Xiaoli Qin
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Xiaoli Qin has a total of 18 co-authors. Here are the top co-authors by number of shared publications:
- Hui Li
College of Environmental Science and Engineering, Hunan University, Changsha, 410082, PR China; Key Laboratory of Environmental Biology and Pollution Control (Hunan University), Ministry of Education, Changsha, 410082, PR China; State Key Laboratory of Utilization of Woody Oil Resource, Hunan Academy of Forestry, Changsha, 410004, PR China
2 shared publications - Jing Huang
Hunan Academy of Forestry, Changsha 410018, China
2 shared publications - Zhongliang Huang
State Key Laboratory of Utilization of Woody Oil Resource, Hunan Academy of Forestry, Changsha 410004, China
2 shared publications - Zijian Wu
State Key Laboratory of Utilization of Woody Oil Resource, Hunan Academy of Forestry, Changsha 410004, China
2 shared publications - Hongli Chen
College of Mechanical and Electrical Engineering, Central South University of Forestry and Technology, Changsha 410004, China
1 shared publication - Hui Li
State Key Laboratory of Utilization of Woody Oil Resource, Hunan Academy of Forestry, Changsha 410004, China
1 shared publication
Latest Publications
- Open Access
Sediment Fungal Communities of Constructed Wetlands Dominated by Zizania latifolia and Phragmites communis and Their Effect on Organic Pollutant Removal
The purpose of the study was to investigate the relationship between wetland plants and fungal communities with a focus on their combined functions to remove organic pollutants. Two constructed wetland (CW) systems, covering a total area of 4.24 hm2, were established to treat the agricultural non-point source pollution using, respectively, Zizania latifolia (CW1) and Phragmites communis (CW2) as the dominant plant species. The obtained results showed that CW1 performed much better than CW2 in terms of promoting the abundance and diversity of the sediment fungal community identified by high-throughput sequencing technology. The enhanced fungal activity was shown to be one of the main factors that raised the pollutant removal rates and reduced the contents of the target pollutants (COD, TN, TP and NH4+-N) to levels below the stipulated national standards. Significant differences in abundant fungi were observed between the CW units and their inlet and outlet sampling sites, indicating that the plant species and pollutant concentrations were the key factors affecting the diversity and activity of the sediment fungal community. The findings of the study provided not only a better understanding of the plant–fungi symbiotic system but also useful information for the development of CW technology.
Open AccessSediment Fungal Communities of Constructed Wetlands Dominated by Zizania latifolia and Phragmites communis and Their Effect on Organic Pollutant Removal
The purpose of the study was to investigate the relationship between wetland plants and fungal communities with a focus on their combined functions to remove organic pollutants. Two constructed wetland (CW) systems, covering a total area of 4.24 hm2, were established to treat the agricultural non-point source pollution using, respectively, Zizania latifolia (CW1) and Phragmites communis (CW2) as the dominant plant species. The obtained results showed that CW1 performed much better than CW2 in terms of promoting the abundance and diversity of the sediment fungal community identified by high-throughput sequencing technology. The enhanced fungal activity was shown to be one of the main factors that raised the pollutant removal rates and reduced the contents of the target pollutants (COD, TN, TP and NH4+-N) to levels below the stipulated national standards. Significant differences in abundant fungi were observed between the CW units and their inlet and outlet sampling sites, indicating that the plant species and pollutant concentrations were the key factors affecting the diversity and activity of the sediment fungal community. The findings of the study provided not only a better understanding of the plant–fungi symbiotic system but also useful information for the development of CW technology.
- Open Access
- 28 February 2023
- Published by MDPI AG in International Journal of Environmental Research and Public Health
- Vol. 20 (5) , 4278
Effects of Magnetic Biochar Addition on Mesophilic Anaerobic Digestion of Sewage Sludge
As a low-cost additive to anaerobic digestion (AD), magnetic biochar (MBC) can act as an electron conductor to promote electron transfer to enhance biogas production performance in the AD process of sewage sludge and has thus attracted much attention in research and industrial applications. In the present work, Camellia oleifera shell (COS) was used to produce MBC as an additive for mesophilic AD of sewage sludge, in order to explore the effect of MBC on the mesophilic AD process and its enhancement mechanism. Analysis by scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS), Fourier-transform infrared spectrometry (FTIR), and X-ray diffraction (XRD) further confirmed that biochar was successfully magnetized. The yield of biogas from sewage sludge was enhanced by 14.68–39.24% with the addition of MBC, and the removal efficiency of total solid (TS), volatile solids (VS), and soluble chemical oxygen demand (sCOD) were 28.99–46.13%, 32.22–48.62%, and 84.18–86.71%, respectively. According to the Modified Gompertz Model and Cone Model, the optimum dosage of MBC was 20 mg/g TS. The maximum methane production rate (Rm) was 15.58% higher than that of the control reactor, while the lag-phase (λ) was 43.78% shorter than the control group. The concentration of soluble Fe2+ and Fe3+ were also detected in this study to analyze the function of MBC for improving biogas production performance from sewage sludge. The biogas production was increased when soluble Fe3+ was reduced to soluble Fe2+. Overall, the MBC was beneficial to the resource utilization of COS and showed a good prospect for improving mesophilic AD performance.
