XZXin Zhang

Xin Zhang

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Xin Zhang has a total of 95 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Reconfigurable Optoelectronic Logic Gates Enabled by a VSe2/MoTe2 van der Waals Heterojunction

    by Kang Zhang, Wansong He, Ruya Cong, Xin Zhang, Jianzhi Gao, Yubing Tu, Suofu Wang, Mingsheng Long

    Optoelectronic logic gates that integrate optical inputs with electrical outputs offer a promising route toward high-bandwidth, low-power in-sensor computing. However, most existing implementations require precise control over the excitation wavelength, optical power, or gate bias, which complicates device fabrication and system integration. Here, we demonstrate a reconfigurable optoelectronic logic device based on a VSe2/MoTe2 van der Waals heterojunction. The device exhibits a rectification ratio exceeding 103 in the dark and a pronounced photovoltaic response, including a light on/off ratio surpassing 107, a responsivity of 0.28 A/W, and external quantum efficiency of 54%, as well as a noise-equivalent power of 4.6 × 10−14 W/Hz1/2 and a specific detectivity of 2.1 × 1010 cm Hz1/2/W. By reconfiguring the source and drain electrodes and modulating the optical input, six fundamental Boolean logic operations—AND, IMP, NOR, NOT, OR, and NAND—are realized in the device. Notably, all six logic functions are obtained under fixed illumination and predefined bias, without requiring wavelength, power, or gate modulation. Switching between functions requires only a specific bias voltage and a change in the source/drain connection (for certain operations, OR and NAND, the input state is redefined). These results underscore the promise of two-dimensional material-based van der Waals heterojunctions for compact, low-power, and reconfigurable optoelectronic logic processing.

  • Open Access

    Ultra-Broadband Negative Photoconductivity in a Van der Waals Ferromagnetic Metal FePd2Te2

    by Kang Zhang, Ruya Cong, Huixian Li, Feng Jiang, Tao Han, Xin Zhang, Jianzhi Gao, Yubing Tu, Suofu Wang, Mingsheng Long

    Negative photoconductivity (NPC) in low-dimensional materials has attracted considerable interest for its potential in novel optoelectronic devices. Here, we report an ultra-broadband NPC response in FePd2Te2, a van der Waals ferromagnet, spanning from visible to long-wavelength infrared at room temperature. The device achieves a responsivity of ~4.9 A/W and external quantum efficiency of ~240% at 2500 nm, with a noise-equivalent power (NEP) below 3.0 × 10−15 W/Hz1/2 and a specific detectivity (D*) exceeding 3.6 × 1011 cmHz1/2/W across the infrared range. Systematic measurements identify the photobolometric effect as the underlying mechanism, wherein wavelength-dependent absorption depths play a key role in shaping the photoresponse characteristics. These results establish FePd2Te2 as a promising platform for uncooled broadband infrared detection and highlight the potential of magnetic van der Waals materials for future optoelectronics.


  • Open Access

    Light-Driven On-Surface Synthesis: Mechanisms, Strategies, and Architectures

    by Yinghui Fu, Ying Han, Jiuan Gong, Jiahui Li, Yiwen Wang, Chao Yan, Rengang Wan, Xin Zhang, Jianzhi Gao

    Molecular on-surface photochemistry has emerged as a promising alternative to thermal activation for fabricating low-dimensional carbon-based nanomaterials, offering unique advantages such as non-thermal initiation and high chemoselectivity. Controlling the selectivity and efficiency of on-surface photoreactions remains challenging due to the complex interplay among molecular excitation pathways, substrate properties, and reaction conditions. This review briefly summarizes recent advances in light-driven on-surface synthesis under ultra-high-vacuum conditions. We focus on molecular photoexcitation pathways that can be probed by scanning tunneling microscopy and spectroscopy (STM and STS). Studies of light-driven reactions in three categories are overviewed, i.e., dehalogenative C-C coupling, [2+2] and [4+4] cycloadditions, and photoisomerization. Typical strategies for tuning reactivity are exemplified, including molecular pre-organization via self-assembly, surface passivation, and wavelength/polarization control. The summary of successful case studies may not only facilitate the fundamental understanding of on-surface photochemistry but also inspire the design of functional low-dimensional architectures and light-responsive molecular devices.

  • On-Surface Synthesis of Large-Scaled Kagome-Like Metal-Coordinated Framework and Polymerized Chains with Phenylacetylene on Cu(111) Surface

    by Xin Zhang, Mengyuan Liu, Xiaorui Chen, Xiaoyv Hou, Yang Song, Haoxuan Ding, Xinyue Wang, Hualin Yang, Bosheng Li, Xueting Xing, et al.

