Jingyang Zhou
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Jingyang Zhou has a total of 39 co-authors. Here are the top co-authors by number of shared publications:
Zhishen Wu
8 shared publications- Xin Wang
Key Laboratory of C & PC Structures Ministry of Education, National and Local Unified Engineering Research Center for Basalt Fiber Production and Application Technology Southeast University Nanjing China
6 shared publications Jiazhan Xie
Key Laboratory of C & PC Structures Ministry of Education, National and Local Unified Engineering Research Center for Basalt Fiber Production and Application Technology Southeast University Nanjing China
3 shared publications- Xia Liu
Key Laboratory of C & PC Structures Ministry of Education, National and Local Unified Engineering Research Center for Basalt Fiber Production and Application Technology Southeast University Nanjing China
3 shared publications Xin Wang
3 shared publications- Chang Su
School of Civil Engineering Zhengzhou University Zhengzhou China
2 shared publications
Latest Publications
- 23 October 2026
- Published by Elsevier in Construction and Building Materials
- Vol. 547
Microcapsule-matrix compatibility in self-healing geopolymer mortar under high-alkali conditions
- 23 October 2026
- Published by Elsevier in Construction and Building Materials
- Vol. 547
Microcapsule-matrix compatibility in self-healing geopolymer mortar under high-alkali conditions
- 5 October 2026
- Published by Wiley in Polymer Composites
Prediction and Model Validation of Corrosion Fatigue Life for BFRP Tendons Under Combined Acidic Environment and Temperature
The widespread application of fiber‐reinforced polymers (FRP) in engineering is primarily attributed to their superior durability compared to traditional materials. However, under prolonged exposure to harsh service environments, the material inevitably undergoes progressive degradation. The existing durability studies and life prediction models have largely overlooked the synergistic effects of combined environmental actions and mechanical loading conditions. To address this gap, this paper investigates the corrosion fatigue behavior of BFRP tendons under combined cyclic loading, acidic environments (pH = 1.5, 2.5, and 7.0), and temperatures (25°C–50°C). An experimental matrix was designed to couple these variables, enabling the identification of fatigue failure modes and the development of S – N models for each environmental condition. A sequential multifactor life prediction model was developed and validated through a case study. Results reveal that ignoring the combined effect of temperature and acidity leads to an 83.0% overestimation of service life, underscoring the necessity of considering multifactor synergy for realistic durability design.
- 5 October 2026
- Published by Wiley in Polymer Composites
Prediction and Model Validation of Corrosion Fatigue Life for BFRP Tendons Under Combined Acidic Environment and Temperature
The widespread application of fiber‐reinforced polymers (FRP) in engineering is primarily attributed to their superior durability compared to traditional materials. However, under prolonged exposure to harsh service environments, the material inevitably undergoes progressive degradation. The existing durability studies and life prediction models have largely overlooked the synergistic effects of combined environmental actions and mechanical loading conditions. To address this gap, this paper investigates the corrosion fatigue behavior of BFRP tendons under combined cyclic loading, acidic environments (pH = 1.5, 2.5, and 7.0), and temperatures (25°C–50°C). An experimental matrix was designed to couple these variables, enabling the identification of fatigue failure modes and the development of S – N models for each environmental condition. A sequential multifactor life prediction model was developed and validated through a case study. Results reveal that ignoring the combined effect of temperature and acidity leads to an 83.0% overestimation of service life, underscoring the necessity of considering multifactor synergy for realistic durability design.
- 22 September 2026
- Published by Elsevier in Construction and Building Materials
- Vol. 544
Marine durability of glass fiber-reinforced polypropylene (GFRPP) prepreg tapes for reinforcing bars applications
- 22 September 2026
- Published by Elsevier in Construction and Building Materials
- Vol. 544
Marine durability of glass fiber-reinforced polypropylene (GFRPP) prepreg tapes for reinforcing bars applications
- 19 May 2026
- Published by Elsevier in Tunnelling and Underground Space Technology
- Vol. 175
Experimental and numerical study on tunnel linings strengthened with corrugated BFRP plates
- 19 May 2026
- Published by Elsevier in Tunnelling and Underground Space Technology
- Vol. 175
Experimental and numerical study on tunnel linings strengthened with corrugated BFRP plates
- Open Access
- 7 March 2026
- Published by Elsevier in SSRN Electronic Journal
Long-term transverse shear behavior evaluation and prediction of glass fiber-reinforced polypropylene bars in marine environments
Transverse shear performance is the weakness of glass fiber-reinforced polypropylene (GFRPP) bars, and its long-term stability in marine environments is crucial to the safety and life of marine structures. This study systematically investigated the transverse shear behavior of GFRPP bars after exposure to distilled water (DW), seawater (SW), and an alkaline seawater sea-sand concrete pore solution (AS) at different temperatures (25, 40, 60°C) and durations (4, 8, 12 weeks), and conducts analysis of degradation mechanisms and service life prediction. The results indicate that the transverse shear strength (TSS) retention decreases with increasing temperature and exposure time, with the most significant degradation observed in AS. Elevated temperature has a threshold effect on accelerating degradation, as the rate increases sharply when exceeding 40 °C. A modified TSS retention prediction model with higher accuracy (R2>0.96) is proposed. The predicted service life was (TSS retention drops to 30%) 3154d, 1886d, 1413d in SW and 578d, 423d, 354d in AS at 5.7°C, 14°C, 23°C respectively. This study presents long-term transverse shear data and a service life prediction model for GFRPP bars, thereby providing data and theoretical support for their application in marine engineering.
