Atul N. Yerpude
Research Subjects
Atul N. Yerpude has a total of 93 co-authors. Here are the top co-authors by number of shared publications:
S. J. Dhoble
Department of Physics, RTM Nagpur University, Nagpur, India
16 shared publicationsS.J. Dhoble
10 shared publicationsN.S. Kokode
8 shared publications- Sanjay Janaraoji Dhoble
Department of Physics, R.T.M. Nagpur University, Nagpur, India
8 shared publications Rupesh S. Wandhare
7 shared publicationsC. M. Nandanwar
Nutan Adarsh Arts, Comm. & Smt M. H. Wegad Science College, Nagpur, India
6 shared publications
Latest Publications
- 31 December 2025
- Published by Elsevier in Journal of Molecular Structure
- Vol. 1357
Development of red luminescent Eu3+ and Sm3+ activated calcium magnesium phosphate nanophosphors for solid-state lighting
- 31 December 2025
- Published by Elsevier in Journal of Molecular Structure
- Vol. 1357
Development of red luminescent Eu3+ and Sm3+ activated calcium magnesium phosphate nanophosphors for solid-state lighting
- 18 October 2025
- Published by Springer Nature in Chemical Papers
- Vol. 80 (1) , 1015-1024
Photoluminescence properties of NaSrBO3:Eu3+ phosphor n-UV based for solid state lighting application prepared by combustion synthesis
- 18 October 2025
- Published by Springer Nature in Chemical Papers
- Vol. 80 (1) , 1015-1024
Photoluminescence properties of NaSrBO3:Eu3+ phosphor n-UV based for solid state lighting application prepared by combustion synthesis
- 29 August 2025
- Published by Springer Nature in Journal of Fluorescence
- Vol. 35 (12) , 13201-13215
Influence of Sintering Temperature on Judd–Ofelt Parameters and Emission Properties of Y₁.₉₆Al₀.₀₄O₃:Eu3⁺ Phosphor for n-UV Excited Red Emission Applications
This study reports on the synthesis and photoluminescence characterization of Y₁.₉₆Al₀.₀₄O₃:Eu3⁺ phosphors prepared via the nitrate combustion method and subsequently sintered at temperatures of 600 °C, 800 °C, and 1000 °C. Structural analysis confirmed the formation of a well-crystallized cubic Y₂O₃ phase, with increasing sintering temperature enhancing crystallinity. Under 254 nm excitation, intense red emission centered at 613 nm was observed, corresponding to the hypersensitive 5D₀ → 7F₂ transition of Eu3⁺. The Judd–Ofelt parameters (Ω₂ and Ω₄) were extracted using an developed web-based tool https://omasgroup.org/joes-software/#page-content which is Application software for complete Judd–Ofelt analysis from the emission spectrum of europium doped materials, which automates the conversion of emission intensity ratios into JO parameters, thereby streamlining the otherwise manual and error-prone calculation process, even for Eu3⁺ systems. Judd–Ofelt analysis, based on emission spectra, revealed that the intensity parameter Ω₂ increased with sintering temperature, indicating enhanced asymmetry around Eu3⁺ sites. The highest Ω₂ value (3.969 × 10⁻2⁰ cm2) and corresponding radiative transition probability A(5D₀ → 7F₂) of 269.91 s⁻1 were achieved at 1000 °C, along with an internal quantum efficiency of approximately 55%. These results demonstrate the strong influence of thermal treatment on the optical performance of the phosphor. The material’s enhanced radiative properties, high quantum efficiency, and structural stability suggest its potential for near-UV LED-pumped red-emitting applications in solid-state lighting and display technologies.
- 29 August 2025
- Published by Springer Nature in Journal of Fluorescence
- Vol. 35 (12) , 13201-13215
Influence of Sintering Temperature on Judd–Ofelt Parameters and Emission Properties of Y₁.₉₆Al₀.₀₄O₃:Eu3⁺ Phosphor for n-UV Excited Red Emission Applications
This study reports on the synthesis and photoluminescence characterization of Y₁.₉₆Al₀.₀₄O₃:Eu3⁺ phosphors prepared via the nitrate combustion method and subsequently sintered at temperatures of 600 °C, 800 °C, and 1000 °C. Structural analysis confirmed the formation of a well-crystallized cubic Y₂O₃ phase, with increasing sintering temperature enhancing crystallinity. Under 254 nm excitation, intense red emission centered at 613 nm was observed, corresponding to the hypersensitive 5D₀ → 7F₂ transition of Eu3⁺. The Judd–Ofelt parameters (Ω₂ and Ω₄) were extracted using an developed web-based tool https://omasgroup.org/joes-software/#page-content which is Application software for complete Judd–Ofelt analysis from the emission spectrum of europium doped materials, which automates the conversion of emission intensity ratios into JO parameters, thereby streamlining the otherwise manual and error-prone calculation process, even for Eu3⁺ systems. Judd–Ofelt analysis, based on emission spectra, revealed that the intensity parameter Ω₂ increased with sintering temperature, indicating enhanced asymmetry around Eu3⁺ sites. The highest Ω₂ value (3.969 × 10⁻2⁰ cm2) and corresponding radiative transition probability A(5D₀ → 7F₂) of 269.91 s⁻1 were achieved at 1000 °C, along with an internal quantum efficiency of approximately 55%. These results demonstrate the strong influence of thermal treatment on the optical performance of the phosphor. The material’s enhanced radiative properties, high quantum efficiency, and structural stability suggest its potential for near-UV LED-pumped red-emitting applications in solid-state lighting and display technologies.
