TETürkan Sezen Erhamza

Türkan Sezen Erhamza

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Türkan Sezen Erhamza has a total of 44 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Changes in nasal cavity volume and intercanine width following rapid maxillary expansion: is there a correlation?

    by Büşra Özal Güneş, Türkan Sezen Erhamza, Perihan Dalgalı, Alaattin Tekeli

    Aims: The aim of this study was to evaluate changes in nasal cavity volume and maxillary intercanine width following rapid maxillary expansion (RME) and to investigate whether a relationship exists between these two parameters.Methods: This retrospective study included patients with transverse maxillary deficiency treated with a Hyrax-type RME appliance. Nasal cavity volume was evaluated using acoustic rhinometry, a non-invasive method commonly used to assess nasal cavity dimensions, while maxillary intercanine width was measured on dental casts using a digital caliper with 0.01-mm accuracy. Measurements were performed before expansion (T0) and after the retention period (T1). Pre- and post-treatment changes were analyzed using paired t-tests, and the association between changes in nasal cavity volume and intercanine width was evaluated using Pearson correlation analysis. Statistical significance was set at p

  • Open Access

    Comparative evaluation of the skeletal, dental, and soft-tissue effects of twin block, monoblock, and invisalign mandibular advancement appliances

    by Türkan Sezen Erhamza, Zeynep Çevi̇k, Ebru İlHan Koçak, Alaattin Tekeli̇

    The aim of this study was to evaluate and compare the skeletal, dental, and soft-tissue effects of the Twin Block, Monoblock, and Invisalign Mandibular Advancement (Invisalign MA) appliances used for functional treatment in individuals with skeletal Class II malocclusion. The study included 45 individuals in the S-MP3cap stage of growth and development who were treated with Monoblock (n = 15), Twin Block (n = 15), or Invisalign MA (n = 15) appliances. Lateral cephalometric radiographs were obtained before functional treatment (T0) and after treatment (T1). A total of 29 measurements were used to assess changes in the dental, skeletal, and soft tissues. Across all treatment groups, significant decreases were observed in ANB°, Wits appraisal, overjet, overbite, and skeletal and soft-tissue convexity angles; similarly, significant increases were identified in SNB°, Co-Gn (mm), Pg-Na Perp, FMA°, GoGn-SN°, LFH/TFH, L1-NB°, IMPA°, and the nasolabial angle throughout the treatment period. No statistically significant differences were found among the groups regarding the changes observed in the soft tissues. The Invisalign MA group showed less increase in vertical parameters than the other groups. Maxillary incisor inclinations decreased more significantly in the Invisalign MA group. Mandibular incisor inclination changes were similar between Monoblock and Invisalign MA groups but greater in the Twin Block group. Maxillary molar eruption was comparable between Invisalign MA and Monoblock groups, while Twin Block showed a more pronounced increase. Finally, mandibular advancement angles were similar across all groups.

  • Open Access

    Dentoskeletal Outcomes of Two Digitally Designed Bone-Borne MARPE Approaches: A Three-Dimensional CBCT Study

    by İrem Öztürk Kırkpunar, Türkan Sezen Erhamza, Ebru İlhan Koçak, Alaattin Tekeli, Funda Erdugan

    Miniscrew-assisted rapid palatal expansion (MARPE) is increasingly used to manage transverse maxillary deficiency; however, three-dimensional evidence comparing bone-borne appliance designs remains limited. This retrospective cone-beam computed tomography (CBCT) study evaluated the dentoskeletal outcomes of two digitally planned MARPE approaches using Superscrew- and Hyrax-type expansion screw systems. Because activation regimen was associated with the screw system, the groups were interpreted as two clinical approaches rather than isolated screw-design comparisons. Twenty-seven individuals were divided into Superscrew-type (n = 15) and Hyrax-type (n = 12) groups. Pretreatment and post-expansion CBCT records were used to assess midpalatal and pterygopalatine suture opening, nasal and maxillary width changes, and buccal and palatal intermolar distances. Both approaches produced significant increases in nasal, maxillary, and intermolar widths. No significant intergroup differences were observed in sutural opening, PNS/ANS ratio, pterygopalatine suture separation, nasal width, maxillary width, or buccal intermolar distance changes. A borderline unadjusted difference was observed for palatal intermolar distance (6.08 ± 2.48 mm vs. 4.29 ± 1.97 mm; unadjusted p = 0.047), but it did not remain significant after correction for multiple comparisons. Therefore, this finding should be interpreted as exploratory rather than clinically confirmatory.