- 7 March 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessLong-term transverse shear behavior evaluation and prediction of glass fiber-reinforced polypropylene bars in marine environments
Transverse shear performance is the weakness of glass fiber-reinforced polypropylene (GFRPP) bars, and its long-term stability in marine environments is crucial to the safety and life of marine structures. This study systematically investigated the transverse shear behavior of GFRPP bars after exposure to distilled water (DW), seawater (SW), and an alkaline seawater sea-sand concrete pore solution (AS) at different temperatures (25, 40, 60°C) and durations (4, 8, 12 weeks), and conducts analysis of degradation mechanisms and service life prediction. The results indicate that the transverse shear strength (TSS) retention decreases with increasing temperature and exposure time, with the most significant degradation observed in AS. Elevated temperature has a threshold effect on accelerating degradation, as the rate increases sharply when exceeding 40 °C. A modified TSS retention prediction model with higher accuracy (R2>0.96) is proposed. The predicted service life was (TSS retention drops to 30%) 3154d, 1886d, 1413d in SW and 578d, 423d, 354d in AS at 5.7°C, 14°C, 23°C respectively. This study presents long-term transverse shear data and a service life prediction model for GFRPP bars, thereby providing data and theoretical support for their application in marine engineering.
- 7 September 2024
- Published by Elsevier in Construction and Building Materials
- Vol. 448
Evaluation of the long-term performance and durability of basalt fiber reinforced polymer bars in concrete structures
- 7 September 2024
- Published by Elsevier in Construction and Building Materials
- Vol. 448
Evaluation of the long-term performance and durability of basalt fiber reinforced polymer bars in concrete structures
- 4 October 2023
- Published by Elsevier in Engineering Structures
- Vol. 297
Experimental investigation on the fatigue performance of multi-tendon basalt fiber reinforced polymer cable
- 4 October 2023
- Published by Elsevier in Engineering Structures
- Vol. 297
Experimental investigation on the fatigue performance of multi-tendon basalt fiber reinforced polymer cable
- Open Access
Numerical and Experimental Study on Large-Diameter FRP Cable Anchoring System with Dispersed Tendons
Based on a previously designed variable-stiffness load transfer component (LTC), a novel dispersed-tendon cable anchor system (CAS) was developed to increase the anchoring efficiency of large-diameter basalt-fiber-reinforced polymer (BFRP) cables. The static behaviors of the CAS are then numerically evaluated by a simplified three-dimensional finite-element (FE) model and implemented in a full-scale BFRP cable. The FE results indicated that the accuracy of the simplified dispersed-tendon model could be effectively ensured by dividing the revised compensation factor. The anchor behavior of the dispersed-tendon CAS was superior to that of the parallel-tendon CAS when the same cable was applied. The radial stress and tensile stress difference can be reduced by decreasing the tendon spacing. The testing and simulated results agreed well with the load–displacement relationship and axial displacement. All tendons fractured in the testing section, and the LTC suffered minimal damage. The ultimate force of the cable with 127 4-mm-diameter tendons was 2419 kN, and the corresponding anchoring efficiency was 93%. The cable axial tensile strain in the anchoring zone decreased linearly from the loading end to the free end. The cable shear stress concentration at the loading end can be avoided by employing a variable-stiffness anchoring method.
Open AccessNumerical and Experimental Study on Large-Diameter FRP Cable Anchoring System with Dispersed Tendons
Based on a previously designed variable-stiffness load transfer component (LTC), a novel dispersed-tendon cable anchor system (CAS) was developed to increase the anchoring efficiency of large-diameter basalt-fiber-reinforced polymer (BFRP) cables. The static behaviors of the CAS are then numerically evaluated by a simplified three-dimensional finite-element (FE) model and implemented in a full-scale BFRP cable. The FE results indicated that the accuracy of the simplified dispersed-tendon model could be effectively ensured by dividing the revised compensation factor. The anchor behavior of the dispersed-tendon CAS was superior to that of the parallel-tendon CAS when the same cable was applied. The radial stress and tensile stress difference can be reduced by decreasing the tendon spacing. The testing and simulated results agreed well with the load–displacement relationship and axial displacement. All tendons fractured in the testing section, and the LTC suffered minimal damage. The ultimate force of the cable with 127 4-mm-diameter tendons was 2419 kN, and the corresponding anchoring efficiency was 93%. The cable axial tensile strain in the anchoring zone decreased linearly from the loading end to the free end. The cable shear stress concentration at the loading end can be avoided by employing a variable-stiffness anchoring method.