MHMarkus Henke

Markus Henke

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Markus Henke has a total of 37 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Comprehensive review on superconducting cable technologies, designs, applications, and future trends

    by Mahan Fakhrooeian, Markus Henke, Niklas Langmaack

  • Open Access

    A comprehensive review of reliability factors in all-electric aviation

    by Robert Keilmann, Lennart Kösters, Lukas Radomsky, Jonas Franzki, Markus Henke, Michael Heere, Regine Mallwitz

    This paper focuses on the reliability of electric drive systems in electrified aviation, considering thermal, electrical, ambient, and mechanical factors alongside conventional aviation technologies. It reviews degradation mechanisms in conventional gas turbines, fuel cell and battery systems, power electronics, and electric motors. Moreover, the study recommends employing a physics-of-failure approach to analyze the reliability of components and subsystems within electric drive systems. By using tools commonly utilized in aircraft construction and certification for reliability assessment, the paper demonstrates the feasibility of evaluating and improving the reliability of all-electric architectures.


  • Open Access

    Analytical Investigation of Short-Circuit Protection and Post-Fault Operation in Dual Three-Phase PMSMs for Hybrid Electric Counter-Rotating Compressor Applications

    by Yinghui Yang, Markus Henke, Georg Möhlenkamp

    The hybrid electric counter-rotating compressor (CRC) has the potential to improve power-specific fuel consumption in aircraft engines. However, due to its cascaded structure, a reduction or loss of driving power in a single compressor stage can significantly degrade the overall compressor performance. A short-circuit fault is a typical electrical failure in an electric motor that can lead to a complete loss of driving power. One innovative post-fault operation strategy is to utilize the braking capability of the failed motor at low speed to lock its corresponding compressor stage. In this way, the failed stage can function as a stator stage, still providing degraded flow-guiding capability and preventing reverse rotation. This article investigates the short-circuit protection strategy and post-fault operation of dual three-phase permanent magnet synchronous motors (DTP-PMSMs) for hybrid electric CRC applications. Analytical models are developed to characterize the post-fault behavior of the DTP-PMSM. Key design factors are defined, and their influence on post-fault performance is analyzed. Critical post-fault operating points are identified to evaluate and compare different protection strategies. Based on these results, an optimized short-circuit protection strategy is proposed for DTP-PMSMs in CRC applications. Finally, the analytical findings and the proposed strategy are validated through simulation.


  • Open Access

    System-Wide Analysis of Electric Power System for a Reference Short-Range Electrified Aircraft

    by Ahmad Naderi, Robert Keilmann, Arsham Asgari, Abbas Mehraban, Regine Mallwitz, Markus Henke, Michael Terörde

    This study investigates the electrification of a reference short-range passenger aircraft, focusing on optimizing the Electric Power System (EPS). An iterative optimization method is employed to identify the optimal specifications for individual EPS components, considering gravimetric and volumetric power densities and efficiency as single objectives. The study introduces a structured, decoupled optimization framework that isolates the impact of each design variable on weight, volume, and efficiency, providing clearer insights into system-level trade-offs and offering a novel perspective for EPS design. By incorporating component characteristics into the design process, optimal configurations are achieved. Results indicate that certain motor designs enhance EPS performance by reducing weight, increasing efficiency, or minimizing volume, depending on the optimization objective. Similarly, during the optimization process and selection of power electronics configurations, certain topologies demonstrated superior efficiency, while others excelled in different performance criteria. In transmission line selection, superconducting cables are more efficient than conventional cables in minimizing electrical losses at lower voltages, despite being bulkier. Conversely, conventional cables are more advantageous at higher voltage levels due to their lighter weight. Moreover, modular and scalable circuit breakers are recommended for their adaptability across varying voltage levels. The optimization results are further supported by sensitivity analyses that reveal the influence of voltage level, shaft power, and cable technology on overall system metrics. Additionally, feasibility assessments benchmarked against a conventional ATR-72 propulsion system highlight the current limitations of battery integration and the challenging energy density requirements for full electrification.


  • Open Access

    Reliability of Insulation Systems and Its Impact on Electric Machine Design for Automotive and Aviation Applications

    by Arsham Asgari, Lucas Vincent Hanisch, Johanna Anspach, Jonas Franzki, Maik Kahn, Michael Kurrat, Markus Henke

    The growing use of electric machines in safety-critical applications, such as electromobility and electrified aviation, underscores the importance of ensuring their reliability. The reliability of electric machines will increasingly depend on the electrical insulation system (EIS), as they face higher voltage levels, faster switching semiconductors, and more demanding environmental conditions. The influence that the dimensioning of the enameled copper wire and the slot insulation material has on the reliability of the EIS and how different impregnation resins and novel high-thermal-conductivity (HTC) configurations of the slot insulation materials affect it will be demonstrated. This is because in addition to increased reliability, the performance of electrical machines is to be improved at the same time. A case study for an aviation application is used to show how the EIS influences the machine design. Depending on the EIS, the copper and iron losses and the conductor temperature have been investigated with the aim of keeping them as low as possible while simultaneously minimizing the risk of PD.


  • Open Access

    Design Study for a Superconducting High-Power Fan Drive for a Long-Range Aircraft

    by Jan Hoffmann, Wolf-Rüdiger Canders, Markus Henke

    New aerodynamic aircraft concepts enable the storage of volumetric liquid hydrogen (LH2). Additionally, the low temperatures of LH2 enable technologies such as the superconductivity of electrical fan drives and power distribution components. An increased power density of the onboard wiring harness and the electrical machine can be expected. The highest system efficiency and the smallest fuel and tank weight will be achieved with a highly efficient energy conversion by the fuel cell from LH2 to electrical energy. This publication shows a comprehensive study for cryogenic fan drives based on experimental-driven tape superconductor investigations, mission profile-based considerations, design analyses of superconducting electrical machines, and studies of the cooling concepts. A cryogenic system cannot be considered without a feasible cooling concept. Here, an approach with a safe He-based cooling system is proposed, using the LH2 flow to the fuel cell as a heat sink for the losses in the electrical system.


