Suna Balci
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Suna Balci has a total of 12 co-authors. Here are the top co-authors by number of shared publications:
Aylin Tecimer
Gazi Univ, Fac Engn, Dept Chem Engn, Ankara, Turkey
1 shared publicationEsin Eren
Chemical Engineering Department, Faculty of Engineering, Gazi University, Ankara, Turkey
1 shared publicationFatma Tomul
Department of Chemistry, Faculty of Arts and Science, Burdur Mehmet Akif Ersoy University, Burdur, Turkey
1 shared publication- Fatma Tomul
Burdur Mehmet Akif Ersoy University, Faculty of Arts and Science, Chemistry Department, 15100 Burdur, Turkey
1 shared publication - Filiz Akti
Hitit University
1 shared publication - Gülce Açıl
Gazi Üniversitesi
1 shared publication
Latest Publications
- 15 December 2026
- Published by Turkish Academy of Sciences
- p. 275-290
"Büyük Endüstriyel Kazaların Riskinin Azaltılmasında Tarihsel Evrim: BEKRA ve Seveso Direktifi Uyum Sürecinin Türkiye Açısından Analitik Değerlendirilmesi"
"Major industrial accidents constitute one of the most critical risk areas of modern industrial societies due to their high destructive effects despite their low probabilities of occurrence. Cases throughout history prove that these events arise not only from technical failures, but also from organizational weaknesses, systemic deficiencies, human factors, and inadequately designed safety systems. Root cause analyses reveal that the underlying causes of accidents are the insufficient analysis of reaction kinetics, the failure to correctly evaluate the accident chain developing after the loss of control, and, most importantly, the failure to keep risk analyses up to date. This situation proves that process safety should not be limited only to engineering design; it makes a holistic approach encompassing operational discipline, human factors, and organizational learning capacity necessary. The dioxin release that occurred in the town of Seveso, Italy, as a result of the uncontrolled shutdown of a reactor and the failure to correctly evaluate the by-products that could be released, fundamentally changed the European perspective on industrial safety and paved the way for the issuance of the first Seveso Directive. The Seveso Directives established within the European Union and the Regulation on the Prevention of Major Industrial Accidents and Mitigation of Their Effects (BEKRA Regulation), which entered into force in our country in line with these directives, constitute the fundamental legal and technical infrastructure for the prevention of accidents and minimization of their damages within the scope of technological disaster management. The Bhopal tragedy, which occurred despite the first directive being in force, and the Baia Mare accident, which resulted in environmental damage crossing national borders, became milestones in industrial safety and enabled the principle of “preventability of accidents” to be replaced by a more comprehensive understanding of “risk management.” In this process, critical requirements such as the domino effect, land-use planning, and informing the public were introduced into the directives. Lessons learned from experienced industrial accidents reveal that the “prescriptive” approach alone is not sufficient in the integration of safety management systems into processes. Current requirements make it necessary to adopt a “performance-based” approach that goes beyond the set of rules. Although significant progress has been made in our country in terms of regulatory compliance, there are still areas for improvement regarding process safety culture, organizational learning processes, and the internalization of advanced risk analysis techniques. For effective accident risk management, compliance with only regulatory parameters should not be considered sufficient; a performance-based, holistic, and sustainable process safety strategy should be ensured to permeate all operational processes. It is of critical importance that future studies strengthen interdisciplinary approaches and focus particularly on safety culture and organizational learning processes."
