Feiyang Li
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Feiyang Li has a total of 86 co-authors. Here are the top co-authors by number of shared publications:
- Chao Shi
School of Environmental and Chemical Engineering, Jiangsu University of Science and Technology, Zhenjiang 212100, China
12 shared publications Aihua Yuan
Jiangsu University of Science and Technology
7 shared publicationsQiuxia Li
Jiangsu University of Science and Technology
7 shared publications- Chuluo Yang
Shenzhen Key Laboratory of New Information Display and Storage Materials, College of Materials Science and Engineering, Shenzhen University, Shenzhen 518060, P. R. China
5 shared publications - Qiuxia Li
School of Environmental and Chemical Engineering, Jiangsu University of Science and Technology, Zhenjiang 212003, P. R. China
5 shared publications Zhen Jiang
School of Environmental and Chemical Engineering
5 shared publications
Latest Publications
- 18 July 2026
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 65 (30) , 17593-17602
Oxygen-Bridged Boron NHC-Based Red-Emitting Iridium Complexes Exhibiting Tri-Charge (0, −1, −2) Ligands
Phosphorescent iridium complexes bearing N-heterocyclic carbenes (NHCs) have attracted significant attention for violet and blue emission, yet red-emitting variants remain challenging. This study introduces two rigid oxygen-bridged boron NHC ligands (Bpmi and Bpmb) as monoanionic (−1) ligands into an iridium system with tri-charge (0, −1, −2) ligands, with biphenyl (bp) as the dianionic (−2) ligand and bipyridine (bpy) or phenanthroline (phen) as the neutral (0) ligand, affording four neutral complexes: Ir(Bpmi)bpy, Ir(Bpmi)phen, Ir(Bpmb)bpy, and Ir(Bpmb)phen. Single-crystal structures reveal that the carbon atom of the oxygen-bridged boron unit exhibits a trans-C–C arrangement with that of the biphenyl ligand, while the NHC carbon atom shows a trans-C–N arrangement with the nitrogen atom of the neutral (0) ligand, with π–π, C–H···π, and C–H···O intermolecular interactions present. All complexes exhibit efficient red luminescence (637–650 nm), with phen and Bpmb ligands enhancing efficiency through greater rigidity. As OLED dopants, Ir(Bpmi)phen, Ir(Bpmb)bpy, and Ir(Bpmb)phen achieved maximum EQEs of 9.8%, 4.3%, and 10.3% with emission peaks at 632, 629, and 624 nm (CIE: 0.65,0.34; 0.63,0.36; 0.62,0.37), respectively. This research provides significant insights for the design and optoelectronic applications of red phosphorescent iridium complexes based on oxygen-bridged boron fused-ring NHC ligands.
- 18 July 2026
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 65 (30) , 17593-17602
Oxygen-Bridged Boron NHC-Based Red-Emitting Iridium Complexes Exhibiting Tri-Charge (0, −1, −2) Ligands
Phosphorescent iridium complexes bearing N-heterocyclic carbenes (NHCs) have attracted significant attention for violet and blue emission, yet red-emitting variants remain challenging. This study introduces two rigid oxygen-bridged boron NHC ligands (Bpmi and Bpmb) as monoanionic (−1) ligands into an iridium system with tri-charge (0, −1, −2) ligands, with biphenyl (bp) as the dianionic (−2) ligand and bipyridine (bpy) or phenanthroline (phen) as the neutral (0) ligand, affording four neutral complexes: Ir(Bpmi)bpy, Ir(Bpmi)phen, Ir(Bpmb)bpy, and Ir(Bpmb)phen. Single-crystal structures reveal that the carbon atom of the oxygen-bridged boron unit exhibits a trans-C–C arrangement with that of the biphenyl ligand, while the NHC carbon atom shows a trans-C–N arrangement with the nitrogen atom of the neutral (0) ligand, with π–π, C–H···π, and C–H···O intermolecular interactions present. All complexes exhibit efficient red luminescence (637–650 nm), with phen and Bpmb ligands enhancing efficiency through greater rigidity. As OLED dopants, Ir(Bpmi)phen, Ir(Bpmb)bpy, and Ir(Bpmb)phen achieved maximum EQEs of 9.8%, 4.3%, and 10.3% with emission peaks at 632, 629, and 624 nm (CIE: 0.65,0.34; 0.63,0.36; 0.62,0.37), respectively. This research provides significant insights for the design and optoelectronic applications of red phosphorescent iridium complexes based on oxygen-bridged boron fused-ring NHC ligands.
