Igor de M. Figueredo
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Igor de M. Figueredo has a total of 16 co-authors. Here are the top co-authors by number of shared publications:
- Celio Loureiro Cavalcante
Grupo de Pesquisa em Separações por Adsorção (GPSA), Departamento de Engenharia Química, Campus do Pici, Universidade Federal do Ceará, Fortaleza 60455760, Brazil
4 shared publications - Francisco Murilo Tavares Luna
Grupo de Pesquisa em Separações por Adsorção (GPSA), Departamento de Engenharia Química, Campus do Pici, Universidade Federal do Ceará, Fortaleza 60455760, Brazil
4 shared publications - Gustavo Ross Ribeiro Lima
Grupo de Pesquisa em Separações por Adsorção (GPSA), Departamento de Engenharia Química, Campus do Pici, Universidade Federal do Ceará, Fortaleza 60455760, Brazil
2 shared publications - Maria Alexsandra de Sousa Rios
Grupo de Inovações Tecnológicas e Especialidades Químicas, Departamento de Engenharia Mecânica, Universidade Federal do Ceará, Campus do Pici, Bl. 714, Fortaleza 60440-554, Brazil
2 shared publications - Maria Marliete Fernandes de Melo Neta
Grupo de Pesquisa em Separações por Adsorção (GPSA), Departamento de Engenharia Química, Campus do Pici, Universidade Federal do Ceará, Fortaleza 60455760, Brazil
2 shared publications - Paulo R. C. F. Ribeiro Filho
Departamento de Engenharia Mecânica, Universidade Estadual do Maranhão, São Luís 65055310, Brazil
2 shared publications
Latest Publications
- Open Access
Macauba Kernel Oil: Refining, Transesterification, and Density/Viscosity of Blends B15 to B20 with Mineral Diesel
Macauba is a versatile palm and has been explored in various sectors due to its ability to produce oils, proteins, energy, and biofuels. This paper presents the extraction, refining, and characterization of the macauba kernel oil, the synthesis of biodiesel, and an evaluation of the density and viscosity of its blends with mineral diesel, ranging from B15 to B20. Conversion was determined using the integral areas of the 1H NMR spectrum for the FAME methyl ester (3.62, -CH3) and FAME carbonyl (2.26, -COOCH2). Predictions of the key inputs required for the extraction and degumming of the macauba kernel oil, as well as for the biodiesel production, are also presented. These results provide valuable insights into diesel-biodiesel blends exceeding 14% (vol.) of biodiesel, thereby contributing to the expansion of the biofuels industry.
Open AccessMacauba Kernel Oil: Refining, Transesterification, and Density/Viscosity of Blends B15 to B20 with Mineral Diesel
Macauba is a versatile palm and has been explored in various sectors due to its ability to produce oils, proteins, energy, and biofuels. This paper presents the extraction, refining, and characterization of the macauba kernel oil, the synthesis of biodiesel, and an evaluation of the density and viscosity of its blends with mineral diesel, ranging from B15 to B20. Conversion was determined using the integral areas of the 1H NMR spectrum for the FAME methyl ester (3.62, -CH3) and FAME carbonyl (2.26, -COOCH2). Predictions of the key inputs required for the extraction and degumming of the macauba kernel oil, as well as for the biodiesel production, are also presented. These results provide valuable insights into diesel-biodiesel blends exceeding 14% (vol.) of biodiesel, thereby contributing to the expansion of the biofuels industry.
- Open Access
- 12 November 2023
- Published by MDPI AG in Lubricants
- Vol. 11 (11) , 490
Thermo-Oxidative Stability and Tribological Properties of Biolubricants Obtained from Castor Oil Fatty Acids and Isoamyl Alcohol
In this study, the thermo-oxidative stability and tribological behavior of bio-based lubricant samples synthesized from castor oil using isoamyl alcohol were evaluated. Initially, the compositional and physicochemical properties of the obtained samples were assessed using the 1H NMR, FTIR and ASTM methods. Oxidative stability of the samples was evaluated using the Rancimat method at 110 °C under air flow. The final biolubricant sample (BL2), obtained after esterification, epoxidation and oxirane rings opening reactions, presented an oxidation stability time (OST) of 14.3 h. The thermal stability was also evaluated by thermogravimetry (TG) from the mass variations under inert and oxidative atmosphere. BL2 showed higher thermal stability compared to the other samples, demonstrating higher decomposition temperatures in both inert (339.04 °C) and oxidative (338.47 °C) atmospheres, for a mass loss of 50%. The tribological properties of the samples were evaluated using a four-ball tribometer configuration. The BL1 and BL2 samples exhibited lower friction coefficients than the mineral oil sample (MOS) by 21.5% and 43.1%, respectively. Regarding wear, the observed wear scar diameter (WSD) was also lower in BL1 and BL2 compared to MOS by 5.2% and 40.4%, respectively. The results of the tribological evaluation suggest that both samples (BL1 and BL2) have promising potential for applications in lubricating machines.