- 15 December 2026
- Published by Turkish Academy of Sciences
- p. 275-290
"Büyük Endüstriyel Kazaların Riskinin Azaltılmasında Tarihsel Evrim: BEKRA ve Seveso Direktifi Uyum Sürecinin Türkiye Açısından Analitik Değerlendirilmesi"
"Major industrial accidents constitute one of the most critical risk areas of modern industrial societies due to their high destructive effects despite their low probabilities of occurrence. Cases throughout history prove that these events arise not only from technical failures, but also from organizational weaknesses, systemic deficiencies, human factors, and inadequately designed safety systems. Root cause analyses reveal that the underlying causes of accidents are the insufficient analysis of reaction kinetics, the failure to correctly evaluate the accident chain developing after the loss of control, and, most importantly, the failure to keep risk analyses up to date. This situation proves that process safety should not be limited only to engineering design; it makes a holistic approach encompassing operational discipline, human factors, and organizational learning capacity necessary. The dioxin release that occurred in the town of Seveso, Italy, as a result of the uncontrolled shutdown of a reactor and the failure to correctly evaluate the by-products that could be released, fundamentally changed the European perspective on industrial safety and paved the way for the issuance of the first Seveso Directive. The Seveso Directives established within the European Union and the Regulation on the Prevention of Major Industrial Accidents and Mitigation of Their Effects (BEKRA Regulation), which entered into force in our country in line with these directives, constitute the fundamental legal and technical infrastructure for the prevention of accidents and minimization of their damages within the scope of technological disaster management. The Bhopal tragedy, which occurred despite the first directive being in force, and the Baia Mare accident, which resulted in environmental damage crossing national borders, became milestones in industrial safety and enabled the principle of “preventability of accidents” to be replaced by a more comprehensive understanding of “risk management.” In this process, critical requirements such as the domino effect, land-use planning, and informing the public were introduced into the directives. Lessons learned from experienced industrial accidents reveal that the “prescriptive” approach alone is not sufficient in the integration of safety management systems into processes. Current requirements make it necessary to adopt a “performance-based” approach that goes beyond the set of rules. Although significant progress has been made in our country in terms of regulatory compliance, there are still areas for improvement regarding process safety culture, organizational learning processes, and the internalization of advanced risk analysis techniques. For effective accident risk management, compliance with only regulatory parameters should not be considered sufficient; a performance-based, holistic, and sustainable process safety strategy should be ensured to permeate all operational processes. It is of critical importance that future studies strengthen interdisciplinary approaches and focus particularly on safety culture and organizational learning processes."
- Open Access
- 20 April 2026
- Published by Politeknik Dergisi in Journal of Polytechnic
- Vol. 29 (4) , 1-15
Hidrotermal Olarak Sentezlenen Xonotlit ve Tobermorit Ara Fazlarının Isı Yalıtkanı Olarak Wollastonit Oluşumu Üzerindeki Etkileri
Hidrotermal yöntemle farklı Ca/Si oranları, su/katı (w/s) oranı, reaksiyon sıcaklığı ve sürelerinde sentezlenen tobermorit ve xonotlit kalsiyum silikat hidrat ara fazlarının 800 oC’de kalsinasyonu ile oluşturulan wollastonit fazı üzerine etkileri detaylı şekilde araştırılmıştır. TGA-DTA sonuçları, 200 oC’de sentezlenen malzemelerin daha düşük kütle kaybı ve β-wollastonit oluşumunu temsil eden keskin egzotermik pikler ile daha verimli nihai faza dönüşümü sağlayacağını ortaya koymuştur. FTIR analizleri, 200 oC’de xonotlit benzeri düzenli kristal yapılar, 150 oC’de ise tobermorit benzeri amorf fazların oluştuğunu göstermiştir. Uzun reaksiyon süreleri, amorf C–S–H birikimini artırarak ara fazların kristal kalitesini olumsuz etkilemiştir. Artan w/s oranı iyon taşınımını ve silikat çözünürlüğünü artırarak xonotlit oluşumunu desteklemiştir. Sıcaklık, Ca/Si ve w/s oranlarının kontrollü seçiminin, kristal öncül faz oluşumunda, ardından wollastonite dönüşümünde kritik rol oynadığı görülmüştür. 900 oC’de α-wollastonit faz oluşumu söz konusu olmakla birlikte, wollastonit yapının 1100 oC’ye kadar termal kararlılığını koruduğu belirlenmiştir.
