MNM. Furqaan Naiem

M. Furqaan Naiem

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


M. Furqaan Naiem has a total of 39 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Analysis of factors influencing the effectiveness of contractor safety management system implementation on contractor's OHS performance in oil and gas platform and jacket construction project PT. X Bintan

    by Edy Waluyo, Atjo Wahyu, Lalu Muhammad Saleh, M. Furqaan Naiem, Hasnawati Amqam

    This study aims to examine the factors influencing the effectiveness of Contractor Safety Management System (CSMS) implementation and its direct and indirect effects on contractors’ occupational health and safety (OHS) performance in the PT X Oil and Gas Platform and Jacket Construction Project in Bintan Regency. A quantitative cross-sectional design was employed, involving 185 workers selected through proportionate stratified random sampling and analyzed using path analysis with AMOS. The findings show that safety culture (p=0.022), safety behavior (p<0.001), working conditions (p=0.007), and safety communication (p<0.001) significantly influence CSMS effectiveness, while resources and safety training do not show significant effects. In terms of OHS performance, safety culture (p=0.050), resources (p<0.001), safety communication (p=0.003), safety training (p=0.003), and CSMS effectiveness (estimate=0.559; p<0.001) demonstrate significant direct effects. CSMS effectiveness also mediates the relationship between several safety factors and OHS performance. The study concludes that effective CSMS implementation is the most influential factor in improving contractor OHS performance. Practically, strengthening safety culture, improving communication, promoting safe behavior, and ensuring adequate resources and training are essential to enhance safety performance in high-risk oil and gas construction projects.

  • Open Access

    Analysis of The Determinants of Work Fatigue in Aircraft Maintenance Engineers at Sultan Hasanuddin International Airport Makassar

    by Andi Alifah Kultsum Umniyah Tenri, Lalu Muhammad Saleh, M Furqaan Naiem

    Introduction: Occupational Safety and Health (OSH) is important to prevent accidents and fatigue experienced by 32,8% of workers, while in the aviation industry, the shortage of technicians and 24-hour shift work system increases the risk of fatigue that impacts the safety and quality of aircraft maintenance. Method: This research is an analytical observational study with a cross sectional quantitative approach to 106 of 145 Aircraft Maintenance Engineers at Sultan Hasanuddin International Airport Makassar, using KAUPK2, NASA-TLX, PSQI questionnaires, as well as pulse oximeter and BMI measuring instruments, with chi-square analysis and logistic regression through SPSS. Results: The results showed a significant relationship between several variables with work fatigue, namely age (p=0,001) tenure (p=0,002) smoking habits (p=0,000), sleep quality (p=0,002) marital status (p=0,000) physical workload (p=0,000) and mental workload (p=0,008). The logistic regression model proved feasible (p=0,000) and was able to explain 47,6% of the variation in work fatigue, with the most influential variables being age, marital status, physical workload, and smoking habits.Conclusion: This study concludes that job burnout in Aircraft Maintenance Engineers is significantly influenced by age, smoking habits, physical workload, and marital status, thus workload management, quality of life improvement, and work-family balance support need to be prioritized.

  • Open Access

    The Effect of Noise, Vibration, Temperature, and Mental Workload on Work Productivity Through Job Stress at PT. Makassar Tene

    by Natalia Padalling, Syamsiar S. Russeng, M. Furqaan Naiem

    Introduction: Work stress is one of the common problems faced by workers in both formal and informal sectors. In addition to noise, vibration, temperature and mental workload are also factors that affect employee productivity levels.Method: Quantitative research with a cross-sectional design with path analysis. The sample of this study was 100 respondents selected using the Proportionate Stratified Random Sampling technique. Data were collected through questionnaires and measuring instruments.Results: The results of this study indicate that noise significantly affects work stress (p=0,002) does not affect work productivity (p=0,105) work stress as a significant mediator (p=0,002), vibration (WBV) does not affect work stress (p=0,543) does not affect work productivity (p=0,157), work stress as a mediator is not significant (p=0,547), temperature affects work stress (p=0,002), does not affect work productivity (p=0,918), work stress as a significant mediator (p=0,001), mental workload affects work stress (p=0,012), affects work productivity (p=0,042), work stress as a significant mediator (p=0,012).Conclusion: Noise, temperature and mental workload are important factors influencing work productivity and work stress both directly and through work stress as an intervening variable.

