Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Jinling Zhang has a total of 35 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Corrosion Behavior of X80 Steel With Superhydrophobic Coating in Alternating Oil‐Water Immersion Environments

    by Wenlei Yan, Qiang Li, Jinling Zhang, Fanxi Yang, Yanchong Yu, Ru Ma, Ziwen Zhang

    A superhydrophobic coating was fabricated on X80 steel to evaluate its corrosion behavior in alternating oil‐water immersion environments. The coating achieved a water contact angle of 154.5° and exhibited a micro‐nano rough structure. After alternating immersion, the corrosion current density of the superhydrophobic coating decreased to an extremely low value, yielding an inhibition efficiency of 99.05%. This study proposes a corrosion dynamic model for the oil‑water alternating environment. The mechanism is that oil displaces trapped air in the rough structure, anchoring a durable oil film that blocks corrosive species, whereas bare steel lacks this retention, resulting in poorer protection.

  • Composite coating synergistic effect and mechanism: Corrosion behaviour of ZK61M in simulated sweat

    by Jie Pan, Qiang Li, Jinling Zhang, Cong Chang, Yanchong Yu, Ru Ma


  • Achieving a trade-off of high strength and low thermal expansion in invar steel via synergy of dislocations and vanadium carbonitrides

    by Yan-Chong Yu, Hui Liu, Shuo Zhang, Cai-Dong Zhang, Xue-Ting Liu, Zhong-Hua Sun, Jin-Ling Zhang, Cong Chang


  • Study on the Corrosion Resistance Mechanism of Nitric Acid Passivation on 316L and SUS329J3L Duplex Stainless Steels in a Denitrification Agent

    by Yuanneng Dong, Jinling Zhang, Yanchong Yu, Fanxi Yang, Jie Pan, Shebin Wang

    316L and DSS 2205 suffer from pitting corrosion in a denitrification agent, NaClO2 solution, despite their excellent corrosion resistance and widespread utilization in plants. Herein, nitric acid passivation was successfully employed to enhance the corrosion resistance of 316L and DSS 2205 in 3% NaClO2 solution. The 3% NaClO2 solution, in which 316L and DSS showed the lowest corrosion rate, was chosen by electrochemically studying the effect of NaClO2 concentration on the steel's corrosion from a series of solutions containing 1%, 3%, 6%, and 10% NaClO2. The passive films with and without nitric passivation were investigated by chemical composition, electrochemical property, semiconductor behavior, and morphology observation analyses. The enhanced corrosion resistance of both 316L and DSS 2205 after nitric passivation was attributed to the Cr enrichment and decreased active area on the steel surface. The semiconductor property test and point defect model showed that both the reduced doping density and the decreased diffusivity contributed better resistance against ClO2- and Cl-. The passivated 316L showed better corrosion resistance according to electrochemical tests and potentially is an option to replace high-cost DSS 2205.


  • Effect of La on inclusion evolution and solidification structure of 40Cr steel

    by Wang-Wang Mao, Yan-Chong Yu, Le-Ru Zhang, Jin-Ling Zhang, Wei Yan, An-Min Zheng, She-Bin Wang


  • Revealing the Effect of Ce on Pitting Corrosion Induced by Inclusions in Low Alloy Steel: Induction by CaS·C12A7 and Inhibition by CeAlO3

    by Leru Zhang, Yanchong Yu, Wangwang Mao, Jinling Zhang, Cong Chang, Shaohua Zhang, Wei Yan

    Low alloy steel faces localized corrosion issues in service environments, primarily due to pitting corrosion induced by inclusions. Conventional protective measures cannot significantly improve the corrosion resistance of the steel. In this study, an effective industrial approach was proposed to enhance the corrosion resistance of low alloy steels. Cerium (Ce) was added during the refining process to modify inclusions and alter the mechanism of inclusion-induced localized corrosion, thereby improving the substrate's ability to inhibit pitting corrosion. The effect of Ce treatment on the cleanliness of molten steel was investigated, and a kinetic model of inclusion evolution was established based on thermodynamic calculations. The pitting corrosion induced by CaSC12A7 and CeAlO3 inclusions was studied through immersion experiments over different durations. The degree of corrosion after being soaked for 20 min was significantly different. The size and depth of pitting pits induced by CeAlO3 inclusions were much smaller than those induced by CaSC12A7 inclusions. The electron back scatter diffraction tests confirmed that CaSC12A7 inclusions exhibited a higher corrosion sensitivity compared to CeAlO3, thus promoting the initiation of pitting. Electrochemical tests demonstrated a positive shift in the corrosion potential and a reduction in current density. This implies that CeAlO3 inclusions can significantly inhibit pitting occurrences. Based on the dissolution behaviors of CaSC12A7 and CeAlO3 inclusions, a kinetic model was established to describe the initiation and propagation of pitting induced by these inclusions.


