Matteo Guasti
Research Subjects
Matteo Guasti has a total of 23 co-authors. Here are the top co-authors by number of shared publications:
- Nicola Puletti
Council for Agricultural Research and Economics (CREA), Research Centre for Forestry and Wood, v.le S. Margherita, 80 - 52100, Arezzo, Italy
8 shared publications - Simone Innocenti
Council for Agricultural Research and Economics (CREA), Research Centre for Forestry and Wood, v.le S. Margherita, 80 - 52100, Arezzo, Italy
5 shared publications - Carlotta Ferrara
Council for Agricultural Research and Economics, Research Centre for Forestry and Wood, (CREA-FL), Rome, Italy
3 shared publications - Cesar Alvites
School of Forest, Fisheries, and Geomatics Sciences, University of Florida, Gainesville, FL 32611, USA
2 shared publications - Alessandro Campanaro
Council for Agricultural Research and Economics, Research Centre for Plant Protection and Certification, Florence, Italy
1 shared publication - Alice Lenzi
Council for Agricultural Research and Economics, Research Centre for Plant Protection and Certification, Florence, Italy
1 shared publication
Latest Publications
- Open Access
- 11 March 2026
- Published by Springer Nature in Annals of Forest Science
- Vol. 83 (1)
Tree-LiMS: a dataset of multi-temporal UAV LiDAR and multispectral data at single-tree level in European beech (Fagus sylvatica L.) forests of the Alpe di Catenaia, Italy
Key Message: This dataset offers high-resolution multi-temporal data on European beech tree dynamics, collected through UAV LiDAR and multispectral sensors at Alpe di Catenaia, Central Italy. It tracks architectural and phenological changes under different forest management regimes, providing valuable insights for ecological research and forest management. The data can be accessed at https://doi.org/10.5281/zenodo.14650937 , with comprehensive metadata available to facilitate its use and interpretation and a standardised metadatafile at https://metadata-afs.nancy.inra.fr/geonetwork/srv/fre/catalog.search#/metadata/30e8c7be-de64-4a83-8fea-0610feb7f74f .
- 11 March 2026
- Published by Springer Nature in Annals of Forest Science
- Vol. 83 (1)
Open AccessTree-LiMS: a dataset of multi-temporal UAV LiDAR and multispectral data at single-tree level in European beech (Fagus sylvatica L.) forests of the Alpe di Catenaia, Italy
Key Message: This dataset offers high-resolution multi-temporal data on European beech tree dynamics, collected through UAV LiDAR and multispectral sensors at Alpe di Catenaia, Central Italy. It tracks architectural and phenological changes under different forest management regimes, providing valuable insights for ecological research and forest management. The data can be accessed at https://doi.org/10.5281/zenodo.14650937 , with comprehensive metadata available to facilitate its use and interpretation and a standardised metadatafile at https://metadata-afs.nancy.inra.fr/geonetwork/srv/fre/catalog.search#/metadata/30e8c7be-de64-4a83-8fea-0610feb7f74f .
- 1 June 2025
- Published by Elsevier in Agricultural and Forest Meteorology
- Vol. 372
CrowNet: a trail-camera canopy monitoring system
- 1 June 2025
- Published by Elsevier in Agricultural and Forest Meteorology
- Vol. 372
CrowNet: a trail-camera canopy monitoring system
- Open Access
- 23 April 2025
- Published by MDPI AG in Remote Sensing
- Vol. 17 (9) , 1497
Improving Aboveground Biomass Estimation in Beech Forests with 3D Tree Crown Parameters Derived from UAV-LS
Accurate estimates of aboveground biomass (AGB) are essential for forest policies to reduce carbon emissions. Unmanned aerial laser scanning (UAV-LS) offers unprecedented millimetric detail but is underutilized in monitoring broadleaf Mediterranean forests compared to coniferous ones. This study aims to design and evaluate a procedure for AGB estimates based on the predictive power of crown features. In the first step, we manually created Quantitative Structure Models (QSMs) for 320 trees using data from UAV laser scanning (UAV-LS), airborne laser scanning (ALS), and co-registered terrestrial laser scanning (TLS). This provided the most accurate non-destructive estimate of aboveground biomass (AGB) in the absence of destructive measurements. For each reference tree we also measured crown projection and crown volume to build two separated models relating AGB to such crown features. In the second phase, we evaluated the potential of UAV-LS for quantifying AGB in a pure European beech (Fagus sylvatica) forest and compared it with traditional ALS estimates, using fully automatic procedures. The two obtained tree-level AGB models were then tested using three datasets derived from 35 sampling plots over the same study area: (a) 1130 trees manually segmented (phase-2 reference); (b) trees automatically extracted from ALS data; and (c) trees automatically extracted from UAV-LS data. Results demonstrate that detailed UAV-LS data improve model sensitivity compared to ALS data (RMSE = 45.6 Mg ha−1, RMSE% = 13.4%, R2 = 0.65, for the best ALS model; RMSE = 44.0 Mg ha−1, RMSE% = 12.9%, R2 = 0.67, for the best UAV-LS model), allowing for the detection of AGB differences even in quite homogenous forest structures. Overall, this study demonstrates the combined use of both laser scanner data can foster non-destructive and more precise AGB estimation than the use of only one, in forested areas across hectare scales (1 to 100 ha).
