Rabiga Kassymbek
Research Subjects
Research Interests
Rabiga Kassymbek has a total of 27 co-authors. Here are the top co-authors by number of shared publications:
- Urishbay Chomanov
Kazakh Scientific Research Institute of Processing and Food Industry LLP
8 shared publications - Gulmira Kenenbay
Kazakh Scientific Research Institute of Processing and Food Industry LLP
4 shared publications - Gulzhan Zhumaliyeva
Kazakh Research Institute of Processing and Food Industry, Kazakhstan
4 shared publications - Mukhtar Tultabayev
Department of Kazakh University of Technology and Business of K.Kulazhanov, Astana, Republic of Kazakhstan
4 shared publications - Gulnara Sundetbayevna Aktokalova
Kazakh Research Institute of Processing and Food Industry, Kazakhstan
3 shared publications - Gulzhan Zhumaliyeva
LPP Kazakh Research Institute of Processing and Food Industry, Almaty 050010, Kazakhstan
3 shared publications
Latest Publications
- Open Access
- 15 April 2026
- Published by MDPI AG in Agriculture
- Vol. 16 (8) , 874
Effects of Wormwood-Supplemented Extruded Compound Feed on Milk Yield and Composition in Lactating Camels
This study evaluates the biological effectiveness of camel compound feeds produced using an optimized drying–grinding–extrusion technology and enriched with Artemisia lerchiana (wormwood). Building on a previously published process optimization study, the present work focuses on the effects of the developed feeds on milk productivity and quality in lactating camels. Eighteen lactating dromedary camels were randomly assigned to three dietary treatments (n = 6): a control diet without wormwood and experimental diets containing 10% and 15% wormwood (dry matter basis). The feeding trial lasted 45 days, including a 15-day adaptation period and a 30-day measurement period. Milk yield was recorded daily, and milk composition was analyzed weekly. Statistical analysis was performed using one-way and repeated-measures ANOVA (p < 0.05). Wormwood supplementation resulted in higher milk yield and significantly increased milk fat and protein content, with the strongest effects observed at the 15% inclusion level. No adverse effects on lactose content, physicochemical properties, or milk hygienic quality were detected. The results confirm that combining extrusion-based processing with phytogenic supplementation is an effective strategy for improving camel milk productivity.
- 15 April 2026
- Published by MDPI AG in Agriculture
- Vol. 16 (8) , 874
Open AccessEffects of Wormwood-Supplemented Extruded Compound Feed on Milk Yield and Composition in Lactating Camels
This study evaluates the biological effectiveness of camel compound feeds produced using an optimized drying–grinding–extrusion technology and enriched with Artemisia lerchiana (wormwood). Building on a previously published process optimization study, the present work focuses on the effects of the developed feeds on milk productivity and quality in lactating camels. Eighteen lactating dromedary camels were randomly assigned to three dietary treatments (n = 6): a control diet without wormwood and experimental diets containing 10% and 15% wormwood (dry matter basis). The feeding trial lasted 45 days, including a 15-day adaptation period and a 30-day measurement period. Milk yield was recorded daily, and milk composition was analyzed weekly. Statistical analysis was performed using one-way and repeated-measures ANOVA (p < 0.05). Wormwood supplementation resulted in higher milk yield and significantly increased milk fat and protein content, with the strongest effects observed at the 15% inclusion level. No adverse effects on lactose content, physicochemical properties, or milk hygienic quality were detected. The results confirm that combining extrusion-based processing with phytogenic supplementation is an effective strategy for improving camel milk productivity.
- Open Access
Development of Drying–Grinding–Extrusion Technology for Camel Compound Feeds Enriched with Wormwood
This study investigated the drying–grinding–extrusion processing of camel compound feeds enriched with locally available botanicals. A 2 × 2 × 3 full factorial design was applied to evaluate the effects of infrared drying temperature (two levels), grinding time (two levels), and extrusion screw speed (three levels) on process efficiency and product quality. Moisture calibration was performed using gravimetric reference values. Drying kinetics were modeled with Page and Midilli equations, while specific energy consumption (SEC) and specific moisture extraction rate (SMER) were calculated. Particle-size distribution, extrusion parameters, and extrudate properties (expansion ratio, bulk density, water absorption index (WAI), water solubility index (WSI), hardness, and color) were analyzed. Infrared drying resulted in faster moisture removal and greater energy efficiency compared with convective drying. The Midilli model provided the best fit to drying kinetics data. The results indicate that optimized combinations of drying, grinding, and extrusion conditions can enhance the technological and nutritional potential of camel compound feeds; however, biological validation is required. Limitations: These findings are limited to processing and compositional outcomes; biological validation in camels (in vivo or in vitro) remains necessary to confirm effects on digestibility, health, or performance.
