Zhenhao Ji
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Zhenhao Ji has a total of 20 co-authors. Here are the top co-authors by number of shared publications:
- Xiaohu You
Southeast University
7 shared publications - Chuan Zhang
LEADS, the National Mobile Communications Research Laboratory, and the Frontiers Science Center for Mobile Information Communication and Security, Southeast University, Nanjing, China
6 shared publications - Xiaosi Tan
LEADS, the National Mobile Communications Research Laboratory, and the Frontiers Science Center for Mobile Information Communication and Security, Southeast University, Nanjing, China
4 shared publications - Zaichen Zhang
National Mobile Communications Research Laboratory, Frontiers Science Center for Mobile Information Communication and Security, Southeast University, Nanjing, China
4 shared publications - Yingmeng Ge
LEADS, the National Mobile Communications Research Laboratory, and the Frontiers Science Center for Mobile Information Communication and Security, Southeast University, Nanjing, China
3 shared publications - Yongming Huang
National Mobile Communications Research Laboratory, Southeast University, Nanjing, China
2 shared publications
Latest Publications
- 14 March 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems I: Regular Papers
- Vol. 71 (6) , 2938-2950
Approximate Belief-Selective Propagation Detector for Massive MIMO Systems
When faced with challenging antenna configurations or high-order modulations in realistic propagation environments, the Belief Propagation (BP) MIMO detector outperforms its linear counterparts. To mitigate the error floor issue and lower the complexity, a revised BP detector, named the Belief-selective Propagation (BsP) detector, has recently emerged by selectively utilizing trusted incoming messages for updates. Despite those promising potentials, the straightforward hardware implementation of the BsP detector still suffers from high complexity and necessitates further optimization. To bridge the gap between the BsP algorithm and implementation, this paper introduces an approximate but implementation-friendly BsP detector called aBsP, based on which the very first BsP hardware is proposed. Two unexplored features: approximate initialization and simplified message updates save the complexity (more than $84$ %) with acceptable performance penalization. Multi-level optimization techniques involving group-layered message updating, approximate arithmetic circuits, and hybrid-precise quantization are developed to boost the hardware efficiency A $128\times 8$ $256$ -QAM aBsP MIMO detector ASIC in $40$ nm CMOS occupies an area of $0.68$ mm $^2$ and reaches a throughput of $790.52$ Mbps. Benchmarking with the recent arts, this work achieves $1.08\times$ area efficiency and $3.34\times$ gate efficiency.
- 14 March 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems I: Regular Papers
- Vol. 71 (6) , 2938-2950
Approximate Belief-Selective Propagation Detector for Massive MIMO Systems
When faced with challenging antenna configurations or high-order modulations in realistic propagation environments, the Belief Propagation (BP) MIMO detector outperforms its linear counterparts. To mitigate the error floor issue and lower the complexity, a revised BP detector, named the Belief-selective Propagation (BsP) detector, has recently emerged by selectively utilizing trusted incoming messages for updates. Despite those promising potentials, the straightforward hardware implementation of the BsP detector still suffers from high complexity and necessitates further optimization. To bridge the gap between the BsP algorithm and implementation, this paper introduces an approximate but implementation-friendly BsP detector called aBsP, based on which the very first BsP hardware is proposed. Two unexplored features: approximate initialization and simplified message updates save the complexity (more than $84$ %) with acceptable performance penalization. Multi-level optimization techniques involving group-layered message updating, approximate arithmetic circuits, and hybrid-precise quantization are developed to boost the hardware efficiency A $128\times 8$ $256$ -QAM aBsP MIMO detector ASIC in $40$ nm CMOS occupies an area of $0.68$ mm $^2$ and reaches a throughput of $790.52$ Mbps. Benchmarking with the recent arts, this work achieves $1.08\times$ area efficiency and $3.34\times$ gate efficiency.