  • KONJENİTAL MAKSİLLER LATERAL KESİCİ DİŞ EKSİKLİĞİNİN ANGLE MALOKLÜZYON SINIFLAMASINA GÖRE GÖRÜLME SIKLIĞI: RETROSPEKTİF BİR ÇALIŞMA

    by İrEm Öztürk Kirkpunar, Türkan Sezen Erhamza, Alaattin Tekeli

    Amaç: Bu çalışmanın amacı, konjenital maksiller lateral kesici diş eksikliğinin Angle maloklüzyon sınıflarına göre görülme sıklığını değerlendirmek ve bu dental anomalinin farklı maloklüzyon tipleri ile ilişkisini incelemektir. Gereç ve Yöntem: Bu retrospektif çalışmaya, ortodontik tedavi amacıyla başvuran ve dahil edilme kriterlerini karşılayan toplam 234 birey dâhil edilmiştir. Çalışma grubunda yer alan bireylerin yaş, cinsiyet, Angle maloklüzyon sınıflaması ve konjenital maksiller lateral kesici diş varlığı klinik kayıtlar ve radyografik incelemeler aracılığıyla değerlendirilmiştir. Konjenital maksiller lateral kesici diş eksikliği ile Angle Sınıf I, II ve III maloklüzyon grupları arasındaki ilişki Ki-kare testi ile analiz edilmiştir. İstatistiksel anlamlılık düzeyi p

  • Open Access

    Evaluation of salivary alpha-amylase and cortisol levels in patients undergoing orthodontic mini-implant treatment: a short-term prospective comparative study

    by Ismayil Malikov, Turkan Sezen Erhamza, Himmet Yildirim, Ebru Ilhan Kocak, Osman Caglayan

    Background: This study aimed to evaluate salivary alpha-amylase (sAA) and salivary cortisol (sC) levels, alongside self-reported dental anxiety, in patients undergoing orthodontic mini-implant (OMI) placement compared with those receiving routine orthodontic treatment (noninvasive follow-up procedures such as archwire or elastic ligature replacement). The primary outcomes were the changes in sC and sAA levels, while the secondary outcome was the dental fear survey (DFS) score. It was hypothesized that OMI placement would elicit stronger physiological and psychological stress responses. Methods: A short-term prospective comparative study was conducted on 54 participants (27 OMI and 27 control), aged 12–30 years. Dental anxiety was assessed using the DFS. Salivary samples were collected at baseline (T1) and immediately after the procedure (T2) for sAA and sC analysis. Mann–Whitney U, Wilcoxon, t-tests, and mixed ANOVA were performed (α = 0.05). Results: sC increased significantly in the OMI group (0.30 ± 0.09 to 0.39 ± 0.13 µg/dl; Δ = +0.09 µg/dl, P < .001) but remained stable in controls. The OMI group demonstrated higher DFS scores than controls (63.81 ± 22.59 vs. 40.07 ± 21.28). Female participants reported higher dental fear than males (P = .004), and DFS correlated negatively with age (P = .014). sAA levels were higher in the OMI group, although neither group nor time effects were significant. Conclusions: Orthodontic mini-implant placement induces stronger acute stress responses than routine orthodontic treatment, as evidenced by higher dental fear and increased salivary cortisol. These findings highlight the need for enhanced patient management during invasive orthodontic interventions.

