences of film thickness have also been discussed when Ps=4atm. Different from the case of h=10μm, the vortices near the recess outlet could be detected when the film thickness is increased to 20μm. The control of corresponding flow structures might be helpful for the microvibration suppression.

  • Open Access

    An improved mode time coefficient for dynamic mode decomposition

    by Lianchao Xu, Zhengxian Liu, Xiaojian Li, Ming Zhao, Yijia Zhao

    Dynamic mode decomposition (DMD) is widely used for extracting dominant structures of unsteady flow fields. However, the traditional mode time coefficient of DMD is assumed to change exponentially over the time. Consequently, it cannot deal with the unstable flow fields whose modes present nonexponential evolution regularities. Also, the inaccurate mode time coefficient might cause an unreasonable rank of decomposed modes, leading to the dominant modes to be ignored. To overcome these shortcomings, an improved mode time coefficient based on the Moore–Penrose pseudoinverse is proposed for the DMD, and a new integrated parameter based on the improved mode time coefficient is defined to rank the decomposed modes. The DMD with the improved mode time coefficient (abbreviated as DMD-TC) is expected to accurately describe the temporal evolutions of modes in complex forms for unstable systems and results in a more reasonable rank for the modes. To validate the DMD-TC, two complex analytical functions (a continuous case and an intermittent case) and two typical unstable flows (the flow around a cylinder and the dynamic stall of a pitching airfoil) are investigated. The results indicate that the DMD-TC can accurately describe temporal evolutions of modes with complex nonlinear regularities, including exponential, logarithmic, linear, gradually intermittent, transiently intermittent, and other complex regularities. Also, due to the improved mode time coefficient, the DMD-TC can provide a more reasonable rank for unstable modes. These improvements help to identify instantaneous dominant dynamic modes (even with minor initial amplitudes) of real unstable flow fields and accurately describe their temporal evolutions.


  • Dynamic stall of pitching tubercled wings in vortical wake flowfield

    by Ming Zhao, Lianchao Xu, Xiaojian Li, Yijia Zhao, Zhengxian Liu

    In consideration of the turbulent inflow condition of engineering applications, the flow mechanisms of dynamic stall of a tubercled airfoil have been comprehensively analyzed with an upstream cylinder. Numerical simulation of the flowfield of a tubercled wing with NACA0021 (National Advisory Committee for Aeronautics) airfoil has been conducted with the large eddy simulation model. Then, flow mechanisms have been analyzed based on the aerodynamic performances and flow structure descriptions. Meanwhile, proper orthogonal decomposition (POD) analysis has been carried out at both trough and peak sections to reveal the flow dynamics. It turns out that the dynamic stall process vanishes, and performances would be obviously impacted by the incoming cylinder wake in the case of αA=5° due to the enforced resistance of adverse pressure gradient. Furthermore, the first leading POD mode corresponds to the pitching movement at both trough and peak sections, while the high-order modes represent the influence of cylinder wake. Eventually, the influence of pitching amplitude has also been discussed in the case of αA=15°. Different from the case of αA=5°, dynamic stall phenomenon emerges, and the influence of wake impingement could be barely detected from the mode information except for the third mode at the trough section. The detachment of the dynamic stall vortex takes place corresponding to the dynamic stall onset, which is driven by the streamwise pressure gradient near the trough leading-edge.