  • Thermal Neural Networks for High-Resolution Temperature Modeling of Electric Traction Machines With Oil Spray Cooling

    by Niels Wiese, Konstantin Etzold, Rocco Reinhardt, Markus Henke

    The demand for competitive electric traction machines expands the boundaries of their overload capability and energy efficiency. This requires an increasingly precise thermal monitoring to ensure protection from thermal damage and temperature dependent control adjustments. Thermal neural networks represent a combination of solely data-driven neural networks and lumped-parameter thermal networks. They have been proven to manage the task of thermal modeling for real-time online applications and even outperform standalone neural networks or lumped-parameter thermal network approaches, while requiring less parametrization effort. However, there is a particular shortage of studies focusing on thermal neural networks for temperature modeling of electric drives with an oil spray cooling. This contribution shall provide a step towards closing this gap. Thereto, a thermal neural network is trained and validated on measurement data of an electric machine with a stator cooling jacket and an oil spray cooling. An analysis of the derived model points out measures to improve the prediction performance or interpretability. The complex thermal system with the oil cooling is adopted by the best network presented in this article with a mean squared error of 0.41 °C 2 on a validation dataset, consolidating the potential of thermal neural networks for online temperature monitoring of electric machines.


  • Open Access

    Modelling the nonlinear system performance of hybrid-electric propulsion systems with aerothermodynamic interdependencies

    by Jan Goeing, Lucas Hanisch, Sebastian Lück, Markus Henke, Jens Friedrichs

    The development of commercial aircraft with hybrid-electric propulsion systems is currently a subject of extensive research in order to improve local air quality and reduce combustion emissions. Among the various types of engines being studied, the two-spool parallel hybrid-electric turbofan engine is particularly challenging due to the low-pressure compressor (LPC). The hybridisation process tends to throttle the LPC, accentuating its significance in the propulsion system. For reliable operation of such systems, accurate predictions of the LPC performance during time-sensitive manoeuvres such as a go-around are important. These manoeuvres are heavily influenced by time-dependent effects that govern the propulsion system’s performance. Often, the aerothermodynamic interplay between these effects is overlooked in propulsion models. In this study, the influence of these aerothermodynamic interdependencies on the modelling results is investigated. To investigate these aerothermodynamic interactions, a dynamic model is developed to simulate the performance of the hybrid-electric turbofan engine. In comparison, a constant mass flow model is used, which is not able to simulate these interdependencies. The results show that the aerothermodynamic interdependencies significantly affect the modelled time-resolved performance, especially for surge margin of the LPC, with this effect becoming more pronounced at higher levels of hybridisation. Therefore, the study recommends the adoption of dynamic simulation methodologies for hybrid-electric engines to guarantee high simulation precision, enhance reliability, and satisfy safety standards.


  • Open Access

    Cryogenically-Cooled Power Electronics for Long-Distance Aircraft

    by Hendrik Schefer, Wolf-Rudiger Canders, Jan Hoffmann, Regine Mallwitz, Markus Henke

    New aerodynamic aircraft concepts enable the storage of volumetric liquid hydrogen (LH2). Additionally, the low temperatures of LH2 allow technologies such as the superconductivity of electrical components. An increased power density of the onboard wiring harness and the electrical machine can be expected. Nevertheless, the power electronic drive inverter has to deliver high power and high switching frequencies (fPWMs) under challenging conditions. Therefore, knowledge of the electric behaviour of different semiconductor materials under cryogenic temperatures is essential to answer the question: "Are modern power electronics a technology enabler or a system bottleneck?" This publication shows a comprehensive novelty study for cryogenic power electronics based on experimental-driven semiconductor investigations, mission profile-based considerations, requirement analyses of superconducting electrical machines, and studies of the cooling concepts. All aspects are discussed within one interdisciplinary publication. A cryogenic system cannot be considered without a feasible cooling concept. Different semiconductor structures based on various materials (silicon (Si), silicon carbide (SiC) and gallium nitride (GaN)) are evaluated for their suitability. The collected data and the literature review draw a technology feasibility studies supported by detailed cooling system analyses and superconducting electrical machine requirements. The power demand and high fPWM lead to a SiC non-cryogenic inverter approach. Due to the detailed cooling system assessment, a loss reduction is achieved by optimising the junction temperature (TJ) under various load cases (LCs) out of the mission profile.


  • Open Access

    Impact of Current Density and Cooling on the Weight Balance of Electrical Propulsion Drives for Aviation

    by Jan Hoffmann, Wolf-Rüdiger Canders, Markus Henke

    Through applying an exemplary design study, the dependencies between current density, temperatures, and weight in an electrical drive system for a small range aircraft with conventional electrical fan or propeller drives are evaluated. This study applies a combined numerical (Finite Element Method FEM) and analytical approach to the machine design, calculation of temperatures, and cooling system design (cooler, pumps, piping). A design scenario was defined using start and climb flight in a warm tropical surrounding as the worst load case. The design has to move between two fixed temperature limits: The maximum allowable temperature in the machine insulation and the ambient temperature. The implemented method facilitates a comparatively fast-medium depth design of the drive system. The derived results show, in fact, a minimum of weight at a certain current density, which is one of the key interests for the designers of the electrical machine. The main influences on this minimum are the temperature drops in the machine, the heat transfer to the cooling fluid, the heat transfer to the cooler wall, and the remaining heat rejection to the ambient. Method and results are transferable to other types of airplanes with different ratings.