  • Open Access

    Skeletal, Dentoalveolar, and Soft Tissue Effects of Conventional and Digitally Designed Functional Appliances in Class II Malocclusion: A Retrospective Pilot Study

    by İrem Öztürk Kırkpunar, Merve Kırlangıç Alnıaçık, Türkan Sezen Erhamza, Funda Erdugan, Ebru İlhan Koçak, Alaattin Tekeli

    Functional appliances constitute a common treatment approach for skeletal Class II malocclusion. However, evidence regarding the effects of appliance design and manufacturing workflows on treatment outcomes remains limited. This study aimed to compare the skeletal, dentoalveolar, and soft tissue effects of conventionally fabricated, prefabricated, and digitally designed functional appliances. A total of 28 growing patients with skeletal Class II malocclusion were retrospectively assessed and evenly assigned to four treatment groups: Twin Block, PowerScope, Invisalign Mandibular Advancement, and digitally designed Herbst. Skeletal, dentoalveolar, and soft tissue parameters were evaluated using lateral cephalometric radiographs obtained before (T0) and after treatment (T1). Statistical analyses included one-way ANOVA, repeated-measures ANOVA, and the Kruskal–Wallis test. All treatment modalities demonstrated significant sagittal improvement, characterized by reductions in ANB and Wits values and increases in SNB angle and mandibular length (Co–Gn). The Twin Block appliance showed a significantly greater increase in mandibular length compared with the other groups (p = 0.037). Dentoalveolar adaptations were more pronounced in the PowerScope and Invisalign Mandibular Advancement groups. In conclusion, within the limitations of this retrospective pilot study, functional appliances with different design and manufacturing characteristics appear to produce distinct skeletal and dentoalveolar response patterns, and digitally designed systems may represent clinically effective alternatives for the treatment of skeletal Class II malocclusion; however, these findings should be considered preliminary and interpreted with caution.

  • Open Access

    Evaluation of panoramic radiographic parameters for age and sex estimation in subadults

    by Alime Okkesim, Turkan Sezen Erhamza

    Background: This study used panoramic radiographic morphometry to evaluate the age and sex in individuals 9–17 years old within the Turkish population. Given the limited research on adolescence and pre-adolescence, the study aims to enhance forensic anthropological methodologies by identifying key mandibular parameters that exhibit sexual dimorphism and age-related variations. Six hundred thirty-one panoramic radiographs (326 females, 305 males) were analyzed. Standardized imaging protocols were used to measure various mandibular parameters, including bigonial width (BW), condylar height (CH), ramus breadth (MaxRB, MinRB), coronoid height (CorH), projective ramus height (PRH), gonial angle (GA), antegonial angle (AnGA), antegonial height (AnGH), and mandibular cortical index (MCI). The Mann–Whitney U test and univariate linear regression analysis were used to assess sex-based differences and age estimation potential. Results: Significant sex differences were observed in multiple mandibular parameters. Females exhibited higher CH, PRH, CorH, MCI, and MI values than males, whereas males had higher BW, MinRB, and AnGH values than females. Regression analysis indicated that CH and CorH demonstrated statistically significant correlations with age in both sexes; however, the explained variances (R²) were modest, suggesting that these variables have limited predictive power. Conclusions: Although panoramic radiographs may offer valuable insights into age and sex estimation in subadults, such estimations are influenced by developmental variability. CH and CorH are associated with age, however, their reliability as standalone forensic indicators remains limited. The present findings offer preliminary support for the use of non-invasive radiographic techniques for age and sex estimation in forensic anthropology, particularly among subadult individuals. The lack of population-specific reference standards may limit the generalizability of these results. The complex interplay of developmental, hormonal, and environmental factors on mandibular growth during adolescence warrants further investigation through prospective, multicenter studies.

