Jing Wu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Jing Wu has a total of 27 co-authors. Here are the top co-authors by number of shared publications:
- Yangtao Ge
Department of Mechanical and Energy Engineering, Southern University of Science and Technology (SUSTech), Shenzhen, China
3 shared publications - Zhenzhong Jia
Shenzhen Key Laboratory of Biomimetic Robotics and Intelligent Systems, Department of Mechanical and Energy Engineering, Southern University of Science and Technology, Shenzhen, China
3 shared publications - Zirui Wang
Department of Mechanical and Energy Engineering, Southern University of Science and Technology (SUSTech), Shenzhen, China
3 shared publications Bangzhen Huang
Department of Mechanical and Energy Engineering, Southern University of Science and Technology, Shenzhen, Guangdong Province, P R China
2 shared publicationsHaoran Kang
Department of Mechanical and Energy Engineering, Southern University of Science and Technology, Shenzhen, Guangdong Province, P R China
2 shared publications- I-Ming Chen
Nanyang Technological University
2 shared publications
Latest Publications
- 1 September 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- Vol. 11 (9) , 10712-10719
FAST-LIEO2: Fast and Tightly-Coupled LiDAR-Inertial-Event Odometry
- 1 September 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- Vol. 11 (9) , 10712-10719
FAST-LIEO2: Fast and Tightly-Coupled LiDAR-Inertial-Event Odometry
- 18 September 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Vehicular Technology
- Vol. 75 (3) , 3940-3956
Collision Dynamics Model and Self-Learning Control for 4WIS Vehicles
Vehicles at high speeds are prone to losing control due to the initial impact, which can potentially lead to more severe secondary collisions. An effective post-impact control (PIC) strategy can restore the vehicle's stability after the initial collision, reducing the risk of secondary collisions. This paper proposes a robust four-wheel independent steering (4WIS) PIC strategy that is based on deep reinforcement learning (DRL); it is capable of automatically adapting to different road adhesion conditions. To our best knowledge, this paper presents the first real-world experimental validation of a DRL-based PIC strategy. We propose an 8-DOF vehicle collision dynamics model to construct a reinforcement learning training environment, and design a reward function to guide the agent in controlling the vehicle to return to its target path and achieve a safe yaw angle. We randomize a specific parameter in the tire model to simulate different road adhesion conditions and enhance the robustness. The PIC strategy can restore the vehicle's post-impact stability under different speeds and road adhesion conditions, reduce lateral post-impact errors, and return the vehicle to a safe yaw angle, further lowering the risk of secondary collisions. The model's validity was confirmed by comparing the dynamic responses of the proposed model with those of the CarSim model. The effectiveness and generalizability of the proposed PIC strategy were further verified on the CarSim and MATLAB/Simulink joint simulation platform. And experiments were conducted using a specially developed down-scaled vehicle to validate the feasibility and real-time performance of the proposed PIC strategy.
- 18 September 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Vehicular Technology
- Vol. 75 (3) , 3940-3956
Collision Dynamics Model and Self-Learning Control for 4WIS Vehicles
Vehicles at high speeds are prone to losing control due to the initial impact, which can potentially lead to more severe secondary collisions. An effective post-impact control (PIC) strategy can restore the vehicle's stability after the initial collision, reducing the risk of secondary collisions. This paper proposes a robust four-wheel independent steering (4WIS) PIC strategy that is based on deep reinforcement learning (DRL); it is capable of automatically adapting to different road adhesion conditions. To our best knowledge, this paper presents the first real-world experimental validation of a DRL-based PIC strategy. We propose an 8-DOF vehicle collision dynamics model to construct a reinforcement learning training environment, and design a reward function to guide the agent in controlling the vehicle to return to its target path and achieve a safe yaw angle. We randomize a specific parameter in the tire model to simulate different road adhesion conditions and enhance the robustness. The PIC strategy can restore the vehicle's post-impact stability under different speeds and road adhesion conditions, reduce lateral post-impact errors, and return the vehicle to a safe yaw angle, further lowering the risk of secondary collisions. The model's validity was confirmed by comparing the dynamic responses of the proposed model with those of the CarSim model. The effectiveness and generalizability of the proposed PIC strategy were further verified on the CarSim and MATLAB/Simulink joint simulation platform. And experiments were conducted using a specially developed down-scaled vehicle to validate the feasibility and real-time performance of the proposed PIC strategy.
