Jingbo Ji
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Jingbo Ji has a total of 11 co-authors. Here are the top co-authors by number of shared publications:
- Hao Zhang
Key Laboratory for Ecological Metallurgy of Multimetallic Mineral of Ministry of Education, School of Metallurgy, Northeastern University, Shenyang 110819, PR China
4 shared publications - Xizhong An
School of Metallurgy, Northeastern University, Shenyang, P.R. China
4 shared publications - Dongmin Yang
Institute for Materials and Processes, School of Engineering, University of Edinburgh, Edinburgh, UK
3 shared publications - Pengyue Guo2 shared publications
- Chao Li1 shared publication
- Haowei Yan1 shared publication
Latest Publications
- 1 September 2026
- Published by AIP Publishing in Physics of Fluids
- Vol. 38 (9)
Hydrodynamic interactions and rotational dynamics of tandem cylindrical particles in shear-thinning fluids
In this study, the torque, rotational dynamics, and steady-state orientation characteristics of tandem cylindrical particles in the linear shear flow of shear-thinning fluids are investigated using particle-resolved direct numerical simulation. The coupling mechanisms among fluid inertia, shear-thinning properties, shear strength, and particle spacing are revealed. The results indicate that the interaction between two particles significantly affects the torque coefficient, rotational velocity, and equilibrium orientation angle of the trailing particle, while having a smaller effect on the leading particle. Stronger shear-thinning reduces the torque coefficients of the two particles, while weakening the effect of particle–particle interactions on torque and rotational dynamics. The rotational behavior of the particles exhibits single directional rotation and damped oscillatory rotation. The rotational oscillation amplitude of the trailing particle is significantly larger than that of the leading particle, and it requires a longer time to reach a steady state. The steady-state orientations of the two cylindrical particles show the same orientation at low Reynolds numbers and opposite orientations at high Reynolds numbers. Multiplicative scaling-law relations are established to quantify the effects of the governing parameters on the torque coefficient and equilibrium orientation angle of the two particles. Finally, support vector regression models are established to predict the torque coefficient and equilibrium orientation angle of the two particles based on the governing variables. These findings enrich the dynamic theory of the interaction between multiple cylindrical particles and non-Newtonian fluids.
- 1 September 2026
- Published by AIP Publishing in Physics of Fluids
- Vol. 38 (9)
Hydrodynamic interactions and rotational dynamics of tandem cylindrical particles in shear-thinning fluids
In this study, the torque, rotational dynamics, and steady-state orientation characteristics of tandem cylindrical particles in the linear shear flow of shear-thinning fluids are investigated using particle-resolved direct numerical simulation. The coupling mechanisms among fluid inertia, shear-thinning properties, shear strength, and particle spacing are revealed. The results indicate that the interaction between two particles significantly affects the torque coefficient, rotational velocity, and equilibrium orientation angle of the trailing particle, while having a smaller effect on the leading particle. Stronger shear-thinning reduces the torque coefficients of the two particles, while weakening the effect of particle–particle interactions on torque and rotational dynamics. The rotational behavior of the particles exhibits single directional rotation and damped oscillatory rotation. The rotational oscillation amplitude of the trailing particle is significantly larger than that of the leading particle, and it requires a longer time to reach a steady state. The steady-state orientations of the two cylindrical particles show the same orientation at low Reynolds numbers and opposite orientations at high Reynolds numbers. Multiplicative scaling-law relations are established to quantify the effects of the governing parameters on the torque coefficient and equilibrium orientation angle of the two particles. Finally, support vector regression models are established to predict the torque coefficient and equilibrium orientation angle of the two particles based on the governing variables. These findings enrich the dynamic theory of the interaction between multiple cylindrical particles and non-Newtonian fluids.