- Open Access
- 12 August 2025
- Published by Springer Nature in Journal of Optics
- p. 1-16
MATLAB simulation for optimization of Erbium-Doped fiber amplifier
- 12 August 2025
- Published by Springer Nature in Journal of Optics
- p. 1-16
Open AccessMATLAB simulation for optimization of Erbium-Doped fiber amplifier
- 1 July 2025
- Published by The Electrochemical Society in ECS Journal of Solid State Science and Technology
- Vol. 14 (7) , 073009
Multifunctional Mg0.6Zn0.4Fe2O4 Spinel Nanoferrite: Structural, Magnetic, Dielectric, Antimicrobial, and Plant Tissue Cultural Properties
This study presents the microwave-assisted sol-gel autocombustion synthesis of soft magnetic Mg0.6Zn0.4Fe2O4(MZF) and polyvinyl alcohol (PVA)-coated Mg0.6Zn0.4Fe2O4 (MZF@PVA) spinel nanoferrites. The structural, functional group, magnetic, and dielectric properties of these materials were thoroughly investigated using X-ray diffraction (XRD), Fourier Transform Infrared Spectroscopy (FTIR), Vibrating Sample Magnetometry (VSM), and an Impedance Analyzer. The structural analysis revealed crystallite sizes ranging from (31 to 35 nm) and lattice dimensions of (8.3769 to 8.3831 Å). These characteristics were influenced by induced lattice strain, measured at 3.581 × 10−3 to 3.584 × 10−3, and dislocations ranging from 0.99 × 10−3 1/nm2 to 0.80 × 10−3 1/nm2. FTIR analysis confirmed the presence of the Fe-O functional group, with a strong vibration band observed at 450 to 600 cm−1. Field Emission Scanning Electron Microscopy (FESEM) images showed spherical nanoparticles with slight agglomeration. Magnetic characterization via VSM indicated that these nanoferrites exhibit a soft magnetic pseudo-single domain nature, with coercivity values ranging from 77.29 to 81.66 Oe, magnetic saturation from 28.16 to 33.99 emu g−1, retentivity from 2.58 to 3.50 emu g−1, and a squareness ratio between 0.09 and 0.1. Furthermore, the MZF nanoferrite demonstrated significant biological activity. It effectively inhibited the growth of Escherichia coli and Pseudomonas aeruginosa in agar diffusion tests. Additionally, when applied to Vigna radiata (mung bean) plants, the nanoferrite promoted growth compared to untreated controls. These findings suggest that the synthesized MZF nanoferrite has promising potential for applications in bacterial growth inhibition and as a plant growth promoter.
- 1 July 2025
- Published by The Electrochemical Society in ECS Journal of Solid State Science and Technology
- Vol. 14 (7) , 073009
Multifunctional Mg0.6Zn0.4Fe2O4 Spinel Nanoferrite: Structural, Magnetic, Dielectric, Antimicrobial, and Plant Tissue Cultural Properties
This study presents the microwave-assisted sol-gel autocombustion synthesis of soft magnetic Mg0.6Zn0.4Fe2O4(MZF) and polyvinyl alcohol (PVA)-coated Mg0.6Zn0.4Fe2O4 (MZF@PVA) spinel nanoferrites. The structural, functional group, magnetic, and dielectric properties of these materials were thoroughly investigated using X-ray diffraction (XRD), Fourier Transform Infrared Spectroscopy (FTIR), Vibrating Sample Magnetometry (VSM), and an Impedance Analyzer. The structural analysis revealed crystallite sizes ranging from (31 to 35 nm) and lattice dimensions of (8.3769 to 8.3831 Å). These characteristics were influenced by induced lattice strain, measured at 3.581 × 10−3 to 3.584 × 10−3, and dislocations ranging from 0.99 × 10−3 1/nm2 to 0.80 × 10−3 1/nm2. FTIR analysis confirmed the presence of the Fe-O functional group, with a strong vibration band observed at 450 to 600 cm−1. Field Emission Scanning Electron Microscopy (FESEM) images showed spherical nanoparticles with slight agglomeration. Magnetic characterization via VSM indicated that these nanoferrites exhibit a soft magnetic pseudo-single domain nature, with coercivity values ranging from 77.29 to 81.66 Oe, magnetic saturation from 28.16 to 33.99 emu g−1, retentivity from 2.58 to 3.50 emu g−1, and a squareness ratio between 0.09 and 0.1. Furthermore, the MZF nanoferrite demonstrated significant biological activity. It effectively inhibited the growth of Escherichia coli and Pseudomonas aeruginosa in agar diffusion tests. Additionally, when applied to Vigna radiata (mung bean) plants, the nanoferrite promoted growth compared to untreated controls. These findings suggest that the synthesized MZF nanoferrite has promising potential for applications in bacterial growth inhibition and as a plant growth promoter.