- 26 December 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- Vol. 10 (2) , 1680-1687
FAST-LIEO: Fast and Real-Time LiDAR-Inertial-Event-Visual Odometry
Unlike a standard camera that relies on exposure to obtain output frame by frame, an event camera only outputs an event when the change of brightness intensity in a pixel exceeds a threshold, and the outputs of different pixels are independent to each other. Benefited from its bio-inspired design, event camera has the advantages of low latency and high dynamic range. The researches on multi-sensor fusion with event camera are few so far. In this paper, we propose FAST-LIEO, a framework for fast and real-time LiDAR-inertial-event odometry. The framework tightly fuses LiDAR and event camera measurements without any feature extraction or matching. Besides, our system supports both LIEO and LIEVO (extended with RGB camera fusion). We design a novel EIO subsystem for LiDAR-event fusion. The EIO subsystem maintains a semi-dense event map and estimates the state by aligning the event representation to map. The semi-dense event map is built from LiDAR points by utilizing the edge information and temporal information provided by event representations. Besides testing our method on public benchmark dataset, we also collected real-world data by utilizing our sensor suite and conducted experiments on our self-captured dataset. The experiment results show the high robustness and accuracy of our method in challenging conditions with high real-time ability. To the best of our knowledge, our FAST-LIEO is the first system that can tightly fuse LiDAR, IMU, event camera and standard camera measurements in simultaneously localization and mapping.
- 26 December 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- Vol. 10 (2) , 1680-1687
FAST-LIEO: Fast and Real-Time LiDAR-Inertial-Event-Visual Odometry
Unlike a standard camera that relies on exposure to obtain output frame by frame, an event camera only outputs an event when the change of brightness intensity in a pixel exceeds a threshold, and the outputs of different pixels are independent to each other. Benefited from its bio-inspired design, event camera has the advantages of low latency and high dynamic range. The researches on multi-sensor fusion with event camera are few so far. In this paper, we propose FAST-LIEO, a framework for fast and real-time LiDAR-inertial-event odometry. The framework tightly fuses LiDAR and event camera measurements without any feature extraction or matching. Besides, our system supports both LIEO and LIEVO (extended with RGB camera fusion). We design a novel EIO subsystem for LiDAR-event fusion. The EIO subsystem maintains a semi-dense event map and estimates the state by aligning the event representation to map. The semi-dense event map is built from LiDAR points by utilizing the edge information and temporal information provided by event representations. Besides testing our method on public benchmark dataset, we also collected real-world data by utilizing our sensor suite and conducted experiments on our self-captured dataset. The experiment results show the high robustness and accuracy of our method in challenging conditions with high real-time ability. To the best of our knowledge, our FAST-LIEO is the first system that can tightly fuse LiDAR, IMU, event camera and standard camera measurements in simultaneously localization and mapping.
- 30 May 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- Vol. 9 (7) , 6696-6703
TAIL: A Terrain-Aware Multi-Modal SLAM Dataset for Robot Locomotion in Deformable Granular Environments
Terrain-aware perception holds the potential to improve the robustness and accuracy of autonomous robot navigation in the wilds, thereby facilitating effective off-road traversals. However, the lack of multi-modal perception across various motion patterns hinders the solutions of Simultaneous Localization And Mapping (SLAM), especially when confronting non-geometric hazards in demanding landscapes. In this paper, we first propose a Terrain-Aware multI-modaL (TAIL) dataset tailored to deformable and sandy terrains. It incorporates various types of robotic proprioception and distinct ground interactions for the unique challenges and benchmark of multi-sensor fusion SLAM. The versatile sensor suite comprises stereo frame cameras, multiple ground-pointing RGB-D cameras, a rotating 3D LiDAR, an IMU, and an RTK device. This ensemble is hardware-synchronized, well-calibrated, and self-contained. Utilizing both wheeled and quadrupedal locomotion, we efficiently collect comprehensive sequences to capture rich unstructured scenarios. It spans the spectrum of scope, terrain interactions, scene changes, ground-level properties, and dynamic robot characteristics. We benchmark several state-of-the-art SLAM methods against ground truth and provide performance validations. Corresponding challenges and limitations are also reported.
- 30 May 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- Vol. 9 (7) , 6696-6703
TAIL: A Terrain-Aware Multi-Modal SLAM Dataset for Robot Locomotion in Deformable Granular Environments
Terrain-aware perception holds the potential to improve the robustness and accuracy of autonomous robot navigation in the wilds, thereby facilitating effective off-road traversals. However, the lack of multi-modal perception across various motion patterns hinders the solutions of Simultaneous Localization And Mapping (SLAM), especially when confronting non-geometric hazards in demanding landscapes. In this paper, we first propose a Terrain-Aware multI-modaL (TAIL) dataset tailored to deformable and sandy terrains. It incorporates various types of robotic proprioception and distinct ground interactions for the unique challenges and benchmark of multi-sensor fusion SLAM. The versatile sensor suite comprises stereo frame cameras, multiple ground-pointing RGB-D cameras, a rotating 3D LiDAR, an IMU, and an RTK device. This ensemble is hardware-synchronized, well-calibrated, and self-contained. Utilizing both wheeled and quadrupedal locomotion, we efficiently collect comprehensive sequences to capture rich unstructured scenarios. It spans the spectrum of scope, terrain interactions, scene changes, ground-level properties, and dynamic robot characteristics. We benchmark several state-of-the-art SLAM methods against ground truth and provide performance validations. Corresponding challenges and limitations are also reported.