- 15 February 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Vehicular Technology
- Vol. 73 (7) , 10767-10771
A Deep-Learning-Aided Message Passing Detector for MIMO SC-FDMA
In this paper, a multiple-input multiple-output (MIMO) single carrier frequency division multiple access (SC-FDMA) detector is proposed, named simplified generalized approximate message passing (Sim-GAMP), which is derived from the existing low-complexity GAMP (LC-GAMP). To improve its BER performance, Sim-GAMP is further developed by means of deep learning (DL) techniques, which is called DL-GAMP in this work. Specifically, the layers of DL-GAMP are constructed by unfolding iterations of Sim-GAMP and introducing learnable parameters, thus contributing to better BER performance. Numerical results demonstrate that DL-GAMP can mitigate the performance loss of Sim-GAMP and present good robustness in mismatched cases. Compared with state-of-the-art (SOA) MIMO SC-FDMA detectors, the proposed DL-GAMP enjoys advances in both BER performance (up to $\mathbf {0.83}$ dB gain at BER $=\mathbf {10^{-3}}$ ) and computational complexity ( $\mathbf {66.44}$ % reduction at most).
- 15 February 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Vehicular Technology
- Vol. 73 (7) , 10767-10771
A Deep-Learning-Aided Message Passing Detector for MIMO SC-FDMA
In this paper, a multiple-input multiple-output (MIMO) single carrier frequency division multiple access (SC-FDMA) detector is proposed, named simplified generalized approximate message passing (Sim-GAMP), which is derived from the existing low-complexity GAMP (LC-GAMP). To improve its BER performance, Sim-GAMP is further developed by means of deep learning (DL) techniques, which is called DL-GAMP in this work. Specifically, the layers of DL-GAMP are constructed by unfolding iterations of Sim-GAMP and introducing learnable parameters, thus contributing to better BER performance. Numerical results demonstrate that DL-GAMP can mitigate the performance loss of Sim-GAMP and present good robustness in mismatched cases. Compared with state-of-the-art (SOA) MIMO SC-FDMA detectors, the proposed DL-GAMP enjoys advances in both BER performance (up to $\mathbf {0.83}$ dB gain at BER $=\mathbf {10^{-3}}$ ) and computational complexity ( $\mathbf {66.44}$ % reduction at most).
- 15 February 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems II: Express Briefs
- Vol. 71 (7) , 3348-3352
Flexible High-Level Synthesis Library for Linear Transformations
Despite decades pursuing efficient hardware design for signal processing based on linear algebra, traditional hardware description languages (HDLs)-based design workflows remain challenging and time-consuming. High-level synthesis (HLS) provides an easier approach but still requires thorough designs of basic modules concerning linear transformations to achieve acceptable hardware efficiency. To simplify the HLS workflow, we propose the FLAMES library, which provides efficient ready-to-use linear transformation modules. Users can implement algorithms with significantly higher code-writing efficiency via the FLAMES library. We demonstrate its effectiveness by implementing the orthogonal matching pursuit list (OMPL) algorithm for compressed sensing in FPGA, achieving 1.56× and 1.12× throughput/slice compared with traditional HLS for the sequential and parallel architecture, respectively.
- 15 February 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems II: Express Briefs
- Vol. 71 (7) , 3348-3352
Flexible High-Level Synthesis Library for Linear Transformations
Despite decades pursuing efficient hardware design for signal processing based on linear algebra, traditional hardware description languages (HDLs)-based design workflows remain challenging and time-consuming. High-level synthesis (HLS) provides an easier approach but still requires thorough designs of basic modules concerning linear transformations to achieve acceptable hardware efficiency. To simplify the HLS workflow, we propose the FLAMES library, which provides efficient ready-to-use linear transformation modules. Users can implement algorithms with significantly higher code-writing efficiency via the FLAMES library. We demonstrate its effectiveness by implementing the orthogonal matching pursuit list (OMPL) algorithm for compressed sensing in FPGA, achieving 1.56× and 1.12× throughput/slice compared with traditional HLS for the sequential and parallel architecture, respectively.
- 31 August 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Vehicular Technology
- Vol. 73 (4) , 4801-4813
Approximate Message Passing MIMO Detector With Frequency Domain Initialization for SC-FDMA
In this paper, multiple-input multiple-output (MIMO) single-carrier frequency division multiple access (SC-FDMA) detection algorithms, including low-complexity approximate message passing (LC-AMP) and frequency domain initialization (FDI) benefitted LC-AMP (FDI-LC-AMP), are proposed. The detailed derivation of LC-AMP algorithm starting from approximate message passing (AMP) is provided. Adaptive nearest-neighbor approximation (ANNA) and modified message damping strategy are illustrated. Additionally, FDI is adopted to improve the convergence performance of LC-AMP. The simulation results show that the proposed LC-AMP/FDI-LC-AMP with ANNA exhibit superior performance compared to other state-of-the-art (SOA) MIMO SC-FDMA detectors with and without channel encoding. The trade-off between complexity and performance is also discussed. Benefitting from FDI and ANNA, FDI-LC-AMP with ANNA can obtain 22.9%-44.0% reduction in complexity compared to the SOAs while performing better.