Open AccessDevelopment of Drying–Grinding–Extrusion Technology for Camel Compound Feeds Enriched with Wormwood
This study investigated the drying–grinding–extrusion processing of camel compound feeds enriched with locally available botanicals. A 2 × 2 × 3 full factorial design was applied to evaluate the effects of infrared drying temperature (two levels), grinding time (two levels), and extrusion screw speed (three levels) on process efficiency and product quality. Moisture calibration was performed using gravimetric reference values. Drying kinetics were modeled with Page and Midilli equations, while specific energy consumption (SEC) and specific moisture extraction rate (SMER) were calculated. Particle-size distribution, extrusion parameters, and extrudate properties (expansion ratio, bulk density, water absorption index (WAI), water solubility index (WSI), hardness, and color) were analyzed. Infrared drying resulted in faster moisture removal and greater energy efficiency compared with convective drying. The Midilli model provided the best fit to drying kinetics data. The results indicate that optimized combinations of drying, grinding, and extrusion conditions can enhance the technological and nutritional potential of camel compound feeds; however, biological validation is required. Limitations: These findings are limited to processing and compositional outcomes; biological validation in camels (in vivo or in vitro) remains necessary to confirm effects on digestibility, health, or performance.
- Open Access
- 10 July 2024
- Published by Altai State Technical University in Ползуновский вестник
- No. 2,p. 164-174
РАЗРАБОТКА ТЕХНОЛОГИИ МУЧНЫХ КОНДИТЕРСКИХ ИЗДЕЛИЙ С ПРИМЕНЕНИЕМ ОТЕЧЕСТВЕННОЙ МУКИ ИЗ ЗЕРНА ТРИТИКАЛЕ
. В Республике Казахстан первостепенное внимание уделяется решению проблемы обеспечения зерном, определяющей независимость государства. В связи с этим в настоящее время в Республике принята программа максимального самообеспечения продовольствием за счет расширения производства, обеспечения сохранности и повышения качества собственного зернового сырья. Производство мучных кондитерских изделий в Казахстане ранее было ориентировано на использование в основном пшеничной муки. Исследования по разработке технологий мучных кондитерских изделий, пользующихся спросом у населения, с включением в рецептуру муки тритикалевой немногочисленны. В литературе отсутствуют данные о тритикалевой муке новых сортах и ее свойствах, отвечающих требованиям основных показателей мучных кондитерских изделий. В связи с этим, актуальной проблемой является разработка тритикалевой муки из зерна новых отечественных сортов тритикале и разработка технологий мучных кондитерских изделий улучшенного качества.
- 10 July 2024
- Published by Altai State Technical University in Ползуновский вестник
- No. 2,p. 164-174
Open AccessРАЗРАБОТКА ТЕХНОЛОГИИ МУЧНЫХ КОНДИТЕРСКИХ ИЗДЕЛИЙ С ПРИМЕНЕНИЕМ ОТЕЧЕСТВЕННОЙ МУКИ ИЗ ЗЕРНА ТРИТИКАЛЕ
. В Республике Казахстан первостепенное внимание уделяется решению проблемы обеспечения зерном, определяющей независимость государства. В связи с этим в настоящее время в Республике принята программа максимального самообеспечения продовольствием за счет расширения производства, обеспечения сохранности и повышения качества собственного зернового сырья. Производство мучных кондитерских изделий в Казахстане ранее было ориентировано на использование в основном пшеничной муки. Исследования по разработке технологий мучных кондитерских изделий, пользующихся спросом у населения, с включением в рецептуру муки тритикалевой немногочисленны. В литературе отсутствуют данные о тритикалевой муке новых сортах и ее свойствах, отвечающих требованиям основных показателей мучных кондитерских изделий. В связи с этим, актуальной проблемой является разработка тритикалевой муки из зерна новых отечественных сортов тритикале и разработка технологий мучных кондитерских изделий улучшенного качества.