- 11 April 2024
- Published by Cambridge University Press (CUP) in Robotica
- Vol. 42 (7) , 2150-2168
Automatic extrinsic calibration for structured light camera and repetitive LiDARs
The integration of camera and LiDAR technologies has the potential to significantly enhance construction robots’ perception capabilities by providing complementary construction information. Structured light cameras (SLCs) are a desirable alternative as they provide comprehensive information on construction defects. However, fusing these two types of information depends largely on the sensors’ relative positions, which can only be established through extrinsic calibration. This paper introduces a novel calibration algorithm considering a customized board for SLCs and repetitive LiDARs, which are designed to facilitate the automation of construction robots. The calibration board is equipped with four symmetrically distributed hemispheres, whose centers are obtained by fitting the spheres and adoption with the geometric constraints. Subsequently, the spherical centers serve as reference features to estimate the relationship between the sensors. These distinctive features enable our proposed method to only require one calibration board pose and minimize human intervention. We conducted both simulation and real-world experiments to assess the performance of our algorithm. And the results demonstrate that our method exhibits enhanced accuracy and robustness.
- 11 April 2024
- Published by Cambridge University Press (CUP) in Robotica
- Vol. 42 (7) , 2150-2168
Automatic extrinsic calibration for structured light camera and repetitive LiDARs
The integration of camera and LiDAR technologies has the potential to significantly enhance construction robots’ perception capabilities by providing complementary construction information. Structured light cameras (SLCs) are a desirable alternative as they provide comprehensive information on construction defects. However, fusing these two types of information depends largely on the sensors’ relative positions, which can only be established through extrinsic calibration. This paper introduces a novel calibration algorithm considering a customized board for SLCs and repetitive LiDARs, which are designed to facilitate the automation of construction robots. The calibration board is equipped with four symmetrically distributed hemispheres, whose centers are obtained by fitting the spheres and adoption with the geometric constraints. Subsequently, the spherical centers serve as reference features to estimate the relationship between the sensors. These distinctive features enable our proposed method to only require one calibration board pose and minimize human intervention. We conducted both simulation and real-world experiments to assess the performance of our algorithm. And the results demonstrate that our method exhibits enhanced accuracy and robustness.
- 23 December 2022
- Published by Cambridge University Press (CUP) in Robotica
- Vol. 41 (4) , 1258-1274
A high-accuracy hollowness inspection system with sensor fusion of ultra-wide-band radar and depth camera
With the dangerous and troublesome nature of hollow defects inside building structures, hollowness inspection has always been a challenge in the field of construction quality assessment. Several methods have been proposed for inspecting hollowness inside concrete structures. These methods have shown great advantages compared to manual inspection but still lack autonomy and have several limitations. In this paper, we propose a range-point migration-based non-contact hollowness inspection system with sensor fusion of ultra-wide-band radar and laser-based depth camera to extract both outer surface and inner hollowness information accurately and efficiently. The simulation result evaluates the performance of the system based on the original range-point migration algorithm, and our proposed one and the result of our system show great competitiveness. Several simulation experiments of structures that are very common in reality are carried out to draw more convincing conclusions about the system. At the same time, a set of laboratory-made concrete components were used as experimental objects for the robotic system. Although still accompanied by some problems, these experiments demonstrate the availability of an automated hollow-core detection system.
- 23 December 2022
- Published by Cambridge University Press (CUP) in Robotica
- Vol. 41 (4) , 1258-1274
A high-accuracy hollowness inspection system with sensor fusion of ultra-wide-band radar and depth camera
With the dangerous and troublesome nature of hollow defects inside building structures, hollowness inspection has always been a challenge in the field of construction quality assessment. Several methods have been proposed for inspecting hollowness inside concrete structures. These methods have shown great advantages compared to manual inspection but still lack autonomy and have several limitations. In this paper, we propose a range-point migration-based non-contact hollowness inspection system with sensor fusion of ultra-wide-band radar and laser-based depth camera to extract both outer surface and inner hollowness information accurately and efficiently. The simulation result evaluates the performance of the system based on the original range-point migration algorithm, and our proposed one and the result of our system show great competitiveness. Several simulation experiments of structures that are very common in reality are carried out to draw more convincing conclusions about the system. At the same time, a set of laboratory-made concrete components were used as experimental objects for the robotic system. Although still accompanied by some problems, these experiments demonstrate the availability of an automated hollow-core detection system.