- 23 April 2025
- Published by MDPI AG in Remote Sensing
- Vol. 17 (9) , 1497
Open AccessImproving Aboveground Biomass Estimation in Beech Forests with 3D Tree Crown Parameters Derived from UAV-LS
Accurate estimates of aboveground biomass (AGB) are essential for forest policies to reduce carbon emissions. Unmanned aerial laser scanning (UAV-LS) offers unprecedented millimetric detail but is underutilized in monitoring broadleaf Mediterranean forests compared to coniferous ones. This study aims to design and evaluate a procedure for AGB estimates based on the predictive power of crown features. In the first step, we manually created Quantitative Structure Models (QSMs) for 320 trees using data from UAV laser scanning (UAV-LS), airborne laser scanning (ALS), and co-registered terrestrial laser scanning (TLS). This provided the most accurate non-destructive estimate of aboveground biomass (AGB) in the absence of destructive measurements. For each reference tree we also measured crown projection and crown volume to build two separated models relating AGB to such crown features. In the second phase, we evaluated the potential of UAV-LS for quantifying AGB in a pure European beech (Fagus sylvatica) forest and compared it with traditional ALS estimates, using fully automatic procedures. The two obtained tree-level AGB models were then tested using three datasets derived from 35 sampling plots over the same study area: (a) 1130 trees manually segmented (phase-2 reference); (b) trees automatically extracted from ALS data; and (c) trees automatically extracted from UAV-LS data. Results demonstrate that detailed UAV-LS data improve model sensitivity compared to ALS data (RMSE = 45.6 Mg ha−1, RMSE% = 13.4%, R2 = 0.65, for the best ALS model; RMSE = 44.0 Mg ha−1, RMSE% = 12.9%, R2 = 0.67, for the best UAV-LS model), allowing for the detection of AGB differences even in quite homogenous forest structures. Overall, this study demonstrates the combined use of both laser scanner data can foster non-destructive and more precise AGB estimation than the use of only one, in forested areas across hectare scales (1 to 100 ha).
- Open Access
- 13 July 2024
- Published by MDPI AG in Remote Sensing
- Vol. 16 (14) , 2576
A Semi-Automatic Approach for Tree Crown Competition Indices Assessment from UAV LiDAR
Understanding the spatial heterogeneity of forest structure is crucial for comprehending ecosystem dynamics and promoting sustainable forest management. Unmanned aerial vehicle (UAV) LiDAR technology provides a promising method to capture detailed three-dimensional (3D) information about forest canopies, aiding in management and silvicultural practices. This study investigates the heterogeneity of forest structure in broadleaf forests using UAV LiDAR data, with a particular focus on tree crown features and their different information content compared to diameters. We explored a non-conventionally used method that emphasizes crown competition by employing a nearest neighbor selection technique based on metrics derived from UAV point cloud profiles at the tree level, rather than traditional DBH (diameter at breast height) spatial arrangement. About 300 vegetation elements within 10 plots collected in a managed Beech forest were used as reference data. We demonstrate that crown-based approaches, which are feasible with UAV LiDAR data at a reasonable cost and time, significantly enhances the understanding of forest heterogeneity, adding new information content for managers. Our findings underscore the utility of UAV LiDAR in characterizing the complexity and variability of forest structure at high resolution, offering valuable insights for carbon accounting and sustainable forest management.