- 28 February 2023
- Published by MDPI AG in International Journal of Environmental Research and Public Health
- Vol. 20 (5) , 4278
Open AccessEffects of Magnetic Biochar Addition on Mesophilic Anaerobic Digestion of Sewage Sludge
As a low-cost additive to anaerobic digestion (AD), magnetic biochar (MBC) can act as an electron conductor to promote electron transfer to enhance biogas production performance in the AD process of sewage sludge and has thus attracted much attention in research and industrial applications. In the present work, Camellia oleifera shell (COS) was used to produce MBC as an additive for mesophilic AD of sewage sludge, in order to explore the effect of MBC on the mesophilic AD process and its enhancement mechanism. Analysis by scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS), Fourier-transform infrared spectrometry (FTIR), and X-ray diffraction (XRD) further confirmed that biochar was successfully magnetized. The yield of biogas from sewage sludge was enhanced by 14.68–39.24% with the addition of MBC, and the removal efficiency of total solid (TS), volatile solids (VS), and soluble chemical oxygen demand (sCOD) were 28.99–46.13%, 32.22–48.62%, and 84.18–86.71%, respectively. According to the Modified Gompertz Model and Cone Model, the optimum dosage of MBC was 20 mg/g TS. The maximum methane production rate (Rm) was 15.58% higher than that of the control reactor, while the lag-phase (λ) was 43.78% shorter than the control group. The concentration of soluble Fe2+ and Fe3+ were also detected in this study to analyze the function of MBC for improving biogas production performance from sewage sludge. The biogas production was increased when soluble Fe3+ was reduced to soluble Fe2+. Overall, the MBC was beneficial to the resource utilization of COS and showed a good prospect for improving mesophilic AD performance.
- Open Access
- 31 December 2022
- Published by MDPI AG in International Journal of Environmental Research and Public Health
- Vol. 20 (1) , 791
Effect of Anoxic Atmosphere on the Physicochemical and Pelletization Properties of Pinus massoniana Sawdust during Storage
The 34-day anoxic storage of Pinus massoniana sawdust (PS) in a sealed constant temperature and humidity chambers was carried out to simulate the limited-oxygen storage process inside piles at industrial scale. The effects of anoxic storage on feedstock’s properties and pelletization process were investigated with respect to elemental composition, dry matter loss, thermogravimetric characteristics, energy consumption, pellets’ density, and microbial communities, etc. After anoxic storage, the microbial community of PS samples was altered, such as the fungi content (Clonostachys, Strelitziana, and Orbilia, etc.), resulting the elemental composition of PS was altered. Thus, the cellulose and ash content of the stored PS were increased, while the hemicellulose, volatile, and fixed carbon were decreased. The energy consumption was increased 7.85–21.98% with the increase in anoxic storage temperature and with the additive of fresh soil collected from PS field in storage process. The single pellet density was altered slightly. Meanwhile, the moisture uptake of PS pellets was decreased. After anoxic storage, the combustion behavior of the stored PS became more stable. The results can be applied directly to guide the development of commercial PS storage and pelletization process currently under development in Asia, Europe and North America.
- 31 December 2022
- Published by MDPI AG in International Journal of Environmental Research and Public Health
- Vol. 20 (1) , 791
Open AccessEffect of Anoxic Atmosphere on the Physicochemical and Pelletization Properties of Pinus massoniana Sawdust during Storage
The 34-day anoxic storage of Pinus massoniana sawdust (PS) in a sealed constant temperature and humidity chambers was carried out to simulate the limited-oxygen storage process inside piles at industrial scale. The effects of anoxic storage on feedstock’s properties and pelletization process were investigated with respect to elemental composition, dry matter loss, thermogravimetric characteristics, energy consumption, pellets’ density, and microbial communities, etc. After anoxic storage, the microbial community of PS samples was altered, such as the fungi content (Clonostachys, Strelitziana, and Orbilia, etc.), resulting the elemental composition of PS was altered. Thus, the cellulose and ash content of the stored PS were increased, while the hemicellulose, volatile, and fixed carbon were decreased. The energy consumption was increased 7.85–21.98% with the increase in anoxic storage temperature and with the additive of fresh soil collected from PS field in storage process. The single pellet density was altered slightly. Meanwhile, the moisture uptake of PS pellets was decreased. After anoxic storage, the combustion behavior of the stored PS became more stable. The results can be applied directly to guide the development of commercial PS storage and pelletization process currently under development in Asia, Europe and North America.