CGChao Gao

Chao Gao

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Chao Gao has a total of 98 co-authors. Here are the top co-authors by number of shared publications:

  • Yingjun Liu

    MOE Key Laboratory of Macromolecular Synthesis and Functionalization International Research Center For X Polymers Zhejiang Key Laboratory of Advanced Organic Materials and Technologies Research Center for Advanced Fibers Department of Polymer Science and Engineering Zhejiang University Hangzhou China

    13 shared publications
  • Zhen Xu

    MOE Key Laboratory of Macromolecular Synthesis and Functionalization, Department of Polymer Science and Engineering, Zhejiang University, Hangzhou, China

    11 shared publications
  • Weiwei Gao

    6 shared publications
  • Zhen Xu

    MOE Key Laboratory of Macromolecular Synthesis and Functionalization International Research Center For X Polymers Zhejiang Key Laboratory of Advanced Organic Materials and Technologies Research Center for Advanced Fibers Department of Polymer Science and Engineering Zhejiang University Hangzhou China

    6 shared publications
  • Peng Li

    MOE Key Laboratory of Macromolecular Synthesis and Functionalization International Research Center For X Polymers Zhejiang Key Laboratory of Advanced Organic Materials and Technologies Research Center for Advanced Fibers Department of Polymer Science and Engineering Zhejiang University Hangzhou China

    5 shared publications
  • Bo Wang

    MOE Key Laboratory of Macromolecular Synthesis and Functionalization International Research Center For X Polymers Zhejiang Key Laboratory of Advanced Organic Materials and Technologies Research Center for Advanced Fibers Department of Polymer Science and Engineering Zhejiang University Hangzhou China

    4 shared publications

Latest Publications

  • Highly Thermally Conductive yet Structurally Stable Graphene/Ceramic Fiber for Extreme Thermal Protection

    by Yue Yu, Xin Ming, Bo Wang, Yingjun Liu, Peng Li, Kai Pang, Ying Zhang, Zheng Liu, Qiang Song, Zhen Xu, et al.

    Carbon fiber (CF) holds promise for preparing thermal protection materials for extreme high‐temperature applications. However, the performance of typical thermal protection materials composed of CF and ceramic coating remains inadequate mainly because of the low thermal conductivity and weak interfacial stability. Here, starting from the graphene fiber (GF) with thermal conductivity of ∼1200 W m −1 K −1 , we report highly thermally conductive and structurally stable graphene/titanium carbide fiber (GTF) with well‐defined core–shell structure via a one‐step molten salt synthesis approach. With an optimal shell thickness of 1 µm, the single GTF exhibits a thermal conductivity of 745 W m −1 K −1 and excellent thermal shock resistance without interfacial failure, ensuring its durability for long‐term service in extreme conditions. Moreover, GTF woven exhibits excellent ablation resistance. The mass ablation rate is as low as 0.3 mg s −1 after exposure to oxyhydrogen flame at 2200°C. The excellent performance is attributed to the intrinsic high thermal conductivity of GF for rapid thermal dissipation and the full‐scale fractal‐like interlocking interfaces between the GF and carbide coating for sustaining local interface stress. This work paves the way for GF/ceramic composites as next‐generation dredging thermal protection materials to satisfy extreme heat flux management and structural integrity.


  • Scalable High‐Performance Graphene Films Over Hundreds Micrometer Thickness via Sheargraphy

    by Min Cao, Senping Liu, Jiahao Lu, Zhenheng Sun, Yue Gao, Hang Li, Kaiwen Li, Ge Wang, Haiwen Lai, Peidong Fan, et al.

    High‐performance graphene films with hundreds of micron thicknesses are promising to solve severe thermal management demands owing to higher heat‐carrying capacity. However, thick graphene films exhibit limited thermal conductivity below 1000 W m−1 K−1, caused by internal wrinkle defects of sheets. Here, a sheargraphy strategy is proposed to precisely regulate the sheet arrangement of liquid crystals and achieve the 215 µm thick graphene films with a record in‐plane thermal conductivity of 1380 W m−1 K−1. Microscale shearing fields of 5 µm generated by horizontally moved wire array flatten sheet wrinkles and eliminate polycrystallinity of graphene oxide liquid crystals. The uniform liquid crystals impart condensed solid films with high ordering, thereby forming densified and flat stacked graphitic crystallites. The highest thermal flux, defined as thickness multiplied by thermal conductivity, reaches up to 0.3 W K−1, endowing thick film with long‐distance rapid heat spreading capability and designability for heat transfer pathways. This work provides a valid methodology to regulate the ordering of 2D sheets and produce high heat‐flux graphene films to solve growing thermal management challenges.