- 20 April 2026
- Published by Politeknik Dergisi in Journal of Polytechnic
- Vol. 29 (4) , 1-15
Open AccessHidrotermal Olarak Sentezlenen Xonotlit ve Tobermorit Ara Fazlarının Isı Yalıtkanı Olarak Wollastonit Oluşumu Üzerindeki Etkileri
Hidrotermal yöntemle farklı Ca/Si oranları, su/katı (w/s) oranı, reaksiyon sıcaklığı ve sürelerinde sentezlenen tobermorit ve xonotlit kalsiyum silikat hidrat ara fazlarının 800 oC’de kalsinasyonu ile oluşturulan wollastonit fazı üzerine etkileri detaylı şekilde araştırılmıştır. TGA-DTA sonuçları, 200 oC’de sentezlenen malzemelerin daha düşük kütle kaybı ve β-wollastonit oluşumunu temsil eden keskin egzotermik pikler ile daha verimli nihai faza dönüşümü sağlayacağını ortaya koymuştur. FTIR analizleri, 200 oC’de xonotlit benzeri düzenli kristal yapılar, 150 oC’de ise tobermorit benzeri amorf fazların oluştuğunu göstermiştir. Uzun reaksiyon süreleri, amorf C–S–H birikimini artırarak ara fazların kristal kalitesini olumsuz etkilemiştir. Artan w/s oranı iyon taşınımını ve silikat çözünürlüğünü artırarak xonotlit oluşumunu desteklemiştir. Sıcaklık, Ca/Si ve w/s oranlarının kontrollü seçiminin, kristal öncül faz oluşumunda, ardından wollastonite dönüşümünde kritik rol oynadığı görülmüştür. 900 oC’de α-wollastonit faz oluşumu söz konusu olmakla birlikte, wollastonit yapının 1100 oC’ye kadar termal kararlılığını koruduğu belirlenmiştir.
- 4 January 2023
- Published by Elsevier in Materials Chemistry and Physics
- Vol. 297
Silica xerogel and iron doped silica xerogel synthesis in presence of drying control chemical additives
- 4 January 2023
- Published by Elsevier in Materials Chemistry and Physics
- Vol. 297
Silica xerogel and iron doped silica xerogel synthesis in presence of drying control chemical additives
- 24 November 2022
- Published by Springer Nature in Journal of Porous Materials
- Vol. 30 (3) , 899-909
Catalytic Deoxygenation of Oleic Acid over Synthesized Ni@CMK-3 Catalyst using Analytical Py-GC/MS and TG-FTIR
- 24 November 2022
- Published by Springer Nature in Journal of Porous Materials
- Vol. 30 (3) , 899-909
Catalytic Deoxygenation of Oleic Acid over Synthesized Ni@CMK-3 Catalyst using Analytical Py-GC/MS and TG-FTIR
- 24 November 2022
- Published by Elsevier in Journal of Environmental Management
- Vol. 326 (Pt B) , 116835
Catalytic wet peroxide oxidation of phenol through mesoporous silica-pillared clays supported iron and/or titanium incorporated catalysts
- 24 November 2022
- Published by Elsevier in Journal of Environmental Management
- Vol. 326 (Pt B) , 116835
Catalytic wet peroxide oxidation of phenol through mesoporous silica-pillared clays supported iron and/or titanium incorporated catalysts
- 15 December 2018
- Published by Walter de Gruyter GmbH in International Journal of Chemical Reactor Engineering
- Vol. 17 (6)
Structural Property Improvements of Bentonite with Sulfuric Acid Activation and a Test in Catalytic Wet Peroxide Oxidation of Phenol
The acid activation of bentonite from Middle Anatolia, consisting of mostly montmorillonite, with a hot solution of H 2 SO 4 with different concentrations was carried out. SEM images, nitrogen sorption isotherms and FTIR spectra were used to examine structural changes of the bentonite with acid activation. Acid–base titration method was applied to determine surface acidities. SEM images, nitrogen sorption isotherms indicated that the acid activation caused considerable increases both in the surface area and pore volumes by changing the morphology and aluminum content. FTIR spectra showed the enhancement both in Lewis and Brønsted acidities, significant increases in H–bonding to the structure with acid concentration. Acid treatment gave good structural properties with high surface acidity. Stable structured acid activated bentonite with 2 M was tested in catalytic wet peroxide oxidation (CWPO) of phenol together with raw bentonite. Around 96 % phenol removal was achieved in 135 minutes at reaction temperature of 50 °C while the raw bentonite did not show good results. The data were in agreement with the first order dependency with respect to phenol.
