Liyun Xu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Liyun Xu has a total of 23 co-authors. Here are the top co-authors by number of shared publications:
- Huajie Chen
College of Textile and Clothing, Nantong University, Nantong 226019, China
2 shared publications - Lirong Yao
National & Local Joint Engineering Research Center of Technical Fiber Composites for Safety and Protection, Nantong University, Nantong 226019, China
2 shared publications - Ying Zhao
College of Textile and Clothing, Nantong University, Nantong 226019, China
2 shared publications - Bing Zhao
School of Textile and Clothing, Nantong University, Nantong 226019, China
1 shared publication Chengjiao Zhang
School of Textile and Clothing, Nantong University, Nantong City, China
1 shared publication- Jiehui Zhu
College of Textile and Clothing, Nantong University, Nantong 226019, China
1 shared publication
Latest Publications
- 5 October 2026
- Published by Springer Nature in Fibers and Polymers
- p. 1-11
Preparation and Properties of Superhydrophobic Copper–Carbon Antibacterial PET Fabric
- 5 October 2026
- Published by Springer Nature in Fibers and Polymers
- p. 1-11
Preparation and Properties of Superhydrophobic Copper–Carbon Antibacterial PET Fabric
- Open Access
Green Method for the Preparation of Durable Superhydrophobic Antimicrobial Polyester Fabrics with Micro-Pleated Structures
To produce functional protective textiles with minimal environmental footprints, we developed durable superhydrophobic antimicrobial textiles. These textiles are characterized by a micro-pleated structure on polyester fiber surfaces, achieved through a novel plasma impregnation crosslinking process. This process involved the use of water as the dispersion medium, water-soluble nanosilver monomers for antimicrobial efficacy, fluorine-free polydimethylsiloxane (PDMS) for hydrophobicity, and polyester (PET) fabric as the base material. The altered surface properties of these fabrics were extensively analyzed using scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectrometry (XPS), thermogravimetric analysis (TGA), and water contact angle (WCA) measurements. The antimicrobial performance of the strains was evaluated using Gram-negative Escherichia coli and Gram-positive Staphylococcus aureus. After treatment, the fabrics exhibited enhanced hydrophobic and antimicrobial properties, which was attributed to the presence of a micro-pleated structure and nanosilver. The modified textiles demonstrated a static WCA of approximately 154° and an impressive 99.99% inhibition rate against both test microbes. Notably, the WCA remained above 140° even after 500 washing cycles or 3000 friction cycles.
Open AccessGreen Method for the Preparation of Durable Superhydrophobic Antimicrobial Polyester Fabrics with Micro-Pleated Structures
To produce functional protective textiles with minimal environmental footprints, we developed durable superhydrophobic antimicrobial textiles. These textiles are characterized by a micro-pleated structure on polyester fiber surfaces, achieved through a novel plasma impregnation crosslinking process. This process involved the use of water as the dispersion medium, water-soluble nanosilver monomers for antimicrobial efficacy, fluorine-free polydimethylsiloxane (PDMS) for hydrophobicity, and polyester (PET) fabric as the base material. The altered surface properties of these fabrics were extensively analyzed using scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectrometry (XPS), thermogravimetric analysis (TGA), and water contact angle (WCA) measurements. The antimicrobial performance of the strains was evaluated using Gram-negative Escherichia coli and Gram-positive Staphylococcus aureus. After treatment, the fabrics exhibited enhanced hydrophobic and antimicrobial properties, which was attributed to the presence of a micro-pleated structure and nanosilver. The modified textiles demonstrated a static WCA of approximately 154° and an impressive 99.99% inhibition rate against both test microbes. Notably, the WCA remained above 140° even after 500 washing cycles or 3000 friction cycles.
- Open Access
Properties of Superhydrophobic and Acid–Alkali-Resistant Polyester Fabric Produced Using Plasma Processing
During the processes of production, storage, transportation and use of hazardous chemicals, acid–alkali corrosive liquid spatter and leakage would cause serious casualties. In order to protect the lives and health of staff, the surface of fabrics should be treated to obtain hydrophobicity and acid–alkali resistance. In this paper, polyester fabric was used as the base cloth, and polydimethylsiloxane (PDMS) and polytetrafluoroethylene (PTFE) micro-powder were used as the functional materials to fabricate waterproof and breathable fabric with good acid–alkali resistance using a method of plasma pretreatment-impregnation- and plasma-induced crosslinking. The effects of PDMS, PTFE powder and plasma-induced crosslinking on the surface and physical and chemical properties of fabric were investigated. It was found that the use of PDMS and PTFE powder had little effect on the mechanical and wearing comfort properties. However, it could significantly improve the acid–alkali resistance, as the liquid repellent rate of the treated fabric surface was higher than 80%, and the penetration index was lower than 2%.