  • Open Access

    Comparative Effects of Rubber Dam and Traditional Isolation Techniques on Orthodontic Bracket Positioning: A 3D Digital Model Evaluation

    by Türkan Sezen Erhamza, Kadir Can Küçük, İsmayil Malikov

    Dental professionals face an increased risk of exposure to biological fluids, aerosols, and droplets due to close patient contact, which heightens the risk of infectious diseases. Rubber dam, commonly used in dentistry, not only isolates treatment areas but also reduces aerosol and droplet dispersion. Accurate orthodontic bracket positioning is crucial for optimal treatment, and isolation techniques like rubber dam and traditional methods are essential for ensuring precise bracket placement and bonding. This study aims to compare the effects of rubber dam and traditional isolation techniques on orthodontic bracket positioning using 3D digital models, while also evaluating the impact of these methods on the patient’s chair time during the procedure. The study group (RDI—Rubber Dam Isolation) included individuals isolated with a rubber dam, while the control group (TI—Traditional Isolation) consisted of those isolated using retractors and cotton rolls. Digital models were taken from these groups before bracketing (BB) and after bracketing (AB). BB models were transferred to the OrthoanalyzerTM program for virtual bracketing and a virtual bonding model (VB) was created. AB and VB models were superimposed in the GOM InspectTM program in order to determine the accuracy of the bracket positions. Linear measurements were taken along the X, Y, and Z axes, while angular measurements were recorded on the XY, XZ, and YZ planes. There was no significant difference in deviation values along the X-axis between the RDI and TI groups. In both groups, the lowest deviation values in linear measurements were found in the Z-axis, while the highest deviation values were found in the Y-axis. In the Y-axis, it was found that the deviation values were higher in the RDI group for tooth numbers 32 and 33, and in the Z-axis, the deviation values were higher in the RDI group for tooth numbers 34 and 44. In angular measurements, it was observed that in the XY plane, the deviation values in tooth number 35 were higher in the TI group. RDI proves to be an effective method for ensuring accurate bracket positioning in orthodontic procedures when compared to traditional isolation techniques. Especially considering infectious diseases, the use of RDI is considered appropriate.


  • Investigation of Factors Affecting Temporomandibular Joint Disorders: Sampling of The Faculty of Dentistry of Kırıkkale University

    by İsMayıl Malikov, Sevgi Yurt Öncel, Türkan Sezen Erhamza

    Objective: In this study, factors affecting temporomandibular joint disorders (TMDs) among Kırıkkale University Faculty of Dentistry students were investigated by confirmatory factor analysis. Data were obtained using the Fonseca Anamnestic Index (FAI). Methods: The FAI scale and its factor structure were first analysed using the scree plot, Kaiser-Meyer-Olkin statistics, Bartlett's Test of Sphericity, Cronbach's Alpha and Guttman's Lamda6 coefficients. Subsequently, confirmatory factor analysis was conducted to verify the proposed factor structure. Results: All scale items appear to have a significant effect on FAI (p<0.01). The item in the "F1-Function-comorbidity" sub-factor of the FAI scale that has the greatest impact is Item I1, which is related to difficulty in opening the mouth wide. The variance explained by the latent factor is 77.9%. The variable with the second highest impact on this F1 factor was Item I6, which was about whether earache or jaw pain was present. The variance explained by the latent factor is 65.9%. In addition, the variable with the highest impact in the "F2-Occlusion-parafunction-psychology " sub-factor is Item I8, which is about the habit of clenching or grinding teeth. The variance explained by the latent factor is 45.6%. Conclusions: According to the results obtained, the reliability and consistency of the FAI scale was ensured. Considering all the fit criteria, it turned out that the proposed model was valid for the sample. The results of the confirmatory factor analysis indicated that the data provided a good fit to the proposed model, as evidenced by the RMSEA, SRMR, GFI, AGFI, CFI, NFI, NNFI, TLI, CR, and AVE indices. It is thought that the application of different physiotherapy techniques can reduce the problems caused by TMD in patients, make it easier to open the mouth wide, and be effective in controlling teeth clenching and jaw pain.