    Single-layer metal-organic framework (MOF) structures on solid surfaces, known as the surface MOF (SMOF), have attracted extensive interest in the past decade. However, preparing large-scale uniform and well-defined SMOF structures remains challenging. Herein, we used the phenylacetylene (PA) molecule as the building block to synthesize the two-dimensional (2D) Kagome-like SMOF, subsequently the cis-Cu-coordinated linear structure, and finally trans-polymerized chains on the Cu(111) surface. Characterized by cryogenic scanning tunneling microscopy (STM), noncontact atomic force microscopy (nc-AFM), and rationalized by first-principles calculations, the optimized structure and electronic bands of the Kagome-like SMOF, cis-coordinated linear structure, and polymerized chains were investigated. We clarified that the formation of the 2D Kagome-like SMOF is based on Cu-coordination reaction between the terminal acetylene group of PA molecules and the ortho-site of the phenyl ring, followed by self-assembly of PA-Cu-PA units on the Cu(111) surface. By further step-by-step postannealing, PA molecules undergo a series of surface reactions, transitioning to a well-defined Cu-coordinated cis-linear structure and finally developing into a trans-polymerized line structure. Our results demonstrate a stepwise approach for achieving linear polymerization by using surface metal coordination. Hybrid SMOF, linear coordinated chains, and linear polymer could lead to intriguing quantum states, giving rise to a variety of applications in future molecular devices.


  • Open Access

    Anisotropic Hierarchical Assembly of C 60 from One Dimensional to Three Dimensional via Thiolate‐Mediated van der Waals Epitaxy

    by Chao Yan, Yiwen Wang, Xueting Xing, Xin Zhang, Jiahui Li, Xiaorui Chen, Shu Yang, Cunxin Zhang, Rongqiang Li, Chuhan Zhang, et al.

    The anisotropic growth of C 60 is essential for engineering oriented electronic properties. This growth mode, however, is challenged by the strong thermodynamic drive of molecules forming close‐packed assemblies. This study demonstrates a thiolate‐mediated van der Waals (vdW) epitaxial strategy to construct C 60 anisotropic architectures with tunable dimensionality on Au(111). Using pentanethiol (PT) as a cohost species, we achieved precise structural control from 1D C 60 nanochains to 3D superstructures with an orthorhombic lattice. The directional diffusion of C 60 was engineered by controlling the assembly of PT molecules into striped or disordered phases. Striped PT template favors 1D growth of C 60 chains along the axis via anisotropic molecular channels, whereas disordered PT phase promotes the formation of 2D islands with rectangular lattices. The RS‐Au‐SR (R = CH 3 (CH 2 ) 4 SH) staple motifs act as quantized spacers and linkers between C 60 nanochains, which suppress close‐packing and enables the formation of a rectangular C 60 bilayer via vdW epitaxy. Interestingly, the third C 60 layer undergoes a phase transition to hexagonal close‐packing, indicating attenuation of the templating effect with increasing layer thickness. This work provides a synergistic molecular guidance approach for designing novel C 60 nanostructures with controllable dimensions, demonstrating potential for the precise construction of carbon‐based nanostructures and paving the way for future applications in molecular electronics.


  • Open Access

    A Review of On-Surface Synthesis and Characterization of Macrocycles

    by Chao Yan, Yiwen Wang, Jiahui Li, Xiaorui Chen, Xin Zhang, Jianzhi Gao, Minghu Pan

    Macrocyclic organic nanostructures have emerged as crucial components of functional supramolecular materials owing to their unique structural and chemical features, such as their distinctive “infinite” cyclic topology and tunable topology-dependent properties, attracting significant recent attention. However, the controlled synthesis of macrocyclic compounds with well-defined compositions and geometries remains a formidable challenge. On-surface synthesis, capable of constructing nanostructures with atomic precision on various substrates, has become a frontier technique for exploring novel macrocyclic architectures. This review summarizes the recent advances in the on-surface synthesis of macrocycles. It focuses on analyzing the synthetic mechanisms and conformational characterization of macrocycles formed through diverse bonding interactions, including both covalent and non-covalent linkages. This review elucidates the intricate interplay between the thermodynamic and kinetic factors governing macrocyclic structure formation across these bonding types and clarifies the critical influence of the reaction temperature and external conditions on the cyclization efficiency. Ultimately, this study offers design strategies for the precise on-surface synthesis of larger and more flexible macrocyclic compounds.


  • Open Access

    Theoretical Investigation of Elastic, Electronic, and Thermodynamic Properties of Half-Heusler Semiconductors ZrNiPb and ZrPdPb Under Pressure

    by Xiaorui Chen, Xin Zhang, Zhibin Shao, Jianzhi Gao, Minghu Pan

    The half-Heusler semiconductors ZrNiPb and ZrPdPb have attracted considerable attention due to their excellent thermoelectric performance, owing largely to their appropriate energy bandgap. However, the bandgap is sensitive to pressure, which may influence their thermoelectric behavior. In this study, the effects of pressure on the elastic, electronic, and thermodynamic properties of the half-Heusler semiconductors ZrNiPb and ZrPdPb are investigated based on first-principles calculations combined with the quasi-harmonic Debye model. After verifying their structural, dynamic, and mechanical stability, we found a small indirect bandgap of 0.36 eV for ZrNiPb and 0.49 eV for ZrPdPb, and they increase with increasing pressure. According to the obtained elastic modulus, ZrNiPb and ZrPdPb become more and more ductile as the pressure increases. In addition, the thermodynamic properties of ZrNiPb and ZrPdPb are investigated using the quasi-harmonic Debye model, as implemented in the Gibbs program, which will provide a reference for the experiment.


