AMAlexandre Xavier Mendes

Alexandre Xavier Mendes

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Alexandre Xavier Mendes has a total of 48 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Alginate–methacrylate–RGD microspheres (Alg–MR–MS) for cell expansion and delivery in tissue engineering

    by Alexandre Xavier Mendes, Serena Duchi, Carmine Onofrillo, Ying Zhou, Sanjeev Gambhir, Adriana Teixeira Do Nascimento, Cathal O’COnnell, Steven Posniak, Payal Mukherjee, Gordon G Wallace, et al.

    Clinically relevant cell numbers are essential for many tissue engineering applications, requiring scalable expansion platforms. Microcarrier-based bioreactor systems address this demand; however, conventional non-dissolvable carriers require harsh enzymatic or mechanical detachment, reducing cell viability and integrity. Although dissolvable microcarriers improve recovery, most are designed only for harvesting and lack functionality for downstream tissue engineering. Here, we present a sequential dual-crosslinkable alginate-methacrylate-RGD microsphere system (Alg–MR–MS) that integrates scalable cell expansion with scaffold formation in a single platform. The workflow involves: (1) microsphere fabrication via calcium-mediated ionic crosslinking; (2) three-dimensional cell expansion in a microcarrier culture system; (3) controlled phase change through calcium chelation with sodium citrate, enabling efficient cell recovery while preserving viability and phenotype; and (4) photocrosslinking to form a stable, cell-laden hydrogel suitable for bioprinting and tissue engineering. This sequential dual-crosslinking strategy supports expansion, dissolution, and structural stabilisation within one system. Human adipose-derived stem cells cultured on Alg–MR–MS showed ∼5-fold increased metabolic activity over 7 d, comparable to 2D controls, with high viability and strong attachment. Compared with other dissolvable carriers, Alg–MR–MS offers efficient expansion, rapid phase transition, and simplified single-step fabrication, bridging biomanufacturing and functional tissue engineering.

  • Process–Property–Function Relations Guiding the Modular Design of Biomaterial Composites for Compartmentalized Dual Release

    by Dhivya Venugopal, Alexandre Xavier Mendes, Simon E. Moulton, Satyavrata Samavedi

    Polymeric carriers capable of releasing dual active pharmaceutical ingredients (APIs) are attractive for combination therapy, yet current approaches for coencapsulation of dissimilar APIs intrinsically couple carrier composition, API distribution, and release kinetics. Consequently, such systems exhibit API-carrier incompatibilities, inhomogeneities, and poorly controlled release profiles. To address these limitations, we leverage process–property–function relations to guide the modular design of microsphere-integrated hydrogel composites exhibiting compartmentalized dual release of the hydrophobic corticosteroid budesonide (BUD) and the protein bovine serum albumin (BSA). BUD-loaded poly(dl-lactide-co-glycolide) (PLGA) microspheres were prepared using a flow-focusing microfluidic platform, wherein processing conditions were systematically tuned to achieve monodisperse microspheres exhibiting a coefficient of variation below 5%. Slow, sustained release of BUD over 28 days with minimal initial burst was modulated by both microsphere size and drug concentration. Independently, BSA-loaded gelatin methacrylamide (GelMA) hydrogels with tunable stiffness were prepared by photo-cross-linking, wherein in situ photorheology was used to monitor reaction kinetics. BSA exhibited diffusion-dominated release from hydrogels over 7 days, reaching ∼80% cumulative release irrespective of protein loading or macromer concentration. Integration of microspheres into hydrogels enhanced the compressive modulus without altering cross-linking rates or swelling behavior. The phase-dependent release behavior of both APIs was retained in the composites, with comparable Korsmeyer–Peppas exponents providing qualitative support for similar diffusion-dominated release behavior. The process–property–function design framework established in this work enables phase-dependent API release from modular biomaterial composites while preserving carrier-specific functionality and retaining independent control over material properties.

  • Label-Free and In Situ Glycophenotyping Using a Glycocalyx-Mimetic Electrochemical Transducer

    by Thiago Coimbra Pimenta, Alexandre Xavier Mendes, Ronil J. Rath, Luiza Aguiar Do Nascimento, Vatsala Pithaih, Henry F. F. Bellette, Eliza Grills, Andreas Behren, Dênio E. Pires Souto, George Wren Greene, et al.