- Open Access
- 8 May 2024
- Published by Bentham Science Publishers Ltd. in The Open Chemical Engineering Journal
- Vol. 18 (1)
Regulation of Fat Content in Triticale Based on Optimization of Technological Processing Modes
Introduction: The aim of the study was to regulate the fat content based on the optimization of technological processing modes. A promising method of preparing grain for animal feeding is its preliminary germination. Sprouted grain is a dietary food product, as it increases the content of proteins, essential amino acids, and macro- and microelements in comparison with non-sprouted grain. Methods: The purpose of this study was to regulate the fat content based on the optimization of technological processing modes. Regression equations describing the dependences of the quality indicators of the triticale grain germination modes on the factors tw, τ, w and tg affecting them were investigated and obtained. During the study of triticale grains, it was found that the most significant parameter affecting the germination process is the fat content. The optimization of the germination modes of triticale Leather grain was carried out by the method of nonlinear programming. Results: During the study, it was found that the maximum fat content during germination of triticale grain was observed with the following technological parameters of germination: grain temperature = 30°C; germination time = 24 h; grain moisture = 13%; and grain temperature = 26°C. When controlling the fat content in triticale based on the optimization of technological modes, the target function was 2.83%. Conclusion: The presented results and conclusion will allow to regulate the fat content in triticale grain during germination.
- 8 May 2024
- Published by Bentham Science Publishers Ltd. in The Open Chemical Engineering Journal
- Vol. 18 (1)
Open AccessRegulation of Fat Content in Triticale Based on Optimization of Technological Processing Modes
Introduction: The aim of the study was to regulate the fat content based on the optimization of technological processing modes. A promising method of preparing grain for animal feeding is its preliminary germination. Sprouted grain is a dietary food product, as it increases the content of proteins, essential amino acids, and macro- and microelements in comparison with non-sprouted grain. Methods: The purpose of this study was to regulate the fat content based on the optimization of technological processing modes. Regression equations describing the dependences of the quality indicators of the triticale grain germination modes on the factors tw, τ, w and tg affecting them were investigated and obtained. During the study of triticale grains, it was found that the most significant parameter affecting the germination process is the fat content. The optimization of the germination modes of triticale Leather grain was carried out by the method of nonlinear programming. Results: During the study, it was found that the maximum fat content during germination of triticale grain was observed with the following technological parameters of germination: grain temperature = 30°C; germination time = 24 h; grain moisture = 13%; and grain temperature = 26°C. When controlling the fat content in triticale based on the optimization of technological modes, the target function was 2.83%. Conclusion: The presented results and conclusion will allow to regulate the fat content in triticale grain during germination.
- Open Access
- 31 October 2023
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 5 (11 (125)) , 57-66
Establishing the regularities of blending functional purpose juices based on watermelon juice
The objects of the research are fruit and berry juices from watermelon, rosehip, apples and pumpkin. The influence of the physico-chemical parameters of fruit and berry juices on the process of storage and blending is investigated. It has been found that quantitative regulation depending on the physico-chemical parameters of fruit and berry juices during the development of blended juice technology makes it possible to develop a drink with a long shelf life. The developed juices should satisfy the body's needs for vitamins and minerals in food necessary for the normal development of the body. Based on research, watermelon-pumpkin-rosehip juice is recommended. However, the consumer properties of natural juices depend on the variety and climatic conditions of growth. The climatic conditions of growth and the variety significantly affect the physico-chemical parameters of the juices obtained from them. All this allows us to assert that it is advisable to conduct a study devoted to establishing the influence of the physico-chemical parameters of fruit and berry juices based on watermelon juice on the process of storage and blending. Juices are the most technologically advanced product for creating new types of functional nutrition. In addition, they contain a complex of vitamins and minerals in their composition. In connection with the above, the development of technology and the organization of the production of functional purpose juices are the solution to problems related to nutrition. It is found that the resulting new product – watermelon-pumpkin-rosehip drink will allow you to get a new product with high quality indicators and expand the range of fruit and berry drinks based on watermelon juice