  • Low‐Concentration Hydrogel Polyelectrolyte with In Situ Formed Interphases Enables 2.7 V Aqueous Pouch Cell

    by Tianfeng Qin, Kaiwen Li, Yingjun Liu, Zhen Xu, Chao Gao

    To maximize energy output, aqueous zinc‐based batteries are pushed to extreme potentials far beyond thermodynamic stability limit of aqueous electrolytes. Interphases at interfaces of electrodes/electrolytes are needed to make aqueous batteries stable and reversible kinetically. The absence of interphases at interfaces of hydrogel/electrodes severely impedes aqueous batteries operating in extreme potentials, although low‐concentration hydrogels are regarded as promising polyelectrolytes. Herein, a type of initiator system as cross‐linking agent is developed that makes hydrogel polyelectrolyte spontaneously in situ form interphases at 25 °C and darkness. This widens the electrochemical stability window of hydrogel polyelectrolyte to above 3.5 V. Also, the initiator system makes the designed hydrogel become a single ion conductor, increasing ionic conductivity to ≈280 mS cm−1. This hydrogel pushes a zinc//LiMn2O4 pouch cell to operate stably in a voltage window of 0.2 to 2.7 V and deliver high energy densities (e.g., 471 Wh kgLiMn2O4−1 at 2.2 mgLiMn2O4 cm−2; 203 Wh kgLiMn2O4−1, 7.1 mgLiMn2O4 cm−2) and excellent rate capabilities (e.g., 410 mAh g−1 at 0.11 C, 50 mAh g−1 at 57 C, 2.2 mgLiMn2O4 cm−2; 175 mAh g−1 at 0.7 C, 70 mAh g−1 at 7.5 C, and 7.1 mgLiMn2O4 cm−2).


  • Top Cited Papers

    Vertical Array of Graphite Oxide Liquid Crystal by Microwire Shearing for Highly Thermally Conductive Composites

    by Min Cao, Zheng Li, Jiahao Lu, Bo Wang, Haiwen Lai, Zeshen Li, Yue Gao, Xin Ming, Shiyu Luo, Li Peng, et al.

    Excellent through‐plane thermally conductive composites are highly demanded for efficient heat dissipation. Giant sheets have large crystalline domain and significantly reduce interface phonon scattering, making them promising to build highly thermally conductive composites. However, realizing vertical orientation of giant sheets remains challenging due to their enormous mass and huge hydrodynamic drag force. Here, we achieve highly vertically ordered liquid crystals of giant graphite oxide (more than 100 µm in lateral dimension) by microwire shearing, which endows the composite with a recorded through‐plane thermal conductivity of 94 W m−1 K−1. Microscale shearing fields induced by vertical motion of microwires conquer huge hydrodynamic energy barrier and vertically reorient giant sheets. The resulting liquid crystals exhibit extremely retarded relaxation and impart large‐scale vertical array with bidirectional ordering degree as high as 0.82. The graphite array‐based composites demonstrate an ultrahigh thermal enhancement efficiency of over 35 times per unit volume. Furthermore, the composites improve cooling efficiency by 93% for thermal management tests compared to commercial thermal interface materials. This work offers a novel methodology to precisely manipulate the orientation of giant particles and promote large‐scale fabrication of vertical array with advanced functionalities.


  • Top Cited Papers

    A Review on Graphene‐Based Electromagnetic Functional Materials: Electromagnetic Wave Shielding and Absorption

    by Yuxing Xia, Weiwei Gao, Chao Gao

    Electromagnetic (EM) functional materials play an increasingly important role in solving EM wave pollution in both modern military and civil fields. Graphene‐based materials are the most promising candidates in the applications of EM wave shielding and absorption owing to their remarkable structures and enhanced EM properties. Designing graphene‐based materials with elaborately controlled microstructures and optimized EM properties can effectively improve EM energy attenuation and conversion. Herein, the study begins with the EM attenuation mechanism, and multiscale design strategies of graphene‐based EM functional materials are outlined, including molecular‐scale, micro/nanoscale structure, macroscale structure, and integration of multiscale assembly design strategies. Applications in the EM wave shielding and absorption fields are reviewed, focusing on the latest advances in graphene‐based assemblies such as films, fabrics, and composites. Finally, the current challenges and future directions in this fast‐growing field are predicted.


  • 2D‐Topology‐Seeded Graphitization for Highly Thermally Conductive Carbon Fibers

    by Xin Ming, Anran Wei, Yingjun Liu, Li Peng, Peng Li, Jiaqing Wang, Senping Liu, Wenzhang Fang, Ziqiu Wang, Huanqin Peng, et al.