- 13 July 2024
- Published by MDPI AG in Remote Sensing
- Vol. 16 (14) , 2576
Open AccessA Semi-Automatic Approach for Tree Crown Competition Indices Assessment from UAV LiDAR
Understanding the spatial heterogeneity of forest structure is crucial for comprehending ecosystem dynamics and promoting sustainable forest management. Unmanned aerial vehicle (UAV) LiDAR technology provides a promising method to capture detailed three-dimensional (3D) information about forest canopies, aiding in management and silvicultural practices. This study investigates the heterogeneity of forest structure in broadleaf forests using UAV LiDAR data, with a particular focus on tree crown features and their different information content compared to diameters. We explored a non-conventionally used method that emphasizes crown competition by employing a nearest neighbor selection technique based on metrics derived from UAV point cloud profiles at the tree level, rather than traditional DBH (diameter at breast height) spatial arrangement. About 300 vegetation elements within 10 plots collected in a managed Beech forest were used as reference data. We demonstrate that crown-based approaches, which are feasible with UAV LiDAR data at a reasonable cost and time, significantly enhances the understanding of forest heterogeneity, adding new information content for managers. Our findings underscore the utility of UAV LiDAR in characterizing the complexity and variability of forest structure at high resolution, offering valuable insights for carbon accounting and sustainable forest management.
- Open Access
Streamlining the alignment of UAV and TLS forest point clouds: an approach based on ground and tree stems
Accurate co-registration of terrestrial and aerial point clouds may provide a high-resolution description of tree components for large forest areas. However, an automated approach for co-registering point clouds is still needed, given the challenges in geospatial data processing, particularly in complex topographical conditions. The main objective of this study is to present the application of a novel procedure for the co-registration of point clouds obtained from terrestrial and UAV surveys in Mediter-ranean forests.
Open AccessStreamlining the alignment of UAV and TLS forest point clouds: an approach based on ground and tree stems
Accurate co-registration of terrestrial and aerial point clouds may provide a high-resolution description of tree components for large forest areas. However, an automated approach for co-registering point clouds is still needed, given the challenges in geospatial data processing, particularly in complex topographical conditions. The main objective of this study is to present the application of a novel procedure for the co-registration of point clouds obtained from terrestrial and UAV surveys in Mediter-ranean forests.
- Open Access
Comparative analysis of taper models for Pinus nigra: A study across parametric, semi-parametric, and non-parametric models using terrestrial laser scanner acquired data
Taper equations are indispensable tools for characterizing the stem profile of trees, providing valuable insights for forest management, timber inventory, and optimal assortments allocation. The recent progress in Terrestrial Laser Scanning (TLS) has revolutionized forest inventory practices by enabling non-destructive data collection. In this study, four taper models from three different model categories were established based on point cloud data of 219 Pinus nigra trees. The taper equations fitted with TLS data were used to predict the diameter at specific stem heights and the total stem volume. The results show that among fitted models, the Max and Burkhart segmented model calibrated by the means of a mixed-effects approach provided the best estimate of the diameter at different heights and the total stem volume evaluated for different diameter at breast height (DBH) classes. In numerical terms, this model estimated the diameter and the volume with a respective overall error of 0.781 cm and 0.021 m3. The predicted profile also shows that above a relative height of 0.7, the diameter error tends to increase due to the low reliability of data collected beyond the base of the crown primarily caused by interference from branches and leaves. Nevertheless, this study shows that TLS technology presents a compelling opportunity and a promising non-destructive alternative for generating taper profiles and estimating tree volume.
Open AccessComparative analysis of taper models for Pinus nigra: A study across parametric, semi-parametric, and non-parametric models using terrestrial laser scanner acquired data
Taper equations are indispensable tools for characterizing the stem profile of trees, providing valuable insights for forest management, timber inventory, and optimal assortments allocation. The recent progress in Terrestrial Laser Scanning (TLS) has revolutionized forest inventory practices by enabling non-destructive data collection. In this study, four taper models from three different model categories were established based on point cloud data of 219 Pinus nigra trees. The taper equations fitted with TLS data were used to predict the diameter at specific stem heights and the total stem volume. The results show that among fitted models, the Max and Burkhart segmented model calibrated by the means of a mixed-effects approach provided the best estimate of the diameter at different heights and the total stem volume evaluated for different diameter at breast height (DBH) classes. In numerical terms, this model estimated the diameter and the volume with a respective overall error of 0.781 cm and 0.021 m3. The predicted profile also shows that above a relative height of 0.7, the diameter error tends to increase due to the low reliability of data collected beyond the base of the crown primarily caused by interference from branches and leaves. Nevertheless, this study shows that TLS technology presents a compelling opportunity and a promising non-destructive alternative for generating taper profiles and estimating tree volume.