- 31 October 2023
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 5 (11 (125)) , 57-66
Open AccessEstablishing the regularities of blending functional purpose juices based on watermelon juice
The objects of the research are fruit and berry juices from watermelon, rosehip, apples and pumpkin. The influence of the physico-chemical parameters of fruit and berry juices on the process of storage and blending is investigated. It has been found that quantitative regulation depending on the physico-chemical parameters of fruit and berry juices during the development of blended juice technology makes it possible to develop a drink with a long shelf life. The developed juices should satisfy the body's needs for vitamins and minerals in food necessary for the normal development of the body. Based on research, watermelon-pumpkin-rosehip juice is recommended. However, the consumer properties of natural juices depend on the variety and climatic conditions of growth. The climatic conditions of growth and the variety significantly affect the physico-chemical parameters of the juices obtained from them. All this allows us to assert that it is advisable to conduct a study devoted to establishing the influence of the physico-chemical parameters of fruit and berry juices based on watermelon juice on the process of storage and blending. Juices are the most technologically advanced product for creating new types of functional nutrition. In addition, they contain a complex of vitamins and minerals in their composition. In connection with the above, the development of technology and the organization of the production of functional purpose juices are the solution to problems related to nutrition. It is found that the resulting new product – watermelon-pumpkin-rosehip drink will allow you to get a new product with high quality indicators and expand the range of fruit and berry drinks based on watermelon juice
- Open Access
- 14 September 2023
- Published by Almaty Technological University JSC in The Journal of Almaty Technological University
- Vol. 1 (3) , 70-77
Studing of the composition of plant raw materials for the development of a recipe for a new type of feed
The article examines the chemical composition of some types of grain crops – wheat, bran, barley to identify the most nutritious of them, mixed with a feed additive to obtain highly nutritious feed for cattle. According to laboratory studies, the selected raw materials exceed the most common types of feed in terms of mineral content. Bran has the best indicators of vitamin and mineral composition, but the content of fiber and ash in them is higher than in wheat and barley, which can negatively affect the digestibility of ruminants. Wheat has the lowest indicators in terms of the content of the mass fraction of fiber and ash: fiber – 10.44%, ash – 1.57%. The content of the mass fraction of fat in the studied raw materials is in the range of 2.13-3.62%. Consequently, 3.5-4% of animals or a mixture of animal and vegetable fats protected from decay in the rumen can be added to the cow's diet. Comparing the data obtained with the minimum requirements for fodder crops and feed quality in the production of milk and beef, the compliance of the actual results with the requirements of regulatory documents was revealed. Based on the data obtained, it is concluded that it is possible to use this raw material as the main raw material for the development of compound feed with increased nutritional value.
- 14 September 2023
- Published by Almaty Technological University JSC in The Journal of Almaty Technological University
- Vol. 1 (3) , 70-77
Open AccessStuding of the composition of plant raw materials for the development of a recipe for a new type of feed
The article examines the chemical composition of some types of grain crops – wheat, bran, barley to identify the most nutritious of them, mixed with a feed additive to obtain highly nutritious feed for cattle. According to laboratory studies, the selected raw materials exceed the most common types of feed in terms of mineral content. Bran has the best indicators of vitamin and mineral composition, but the content of fiber and ash in them is higher than in wheat and barley, which can negatively affect the digestibility of ruminants. Wheat has the lowest indicators in terms of the content of the mass fraction of fiber and ash: fiber – 10.44%, ash – 1.57%. The content of the mass fraction of fat in the studied raw materials is in the range of 2.13-3.62%. Consequently, 3.5-4% of animals or a mixture of animal and vegetable fats protected from decay in the rumen can be added to the cow's diet. Comparing the data obtained with the minimum requirements for fodder crops and feed quality in the production of milk and beef, the compliance of the actual results with the requirements of regulatory documents was revealed. Based on the data obtained, it is concluded that it is possible to use this raw material as the main raw material for the development of compound feed with increased nutritional value.
