Sayyed Asghar Gholamian
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Sayyed Asghar Gholamian has a total of 72 co-authors. Here are the top co-authors by number of shared publications:
- Mohammad Yazdani-Asrami
University of Glasgow
8 shared publications Mohammad Verij Kazemi
Faculty of Electrical and Computer Engineering, Babol Noshirvani University of Technology, Babol, Iran
5 shared publicationsJafar Adabi
Department of Electrical and Computer Engineering, Babol Noshirvani University of Technology, Babol, Iran
4 shared publications- Jafar Adabi
Babol Noshirvani University of Technology
4 shared publications Ali Izanlo
Faculty of Electrical and Computer Engineering, Babol Noshirvani University of Technology, Babol, Iran
3 shared publications- Asef Ghabeli
Institute for Technical Physics, Karlsruhe Institute of Technology, Karlsruhe, Germany
3 shared publications
Latest Publications
- Open Access
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 14, 160335-160349
A Hyperparameter-Tuned Random Forest Classifier for Mechanical Fault Discrimination in Induction Motors Using Statistical Features Extracted From Current and Vibration Signals
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 14, 160335-160349
Open AccessA Hyperparameter-Tuned Random Forest Classifier for Mechanical Fault Discrimination in Induction Motors Using Statistical Features Extracted From Current and Vibration Signals
- 2 April 2024
- Published by Taylor & Francis in Electric Power Components and Systems
- Vol. 53 (11) , 1-13
A New Model for Matching Asks and Bids in P2P Energy Trading: Game Theory Method
1. In recent years, traditional consumers have transformed the energy trading market by installing Distributed Energy Resources and energy storage systems [1]. These traditional consumers who are a...
- 2 April 2024
- Published by Taylor & Francis in Electric Power Components and Systems
- Vol. 53 (11) , 1-13
A New Model for Matching Asks and Bids in P2P Energy Trading: Game Theory Method
1. In recent years, traditional consumers have transformed the energy trading market by installing Distributed Energy Resources and energy storage systems [1]. These traditional consumers who are a...
- Open Access
- 1 December 2023
- Published by Apex Publishing in Journal of Iranian Association of Electrical and Electronics Engineers
- Vol. 20 (4) , 33-45
A Generalized Control Strategy Based on Circuit-Level Decoupling Concept for Vienna Rectifier under Grid Unbalance
In this paper, a generalized discontinuous modulation strategy based on circuit-level decoupling concept (GCLD-DPWM) is presented for Vienna rectifier under unbalanced grid condition. The purpose of the proposed control scheme, is not only to sustain the advantages of the conventional method such as switching loss mitigation, reducing the complexity of the ...
- 1 December 2023
- Published by Apex Publishing in Journal of Iranian Association of Electrical and Electronics Engineers
- Vol. 20 (4) , 33-45
Open AccessA Generalized Control Strategy Based on Circuit-Level Decoupling Concept for Vienna Rectifier under Grid Unbalance
In this paper, a generalized discontinuous modulation strategy based on circuit-level decoupling concept (GCLD-DPWM) is presented for Vienna rectifier under unbalanced grid condition. The purpose of the proposed control scheme, is not only to sustain the advantages of the conventional method such as switching loss mitigation, reducing the complexity of the ...
- 27 March 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 38 (7) , 8115-8125
Virtual Flux Direct Power Control for Vienna Rectifier Under Unbalanced Grid
The Vienna rectifier is being broadly utilized in many industrial applications, which makes it essential to address its challenges. This article conducts the virtual flux-based direct power control and proposes an improved switching table for the Vienna rectifier under a balanced or unbalanced grid's voltage. Accordingly, the proposed method improves the THD of the three-phase input current when the grid voltage is unbalanced. Moreover, employing the virtual flux concept eliminates the use of three-phase input voltage. This results in reducing the cost of the converter. One of the challenges in the Vienna rectifier is to consider the current direction of the control design. Accordingly, the proposed switching table is designed based on the input current's sector. Furthermore, the positive and negative sequences of the input currents and virtual flux are utilized to correctly estimate the instantaneous input active and reactive power under the unbalanced grid voltage condition. Moreover, the proposed method can balance the output capacitors in balanced and unbalanced grid voltage conditions. This method possesses a high dynamic response due to hysteresis bands. Finally, a 430-W laboratory prototype of the Vienna rectifier is implemented, and the accuracy of the proposed VFDPC is verified through the experimental results.