- 30 March 2026
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 65 (14) , 8044-8051
Pure Near-Infrared Iridium Complexes with Rigid Oxygen-Bridged Boron Units and Solution-Processed OLED Application
Near-infrared (NIR) phosphorescent materials exhibiting emission peaks beyond 700 nm hold substantial importance for advancements in optoelectronics and biomedicine. In this study, two novel near-infrared iridium complexes (Ir(Bpa)2dpm and Ir(Bqz)2dpm) were successfully constructed by incorporating rigid oxygen-bridged boron moieties in combination with either phenanthridine or quinazoline units. Notably, both complexes display pure near-infrared emissions exceeding 750 nm, with their respective emission peaks positioned at 756 and 787 nm, thus demonstrating high near-infrared purity (>98%). Given its superior optical characteristics and good solubility, Ir(Bpa)2dpm was selected as the emissive layer material for a solution-processed organic light-emitting diode (OLED) device. The fabricated device demonstrated a good maximum external quantum efficiency (EQE) of 1.2%, along with an emission peak centered at 760 nm. This research offers a crucial approach for designing pure near-infrared (NIR) phosphorescent iridium complexes and their utilization in optoelectronic devices.
- 30 March 2026
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 65 (14) , 8044-8051
Pure Near-Infrared Iridium Complexes with Rigid Oxygen-Bridged Boron Units and Solution-Processed OLED Application
Near-infrared (NIR) phosphorescent materials exhibiting emission peaks beyond 700 nm hold substantial importance for advancements in optoelectronics and biomedicine. In this study, two novel near-infrared iridium complexes (Ir(Bpa)2dpm and Ir(Bqz)2dpm) were successfully constructed by incorporating rigid oxygen-bridged boron moieties in combination with either phenanthridine or quinazoline units. Notably, both complexes display pure near-infrared emissions exceeding 750 nm, with their respective emission peaks positioned at 756 and 787 nm, thus demonstrating high near-infrared purity (>98%). Given its superior optical characteristics and good solubility, Ir(Bpa)2dpm was selected as the emissive layer material for a solution-processed organic light-emitting diode (OLED) device. The fabricated device demonstrated a good maximum external quantum efficiency (EQE) of 1.2%, along with an emission peak centered at 760 nm. This research offers a crucial approach for designing pure near-infrared (NIR) phosphorescent iridium complexes and their utilization in optoelectronic devices.
- Open Access
- 3 March 2026
- Published by Royal Society of Chemistry (RSC) in Chemical Science
- Vol. 17 (17) , 8662-8669
Realizing luminescent single crystals of covalent organic polymers with color-tunable emission through isomer engineering
Preparing luminescent single crystals of B–N-containing covalent organic polymers (COPs) is very important but highly challenging, since most conditions only produce luminescence-silent crystals. To address this issue, we employ an isomer engineering strategy to successfully prepare luminescent (CityU-50) and luminescence-silent (CityU-60) single crystals of B–N linked COPs based on two distinct chromophore isomers, 3,3′,6,6′-tetra(pyridin-4-yl)-9,9′-bicarbazole (3,6-TPy-BCz) and 2,2′,7,7′-tetra (pyridin-4-yl)-9,9′-bicarbazole (2,7-TPy-BCz). Single-crystal X-ray diffraction analysis reveals that 3,6-TPy-BCz can lead to a “loose” stacking model of helical polymer chains in CityU-50, effectively suppressing interchain aggregation and endowing CityU-50 with unprecedented visible-light-excitable luminescence, while 2,7-TPy-BCz results in a “close” packing model of helical polymer chains in CityU-60, leading to a non-emissive structure. This factor validates our design principle. We also find that CityU-50 can display excitation-dependent and solvent-responsive luminescence due to the different aggregation states within the crystal and solvent-triggered packing changes in the polymer chains of CityU-50. Based on these responses, we demonstrate the application of CityU-50 in advanced information encryption. This work not only delivers a new class of smart crystalline materials but also establishes a powerful strategy for engineering crystalline polymers with precisely tailored structures and properties.