- Open Access
- 31 August 2023
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 4 (11 (124)) , 59-64
Technology improvement obtaining powdered dried honey
The object of the study is the production of powdered dried honey. The limited use of honey in the food industry is due to its physicochemical properties. Viscosity and stickiness create problems during its dosing, mixing, storage and transportation. Honey in powder form has a high commercial potential. The great advantages of using dry honey are the reduction of storage space, ease of processing and dosing. Honey is characterized by organoleptic and physico-chemical parameters affecting the drying process and the quality of the final product. The resulting powdered dry honey, in compliance with the drying modes recommended by us, has retained all its useful biological properties. The water content, as well as the dry matter content in fresh and dried honey met the criteria for the composition of honey. Consequently, reducing the water content during the drying process significantly contributes to increasing the stability of honey during storage. The developed technology provides for reducing the drying temperature to 50 °C, which also has a positive effect on the nutritional value of the final product It is established that the maximum proportion of frozen moisture in the sublimation process is observed at temperatures from minus 30 °C to minus 40 °C, depending on the types of honey, and an increase in the drying temperature above 40 °C shortens the duration of the drying process, but may affect the quality of the product. Powdered honey is in demand in the food, pharmaceutical and cosmetic industries, due to increased dosing accuracy due to the flowability of dried honey. However, it should be borne in mind that dried honey is very hygroscopic due to the presence of sugars and the amorphous state after drying
- 31 August 2023
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 4 (11 (124)) , 59-64
Open AccessTechnology improvement obtaining powdered dried honey
The object of the study is the production of powdered dried honey. The limited use of honey in the food industry is due to its physicochemical properties. Viscosity and stickiness create problems during its dosing, mixing, storage and transportation. Honey in powder form has a high commercial potential. The great advantages of using dry honey are the reduction of storage space, ease of processing and dosing. Honey is characterized by organoleptic and physico-chemical parameters affecting the drying process and the quality of the final product. The resulting powdered dry honey, in compliance with the drying modes recommended by us, has retained all its useful biological properties. The water content, as well as the dry matter content in fresh and dried honey met the criteria for the composition of honey. Consequently, reducing the water content during the drying process significantly contributes to increasing the stability of honey during storage. The developed technology provides for reducing the drying temperature to 50 °C, which also has a positive effect on the nutritional value of the final product It is established that the maximum proportion of frozen moisture in the sublimation process is observed at temperatures from minus 30 °C to minus 40 °C, depending on the types of honey, and an increase in the drying temperature above 40 °C shortens the duration of the drying process, but may affect the quality of the product. Powdered honey is in demand in the food, pharmaceutical and cosmetic industries, due to increased dosing accuracy due to the flowability of dried honey. However, it should be borne in mind that dried honey is very hygroscopic due to the presence of sugars and the amorphous state after drying
- Open Access
- 13 July 2023
- Published by HACCP Consulting in Potravinarstvo Slovak Journal of Food Sciences
- Vol. 17, 581-593
Transforming livestock by-products into nutritious extruded feed additives: a sustainable approach for modern agriculture
The search for a solution to the challenge of providing the agriculture industry with complete feeds is relevant to modern animal husbandry in many countries, and protein is a key limiting component in feed. Along with the growth of food production, the waste it produces, which is also a valuable resource of useful components, can be recycled and used. Thus, in slaughter, butchering and meat production, a large amount of waste is generated, including by-products that can be processed further. The extrusion process is one of the best processing methods to improve the nutritional value of ingredients and feed and improve feed efficiency. In modern feed milling operations, extrusion must be considered as the main process for increasing feed profitability. The benefits of the extrusion process in improving the nutritional value and efficiency of ingredients and feeds depend on many factors, such as the structure and chemical composition of the ingredients, the processing conditions and the equipment used in processing. This article substantiates the need to develop technologies for involving production waste in their further use in medium- and long-term growth in the demand for food. A technology for producing an extruded feed additive based on vegetable feed with the addition of slaughter waste is presented. The formulation of a feed additive in which different percentages of slaughter waste of 5.10% and 15% corn was replaced with by-products was studied. The water activity of the obtained extruded feed additives was studied, where, at a content of 15% slaughter waste, it was low compared with that of the other two samples. Further research will allow procuring fodder products with a high biological value and utilising unclaimed by-products of livestock slaughter.