  • Open Access

    The Effects of Lighting, Lactic Acid Levels, and Occupational Factors on Performance of Nurses, With Work Fatigue at Latemmamala Regional Hospital

    by Rezki Ramadani, Syamsiar S. Russeng, Lalu Muhammad Saleh, M Furqaan Naiem, Ridwan Amiruddin

    Introduction: Nurse performance can decline due to complaints of work fatigue. Fatigue can occur due to both internal and external factors. Methods: This study used a quantitative cross-sectional approach. The sampling technique used probability sampling resulted in 160 respondents. Results: Lighting (p = 0.002 < 0.05), Lactic Acid (p = 0.000 < 0.05), physical workload (p = 0.000 < 0.05), length of work (p = 0.020 < 0.05), subjective work fatigue (p = 0.000 < 0.05), and objective work fatigue (p = 0.000 < 0.05) had a significant effect on nurse performance, while work shift (p = 0.082 > 0.05) had no effect. In multivariate analysis, the indirect impact of physical workload on nurses' performance through objective work fatigue showed a significant influence.(p = 0.001 < 0.05) and length of work on nurse performance through objective work fatigue had a significant effect (p = 0.011 < 0.05). Conclusions: Physical workload and length of work have an indirect effect on nurse performance through work fatigue. or unstructured, no longer than 250 words; written in the past tense and in the third person singular.

  • Open Access

    Study of Intensity and Stress Due to Noise in Employees in The Production Unit at PT.

    by Muh Fathur Rahman Mt Hardjo, M. Furqan Naiem, Masyita Muis

    Background: The era of industrialization characterized by mechanization, electrification, modernization and the latest technological transformation can lead to processes that generate noise in the workplace. Noise in the workplace can cause noise exposure in the workplace can cause hearing loss and work stress. Therefore, it is important to understand the relationship between workplace noise levels and workers' stress levels. Research purposes: Finding the shape of the contour of worker noise levels and its relationship with worker stress levels. Research methods: Using a cross-sectional design, with a sample size of 78 workers determined using the Accidental Sampling method. Statistical analysis uses the Pearson correlation test. Research result: Shows that the shape of the noise contour is determined by variations in the noise level from the noise source varying from lowest to highest (87.2 dB, 89.9 dB, 91.8 dB, 93.4 dB, 94 dB, 95.6 dB, 100 dB, 101.3 dB, 105.5 dB). Noise exceeding the threshold value reflects the contour shape in some areas. Powerplant noise areas above the threshold value are found in ( Power Plant Lubricating Oil Tank (87.2 dB), Power Plant 1 Boiler Blowdown Tank (94 dB), Power Plant Pump Pipe (91.8 dB), Power Plant 1 Turbine (101 .3 dB), Air Drayer Installation Powerplant (93.4 dB), Plant Process Area noise above the threshold value in several areas ( Concentrator Process Plant (105 dB) BallMill Process Plant (100 dB), Area Concentrator Process Plant (98.8 dB), Concentrate Tank Process Plant (95.6 dB), Fixed Plant Area noise above the threshold value occurred at ( Slacker (89.9 dB), Concentrator (98.8 dB), Concentrate Tank (95.6 dB), and Cleaner Flotation (100 dB). Meanwhile in the Mining area, the highest noise is related to activities such as Exca-2000 Mining (105.5 dB), Drilling Diamond Mining (100 dB), and Drilling RC Mining (105.5 dB). The level of work stress shows that out of a total of 78 workers, 63 of them (around 11.1%) experienced severe stress, while there were no workers who experienced moderate levels of work stress out of a total of 15 workers involved in this research. This research found that there is a very weak and negative correlation between noise levels and work stress on noise risk. The results of the analysis show that the relationship between noise and work stress and noise risk has a correlation value of -0.112. Even though there is a weak negative relationship between these variables, this correlation is not statistically significant with a p-value of 0.327. Conclusion: This research concludes that noise levels in the workplace vary and come from various sources with different intensities. Several areas at PT. X, such as Powerplant, Process Plant, Fixed Plant, and Mining area, have noise that exceeds the threshold value. Research also finds that most workers experience high levels of work stress. Although there was a negative correlation between noise and job stress, the relationship was not statistically significant.