    Rapid glycophenotyping is often limited by biofouling, reliance on complex, multistep labeling, and poor access to living cell surfaces. Here, however, we introduce a glycocalyx-mimetic electrochemical interface that converts lectin-glycan binding into multiplex electrical signals. We coat gold electrodes with a self-assembled brush of lubricin (PRG4), whose densely O-glycosylated mucin domains present tumor-associated truncated O-glycans that serve as linkers to the lectins, our recognition elements. Embedding six lectins within lubricin enables orthogonal recognition of Gal-GalNAc-terminated oligosaccharides. In an electrochemical culture-plate format, the resulting sensor supports real-time, in situ glycophenotyping of melanoma cells, achieving quantitative agreement to a conventional, end point, lectin microarray. This glycocalyx-mimetic transducer thus enables the rapid, label-free screening of lectin-glycan interactions and the profiling of diagnostically relevant, tumor-associated glycans.

  • Tetra-Polyethylene Glycol Hydrogel Coating Enhances the Performance and Stability of Electrochemical Sensors in Complex Biological Matrices

    by Thien Tien Nguyen, Alexandre X. Mendes, Vatsala Pithaih, Henry F. F. Bellette, Thiago Coimbra Pimenta, Simon E. Moulton, Ronil J. Rath, George Wren Greene, Kevin W. Plaxco, Saimon M. Silva

    Electrochemical aptamer-based (EAB) sensors promise real-time, reagent-free drug and biomarker monitoring, but protein adsorption and enzymatic degradation of their target-recognizing aptamers rapidly depress their signal and induce drift in complex matrices, such as saliva or undiluted whole blood. Size-excluding hydrogels offer an approach to reducing these effects, but the problem remains of achieving long-duration operation without significantly throttling the analyte transport or electron transfer to the electrode. In response, here we show that a tetra-poly(ethylene glycol) (tetra-PEG) hydrogel coating forms a soft, highly hydrated, ∼31 nm mesh network that excludes large glycoproteins and cellular components, reduces drift while preserving electron transfer, and enables acceptably rapid small-molecule access. Specifically, in undiluted saliva and bovine blood, this coating reduces electrode fouling and helps sustain EAB performance. For example, in undiluted whole blood at 37 °C, hydrogel-protected sensors exhibit lower drift over 8 h (∼5.7 vs ∼25.1% for unprotected controls) while maintaining a comparable signal gain across the tested vancomycin concentrations. It thus appears that the tetra-PEG hydrogel network can balance antifouling efficacy and nuclease resistance with electron transfer compatibility, suggesting that it may prove to be a practical route to long-duration, in-matrix, and, ultimately, in vivo monitoring using EAB sensors.


  • Point-of-Need PFAS Detection: A Yes/No Biosensor Solution

    by Henry F. F. Bellette, Dênio E. Pires Souto, Alexandre Xavier Mendes, Simon E. Moulton, Thiago Coimbra Pimenta, Vatsala Pithaih, George W. Greene, Saimon M. Silva

    Perfluoroalkyl and polyfluoroalkyl substances (PFAS) pose one of the world's most prominent chemical health threats and are detected in virtually everything from the Antarctic environment to human blood. Due to the extreme half-lives and omnipresent distribution of the chemical class, the threat cannot be eliminated but rather must be continuously monitored and managed through widespread sample testing and targeted remediation long term. Unfortunately, the current standard detection method, liquid chromatography/tandem mass spectrometry (LC/MS/MS), is expensive, time-consuming, and limited to use by highly trained professionals in centralized laboratories. For this reason, there is an urgent need for a field-deployable, affordable, and easy-to-use device for PFAS detection. This paper addresses the issue with a protein-based electrochemical sensor for the point-of-need detection of perfluorooctanoic acid (PFOA), which is one commonly regulated PFAS compound of particular concern. Using two proteins, lubricin (LUB, proteoglycan 4) and human liver fatty acid binding protein engineered with a methylene blue redox tag (FABP1-MB), a response to PFOA is detected at 0.41 ng/L and 0.41 μg/L concentrations. Detection of PFOA is also demonstrated in real water and whole blood samples, demonstrating the sensors' possible future application for both environmental and biomedical monitoring.