- 13 July 2023
- Published by HACCP Consulting in Potravinarstvo Slovak Journal of Food Sciences
- Vol. 17, 581-593
Open AccessTransforming livestock by-products into nutritious extruded feed additives: a sustainable approach for modern agriculture
The search for a solution to the challenge of providing the agriculture industry with complete feeds is relevant to modern animal husbandry in many countries, and protein is a key limiting component in feed. Along with the growth of food production, the waste it produces, which is also a valuable resource of useful components, can be recycled and used. Thus, in slaughter, butchering and meat production, a large amount of waste is generated, including by-products that can be processed further. The extrusion process is one of the best processing methods to improve the nutritional value of ingredients and feed and improve feed efficiency. In modern feed milling operations, extrusion must be considered as the main process for increasing feed profitability. The benefits of the extrusion process in improving the nutritional value and efficiency of ingredients and feeds depend on many factors, such as the structure and chemical composition of the ingredients, the processing conditions and the equipment used in processing. This article substantiates the need to develop technologies for involving production waste in their further use in medium- and long-term growth in the demand for food. A technology for producing an extruded feed additive based on vegetable feed with the addition of slaughter waste is presented. The formulation of a feed additive in which different percentages of slaughter waste of 5.10% and 15% corn was replaced with by-products was studied. The water activity of the obtained extruded feed additives was studied, where, at a content of 15% slaughter waste, it was low compared with that of the other two samples. Further research will allow procuring fodder products with a high biological value and utilising unclaimed by-products of livestock slaughter.
- Open Access
- 1 July 2023
- Published by Almaty Technological University JSC in The Journal of Almaty Technological University
- No. 2,p. 115-123
The feed value and amino acid composition of sprouted triticale grains
The research is devoted to the feed value and amino acid composition of sprouted triticale grain. The purpose of the study is to study the feed value of sprouted triticale grain. The article presents the results of a study of 3 domestic varieties of sprouted triticale grains for use in the feed industry. The physicochemical parameters, as well as the mass fraction of carbohydrates, the content of vitamins, mineral elements and the amino acid composition of sprouted triticale grains were studied. The data obtained indicate that the use of sprouted triticale grains is a source of easily digestible carbohydrates, amino acids, fatty acids, vitamins and enzymes. According to the content of crude protein, the leading grade of Taza was 15.83%, according to the content of crude fiber, the grade of Kozhar was 13.77%. The content of the mineral elements potassium and phosphorus is highest in the Asiada variety potassium- 422.18% and phosphorus-340.07%. The use of sprouted grain in the feed industry to increase the digestibility and digestibility of animal feed. The practical significance of the technology for the production of compound feeds using sprouted triticale grain in order to improve quality and increase shelf life.
- 1 July 2023
- Published by Almaty Technological University JSC in The Journal of Almaty Technological University
- No. 2,p. 115-123
Open AccessThe feed value and amino acid composition of sprouted triticale grains
The research is devoted to the feed value and amino acid composition of sprouted triticale grain. The purpose of the study is to study the feed value of sprouted triticale grain. The article presents the results of a study of 3 domestic varieties of sprouted triticale grains for use in the feed industry. The physicochemical parameters, as well as the mass fraction of carbohydrates, the content of vitamins, mineral elements and the amino acid composition of sprouted triticale grains were studied. The data obtained indicate that the use of sprouted triticale grains is a source of easily digestible carbohydrates, amino acids, fatty acids, vitamins and enzymes. According to the content of crude protein, the leading grade of Taza was 15.83%, according to the content of crude fiber, the grade of Kozhar was 13.77%. The content of the mineral elements potassium and phosphorus is highest in the Asiada variety potassium- 422.18% and phosphorus-340.07%. The use of sprouted grain in the feed industry to increase the digestibility and digestibility of animal feed. The practical significance of the technology for the production of compound feeds using sprouted triticale grain in order to improve quality and increase shelf life.
- Open Access
- 30 June 2023
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 3 (11 (123)) , 16-23
Development of a highly efficient plant for separating the peel from the pulp of melons
- 30 June 2023
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 3 (11 (123)) , 16-23
Open AccessDevelopment of a highly efficient plant for separating the peel from the pulp of melons