- 1 October 2024
- Published by AIP Publishing in Physics of Fluids
- Vol. 36 (10)
Dynamics of non-Newtonian fluid–fiber interactions and void formation mechanism based on fused filament fabrication
Due to the presence of internal defects such as voids in the composites manufactured by material extrusion additive manufacturing (MEX AM), the mechanical properties of the composites are significantly below the theoretical optimum. Under this circumstance, this paper is intended to investigate the effects of nozzle feeding angles and to analyze the void formation and evolution of multiphase flow, in which systematic computational fluid dynamics numerical simulations are conducted. The volume of fluid model and overset grid method are used to simulate the extrusion deposition process of carbon fiber-reinforced polymer composites, and the Carreau model is used to represent the shear-thinning behavior of molten polymer. The numerical method is validated against previously experimental and numerical simulation data. The numerical results show that the key factor leading to void formation is the vortices caused by fiber oscillation. The intense vortex at the front end of the fibers disrupts the interface between molten polymer and air, creating a beneficial condition for air to enter. Nozzle tilting can effectively reduce the probability of void formation by decreasing the fiber oscillation velocity. The results of the present study provide insights into the development and optimization of printer nozzles to enable the printing of longer fibers with less probability of potential void formation.
- 1 October 2024
- Published by AIP Publishing in Physics of Fluids
- Vol. 36 (10)
Dynamics of non-Newtonian fluid–fiber interactions and void formation mechanism based on fused filament fabrication
Due to the presence of internal defects such as voids in the composites manufactured by material extrusion additive manufacturing (MEX AM), the mechanical properties of the composites are significantly below the theoretical optimum. Under this circumstance, this paper is intended to investigate the effects of nozzle feeding angles and to analyze the void formation and evolution of multiphase flow, in which systematic computational fluid dynamics numerical simulations are conducted. The volume of fluid model and overset grid method are used to simulate the extrusion deposition process of carbon fiber-reinforced polymer composites, and the Carreau model is used to represent the shear-thinning behavior of molten polymer. The numerical method is validated against previously experimental and numerical simulation data. The numerical results show that the key factor leading to void formation is the vortices caused by fiber oscillation. The intense vortex at the front end of the fibers disrupts the interface between molten polymer and air, creating a beneficial condition for air to enter. Nozzle tilting can effectively reduce the probability of void formation by decreasing the fiber oscillation velocity. The results of the present study provide insights into the development and optimization of printer nozzles to enable the printing of longer fibers with less probability of potential void formation.
- 1 August 2024
- Published by AIP Publishing in Physics of Fluids
- Vol. 36 (8)
Numerical study of the interaction between cylindrical particles and shear-thinning fluids in a linear shear flow
In this paper, the interaction between cylindrical particles and shear-thinning non-Newtonian fluids in a linear shear flow is investigated using particle-resolved direct numerical simulation. The Carreau model is used to represent the rheological properties of shear-thinning fluids, and the numerical method is validated against previously published data. Then, the effects of Reynolds number (Re), aspect ratio (Ar), power-law index (n), Carreau number (Cu), and incident angle (α) on drag coefficient (CD), lift coefficient (CL), and torque coefficient (CT) of cylindrical particles are investigated. The numerical results show that the flow field structure and pressure distribution around the cylindrical particle in a shear flow are different from those in a uniform flow, and the particles in a shear flow generate extra CL and CT. Furthermore, comparing with Newtonian fluids, the shear-thinning properties of the non-Newtonian fluid change the viscosity distribution and significantly decrease the CD, CL, and CT of the particles. The variation laws and influencing mechanisms of CD, CL, and CT under different working conditions are discussed by dividing the total coefficients into pressure and viscous shear contributions. Predictive correlations of CD, CL, and CT are established by considering the effects of Re, Ar, n, Cu, and α. The findings indicate that both the shear flow mode and shear-thinning properties must be considered when evaluating relevant particle–fluid interactions, which provides important guidance for predicting and controlling the orientation and distribution of cylindrical particles in shear-thinning fluids. Meanwhile, the predictive correlations can be used for large-scale simulations of multiphase coupling.