  • Effect of Cerium on Inclusion Evolution and Pitting Corrosion of Nb-Microalloyed Steel

    by Leru Zhang, Yanchong Yu, Jinling Zhang, Wangwang Mao, Shebin Wang, Zhonghua Sun, Yong Wan

    Nb-microalloyed steels are widely used in construction engineering fields due to their excellent mechanical properties, but they face serious corrosion problems in service environments. Pitting corrosion is the severest form of corrosion, and the types of inclusions are the leading cause to induce pitting corrosion. A new strategy is proposed to enhance the corrosion resistance of steels by achieving a beneficial transformation of inclusions with Ce treatment. In this paper, two types of Nb-microalloyed steels (0% Ce and 0.0058% Ce steel) were prepared to study the modification effect on inclusions in industrial production. The spherical CaS•C12A7 inclusions were modified to smaller ellipsoidal Ce2O2S inclusions, and the proportion of inclusions (0–2 μm) increased significantly from 27 to 66%, while large inclusions (>6 μm) disappeared. A kinetic model of inclusion evolution was established. The results of electrochemical tests indicated that the corrosion potential was positively shifted, and the corrosion current was reduced after Ce treatment. Additionally, the number of defects in the passivation film was decreased, and the corrosion resistance of the steel was significantly improved. The addition of Ce changed the types of inclusions and reduced the number of pitting nucleation points, which led to a remarkable reduction in the number and size of pitting pits. The mechanism of pitting corrosion induced by different types of inclusions was further investigated, and a pitting corrosion model was modeled based on the immersion experiments. Research results provide theoretical support for enhancing the corrosion resistance of steel.


  • Degradation Behavior of Medical MgZZC-1 in Various Simulated Body Fluids

    by Jie Pan, Jinling Zhang, Yelei Li, Fanxi Yang, Yanchong Yu, Shebin Wang

    Magnesium-based biodegradable metal bone implants exhibit superior mechanical properties compared to biodegradable polymers for orthopedic and cardiovascular stents. In this study, MgZZC-x (x = 1, 1.2) alloys were screened by in vitro biocompatibility tests in three simulated body fluids under nontoxic conditions. The MgZZC-1 alloys with better biocompatibility were selected to predict the days required for complete degradation. The evolution of degradation products was analyzed, and the mechanism of formation of the product film was inferred. A degradation kinetic model was established to investigate the effect of MEM components on the degradation of the alloys. The results demonstrate that the proteins in MEM can greatly retard the degradation progress by attaching to the surface of MgZZC-1 alloys, which are predicted to degrade completely within 341 days. The carbonate and phosphate buffers were adjusted to pH in MEM solution, delaying the degradation of magnesium alloys. This process in MEM more accurately reflects the actual degradation in the body and is superior to that in Hanks and SBF solutions. This study will promote the application of biodegradable materials in clinical medicine.


  • Preparation of Superhydrophobic Coating on X80 Steel and Its Corrosion Resistance in Oilfield Produced Water

    by Fanxi Yang, Jinling Zhang, Jie Pan, Yangli Liu, Yanchong Yu, Shebin Wang

    Corrosion is an unavoidable issue that steel encounters during service; however, the generic methods employed for corrosion prevention often need high cost or preparation conditions. In this study, a facile chemical replacement deposition method was proposed to realize an anticorrosion superhydrophobic coating on a X80 steel surface. The growth mechanism of the rough structure and its impact on the wettability of the superhydrophobic coating were analyzed. The superhydrophobic coating, deposited for 50 s and modified for 30 min, achieved optimal electrochemical properties and a maximum water contact angle. The immersion test, in the saturated CO2 oilfield produced water, demonstrated the better corrosion resistance of superhydrophobic coating than X80 steel. Correspondingly, a kinetic corrosion model was established to analyze the anticorrosion mechanism. In summary, this method significantly improves the corrosion resistance of X80 steel and is attractive for other industrial fields.


  • Corrosion Inhibition Mechanism of Water-Soluble Imidazoline on A572 Gr.65 Steel in 3.5 wt % NaCl Solution

    by Jinling Zhang, Fanxi Yang, Yue Dai, Yangli Liu, Yanchong Yu, Shebin Wang

    To optimize the economic advantages and corrosion-resisting property of A572 Gr.65 steels, the inhibition effect of water-soluble imidazoline on the sample surface with rare earth was explored in a 3.5 wt % NaCl solution. In this paper, the mechanism of corrosion and the adsorptive behavior of water-soluble imidazoline inhibitors on A572 Gr.65 steels with 47 ppm of rare earth in saltwater solution were discussed, along with the establishment of the adsorption model. Achievements proposed that the inhibition efficiency of water-soluble imidazoline was as high as 95.73% at 80 mg L-1 dosage following an anodic-dominated mixed-type inhibition mechanism. Besides, the scanning electron microscopy and X-ray diffraction analysis revealed that the corrosion inhibitor resulted in a smoother and more stable rust layer with a significant reduction of the γ-FeOOH. Theoretical calculations confirmed that imidazoline formed a unimolecular layer adsorption film on the steel surface, exhibiting adherence to both Langmuir and Frumkin adsorption isotherms, involving physical and chemical adsorption.