- 12 November 2023
- Published by MDPI AG in Lubricants
- Vol. 11 (11) , 490
Open AccessThermo-Oxidative Stability and Tribological Properties of Biolubricants Obtained from Castor Oil Fatty Acids and Isoamyl Alcohol
In this study, the thermo-oxidative stability and tribological behavior of bio-based lubricant samples synthesized from castor oil using isoamyl alcohol were evaluated. Initially, the compositional and physicochemical properties of the obtained samples were assessed using the 1H NMR, FTIR and ASTM methods. Oxidative stability of the samples was evaluated using the Rancimat method at 110 °C under air flow. The final biolubricant sample (BL2), obtained after esterification, epoxidation and oxirane rings opening reactions, presented an oxidation stability time (OST) of 14.3 h. The thermal stability was also evaluated by thermogravimetry (TG) from the mass variations under inert and oxidative atmosphere. BL2 showed higher thermal stability compared to the other samples, demonstrating higher decomposition temperatures in both inert (339.04 °C) and oxidative (338.47 °C) atmospheres, for a mass loss of 50%. The tribological properties of the samples were evaluated using a four-ball tribometer configuration. The BL1 and BL2 samples exhibited lower friction coefficients than the mineral oil sample (MOS) by 21.5% and 43.1%, respectively. Regarding wear, the observed wear scar diameter (WSD) was also lower in BL1 and BL2 compared to MOS by 5.2% and 40.4%, respectively. The results of the tribological evaluation suggest that both samples (BL1 and BL2) have promising potential for applications in lubricating machines.
- Open Access
- 19 September 2023
- Published by MDPI AG in Preprints.org
Thermo-Oxidative Stability and Tribological Characteristics of Bio-Based Lubricants Synthesized Using Isoamyl Alcohol
Castor oil may be differentiated from other non-edible vegetable oils because of its main composition of hydroxylated fatty acids. Ricinoleic acid comprises 80–90% wt. of fatty acids in castor oil (Ricinus communis). In this study, the thermo-oxidative stability and tribological behavior of bio-based lubricant samples synthesized from castor oil using isoamyl alcohol were evaluated. Initially, the compositional and physicochemical properties of the obtained samples were assessed using 1H NMR, FTIR, and ASTM methods. Oxidative stability of the samples was evaluated using Rancimat method at 110 °C under air flow. The final biolubricant sample (BL2), obtained after esterification, epoxidation, and oxirane rings opening reactions, presented an oxidation stability time (OST) of 14.3 h. The thermal stability was also evaluated by thermogravimetry (TG) from the mass variations under inert and oxidative atmosphere. BL2 showed higher thermal stability compared to the other samples, demonstrating higher decomposition temperatures in both inert (339.04 °C) and oxidative (338.47 °C) atmospheres, for a mass loss of 50%. The tribological properties of the samples were evaluated using a four-ball tribometer configuration. The BL1 and BL2 samples exhibited lower friction coefficients than the mineral oil sample (MOS) by 21.5% and 43.1%, respectively. Regarding wear, the observed wear scar diameter (WSD) was also lower in BL1 and BL2 compared to MOS by 5.2% and 40.4%, respectively. The results of the tribological evaluation suggest that both samples obtained in this study have promising potential for applications in lubricating machines and mechanical systems.