  • Open Access

    The Effects of Work Stress and Workload on Job Satisfaction With its Impact on Employee Performance at PT. Industrial Kapal Indonesia (Persero)

    by Sitti Rahmah Nabilah Siswadi, Masyitha Muis, Yahya Thamrin, Syamsiar S Russeng, Furqaan Naiem, Syamsuar Manyullei

    Objective: Performance is necessary to increase one's capacity to handle competition. Several reasons, such as time constraints, physical and mental exhaustion, and taking on several duties, can lead to excessive workloads, which in turn can cause stress in some employees and lower performance. This study attempts to ascertain the impact of work stress and workload on job satisfaction with its impact on employee performance at PT Industri Kapal Indonesia (Persero). Method: Cross-sectional study design in quantitative research. 104 employees who were chosen by simple random sampling participated in the study. A questionnaire and the Pulse Oximeter Tool were used to measure the variables related to physical workload. Path analysis was used to examine the data using Analysis Moment of Structural (AMOS) software. Results: The results showed that there is an effect of work stress on job satisfaction (p=0.002), work period affects job satisfaction (p=0.000), mental workload affects job satisfaction (p=0.026), physical workload does not affect on job satisfaction (p=0.649), there is no direct effect of work stress on employee performance (p=0.666), work period affects employee performance (p=0.002), mental workload affects employee performance (p=0.014), physical workload affects employee performance (p=0,000), work stress has an indirect effect on employee performance through job satisfaction (p=0.005), work period has an indirect effect on employee performance through job satisfaction (p=0.002), mental workload has an indirect effect on employee performance through job satisfaction (p=0.035), physical workload has no indirect effect on employee performance through job satisfaction (p=0.539). Conclusion: Furthermore, there is a significant impact on workload and work exhaustion. More investigation is being done on additional variables that may impact output at work. Implication of the research: This research can contribute to increasing employee’s awareness of work stress and workload that can have an impact on performance. In the workplace. The results of this study can help companies to reduce the level of stress and workload experienced by employees and can increase employee job satisfaction so that employee performance continues to increase. Originality: This journal presents a study of work stress and workload with its impact on employee performance considering that previous studies have not discussed work stress and physical and mental loads together. These findings explain the importance of maintaining stress levels and physical and mental health in determining the increase and decrease in employee performance.


  • Open Access

    The Influence of Unsafe Behavior and Workspace Arrangement on Occupational Accidents Among Workers at Pt Maruki International Indonesia Makassar

    by Ulvia Muallivasari, M. Furqaan Naiem, Syamsiar S. Russeng, Atjo Wahyu, Masyitha Muis, Anwar Daud

    Objective: Workplace accidents are unplanned and uncontrolled incidents that occur during work due to unsafe actions and unsafe conditions, leading to the interruption of work activities. This study aims to investigate the influence of behavior and workspace layout on workplace acidentes. Method: This research employs a quantitative approach with a case-control study design. Questionnaires were distributed to 57 workers, comprising 19 cases of workplace accidents and 38 controls without workplace accidents at PT Maruki Internasional Indonesia. Collected data include gender, age, tenure, behavior, and workspace layout. The gathered data in Excel tables will be analyzed using chi-square tests and logistic regression analysis. Result: The most common type of workplace accident is found among male workers (OR=4.065 [CI 95%: 0.462-35.752]; p=0.247). Unsafe work behavior (OR=18.417 [CI 95%: 3.656-92.779]; p=0.000) and workspace layout (OR=5.385 [CI 95%: 1.587-18.264]; p=0.010) are significant factors. Further logistic regression analysis reveals that variables influencing workplace accidents at PT Maruki Internasional Indonesia are work behavior and workspace layout Conclussion: Behavior and workspace layout are the most influential risk factors for workplace accidents, with unsafe work behavior being the most significant risk fator. Implication of the research: This research can contribute to raising public awareness about the importance of workplace accident impacts and encourage people to be more cautious while working.


  • Open Access

    Psychosocial Effects and Work Stress on Job Performance on Employees ATC in Makassar City

    by Ismi Febriyanti Syahrir, Lalu Muhammad Saleh, Syamsiar S Russeng, Masyitha Muis, M. Furqaan Naiem, Darmawansyah