- 1 July 2025
- Published by Wiley in Luminescence
- Vol. 40 (7) , e70241
Structure and Luminescence Properties of Novel Dy3+and Tb3+ Activated Ca10(PO4)6Cl2 Phosphors for Solid‐State Lighting Devices
The novel Dy3+‐and Tb3+‐doped Ca10(PO4)6Cl2 phosphor is synthesized by the conventional wet chemical technique. The XRD pattern of prepared Dy3+ and Tb3+ doped in host material is in well agreement with the PDF card no. 7032212. The SEM image shows that the size of the particle is non‐uniform in size and shape; it ranges in submicrometers. FTIR analysis confirms phosphate (PO4)3− and Ca‐O group bonding present in Ca10(PO4)6Cl2 phosphor. The photoluminescence spectra of the prepared Ca10(PO4)6Cl2:Dy3+ phosphor, under the excitation at 350 nm, it exhibit two emission peaks located at 474 nm (4F9/2 → 6H15/2) and 572 nm (4F9/2 → 6H13/2), emitting blue and orange color respectively. The high‐intensity peak is located at 474 nm. The PLE spectra of Ca10(PO4)6Cl2:Tb3+ phosphor contain two strong emission peaks centered at 470 (blue) nm and 543 (green) nm, these ascribed due to 5D4 → 7F6 & 5D4 → 7F5 transition of Tb3+ ions monitored at 354 and 379 nm excitation. The concentration quenching mechanism between the Dy3+–Dy3+ ions and Tb3+‐Tb3+ ions is primarily attributed to dipole–dipole (d–d) interactions. The results suggest that Ca10(PO4)6Cl2:RE (RE = Dy3+, Tb3+) phosphor shows promise for use as a near‐UV phosphor in solid‐state lighting applications.
- 1 July 2025
- Published by Wiley in Luminescence
- Vol. 40 (7) , e70241
Structure and Luminescence Properties of Novel Dy3+and Tb3+ Activated Ca10(PO4)6Cl2 Phosphors for Solid‐State Lighting Devices
The novel Dy3+‐and Tb3+‐doped Ca10(PO4)6Cl2 phosphor is synthesized by the conventional wet chemical technique. The XRD pattern of prepared Dy3+ and Tb3+ doped in host material is in well agreement with the PDF card no. 7032212. The SEM image shows that the size of the particle is non‐uniform in size and shape; it ranges in submicrometers. FTIR analysis confirms phosphate (PO4)3− and Ca‐O group bonding present in Ca10(PO4)6Cl2 phosphor. The photoluminescence spectra of the prepared Ca10(PO4)6Cl2:Dy3+ phosphor, under the excitation at 350 nm, it exhibit two emission peaks located at 474 nm (4F9/2 → 6H15/2) and 572 nm (4F9/2 → 6H13/2), emitting blue and orange color respectively. The high‐intensity peak is located at 474 nm. The PLE spectra of Ca10(PO4)6Cl2:Tb3+ phosphor contain two strong emission peaks centered at 470 (blue) nm and 543 (green) nm, these ascribed due to 5D4 → 7F6 & 5D4 → 7F5 transition of Tb3+ ions monitored at 354 and 379 nm excitation. The concentration quenching mechanism between the Dy3+–Dy3+ ions and Tb3+‐Tb3+ ions is primarily attributed to dipole–dipole (d–d) interactions. The results suggest that Ca10(PO4)6Cl2:RE (RE = Dy3+, Tb3+) phosphor shows promise for use as a near‐UV phosphor in solid‐state lighting applications.
- 5 May 2025
- Published by Elsevier in Optical Materials
- Vol. 165
Investigation of structural, microstructural and optical properties of Ca3B2O6:Sm3+ downshifting phosphor
- 5 May 2025
- Published by Elsevier in Optical Materials
- Vol. 165
Investigation of structural, microstructural and optical properties of Ca3B2O6:Sm3+ downshifting phosphor