- 19 September 2023
- Published by MDPI AG in Preprints.org
Open AccessThermo-Oxidative Stability and Tribological Characteristics of Bio-Based Lubricants Synthesized Using Isoamyl Alcohol
Castor oil may be differentiated from other non-edible vegetable oils because of its main composition of hydroxylated fatty acids. Ricinoleic acid comprises 80–90% wt. of fatty acids in castor oil (Ricinus communis). In this study, the thermo-oxidative stability and tribological behavior of bio-based lubricant samples synthesized from castor oil using isoamyl alcohol were evaluated. Initially, the compositional and physicochemical properties of the obtained samples were assessed using 1H NMR, FTIR, and ASTM methods. Oxidative stability of the samples was evaluated using Rancimat method at 110 °C under air flow. The final biolubricant sample (BL2), obtained after esterification, epoxidation, and oxirane rings opening reactions, presented an oxidation stability time (OST) of 14.3 h. The thermal stability was also evaluated by thermogravimetry (TG) from the mass variations under inert and oxidative atmosphere. BL2 showed higher thermal stability compared to the other samples, demonstrating higher decomposition temperatures in both inert (339.04 °C) and oxidative (338.47 °C) atmospheres, for a mass loss of 50%. The tribological properties of the samples were evaluated using a four-ball tribometer configuration. The BL1 and BL2 samples exhibited lower friction coefficients than the mineral oil sample (MOS) by 21.5% and 43.1%, respectively. Regarding wear, the observed wear scar diameter (WSD) was also lower in BL1 and BL2 compared to MOS by 5.2% and 40.4%, respectively. The results of the tribological evaluation suggest that both samples obtained in this study have promising potential for applications in lubricating machines and mechanical systems.
- Open Access
- 22 December 2022
- Published by LIDSEN Publishing Inc in Journal of Energy and Power Technology
- Vol. 04 (04) , 1-21
Evaluation of Oxidative Stability and Kinetic Parameters of the Cottonseed and Soybean Biodiesels by Rancimat and Differential Scanning Calorimetry Techniques
In this study, the oxidative stability of the cottonseed oil biodiesel (CB) and soybean oil biodiesel (SB) was investigated by two methodologies, Rancimat and Differential Scanning Calorimetry (DSC), using samples fresh and aged (mid-term storage condition (100 days)). The biodiesel samples were synthesized by transesterification and characterized by specific mass, kinematic viscosity, acidity value, ester content, viscosity index, and peroxide value. The activation energy (Ea), Arrhenius pre-exponential factor (Z), reaction order (n), and reaction rate at constant temperature (k(T)) were calculated by Borchardt and Daniels method. The results showed that oxidation affected the physicochemical properties of the biodiesel samples, especially, acidity (mg KOH/g), peroxide value (meq/1000 g), and induction period, with a decrease of around 55% for CB and 29% for SB. For kinetic parameters, the k(T) of both aged samples presented the highest values, with an increase of around 314% for SB. It was also observed that the rate constants increased with decreasing values of the induction period, in agreement with the current literature. According to the evaluation, the Borchardt and Daniels method can be recommended for a quick assessment of the biodiesel oxidation kinetic parameters.
- 22 December 2022
- Published by LIDSEN Publishing Inc in Journal of Energy and Power Technology
- Vol. 04 (04) , 1-21
Open AccessEvaluation of Oxidative Stability and Kinetic Parameters of the Cottonseed and Soybean Biodiesels by Rancimat and Differential Scanning Calorimetry Techniques
In this study, the oxidative stability of the cottonseed oil biodiesel (CB) and soybean oil biodiesel (SB) was investigated by two methodologies, Rancimat and Differential Scanning Calorimetry (DSC), using samples fresh and aged (mid-term storage condition (100 days)). The biodiesel samples were synthesized by transesterification and characterized by specific mass, kinematic viscosity, acidity value, ester content, viscosity index, and peroxide value. The activation energy (Ea), Arrhenius pre-exponential factor (Z), reaction order (n), and reaction rate at constant temperature (k(T)) were calculated by Borchardt and Daniels method. The results showed that oxidation affected the physicochemical properties of the biodiesel samples, especially, acidity (mg KOH/g), peroxide value (meq/1000 g), and induction period, with a decrease of around 55% for CB and 29% for SB. For kinetic parameters, the k(T) of both aged samples presented the highest values, with an increase of around 314% for SB. It was also observed that the rate constants increased with decreasing values of the induction period, in agreement with the current literature. According to the evaluation, the Borchardt and Daniels method can be recommended for a quick assessment of the biodiesel oxidation kinetic parameters.