- 1 August 2024
- Published by AIP Publishing in Physics of Fluids
- Vol. 36 (8)
Numerical study of the interaction between cylindrical particles and shear-thinning fluids in a linear shear flow
In this paper, the interaction between cylindrical particles and shear-thinning non-Newtonian fluids in a linear shear flow is investigated using particle-resolved direct numerical simulation. The Carreau model is used to represent the rheological properties of shear-thinning fluids, and the numerical method is validated against previously published data. Then, the effects of Reynolds number (Re), aspect ratio (Ar), power-law index (n), Carreau number (Cu), and incident angle (α) on drag coefficient (CD), lift coefficient (CL), and torque coefficient (CT) of cylindrical particles are investigated. The numerical results show that the flow field structure and pressure distribution around the cylindrical particle in a shear flow are different from those in a uniform flow, and the particles in a shear flow generate extra CL and CT. Furthermore, comparing with Newtonian fluids, the shear-thinning properties of the non-Newtonian fluid change the viscosity distribution and significantly decrease the CD, CL, and CT of the particles. The variation laws and influencing mechanisms of CD, CL, and CT under different working conditions are discussed by dividing the total coefficients into pressure and viscous shear contributions. Predictive correlations of CD, CL, and CT are established by considering the effects of Re, Ar, n, Cu, and α. The findings indicate that both the shear flow mode and shear-thinning properties must be considered when evaluating relevant particle–fluid interactions, which provides important guidance for predicting and controlling the orientation and distribution of cylindrical particles in shear-thinning fluids. Meanwhile, the predictive correlations can be used for large-scale simulations of multiphase coupling.
- 1 April 2024
- Published by AIP Publishing in Physics of Fluids
- Vol. 36 (4)
Computational study on interaction between rotating non-spherical particles and shear-thinning fluids
In this paper, the drag coefficient (Cd), lift coefficient (Cl), and torque coefficient (Ct) of rotating non-spherical particles in shear-thinning non-Newtonian fluids are investigated based on particle-resolved direct numerical simulation. The Carreau model is used to describe the rheological behavior of non-Newtonian fluids, and the numerical model is validated against previously published data. Then, the effects of aspect ratio (Ar), spin number (Spa), flow index (n), and Carreau number (Cu) on Cd, Cl, and Ct of rotating non-spherical particles are investigated at different Reynolds numbers (Re). The numerical results show that the closer the particles are to the spherical shape, the smaller the fluctuations of Cd, Cl, and Ct curves. The peaks and valleys of Cd, Cl, and Ct of oblate and prolate ellipsoidal particles are reversely distributed. The fluctuations of Cd and Cl curves increase with increasing Spa. Cd decreases with increasing Spa at low Re, contrary to Newtonian fluids' results. Cd and Ct decrease with increasing shear-thinning properties, Cl increases with increasing shear-thinning properties, and the effect of shear-thinning properties decreases with increasing Re. The variation of viscosity and pressure is the main reason for the variation of Cd, Cl, and Ct under different variables. Predictive correlations of Cd and Ct are established based on Re, Spa, n, Cu, and α. The findings indicate that particle rotation and shear-thinning properties must be considered when evaluating particle-fluid interactions, which provide important guidance for predicting and controlling the orientation and distribution of non-spherical particles in non-Newtonian fluids.
