XZXiao Zhang

Xiao Zhang

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Xiao Zhang has a total of 8 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Study on the Bending Performance of High-Strength and High-Ductility CRE-Reinforced Concrete Beams

    by Xiao Zhang, Youkun Sun, Xiaoxia Yang, Lele Sun, Peijun Wang

    Constant resistance energy (CRE) steel reinforcement has a yield strength of up to 750 MPa and an ultimate elongation of more than 20%. CRE reinforcement overcomes the contradiction between high yield strength and high uniform elongation of ordinary high-strength bars. This paper explores the flexural performance and load-carrying mechanisms of CRE-reinforced concrete beams through a series of experiments, while also presenting a theoretical analytical method for such specimens. Flexural tests on six CRE-reinforced concrete beams and two control tests on hot-rolled ribbed bar 400 (HRB400)-reinforced concrete beams were conducted in this paper. The study examines the influence of the shear–span ratio and reinforcement type on the mechanical response of the beams, including cracking load, yield load, and ultimate load, while analyzing the variation patterns of concrete strain and reinforcement strain. The experimental results demonstrate that as the shear–span ratio decreases, the crack resistance and load-carrying capacity of CRE-reinforced concrete beams improve. Under equivalent conditions, CRE-reinforced concrete beams exhibit higher load-carrying capacity compared to HRB-reinforced concrete beams, surpassing the latter by approximately 43% in terms of ultimate load. Additionally, this paper proposes a calculation method for the mechanical response of NPR-reinforced concrete beams and compares the theoretical values with the experimental values. The differences between the two are within 13%, which proves the reliability of the calculation method.


  • Open Access

    Research on Seismic Performance of 735 MPa High-Strength Reinforced Concrete Frame Joints

    by Xiao Zhang, Fei Han, Xuekun Wang, Lele Sun, Qi Wang, Peijun Wang

    To study the seismic performance of high-strength reinforced concrete frame joints, cyclic loading tests were carried out on six concrete beam-column joints configured with the new Cold-rolled Ribbed Bar (CRB) 735 high-strength steel reinforcement and one joint with Hot-rolled Ribbed Bar (HRB) 400 ordinary steel reinforcement to obtain the effects of the axial compression ratio and the stirrup ratio in the joint core on the seismic performance of the joints. The test results show that the following: (1) Increasing the axial compression ratio can improve the energy dissipation characteristics of the joints configured with CRB735, but cannot effectively improve the ultimate shear capacity of the joints. Larger axial compression ratio will cause earlier cracks in the core area and reduce the ductility of the specimens by 6.1~27.9%. (2) Increasing the stirrup ratio in the joint core will increase the shear capacity of the joint by 5.3~8.1% while also increasing the failure displacement by 2.8~14.9%. (3) When the joints are configured with CRB735 stirrups, the rate of stiffness degradation from core cracking to the yielding stage of the specimens will be effectively delayed. (4) Compared with the joint configured with HRB400, the ultimate loading process of the joints using CRB735 is shorter, the yield load and yield displacement are higher, and the specimens are close to the ultimate state when they reach yield. Finally, the shear capacity of concrete beam-column joints configured with CRB735 can be calculated using the relevant shear capacity equation in GB50010-2010 Code for Design of Concrete Structures, and has a certain safety reserve. In the equation, the yield strength of CRB735 steel reinforcement is recommended to be 735 MPa.


  • Open Access

    Study on Eccentric Compressive Behavior of Concrete Columns Reinforced with NPR735 High-Strength Steel Bars

    by Xiao Zhang, Yijing Ding, Xuekun Wang, Lele Sun

    In this paper, eccentric compressive tests and theoretical studies of grade 735 MPa reinforced concrete columns were conducted. The eccentric distance and strength of the longitudinal reinforcement were used as experimental parameters to investigate the bearing capacity, failure mode, and strength of eccentric compressive behavior of NPR735 high-strength steel bars. When the load eccentricity of the reinforced concrete columns was small or longitudinal, the reinforcement ratio was large, and small eccentricity failure occurred. The results were similar to the failure mode of ordinary concrete columns with traditional steel bars. When the load eccentricity decreased, the bearing capacity increased, but the deflection and ductility of the specimen decreased. When the strength of the longitudinal reinforcement increased, the bearing capacity of the specimen increased slightly. Finally, according to current design methods in the concrete structure design code, the bearing capacity of the eccentric compressive column was obtained, and the calculated results were compared with the experimental results to verify the applicability of the concrete structure design code GB50010-2010 to concrete columns with grade 735 MPa reinforcement.