Danyang Lin

Danyang Lin

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Danyang Lin has a total of 22 co-authors. Here are the top co-authors by number of shared publications:

  • Xiaoguo Song

    State Key Laboratory of Precision Welding & Joining of Materials and Structures, Harbin Institute of Technology, Harbin 150001, China

    2 shared publications
  • Caiwang Tan

    College of Materials Science and Engineering, Harbin Institute of Technology, Harbin, China

    1 shared publication
  • Fuyun Liu

    College of Materials Science and Engineering, Harbin Institute of Technology, Harbin, China

    1 shared publication
  • Hongbing Liu

    School of Materials Science and Engineering, Shanghai University of Engineering Science, Shanghai 201620, China

    1 shared publication
  • Honglei Tian

    CRRC Qingdao Sifang Locomotive and Rolling Stock Co., Ltd. Technical Engineering Department, Qingdao, China

    1 shared publication
  • Jiahui Zhou

    College of Materials Science and Engineering, Harbin Institute of Technology, Harbin, China

    1 shared publication

Latest Publications

  • The Effect of Laser Oscillation Frequency on the Microstructure and Properties of a Novel Low-Density Aluminum Alloy in Laser-Cold Metal Transfer Hybrid Welded Joints

    by Jiahui Zhou, Zhiqiang Zhang, Zeyu Zhang, Honglei Tian, Jianjun Wang, Zhongxuan Xu, Fuyun Liu, Caiwang Tan, Xiaoguo Song, Danyang Lin

  • Open Access

    Weldability Improvement of Additively Manufactured Nickel-Based Superalloy by Controlling W and Si Migration at Solidification Front

    by Rui Ma, Xin Xi, Zhaoyang Lin, Wenrui Luo, Yanhao Hou, Wenjun Zhao, Zhifeng Shi, Xiaoguo Song, Qiang Chen, Danyang Lin

    Nickel-based superalloy components prepared by laser powder bed fusion (LPBF) are increasingly being used in the hot ends of aeroengines, which still need to be laser-welded to realize the assembly connection of large closed structures. However, the unique microstructural characteristics of LPBFed parts render them more poorly weldable than casts and wroughts, especially in cracking-sensitive superalloys. In this study, cracking mechanisms were analyzed by performing laser deep fusion welding on an LPBFed Haynes 230 alloy. The key factors leading to weld cracking were strongly correlated with the low-melting-point TCP phases enriched with W, Si, Al, and silicides, both of which tended to be distributed in the boron(B)-rich region and exhibited poor coherence with the matrix. In addition, the flow behavior of the molten pool affected the solidification rate of the weld, resulting in large solidification shrinkage stresses in the cracking-sensitive zone (CZ) part of the weld. In order to minimize the development conditions of the cracking-sensitive phases, reducing the content of W (from 14.96 to 13.56 wt.%) and Si (from 0.47 to 0.25 wt.%) was chosen to alleviate the segregation of W, Si and C elements in the solid phase at the end of solidification. Thus, TCP phase and silicides were transformed into carbides, which successfully suppressed weld cracking, reducing the crack depth ratio from 0.70 ± 0.08 to zero. New insights into the weldability improvement and crack inhibition mechanism of laser-welded additively manufactured cracking-sensitive superalloys are provided, accelerating the rapid application of large assemblies.

  • Open Access

    Microstructural Evolution and Mechanical Properties of Ti2AlNb/GH99 Superalloy Brazed Joints Using TiZrCuNi Amorphous Filler Alloy

    by Junjie Cai, Shengpeng Hu, Hongbing Liu, Danyang Lin, Wei Fu, Xiaoguo Song

    Dissimilar materials brazing of Ti2AlNb alloy to GH99 superalloy is of great pragmatic importance in the aerospace field, especially the lightweight space aircraft components manufacturing. In this work, TiZrCuNi amorphous filler alloy was used as brazing filler, and experiments were carried out at different brazing temperatures and times to investigate the changes in interfacial structures and properties of the joints. The typical interfacial microstructure was Ti2AlNb alloy/B2/β/Ti2Ni (Al, Nb) + B2/β + (Ti, Zr)2(Ni, Cu) + (Ti, Zr)(Ni, Cu)/(Cr, Ni, Ti) solid solution + (Ni, Cr) solid solution/GH99 superalloy when being brazed at 1000 °C for 8 min. The interfacial microstructure of the joints was influenced by diffusion and reaction between the filler alloy and the parent metal. The prolongation of brazing process parameters accelerated the diffusion and reaction of the liquid brazing alloy into both parent metals, which eventually led to the aggregation of (Ti, Zr)2(Ni, Cu) brittle phase and increased thickness of Ti2Ni (Al, Nb) layer. According to fracture analyses, cracks began in the Ti2Ni (Al, Nb) phase and spread with it as well as the (Ti, Zr)2(Ni, Cu) phase. The joints that were brazed at 1000 °C for 8 min had a maximum shear strength of ~216.2 MPa. Furthermore, increasing the brazing temperature or extending the holding time decreased the shear strength due to the coarse Ti2Ni (Al, Nb) phase and the continuous (Ti, Zr)2(Ni, Cu) phase.