- 27 March 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 38 (7) , 8115-8125
Virtual Flux Direct Power Control for Vienna Rectifier Under Unbalanced Grid
The Vienna rectifier is being broadly utilized in many industrial applications, which makes it essential to address its challenges. This article conducts the virtual flux-based direct power control and proposes an improved switching table for the Vienna rectifier under a balanced or unbalanced grid's voltage. Accordingly, the proposed method improves the THD of the three-phase input current when the grid voltage is unbalanced. Moreover, employing the virtual flux concept eliminates the use of three-phase input voltage. This results in reducing the cost of the converter. One of the challenges in the Vienna rectifier is to consider the current direction of the control design. Accordingly, the proposed switching table is designed based on the input current's sector. Furthermore, the positive and negative sequences of the input currents and virtual flux are utilized to correctly estimate the instantaneous input active and reactive power under the unbalanced grid voltage condition. Moreover, the proposed method can balance the output capacitors in balanced and unbalanced grid voltage conditions. This method possesses a high dynamic response due to hysteresis bands. Finally, a 430-W laboratory prototype of the Vienna rectifier is implemented, and the accuracy of the proposed VFDPC is verified through the experimental results.
- 31 January 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
Analysis of a Double Stator Flux Reversal Permanent Magnet Machine With Halbach Array Magnets
Flux reversal permanent magnet (FRPM) machines have been capturing a lot of attention due to their outstanding features such as robust structure, good thermal management, and high fault tolerance capability. However, existing of leakage flux between adjacent magnets, lack of flux focusing effect as well as small area of slots leads to poor torque performance in these types of machines. To enhance the torque characteristic, a novel double stator flux reversal machine with Halbach array magnets (DS-HFRPM) is introduced in this paper. The topology, working principle, and the impacts of major design parameters of the presented machine are investigated, respectively. To show the superiority of the developed design, the performance of the DS-HFRPM machine is then compared with a double stator flux reversal machine with triple-PM excitation (T-DSCPFRPMM) under the same overall dimensions, current excitation, rotor pole number, and nearly identical PM volume with aid of finite element analysis (FEA). The outcomes revealed that the DS-HFRPM machine offers better torque performance as well as magnet usage efficiency compared to its counterpart.
- 31 January 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
Analysis of a Double Stator Flux Reversal Permanent Magnet Machine With Halbach Array Magnets
Flux reversal permanent magnet (FRPM) machines have been capturing a lot of attention due to their outstanding features such as robust structure, good thermal management, and high fault tolerance capability. However, existing of leakage flux between adjacent magnets, lack of flux focusing effect as well as small area of slots leads to poor torque performance in these types of machines. To enhance the torque characteristic, a novel double stator flux reversal machine with Halbach array magnets (DS-HFRPM) is introduced in this paper. The topology, working principle, and the impacts of major design parameters of the presented machine are investigated, respectively. To show the superiority of the developed design, the performance of the DS-HFRPM machine is then compared with a double stator flux reversal machine with triple-PM excitation (T-DSCPFRPMM) under the same overall dimensions, current excitation, rotor pole number, and nearly identical PM volume with aid of finite element analysis (FEA). The outcomes revealed that the DS-HFRPM machine offers better torque performance as well as magnet usage efficiency compared to its counterpart.
- 15 June 2022
- Published by Taylor & Francis in Electric Power Components and Systems
- Vol. 50 (9-10) , 530-537
Detection of Partial Demagnetization Fault in Wind Turbine Permanent Magnet Generator Using a Data-Driven Method
Generators are one of the vital elements in power systems. Although the probability of fault in generators is not significant, the occurrence of a small fault may lead to huge and irreparable damages to the power system and the generator itself. This research is done with the aim of detecting partial demagnetization fault in wind turbine permanent magnet generators using data-driven methods. In order to realize correct and accurate fault signals, the fault modeling and simulation approach based on the finite element analysis method is used to simulate the PMSG generator. A 24-slot 4-pole generator is simulated as a case study using the finite element method and FEM software. Subsequently, the fast Fourier transform method is used to extract the signal, and the magnetic fault is simulated using the finite element method in Flux software. Also, the counter-electromotive force signal for 100 fault modes from one to one hundred is gradually extracted with one percent steps. The developed artificial neural network is recognized the corresponding class of each signal correctly. Demagnetization fault modeling in an artificial neural network can correctly classify all fault signals except one signal. As a result, the accuracy of the artificial neural network modeling the demagnetization fault has reached 95%.
