Shuowen Zhang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Shuowen Zhang has a total of 8 co-authors. Here are the top co-authors by number of shared publications:
- Bowen Guan
School of Materials Science and Engineering, Chang’an University, Xi’an, People’s Republic of China
2 shared publications - Faping Wang
Qinghai Transportation Holding Group Co., Ltd., Xining 817101, China
1 shared publication - Jiayu Wu
School of Civil and Transportation Engineering, Ningbo University of Technology, Ningbo, China
1 shared publication - Laifa Wang
Qinghai Provincial Traffic Control Construction Engineering Group Co., Ltd., Xining 810001, China
1 shared publication - Lingyun Li
Qinghai Traffic Investment Co., Ltd., Xining 810021, China
1 shared publication - Renwei Yan
Qinghai Guoluo Highway Engineering Construction Co., Ltd., Xining 810021, China
1 shared publication
Latest Publications
- Open Access
A Study on the Properties of Composite Modified Mortar with Styrene–Butadiene Rubber Latex and Silica Fume
To solve the problem of the poor abrasion resistance of concrete pavement surface mortar, this study substituted cement with equal amounts of styrene–butadiene rubber (SBR) latex and silica fume (SF) to investigate the effects of organic/inorganic material composite modification on the fluidity, drying shrinkage, mechanical properties, and abrasion resistance of cement mortar. Also in this study, the microstructure, product, and pore structure characteristics of the composite modified cement mortar were investigated using scanning electron microscope (SEM), X-Ray diffraction (XRD), Fourier-transform infrared spectroscopy (FT-IR), and the Brunauer–Emmett–Teller (BET) method. This research found that the sole substitution of SF negatively impacted the mortar’s fluidity and drying shrinkage yet enhanced its mechanical strength and abrasion resistance; the incorporation of SBR latex improved fluidity, reduced shrinkage, and increased flexural strength but adversely affected the compressive strength of the mortar. Additionally, the enhancement of the mortar’s abrasion resistance with SBR latex was significantly greater than that with SF. When SBR latex and SF were used together as substitutes, the latex struggled to offset the negative impact of SF on mortar fluidity but effectively reduced shrinkage; SF compensated for the detrimental effect of the latex on compressive strength. Moreover, the primary role in enhancing the mortar’s abrasion resistance was played by the latex. Microscopic tests showed that SBR latex and SF could increase the content of calcium silicate hydrate (C-S-H) gel, inhibit the formation of ettringite (AFt) and reduce carbonation, refine the pore size of cement mortar, and effectively improve the microstructure of mortar.
Open AccessA Study on the Properties of Composite Modified Mortar with Styrene–Butadiene Rubber Latex and Silica Fume
To solve the problem of the poor abrasion resistance of concrete pavement surface mortar, this study substituted cement with equal amounts of styrene–butadiene rubber (SBR) latex and silica fume (SF) to investigate the effects of organic/inorganic material composite modification on the fluidity, drying shrinkage, mechanical properties, and abrasion resistance of cement mortar. Also in this study, the microstructure, product, and pore structure characteristics of the composite modified cement mortar were investigated using scanning electron microscope (SEM), X-Ray diffraction (XRD), Fourier-transform infrared spectroscopy (FT-IR), and the Brunauer–Emmett–Teller (BET) method. This research found that the sole substitution of SF negatively impacted the mortar’s fluidity and drying shrinkage yet enhanced its mechanical strength and abrasion resistance; the incorporation of SBR latex improved fluidity, reduced shrinkage, and increased flexural strength but adversely affected the compressive strength of the mortar. Additionally, the enhancement of the mortar’s abrasion resistance with SBR latex was significantly greater than that with SF. When SBR latex and SF were used together as substitutes, the latex struggled to offset the negative impact of SF on mortar fluidity but effectively reduced shrinkage; SF compensated for the detrimental effect of the latex on compressive strength. Moreover, the primary role in enhancing the mortar’s abrasion resistance was played by the latex. Microscopic tests showed that SBR latex and SF could increase the content of calcium silicate hydrate (C-S-H) gel, inhibit the formation of ettringite (AFt) and reduce carbonation, refine the pore size of cement mortar, and effectively improve the microstructure of mortar.
- Open Access
Numerical Simulation of Concrete Attacked by Sulfate under Drying–Wetting Cycles Coupled with Alternating Loads
Concrete structures such as rigid pavements, tunnels, and runways at airports are usually subject to fatigue traffic loading during their service life. Research on the aftereffects of drying–wetting cycles coupled with alternating loads on concrete erosion in saline–alkali and coastal areas is of considerable practical importance. For this study, we utilized specimens of dimensions 100 mm × 100 mm × 400 mm with strength ratios of C30, C40, and C50. We incubated the concrete samples in a 24 h/24 h drying–wetting cycle with sodium sulfate solutions of different concentrations as we applied alternating loads. We conducted ultrasonic wave velocity tests every 30 days from the 60th day of the experiment to determine the change in the sound velocity of the concrete over the course of 360 days. In addition, we examined the invasion depth of SO42− with time. Based on the change in sound velocity, we developed the damage degree function, and we modified the diffusion coefficient of SO42− in concrete in accordance with the coupling of drying–wetting cycles and alternating loads. We conducted a simulation on SO42− penetration depth, and the results were in reasonable agreement with those obtained by experimental testing.
Open AccessNumerical Simulation of Concrete Attacked by Sulfate under Drying–Wetting Cycles Coupled with Alternating Loads
Concrete structures such as rigid pavements, tunnels, and runways at airports are usually subject to fatigue traffic loading during their service life. Research on the aftereffects of drying–wetting cycles coupled with alternating loads on concrete erosion in saline–alkali and coastal areas is of considerable practical importance. For this study, we utilized specimens of dimensions 100 mm × 100 mm × 400 mm with strength ratios of C30, C40, and C50. We incubated the concrete samples in a 24 h/24 h drying–wetting cycle with sodium sulfate solutions of different concentrations as we applied alternating loads. We conducted ultrasonic wave velocity tests every 30 days from the 60th day of the experiment to determine the change in the sound velocity of the concrete over the course of 360 days. In addition, we examined the invasion depth of SO42− with time. Based on the change in sound velocity, we developed the damage degree function, and we modified the diffusion coefficient of SO42− in concrete in accordance with the coupling of drying–wetting cycles and alternating loads. We conducted a simulation on SO42− penetration depth, and the results were in reasonable agreement with those obtained by experimental testing.