- 15 December 2018
- Published by Walter de Gruyter GmbH in International Journal of Chemical Reactor Engineering
- Vol. 17 (6)
Structural Property Improvements of Bentonite with Sulfuric Acid Activation and a Test in Catalytic Wet Peroxide Oxidation of Phenol
The acid activation of bentonite from Middle Anatolia, consisting of mostly montmorillonite, with a hot solution of H 2 SO 4 with different concentrations was carried out. SEM images, nitrogen sorption isotherms and FTIR spectra were used to examine structural changes of the bentonite with acid activation. Acid–base titration method was applied to determine surface acidities. SEM images, nitrogen sorption isotherms indicated that the acid activation caused considerable increases both in the surface area and pore volumes by changing the morphology and aluminum content. FTIR spectra showed the enhancement both in Lewis and Brønsted acidities, significant increases in H–bonding to the structure with acid concentration. Acid treatment gave good structural properties with high surface acidity. Stable structured acid activated bentonite with 2 M was tested in catalytic wet peroxide oxidation (CWPO) of phenol together with raw bentonite. Around 96 % phenol removal was achieved in 135 minutes at reaction temperature of 50 °C while the raw bentonite did not show good results. The data were in agreement with the first order dependency with respect to phenol.
- 1 March 2015
- Published by Elsevier in Applied Surface Science
- Vol. 330, 455-464
Physicochemical properties of vanadium impregnated Al-PILCs: Effect of vanadium source
- 1 March 2015
- Published by Elsevier in Applied Surface Science
- Vol. 330, 455-464
Physicochemical properties of vanadium impregnated Al-PILCs: Effect of vanadium source
- 20 August 2012
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
- Vol. 51 (34) , 11091-11096
Boron Oxide Production Kinetics Using Boric Acid as Raw Material
- 20 August 2012
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
- Vol. 51 (34) , 11091-11096
Boron Oxide Production Kinetics Using Boric Acid as Raw Material
- 17 November 2009
- Published by Walter de Gruyter GmbH in International Journal of Chemical Reactor Engineering
- Vol. 7 (1)
Activity Comparison of MCM-41 and V-MCM-4 Catalysts for Ethanol Selective Oxidation and DRIFTS Analysis
The activity of a V-MCM-41 catalyst with a V/Si molar ratio of 0.04 was compared with the activity of a pure MCM-41 catalyst and some DRIFTS studies were performed in order to understand the mechanism of selective oxidation of ethanol. V-MCM-41 was found to be much more active than pure MCM-41, favouring the formation of high amounts of ethylene over 300°C. MCM-41, on the other hand, was found to favour the formation of acetaldehyde over ethylene at all studied temperatures. It was shown by reaction findings that over V-MCM-41, ethylene was produced mainly in the presence of gas phase oxygen whereas acetaldehyde was produced using the lattice oxygen even in the absence of gas phase oxygen. DRIFTS studies indicated the formation of acetaldehyde molecules from acetate-like surface species which were formed by the removal of a hydrogen atom from the ?-carbon of chemisorbed ethoxy species by the help of the lattice oxygen. On the other hand, removal of a hydrogen atom from the ?-carbon of the ethoxy species, in the presence of gas phase oxygen, resulted in the formation of vinyl-like surface species which then yielded ethylene molecules.
- 17 November 2009
- Published by Walter de Gruyter GmbH in International Journal of Chemical Reactor Engineering
- Vol. 7 (1)
Activity Comparison of MCM-41 and V-MCM-4 Catalysts for Ethanol Selective Oxidation and DRIFTS Analysis
The activity of a V-MCM-41 catalyst with a V/Si molar ratio of 0.04 was compared with the activity of a pure MCM-41 catalyst and some DRIFTS studies were performed in order to understand the mechanism of selective oxidation of ethanol. V-MCM-41 was found to be much more active than pure MCM-41, favouring the formation of high amounts of ethylene over 300°C. MCM-41, on the other hand, was found to favour the formation of acetaldehyde over ethylene at all studied temperatures. It was shown by reaction findings that over V-MCM-41, ethylene was produced mainly in the presence of gas phase oxygen whereas acetaldehyde was produced using the lattice oxygen even in the absence of gas phase oxygen. DRIFTS studies indicated the formation of acetaldehyde molecules from acetate-like surface species which were formed by the removal of a hydrogen atom from the ?-carbon of chemisorbed ethoxy species by the help of the lattice oxygen. On the other hand, removal of a hydrogen atom from the ?-carbon of the ethoxy species, in the presence of gas phase oxygen, resulted in the formation of vinyl-like surface species which then yielded ethylene molecules.
- 1 January 2009
- Published by Elsevier in Applied Clay Science
- Vol. 43 (1) , 13-20
Characterization of Al, Cr-pillared clays and CO oxidation
- 1 January 2009
- Published by Elsevier in Applied Clay Science
- Vol. 43 (1) , 13-20
Characterization of Al, Cr-pillared clays and CO oxidation