    Objective: Since the main responsibility of an Air Traffic Controller (ATC) is to prevent and avoid aircraft collisions, occupational safety and health must be a top priority for ATCs to maintain excellent work performance and be able to direct air traffic. ATCs experience high levels of stress at work, which may influence the occurrence of conflict. Through the use of job stress as an intervening variable, this study sought to examine the direct and indirect effects of interpersonal conflict and family problems on employee performance in the Makassar City air traffic control (ATC) workforce. Method: A quantitative study that takes a cross-sectional method. Using a straightforward random selection technique, 100 employees of ATC’s in MATSC served as the sample size. The SPSS program was used to process data univariately and bivariately, and the AMOS program was used to process data multivariately using path analysis. Results: The results showed that there is a direct effect of workplace conflict (p-value = 0.013), family problems (p-value = 0.001), work stress (p-value = 0.047) on employee performance and has an indirect effect of workplace conflict (p-value = 0.005) and family problems (p-value = 0.008) on employee performance through work stress. Conclusion: This demonstrates that workplace conflict and family problems have a direct and indirect impact on employees' performance through job stress as an intervening variable. Future studies are anticipated to look at aspects besides workplace conflict and family problems that can impact employee performance. Implication of the research: This research can be an important topic for discussion at the AirNav Company, so that awareness arises that the company must be able to provide psychological services to Air Traffic Controller (ATC) employees in Makassar City. Then, the results of this study can help employees related to the elements of the onset of conflict in the workplace and family problems that cause work stress so that employee performance decreases. Originality: This journal presents a study of workplace conflict, family problems and work stress on the performance of Air Traffic Controller employees. Considering that previous studies only tested work stress using a questionnaire measuring instrument, this study uses a work stress measuring instrument, namely a cocorometer, so that it can be a comparison material from previous studies. This study discusses the influence of psychosocial (workplace conflict and family problems) and work stress on job performance in Air traffic controller employees in Makassar City.

  • Open Access

    Analysis of Factors Influencing Work Accidents in the Production Section at PT Industri Kapal Indonesia (Persero)

    by Rizqa Ayu Pratiwi, Yahya Thamrin, Atjo Wahyu, M. Furqaan Naiem, Amran Razak, Aminuddin Syam, Anwar Mallongi

    Background: A work accident is an unwanted incident at work that can result in physical harm or even death. Occupational Health and Safety (OHS) knowledge is still lacking, employees know that PPE has been provided but the attitude of using PPE is still lacking. The purpose of this study was to determine the factors that influence the incidence of work accidents in the production department.   Methods: The research method is a quantitative design with a case control study approach using a simple random sampling technique. Data processing and analysis were carried out using univariate, bivariate, and multivariate analyses.   Results: The results of this study indicate that there is an influence between workers' attitudes towards work accidents (ρ = 0.002). Meanwhile, years of service (ρ=0.185), use of PPE (ρ=0.824), knowledge (ρ=1.000), behavior (ρ=0. 654) and Action (ρ = 1.000) showed no effect on the incidence of work accidents.   Conclusion: Workers with a new work period tend to have more work accidents. The frequency of work accidents unaffected by the use of PPE. In addition, having high or low knowledge does not ensure that an employee will not be exposed to risk factors or have an accident at work, particularly in high-risk industries. The attitudes of employees concerning workplace accidents are influenced. Nonetheless, there is no correlation between employee conduct and the frequency of workplace mishaps. Another result is that one of the factors that might lead to work accidents is human conduct, specifically risky activities.

  • Open Access

    Analysis Of Work Accident Risk In Plywood Production Units Using Job Safety Analysis Method At Pt Intracawood Manufacturing Tarakan City

    by Rezkyana, M. Furqaan Naiem, Atjo Wahyu, Lalu Muhammad Saleh, Ansariadi, Hasnawati Amqam, Anwar Mallongi

    Background: The plywood industry cannot be separated from work accidents, so efforts are needed to reduce the number of work accidents by carrying out work accident control programs, namely by implementing risk management. Therefore, this study aims to analyze the risk of work accidents in the plywood production unit using the Job Safety Analysis method.   Methods: This research is a Mixed Methods research with the research method used is the Sequential Explanatory Design method. Quantitative sampling was carried out by means of probability sampling with 175 respondents and qualitative sampling by taking 5 informants. The research instruments used interview sheets, Job Safety Analysis Worksheets and AS/NZS 4360:2004 as well as questionnaires and observation sheets. Quantitative data analysis using the Semi-Quantitative analysis method using the Job Safety Analysis Worksheet, qualitative data analysis using content analysis with source and method triangulation. Results: The results of the study found that the hazards in the plywood production process included the work environment, the smell of glue and putty paint, the dangers of working tools such as machines. Based on the identification of potential hazards, a risk analysis is carried out on the rotary work unit, there are 2 work steps with a substantial risk level and 6 work steps with a priority 3 risk level. 1 work step with a risk level of the Priority 3 category and 3 work steps with an Acceptable category risk level.   Conclusion: There are several work accidents that are caused by the workers themselves and the work environment. so that control recommendations are given such as making SOPs, providing PPE, conducting training for each work step and providing signs or installing safety signs in places that might cause accidents.