- 31 August 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Vehicular Technology
- Vol. 73 (4) , 4801-4813
Approximate Message Passing MIMO Detector With Frequency Domain Initialization for SC-FDMA
In this paper, multiple-input multiple-output (MIMO) single-carrier frequency division multiple access (SC-FDMA) detection algorithms, including low-complexity approximate message passing (LC-AMP) and frequency domain initialization (FDI) benefitted LC-AMP (FDI-LC-AMP), are proposed. The detailed derivation of LC-AMP algorithm starting from approximate message passing (AMP) is provided. Adaptive nearest-neighbor approximation (ANNA) and modified message damping strategy are illustrated. Additionally, FDI is adopted to improve the convergence performance of LC-AMP. The simulation results show that the proposed LC-AMP/FDI-LC-AMP with ANNA exhibit superior performance compared to other state-of-the-art (SOA) MIMO SC-FDMA detectors with and without channel encoding. The trade-off between complexity and performance is also discussed. Benefitting from FDI and ANNA, FDI-LC-AMP with ANNA can obtain 22.9%-44.0% reduction in complexity compared to the SOAs while performing better.
- 22 August 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Vehicular Technology
- Vol. 73 (1) , 1353-1357
An Improved Power Expectation Propagation Detector for Massive MIMO Systems
Expectation propagation (EP) achieves promising performance under various antenna configurations and modulations in massive multiple-input multiple-output (MIMO) detection. Among existing EP variants, the improved EP (IEP) achieves the best bit-error-rate (BER) performance, but at the expense of slower convergence rate. In this correspondence, a novel power EP (PEP) detector is proposed to further enhance the efficiency of EP by balancing the convergence rate and BER performance with two variance-control factors derived from minimizing the $\alpha$ -divergence in the moment matching. Numerical simulation results are illustrated to show that the proposed PEP can outperform state-of-the-art EP-based detectors in various MIMO scenarios.
- 22 August 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Vehicular Technology
- Vol. 73 (1) , 1353-1357
An Improved Power Expectation Propagation Detector for Massive MIMO Systems
Expectation propagation (EP) achieves promising performance under various antenna configurations and modulations in massive multiple-input multiple-output (MIMO) detection. Among existing EP variants, the improved EP (IEP) achieves the best bit-error-rate (BER) performance, but at the expense of slower convergence rate. In this correspondence, a novel power EP (PEP) detector is proposed to further enhance the efficiency of EP by balancing the convergence rate and BER performance with two variance-control factors derived from minimizing the $\alpha$ -divergence in the moment matching. Numerical simulation results are illustrated to show that the proposed PEP can outperform state-of-the-art EP-based detectors in various MIMO scenarios.
- 2 March 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Signal Processing
- Vol. 71 (1053587X) , 1039-1052
Automatic Hybrid-Precision Quantization for MIMO Detectors
In the design of wireless systems, quantization plays a critical role in hardware, which directly affects both area efficiency and energy efficiency. Being an enabling technique, the wide applications of multiple-input multiple-output (MIMO) heavily rely on efficient implementations balancing both performance and complexity. However, most of the existing detectors quantize all variables in a uniform way, resulting in high redundancy and low flexibility. Requiring both expertise and efforts, an in-depth tailored quantization usually asks for prohibitive costs and is not considered by conventional MIMO detectors. In this paper, a general framework named the automatic hybrid-precision quantization (AHPQ) is proposed with two parts: integral part quantization (IPQ) determined by probability density function (PDF), and fractional part quantization (FPQ) by deep reinforcement learning (DRL). Being automatic, AHPQ demonstrates high efficiency in figuring out good quantizations for a set of algorithmic parameters. For the approximate message passing (AMP) detector, AHPQ achieves up to $57.8\%$ lower average bitwidth than the unified quantization (UQ) one with almost no performance sacrifice. The feasibility of AHPQ has been verified by implementation with 65 nm CMOS technology. Compared with its UQ counterpart, AHPQ exhibits $2.97\times$ higher throughput-to-area ratio (TAR) with $19.3\%$ lower energy dissipation. Moreover, by node compression and strength reduction, the AHPQ-guided detector outperforms the state-of-the-art (SOA) in both throughput (17.92 Gb/s) and energy efficiency (7.93 pJ/b). The proposed AHPQ framework is also applicable for other digital signal processing (DSP) algorithms.