  • Open Access

    Large-scale 2D heterostructures from hydrogen-bonded organic frameworks and graphene with distinct Dirac and flat bands

    by Xin Zhang, Xiaoyin Li, Zhengwang Cheng, Aixi Chen, Pengdong Wang, Xingyue Wang, Xiaoxu Lei, Qi Bian, Shaojian Li, Bingkai Yuan, et al.

    The current strategies for building 2D organic-inorganic heterojunctions involve mostly wet-chemistry processes or exfoliation and transfer, leading to interface contaminations, poor crystallizing, or limited size. Here we show a bottom-up procedure to fabricate 2D large-scale heterostructure with clean interface and highly-crystalline sheets. As a prototypical example, a well-ordered hydrogen-bonded organic framework is self-assembled on the highly-oriented-pyrolytic-graphite substrate. The organic framework adopts a honeycomb lattice with faulted/unfaulted halves in a unit cell, resemble to molecular “graphene”. Interestingly, the topmost layer of substrate is self-lifted by organic framework via strong interlayer coupling, to form effectively a floating organic framework/graphene heterostructure. The individual layer of heterostructure inherits its intrinsic property, exhibiting distinct Dirac bands of graphene and narrow bands of organic framework. Our results demonstrate a promising approach to fabricate 2D organic-inorganic heterostructure with large-scale uniformity and highly-crystalline via the self-lifting effect, which is generally applicable to most of van der Waals materials.


  • Open Access

    Orientational Growth of Flexible van der Waals Supramolecular Networks

    by Haoxuan Ding, Xin Zhang, Bosheng Li, Yitao Wang, Chunqiu Xia, Haoyu Zhao, Hualin Yang, Ying Gao, Xiaorui Chen, Jianzhi Gao, et al.

    The capacity for nanopatterning and functionality is a promising facet of supramolecular self‐assembly. However, the formation of molecular frameworks entirely dependent on van der Waals (vdW) interactions is infrequently explored. Herein, 2D vdW supramolecular structures are synthesized through the self‐assembled cocrystallization of C60 and decanethiol (DT) molecules on Au(111) surface. Notably, the system eliminates the need of functional groups for specific bonding between adjacent units. The conformation C60/DT is delicately manipulated by adjusting molecular coverage and annealing temperature. The absence of directional bonding between C60 and DT molecules facilitates the formation of a variety of stable phases at room temperature (RT), such as 1) porous C60 networks with thiol‐filled pores and 2) self‐synthesized (C60)n nanochains with thiol spacers interspersed between the chains are achieved and visualized by scanning tunneling microscopic imaging under RT. This innovative integration of the vdW interaction unveils new avenues for developing supramolecular patterns characterized by their comparatively weak but exceptionally adaptable bonding.


  • Kinetic Controlled Chirality Transfer and Induction in 2D Hydrogen‐Bonding Assemblies of Glycylglycine on Au(111)

    by Xin Zhang, Haoxuan Ding, Shu Yang, Hualin Yang, Xiaoqing Yang, Bosheng Li, Xueting Xing, Yaojie Sun, Guangxin Gu, Xiaorui Chen, et al.

    Chirality transfer is of vital importance that dominates the structure and functionality of biological systems and living matters. External physical stimulations, e.g. polarized light and mechanical forces, can trigger the chirality symmetry breaking, leading to the appearance of the enantiomeric entities created from a chiral self‐assembly of achiral molecule. Here, several 2D assemblies with different chirality, synthesized on Au(111) surface by using achiral building blocks – glycylglycine (digly), the simplest polypeptide are reported. By delicately tuning the kinetic factors, i.e., one‐step slow/rapid deposition, or stepwise slow deposition with mild annealing, achiral square hydrogen‐bond organic frameworks (HOF), homochiral rhombic HOF and racemic rectangular assembly are achieved, respectively. Chirality induction and related symmetry broken in assemblies are introduced by the handedness (H‐bond configurations in principle) of the assembled motifs and then amplified to the entire assemblies via the interaction between motifs. The results show that the chirality transfer and induction of biological assemblies can be tuned by altering the kinetic factors instead of applying external forces, which may offer an in‐depth understanding and practical approach to peptide chiral assembly on the surfaces and can further facilitate the design of desired complex biomolecular superstructures.