    Highly thermally conductive carbon fibers (CFs) have become an important material to meet the increasing demand for efficient heat dissipation. To date, high thermal conductivity has been only achieved in specific pitch‐based CFs with high crystallinity. However, obtaining high graphitic crystallinity and high thermal conductivity beyond pitch‐CFs remains a grand challenge. Here, a 2D‐topology‐seeded graphitization method is presented to mediate the topological incompatibility in graphitization by seeding 2D graphene oxide (GO) sheets into the polyacrylonitrile (PAN) precursor. Strong mechanical strength and high thermal conductivity up to 850 W m−1 K−1 are simultaneously realized, which are one order of magnitude higher in conductivity than commercial PAN‐based CFs. The self‐oxidation and seeded graphitization effect generate large crystallite size and high orientation to far exceed those of conventional CFs. Topologically seeded graphitization, verified in experiments and simulations, allows conversion of the non‐graphitizable into graphitizable materials by incorporating 2D seeds. This method extends the preparation of highly thermally conductive CFs, which has great potential for lightweight thermal‐management materials.


  • Multifunctional Macroassembled Graphene Nanofilms with High Crystallinity

    by Li Peng, Ying Han, Meihui Wang, Xiaoxue Cao, Junfeng Gao, Yingjun Liu, Xianjue Chen, Bin Wang, Bo Wang, Chongyang Zhu, et al.

    A “cooling–contraction” method to separate large‐area (up to 4.2 cm in lateral size) graphene oxide (GO)‐assembled films (of nanoscale thickness) from substrates is reported. Heat treatment at 3000 °C of such free‐standing macroscale films yields highly crystalline “macroassembled graphene nanofilms” (nMAGs) with 16–48 nm thickness. These nMAGs present tensile strength of 5.5–11.3 GPa (with ≈3 µm gauge length), electrical conductivity of 1.8–2.1 MS m−1, thermal conductivity of 2027–2820 W m−1 K−1, and carrier relaxation time up to ≈23 ps. As a demonstration application, an nMAG‐based sound‐generator shows a 30 µs response and sound pressure level of 89 dB at 1 W cm−2. A THz metasurface fabricated from nMAG has a light response of 8.2% for 0.159 W mm−2 and can detect down to 0.01 ppm of glucose. The approach provides a straightforward way to form highly crystallized graphene nanofilms from low‐cost GO sheets.


  • Hydroplastic Micromolding of 2D Sheets

    by Fan Guo, Yue Wang, Yanqiu Jiang, Zeshen Li, Zhen Xu, Xiaoli Zhao, Tingbiao Guo, Wei Jiang, Chao Gao

    Processing 2D sheets into desired structures with high precision is of great importance for fabrication and application of their assemblies. Solution processing of 2D sheets from dilute dispersions is a commonly used method but offers limited control over feature size precision owing to the extreme volume shrinkage. Plastic processing from the solid state is therefore a preferable approach to achieve high precision. However, plastic processing is intrinsically hampered by strong interlayer interactions of the 2D sheet solids. Here, a hydroplastic molding method to shape layered solids of 2D sheets with micrometer‐scale precision under ambient conditions is reported. The dried 2D layered solids are plasticized by intercalated solvents, affording plastic near‐solid compounds that enable local plastic deformation. Such an intercalated solvent‐induced hydroplasticity is found in a broad family of 2D materials, for example graphene, MoS2, and MXene. The hydroplastic molding enables fabrication of complex spatial structures (knurling, origami) and microimprinted tubular structures down to diameters of 390 nm with good fidelity. The method enhances the structural accuracy and enriches the structural diversity of 2D macroassemblies, thus providing a feasible strategy to tune their electrical, optical, and other functional properties.


  • Highly Crystalline Graphene Fibers with Superior Strength and Conductivities by Plasticization Spinning

    by Peng Li, Yingjun Liu, Shaoyi Shi, Zhen Xu, Weigang Ma, Ziqiu Wang, Senping Liu, Chao Gao

    Graphene fiber (GF), a macroscopic one‐dimensional assembly of individual graphene sheets, promises both extraordinary mechanical performance and superior multifunctionality. However, the properties of graphene fiber are still limited due to the unfavorable crystalline structures, especially induced by wrinkled conformations of graphene. A plasticization spinning strategy is presented to achieve GF with both high mechanical strength and electrical/thermal conductivity. Adjusting the interlayer space from 1.2 to 1.8 nm by intercalating proper plasticizers to adjacent graphene oxide sheets enables graphene oxide fibers to achieve a 580% enhanced deformable plasticity. Such a plasticization spinning flattens random graphene wrinkles, and regulates sheets with high order and stacking density, thereby forming large crystallite domains. The GF exhibits all around record performance including mechanical strength (3.4 GPa), electrical conductivity (1.19 × 106 S m−1), and thermal conductivity (1480 W m−1 K−1). The optimally crystalline GF with the integration of benchmark overall properties and scalable fabrication is likely to be attractive and competitive in future industrial applications.


  • Dynamic dispersion stability of graphene oxide with metal ions

    by Yinghui He, Yingjun Liu, Fan Guo, Kai Pang, Bo Fang, Ya Wang, Dan Chang, Zhen Xu, Chao Gao