Naeim Roshan
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Naeim Roshan has a total of 11 co-authors. Here are the top co-authors by number of shared publications:
- Mansour Ghalehnovi
School of Engineering, Ferdowsi University of Mashhad, Mashhad, Iran
3 shared publications - Hamzeh Hajiloo
Department of Civil and Environmental Engineering, Carleton University, Ottawa, Canada
2 shared publications - Hosseinali Rahdar
University of Zabol
1 shared publication Kambiz Daneshvar
1 shared publicationM. Javad Moradi
1 shared publicationMajid Hamidi
1 shared publication
Latest Publications
- Open Access
- 20 January 2026
- Published by Elsevier in Engineering Structures
- Vol. 353
Constitutive modelling of transient thermal strain in high-strength concrete: Validation using a loaded 28-year-old column
- 20 January 2026
- Published by Elsevier in Engineering Structures
- Vol. 353
Open AccessConstitutive modelling of transient thermal strain in high-strength concrete: Validation using a loaded 28-year-old column
- Open Access
- 10 March 2025
- Published by Elsevier in Construction and Building Materials
- Vol. 471
Enhancing flexural and shear capacities of RC T-beams with FRCM incorporating a full FRCM-concrete bond
- 10 March 2025
- Published by Elsevier in Construction and Building Materials
- Vol. 471
Open AccessEnhancing flexural and shear capacities of RC T-beams with FRCM incorporating a full FRCM-concrete bond
- Open Access
- 27 June 2023
- Published by Elsevier in Case Studies in Construction Materials
- Vol. 19
The effect of recycled-tire steel fiber and engineered steel fiber on rebar corrosion and shear behavior of corroded RC beam
- 27 June 2023
- Published by Elsevier in Case Studies in Construction Materials
- Vol. 19
Open AccessThe effect of recycled-tire steel fiber and engineered steel fiber on rebar corrosion and shear behavior of corroded RC beam
- 1 March 2023
- Published by American Society of Civil Engineers (ASCE) in Journal of Materials in Civil Engineering
- Vol. 35 (3) , 04022460
Effect of Marble Waste Powder and Silica Fume on the Bond Behavior of Corroded Reinforcing Bar Embedded in Concrete
Bond behavior is the mutual effect and the force transmission between concrete and reinforcing bar that directly influence the behavior of reinforced concrete structures. Considering the silica fume (SF) and marble waste powder (MWP) could enhance the concrete matrix and improve its adherence, the bond-slip behavior of corroded reinforcing bar in concrete containing SF and MWP as ordinary portland cement (OPC) is examined in this work. Three of 16 concrete mixes were selected for this investigation: one control mix, a second mix containing 10% SF and 5% MWP as OPC replacements, and the third containing 10% SF and 20% MWP as OPC replacements. The pullout test was applied to the specimens with 0%, 2%, 5%, and 10% corroded reinforcement. According to the results of specimens with uncorroded reinforcement, replacing 10% of cement by SF and 5% or 20% by MWP, the bond strength between concrete and reinforcing bar increased by 27% and 13%, respectively, compared to that of the control specimens. Also, the samples containing SF and MWP showed higher corrosion resistance and their bond strength’s loss due to the corrosion of reinforcing bars was less than the control samples. The results also indicate that bond stress at low corrosion (2%) levels is partially increased because of the friction resulting from the accumulation of corrosion products on reinforcement’s surface. However, for higher corrosion levels (5% and 10%), the bond strength decreases. By comparing the two diameters of reinforcing bars (12 and 16 mm), it was recognized that the reduction of bond strength due to the corrosion is more severe in the reinforcements with greater diameters.
- 1 March 2023
- Published by American Society of Civil Engineers (ASCE) in Journal of Materials in Civil Engineering
- Vol. 35 (3) , 04022460
Effect of Marble Waste Powder and Silica Fume on the Bond Behavior of Corroded Reinforcing Bar Embedded in Concrete
Bond behavior is the mutual effect and the force transmission between concrete and reinforcing bar that directly influence the behavior of reinforced concrete structures. Considering the silica fume (SF) and marble waste powder (MWP) could enhance the concrete matrix and improve its adherence, the bond-slip behavior of corroded reinforcing bar in concrete containing SF and MWP as ordinary portland cement (OPC) is examined in this work. Three of 16 concrete mixes were selected for this investigation: one control mix, a second mix containing 10% SF and 5% MWP as OPC replacements, and the third containing 10% SF and 20% MWP as OPC replacements. The pullout test was applied to the specimens with 0%, 2%, 5%, and 10% corroded reinforcement. According to the results of specimens with uncorroded reinforcement, replacing 10% of cement by SF and 5% or 20% by MWP, the bond strength between concrete and reinforcing bar increased by 27% and 13%, respectively, compared to that of the control specimens. Also, the samples containing SF and MWP showed higher corrosion resistance and their bond strength’s loss due to the corrosion of reinforcing bars was less than the control samples. The results also indicate that bond stress at low corrosion (2%) levels is partially increased because of the friction resulting from the accumulation of corrosion products on reinforcement’s surface. However, for higher corrosion levels (5% and 10%), the bond strength decreases. By comparing the two diameters of reinforcing bars (12 and 16 mm), it was recognized that the reduction of bond strength due to the corrosion is more severe in the reinforcements with greater diameters.
- 27 February 2023
- Published by Springer Nature in Journal of Building Pathology and Rehabilitation
- Vol. 8 (1) , 1-16
Recycled steel fiber for fiber reinforced concrete production: fresh and hardened properties, cost, and ecological assessments
- 27 February 2023
- Published by Springer Nature in Journal of Building Pathology and Rehabilitation
- Vol. 8 (1) , 1-16
Recycled steel fiber for fiber reinforced concrete production: fresh and hardened properties, cost, and ecological assessments