Open AccessProperties of Superhydrophobic and Acid–Alkali-Resistant Polyester Fabric Produced Using Plasma Processing
During the processes of production, storage, transportation and use of hazardous chemicals, acid–alkali corrosive liquid spatter and leakage would cause serious casualties. In order to protect the lives and health of staff, the surface of fabrics should be treated to obtain hydrophobicity and acid–alkali resistance. In this paper, polyester fabric was used as the base cloth, and polydimethylsiloxane (PDMS) and polytetrafluoroethylene (PTFE) micro-powder were used as the functional materials to fabricate waterproof and breathable fabric with good acid–alkali resistance using a method of plasma pretreatment-impregnation- and plasma-induced crosslinking. The effects of PDMS, PTFE powder and plasma-induced crosslinking on the surface and physical and chemical properties of fabric were investigated. It was found that the use of PDMS and PTFE powder had little effect on the mechanical and wearing comfort properties. However, it could significantly improve the acid–alkali resistance, as the liquid repellent rate of the treated fabric surface was higher than 80%, and the penetration index was lower than 2%.
- Open Access
Construction of Durable Self-Cleaning PDMS Film on Polyester Fabric Surface
The superhydrophobic surface can be prepared by two methods; one is by reducing the surface energy, and the other is by constructing a micro-nano rough structure. To achieve high superhydrophobic performance in terms of durability, the firm combination of hydrophobic coating and substrate is particularly important. Here, we use polydimethylsiloxane (PDMS) as a low surface energy monomer, water-borne polyurethane (WPU) as a dispersing aid, and use high-power ultrasound to disperse PDMS in water to make emulsion. The polyester matrix is etched by atmospheric plasma, dipped in PDMS emulsion, dried, and finally baked to induce PDMS on the surface of polyester fiber to cross-link into film. A series of tests on the self-cleaning polyester fabric prepared by this method show that when the concentration of PDMS is 8 g/L and the mass ratio of PDMS to WPU is 20:1, the water contact angle (WCA) reaches the maximum value of 148.2°, which decreases to 141.5° after 200 times of washing and 138.6° after 5000 times of rubbing. Before and after PDMS coating, the tensile strength of polyester fabric increases from 489.4 N to 536.4 N, and the water vapor transmission decreases from 13,535.7 g/(m2·d) to 12,224.3 g/(m2·d). This research is helpful to the large-scale production of self-cleaning polyester fabric. In the future, on the basis of this research, we will add functional powder to endow self-cleaning polyester fabric with higher hydrophobicity and other properties.
Open AccessConstruction of Durable Self-Cleaning PDMS Film on Polyester Fabric Surface
The superhydrophobic surface can be prepared by two methods; one is by reducing the surface energy, and the other is by constructing a micro-nano rough structure. To achieve high superhydrophobic performance in terms of durability, the firm combination of hydrophobic coating and substrate is particularly important. Here, we use polydimethylsiloxane (PDMS) as a low surface energy monomer, water-borne polyurethane (WPU) as a dispersing aid, and use high-power ultrasound to disperse PDMS in water to make emulsion. The polyester matrix is etched by atmospheric plasma, dipped in PDMS emulsion, dried, and finally baked to induce PDMS on the surface of polyester fiber to cross-link into film. A series of tests on the self-cleaning polyester fabric prepared by this method show that when the concentration of PDMS is 8 g/L and the mass ratio of PDMS to WPU is 20:1, the water contact angle (WCA) reaches the maximum value of 148.2°, which decreases to 141.5° after 200 times of washing and 138.6° after 5000 times of rubbing. Before and after PDMS coating, the tensile strength of polyester fabric increases from 489.4 N to 536.4 N, and the water vapor transmission decreases from 13,535.7 g/(m2·d) to 12,224.3 g/(m2·d). This research is helpful to the large-scale production of self-cleaning polyester fabric. In the future, on the basis of this research, we will add functional powder to endow self-cleaning polyester fabric with higher hydrophobicity and other properties.