- Open Access
TreeArchTraits: an R package to analyse the architectural traits of trees using TLS data
1 The architecture of trees is significantly influenced by their interactions, directly affecting their functioning and structural development. Different tree architectural indicators (TAT) have evolved, including these interactions’ measurements. Recent advances in Terrestrial Laser Scanning data collection make measuring the three-dimensional characteristics of trees more more efficient. The R package TreeArchTraits facilitates the processing of three-dimensional tree characteristics obtained through Terrestrial Laser Scanning, enabling the computation of various indices. A set of trees belonging to different forest conditions was used to demonstrate the TreeArchTraits potential for characterizing tree architectures. Abstract Figure:
Open AccessTreeArchTraits: an R package to analyse the architectural traits of trees using TLS data
1 The architecture of trees is significantly influenced by their interactions, directly affecting their functioning and structural development. Different tree architectural indicators (TAT) have evolved, including these interactions’ measurements. Recent advances in Terrestrial Laser Scanning data collection make measuring the three-dimensional characteristics of trees more more efficient. The R package TreeArchTraits facilitates the processing of three-dimensional tree characteristics obtained through Terrestrial Laser Scanning, enabling the computation of various indices. A set of trees belonging to different forest conditions was used to demonstrate the TreeArchTraits potential for characterizing tree architectures. Abstract Figure:
- Open Access
Mapping Understory Vegetation Density in Mediterranean Forests: Insights from Airborne and Terrestrial Laser Scanning Integration
The understory is an essential ecological and structural component of forest ecosystems. The lack of efficient, accurate, and objective methods for evaluating and quantifying the spatial spread of understory characteristics over large areas is a challenge for forest planning and management, with specific regard to biodiversity and habitat governance. In this study, we used terrestrial and airborne laser scanning (TLS and ALS) data to characterize understory in a European beech and black pine forest in Italy. First, we linked understory structural features derived from traditional field measurements with TLS metrics, then, we related such metrics to the ones derived from ALS. Results indicate that (i) the upper understory density (5–10 m above ground) is significantly associated with two ALS metrics, specifically the mean height of points belonging to the lower third of the ALS point cloud within the voxel (HM1/3) and the corresponding standard deviation (SD1/3), while (ii) for the lower understory layer (2–5 m above ground), the most related metric is HM1/3 alone. As an example application, we have produced a map of forest understory for each layer, extending over the entire study region covered by ALS data, based on the developed spatial prediction models. With this study, we also demonstrated the power of hand-held mobile-TLS as a fast and high-resolution tool for measuring forest structural attributes and obtaining relevant ecological data.
Open AccessMapping Understory Vegetation Density in Mediterranean Forests: Insights from Airborne and Terrestrial Laser Scanning Integration
The understory is an essential ecological and structural component of forest ecosystems. The lack of efficient, accurate, and objective methods for evaluating and quantifying the spatial spread of understory characteristics over large areas is a challenge for forest planning and management, with specific regard to biodiversity and habitat governance. In this study, we used terrestrial and airborne laser scanning (TLS and ALS) data to characterize understory in a European beech and black pine forest in Italy. First, we linked understory structural features derived from traditional field measurements with TLS metrics, then, we related such metrics to the ones derived from ALS. Results indicate that (i) the upper understory density (5–10 m above ground) is significantly associated with two ALS metrics, specifically the mean height of points belonging to the lower third of the ALS point cloud within the voxel (HM1/3) and the corresponding standard deviation (SD1/3), while (ii) for the lower understory layer (2–5 m above ground), the most related metric is HM1/3 alone. As an example application, we have produced a map of forest understory for each layer, extending over the entire study region covered by ALS data, based on the developed spatial prediction models. With this study, we also demonstrated the power of hand-held mobile-TLS as a fast and high-resolution tool for measuring forest structural attributes and obtaining relevant ecological data.