- 2 March 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Signal Processing
- Vol. 71 (1053587X) , 1039-1052
Automatic Hybrid-Precision Quantization for MIMO Detectors
In the design of wireless systems, quantization plays a critical role in hardware, which directly affects both area efficiency and energy efficiency. Being an enabling technique, the wide applications of multiple-input multiple-output (MIMO) heavily rely on efficient implementations balancing both performance and complexity. However, most of the existing detectors quantize all variables in a uniform way, resulting in high redundancy and low flexibility. Requiring both expertise and efforts, an in-depth tailored quantization usually asks for prohibitive costs and is not considered by conventional MIMO detectors. In this paper, a general framework named the automatic hybrid-precision quantization (AHPQ) is proposed with two parts: integral part quantization (IPQ) determined by probability density function (PDF), and fractional part quantization (FPQ) by deep reinforcement learning (DRL). Being automatic, AHPQ demonstrates high efficiency in figuring out good quantizations for a set of algorithmic parameters. For the approximate message passing (AMP) detector, AHPQ achieves up to $57.8\%$ lower average bitwidth than the unified quantization (UQ) one with almost no performance sacrifice. The feasibility of AHPQ has been verified by implementation with 65 nm CMOS technology. Compared with its UQ counterpart, AHPQ exhibits $2.97\times$ higher throughput-to-area ratio (TAR) with $19.3\%$ lower energy dissipation. Moreover, by node compression and strength reduction, the AHPQ-guided detector outperforms the state-of-the-art (SOA) in both throughput (17.92 Gb/s) and energy efficiency (7.93 pJ/b). The proposed AHPQ framework is also applicable for other digital signal processing (DSP) algorithms.
- 9 January 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Systems Journal
- Vol. 17 (2) , 2628-2639
Performance Analysis and Optimization of Network-Assisted Full-Duplex Systems Under Low-Resolution ADCs
Network-assisted full-duplex (NAFD) distributed massive multiple-input–multiple-output (M-MIMO) enables the in-band full-duplex with existing half-duplex devices at the network level, which exceptionally improves spectral efficiency. This article analyzes the impact of low-resolution analog-to-digital converters (ADCs) on NAFD distributed M-MIMO and designs an efficient bit allocation algorithm for low-resolution ADCs. The beamforming training mechanism relieves the heavy pilot overhead for channel estimation, which remarkably enhances the system performance by guiding the interference cancellation and coherence detection. Furthermore, closed-form expressions for spectral and energy efficiency with low-resolution ADCs are derived. The multiobjective optimization problem for spectral and energy efficiency is solved by the deep Q network and the nondominated sorting genetic algorithm II. The simulation results corroborate the theoretical derivation and verify the effectiveness of introducing low-resolution ADCs in NAFD distributed M-MIMO systems. Meanwhile, a set of Pareto-optimal solutions for ADC accuracy flexibly provide guidelines for deploying in a practical NAFD distributed M-MIMO system.
- 9 January 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Systems Journal
- Vol. 17 (2) , 2628-2639
Performance Analysis and Optimization of Network-Assisted Full-Duplex Systems Under Low-Resolution ADCs
Network-assisted full-duplex (NAFD) distributed massive multiple-input–multiple-output (M-MIMO) enables the in-band full-duplex with existing half-duplex devices at the network level, which exceptionally improves spectral efficiency. This article analyzes the impact of low-resolution analog-to-digital converters (ADCs) on NAFD distributed M-MIMO and designs an efficient bit allocation algorithm for low-resolution ADCs. The beamforming training mechanism relieves the heavy pilot overhead for channel estimation, which remarkably enhances the system performance by guiding the interference cancellation and coherence detection. Furthermore, closed-form expressions for spectral and energy efficiency with low-resolution ADCs are derived. The multiobjective optimization problem for spectral and energy efficiency is solved by the deep Q network and the nondominated sorting genetic algorithm II. The simulation results corroborate the theoretical derivation and verify the effectiveness of introducing low-resolution ADCs in NAFD distributed M-MIMO systems. Meanwhile, a set of Pareto-optimal solutions for ADC accuracy flexibly provide guidelines for deploying in a practical NAFD distributed M-MIMO system.