- 1 April 2024
- Published by AIP Publishing in Physics of Fluids
- Vol. 36 (4)
Computational study on interaction between rotating non-spherical particles and shear-thinning fluids
In this paper, the drag coefficient (Cd), lift coefficient (Cl), and torque coefficient (Ct) of rotating non-spherical particles in shear-thinning non-Newtonian fluids are investigated based on particle-resolved direct numerical simulation. The Carreau model is used to describe the rheological behavior of non-Newtonian fluids, and the numerical model is validated against previously published data. Then, the effects of aspect ratio (Ar), spin number (Spa), flow index (n), and Carreau number (Cu) on Cd, Cl, and Ct of rotating non-spherical particles are investigated at different Reynolds numbers (Re). The numerical results show that the closer the particles are to the spherical shape, the smaller the fluctuations of Cd, Cl, and Ct curves. The peaks and valleys of Cd, Cl, and Ct of oblate and prolate ellipsoidal particles are reversely distributed. The fluctuations of Cd and Cl curves increase with increasing Spa. Cd decreases with increasing Spa at low Re, contrary to Newtonian fluids' results. Cd and Ct decrease with increasing shear-thinning properties, Cl increases with increasing shear-thinning properties, and the effect of shear-thinning properties decreases with increasing Re. The variation of viscosity and pressure is the main reason for the variation of Cd, Cl, and Ct under different variables. Predictive correlations of Cd and Ct are established based on Re, Spa, n, Cu, and α. The findings indicate that particle rotation and shear-thinning properties must be considered when evaluating particle-fluid interactions, which provide important guidance for predicting and controlling the orientation and distribution of non-spherical particles in non-Newtonian fluids.
- 1 January 2023
- Published by AIP Publishing in Physics of Fluids
- Vol. 35 (1)
Numerical simulation of the behaviors of single bubble in shear-thinning viscoelastic fluids
In this paper, the behaviors of single bubble in shear-thinning viscoelastic fluids were investigated using OpenFOAM. The volume-of-fluid method was used to capture the interface, and the Giesekus model was adopted for describing the rheological behaviors of shear-thinning viscoelastic fluids. The bubble cusp, negative wake and velocity jump phenomenons in viscoelastic fluids were obtained, and the effects of wall effect, mobility factor α and Weissenberg number (Wi) on bubble behaviors were investigated. The results showed that the viscoelastic stress is the main reason for the formation of bubble cusp, the relaxation of polymer macromolecules leads to the formation of negative wake, and the negative wake may be the main reason for the velocity jump. The open angle θ of the negative wake decreases and the distribution region in the vertical direction increases with the increasing Reynolds number (Re). As well as the magnitude of the maximum negative velocity increases with Re and appears further away from the bubble cusp. Moreover, decreasing the wall effect can accelerate the formation of viscoelastic stress and make the bubble cusp appear earlier. As the mobility factor α increases, the viscosity and viscoelastic stress of the fluid near the bubble decrease, this causes the terminal velocity of the bubble to increase. As the Wi increases, both the maximum velocity and terminal velocity of the bubble increase, and the time lag occur. The viscoelastic stress Τyy has a longer linear distribution at the tail of the bubble with Wi increases.
- 1 January 2023
- Published by AIP Publishing in Physics of Fluids
- Vol. 35 (1)
Numerical simulation of the behaviors of single bubble in shear-thinning viscoelastic fluids
In this paper, the behaviors of single bubble in shear-thinning viscoelastic fluids were investigated using OpenFOAM. The volume-of-fluid method was used to capture the interface, and the Giesekus model was adopted for describing the rheological behaviors of shear-thinning viscoelastic fluids. The bubble cusp, negative wake and velocity jump phenomenons in viscoelastic fluids were obtained, and the effects of wall effect, mobility factor α and Weissenberg number (Wi) on bubble behaviors were investigated. The results showed that the viscoelastic stress is the main reason for the formation of bubble cusp, the relaxation of polymer macromolecules leads to the formation of negative wake, and the negative wake may be the main reason for the velocity jump. The open angle θ of the negative wake decreases and the distribution region in the vertical direction increases with the increasing Reynolds number (Re). As well as the magnitude of the maximum negative velocity increases with Re and appears further away from the bubble cusp. Moreover, decreasing the wall effect can accelerate the formation of viscoelastic stress and make the bubble cusp appear earlier. As the mobility factor α increases, the viscosity and viscoelastic stress of the fluid near the bubble decrease, this causes the terminal velocity of the bubble to increase. As the Wi increases, both the maximum velocity and terminal velocity of the bubble increase, and the time lag occur. The viscoelastic stress Τyy has a longer linear distribution at the tail of the bubble with Wi increases.