  • Open Access

    Electrical characterisation of conductive hydrogels for biomedical applications

    by Emily R. Briggs, Alexandre Xavier Mendes, Adriana Texixeira Do Nascimento, Simon E. Moulton, Jonny J. Blaker, Sarah H. Cartmell


  • Integrating Graphene Oxide-Hydrogels and Electrical Stimulation for Controlled Neurotrophic Factor Encapsulation: A Promising Approach for Efficient Nerve Tissue Regeneration

    by Alexandre Xavier Mendes, Lilith Caballero Aguilar, Adriana Teixeira Do Nascimento, Serena Duchi, Mirren Charnley, David R. Nisbet, Anita F. Quigley, Robert M. I. Kapsa, Saimon Moraes Silva, Simon E. Moulton

    Nerve growth factor (NGF) plays a crucial role in cellular growth and neurodifferentiation. To achieve significant neuronal regeneration and repair using in vitro NGF delivery, spatiotemporal control that follows the natural neuronal processes must be developed. Notably, a challenge hindering this is the uncontrolled burst release from the growth factor delivery systems. The rapid depletion of NGF reduces treatment efficacy, leading to poor cellular response. To address this, we developed a highly controllable system using graphene oxygen (GO) and GelMA hydrogels modulated by electrical stimulation. Our system showed superior control over the release kinetics, reducing the burst up 30-fold. We demonstrate that the system is also able to sequester and retain NGF up to 10-times more efficiently than GelMA hydrogels alone. Our controlled release system enabled neurodifferentiation, as revealed by gene expression and immunostaining analysis. The increased retention and reduced burst release from our system show a promising pathway for nerve tissue engineering research toward effective regeneration.


  • Wired for Success: Probing the Effect of Tissue-Engineered Neural Interface Substrates on Cell Viability

    by Adriana Teixeira Do Nascimento, Alexandre X. Mendes, Serena Duchi, Daniela Duc, Lilith C. Aguilar, Anita F. Quigley, Robert M. I. Kapsa, David R. Nisbet, Paul R. Stoddart, Saimon M. Silva, et al.

    This study investigates the electrochemical behavior of GelMA-based hydrogels and their interactions with PC12 neural cells under electrical stimulation in the presence of conducting substrates. Focusing on indium tin oxide (ITO), platinum, and gold mylar substrates supporting conductive scaffolds composed of hydrogel, graphene oxide, and gold nanorods, we explored how the substrate materials affect scaffold conductivity and cell viability. We examined the impact of an optimized electrical stimulation protocol on the PC12 cell viability. According to our findings, substrate selection significantly influences conductive hydrogel behavior, affecting cell viability and proliferation as a result. In particular, the ITO substrates were found to provide the best support for cell viability with an average of at least three times higher metabolic activity compared to platinum and gold mylar substrates over a 7 day stimulation period. The study offers new insights into substrate selection as a platform for neural cell stimulation and underscores the critical role of substrate materials in optimizing the efficacy of neural interfaces for biomedical applications. In addition to extending existing work, this study provides a robust platform for future explorations aimed at tailoring the full potential of tissue-engineered neural interfaces.


  • A tissue-engineered neural interface with photothermal functionality

    by Adriana Teixeira Do Nascimento, Alexandre Xavier Mendes, James M. Begeng, Serena Duchi, Paul R. Stoddart, Anita F. Quigley, Robert M. I. Kapsa, Michael R. Ibbotson, Saimon M. Silva, Simon E. Moulton

    Neural interfaces are well-established as a tool to understand the behaviour of the nervous system via recording and stimulation of living neurons, as well as serving as neural prostheses.


  • Open Access

    Reagentless protein-based electrochemical biosensors

    by Saimon M. Silva, Miaosi Li, Alexandre Xavier Mendes, Simon E. Moulton

    The creation of reagentless protein-based biosensors that are capable of monitoring molecular analytes directly in bodily fluids could revolutionize our understanding of biology and personalized health monitoring.