- 15 June 2022
- Published by Taylor & Francis in Electric Power Components and Systems
- Vol. 50 (9-10) , 530-537
Detection of Partial Demagnetization Fault in Wind Turbine Permanent Magnet Generator Using a Data-Driven Method
Generators are one of the vital elements in power systems. Although the probability of fault in generators is not significant, the occurrence of a small fault may lead to huge and irreparable damages to the power system and the generator itself. This research is done with the aim of detecting partial demagnetization fault in wind turbine permanent magnet generators using data-driven methods. In order to realize correct and accurate fault signals, the fault modeling and simulation approach based on the finite element analysis method is used to simulate the PMSG generator. A 24-slot 4-pole generator is simulated as a case study using the finite element method and FEM software. Subsequently, the fast Fourier transform method is used to extract the signal, and the magnetic fault is simulated using the finite element method in Flux software. Also, the counter-electromotive force signal for 100 fault modes from one to one hundred is gradually extracted with one percent steps. The developed artificial neural network is recognized the corresponding class of each signal correctly. Demagnetization fault modeling in an artificial neural network can correctly classify all fault signals except one signal. As a result, the accuracy of the artificial neural network modeling the demagnetization fault has reached 95%.
- 9 September 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Smart Grid
- Vol. 13 (1) , 381-392
Adaptive Frequency Control of Microgrid Based on Fractional Order Control and a Data-Driven Control With Stability Analysis
In this paper, a new adaptive fractional frequency control method for microgrids(MG) and low inertia networks is presented. The newly proposed grid frequency control is based on the droop and inertia controller for doubly-fed induction generator (DFIG) wind turbine (WT) using a data-driven algorithm. Also, in this paper, to ensure the grid frequency stability, the stability region boundary has been calculated using the parameter space method for above and below synchronous speeds. In the first step in the proposed method, a data-driven control (DDC) is used to update the frequency control coefficients. In the second step, in order to deployment more frequency data and to use both frequency error concavity and slope, the utilization of fractional gradient descent (FGD) and fractional inertia control is proposed. In the third step to maintain frequency stability, the updated frequency controller coefficients are compared with the stability region boundary. If the updated frequency controller coefficients are in the authorized band, they are applied. To test the proposed idea is a simulated real grid in Ontario, Canada. The simulation results indicate the proper operation of the control system in transient and steady-state and under different conditions.
- 9 September 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Smart Grid
- Vol. 13 (1) , 381-392
Adaptive Frequency Control of Microgrid Based on Fractional Order Control and a Data-Driven Control With Stability Analysis
In this paper, a new adaptive fractional frequency control method for microgrids(MG) and low inertia networks is presented. The newly proposed grid frequency control is based on the droop and inertia controller for doubly-fed induction generator (DFIG) wind turbine (WT) using a data-driven algorithm. Also, in this paper, to ensure the grid frequency stability, the stability region boundary has been calculated using the parameter space method for above and below synchronous speeds. In the first step in the proposed method, a data-driven control (DDC) is used to update the frequency control coefficients. In the second step, in order to deployment more frequency data and to use both frequency error concavity and slope, the utilization of fractional gradient descent (FGD) and fractional inertia control is proposed. In the third step to maintain frequency stability, the updated frequency controller coefficients are compared with the stability region boundary. If the updated frequency controller coefficients are in the authorized band, they are applied. To test the proposed idea is a simulated real grid in Ontario, Canada. The simulation results indicate the proper operation of the control system in transient and steady-state and under different conditions.
- 8 March 2021
- Published by Springer Nature in Electrical Engineering
- Vol. 103 (6) , 2561-2572
Voltage control approach based on PCPM distributed algorithm in the presence of high PV penetration: a stochastic modeling
- 8 March 2021
- Published by Springer Nature in Electrical Engineering
- Vol. 103 (6) , 2561-2572
Voltage control approach based on PCPM distributed algorithm in the presence of high PV penetration: a stochastic modeling
- 10 November 2020
- Published by Wiley in International Transactions on Electrical Energy Systems
- Vol. 31 (1)
Valuation of reactive power support provided by photovoltaic systems in distribution networks
- 10 November 2020
- Published by Wiley in International Transactions on Electrical Energy Systems
- Vol. 31 (1)
Valuation of reactive power support provided by photovoltaic systems in distribution networks