- 3 March 2026
- Published by Royal Society of Chemistry (RSC) in Chemical Science
- Vol. 17 (17) , 8662-8669
Open AccessRealizing luminescent single crystals of covalent organic polymers with color-tunable emission through isomer engineering
Preparing luminescent single crystals of B–N-containing covalent organic polymers (COPs) is very important but highly challenging, since most conditions only produce luminescence-silent crystals. To address this issue, we employ an isomer engineering strategy to successfully prepare luminescent (CityU-50) and luminescence-silent (CityU-60) single crystals of B–N linked COPs based on two distinct chromophore isomers, 3,3′,6,6′-tetra(pyridin-4-yl)-9,9′-bicarbazole (3,6-TPy-BCz) and 2,2′,7,7′-tetra (pyridin-4-yl)-9,9′-bicarbazole (2,7-TPy-BCz). Single-crystal X-ray diffraction analysis reveals that 3,6-TPy-BCz can lead to a “loose” stacking model of helical polymer chains in CityU-50, effectively suppressing interchain aggregation and endowing CityU-50 with unprecedented visible-light-excitable luminescence, while 2,7-TPy-BCz results in a “close” packing model of helical polymer chains in CityU-60, leading to a non-emissive structure. This factor validates our design principle. We also find that CityU-50 can display excitation-dependent and solvent-responsive luminescence due to the different aggregation states within the crystal and solvent-triggered packing changes in the polymer chains of CityU-50. Based on these responses, we demonstrate the application of CityU-50 in advanced information encryption. This work not only delivers a new class of smart crystalline materials but also establishes a powerful strategy for engineering crystalline polymers with precisely tailored structures and properties.
- Open Access
Tuning Excited-State Properties in Pyrrolo[3,2-b]pyrrole-Based Donor–Acceptor Emitters via Molecular Conformation and Conjugation Control
Nitrogen-fused conjugated heterocycles have attracted growing interest owing to their tunable electronic properties and potential in organic optoelectronics. In this study, two centrosymmetric donor–acceptor-type emitters PP-6F and PPA-3F were designed by incorporating trifluorophenyl and anthracene acceptor units into a pyrrolo[3,2-b]pyrrole (PP) framework. The experimental and theoretical results reveal that subtle modulations in molecular conformation and π-conjugation pathways strongly affect the excited-state characteristics. PP-6F, featuring a nearly coplanar donor–acceptor configuration, exhibits efficient π-electron delocalization and a dominant local excitation (LE) emission with a large oscillator strength. In contrast, the bulky anthracene in PPA-3F increases the donor–acceptor dihedral angle, reduces conjugation coupling, and promotes orbital separation, leading to a hybrid intramolecular charge transfer and local excitation (ICT/LE) excited state. The rigid anthracene framework suppresses structural reorganization and nonradiative decay, allowing PPA-3F to retain a relatively high oscillator strength despite its charge-transfer nature. This work demonstrates that fine-tuning donor–acceptor dihedral angles and conjugation continuity within PP-based systems is an effective strategy for balancing LE and ICT emissions and developing high-efficiency nitrogen-fused organic emitters and scintillators.
Open AccessTuning Excited-State Properties in Pyrrolo[3,2-b]pyrrole-Based Donor–Acceptor Emitters via Molecular Conformation and Conjugation Control
Nitrogen-fused conjugated heterocycles have attracted growing interest owing to their tunable electronic properties and potential in organic optoelectronics. In this study, two centrosymmetric donor–acceptor-type emitters PP-6F and PPA-3F were designed by incorporating trifluorophenyl and anthracene acceptor units into a pyrrolo[3,2-b]pyrrole (PP) framework. The experimental and theoretical results reveal that subtle modulations in molecular conformation and π-conjugation pathways strongly affect the excited-state characteristics. PP-6F, featuring a nearly coplanar donor–acceptor configuration, exhibits efficient π-electron delocalization and a dominant local excitation (LE) emission with a large oscillator strength. In contrast, the bulky anthracene in PPA-3F increases the donor–acceptor dihedral angle, reduces conjugation coupling, and promotes orbital separation, leading to a hybrid intramolecular charge transfer and local excitation (ICT/LE) excited state. The rigid anthracene framework suppresses structural reorganization and nonradiative decay, allowing PPA-3F to retain a relatively high oscillator strength despite its charge-transfer nature. This work demonstrates that fine-tuning donor–acceptor dihedral angles and conjugation continuity within PP-based systems is an effective strategy for balancing LE and ICT emissions and developing high-efficiency nitrogen-fused organic emitters and scintillators.
- 17 March 2025
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 64 (12) , 6326-6334
Peripheral-Carbazole-Group-Functionalized Tetradentate Carbene Platinum(II)/Palladium(II) Phosphorescent Complexes: Synthesis, Structures, and Optical Tuning
We designed and synthesized two novel tetradentate carbene ligands, IM-carme and IM-cardtb, both containing a peripheral carbazole group, with methyl and 3,5-ditert-butyl-phenyl groups on their carbene moieties, respectively. Thus, four new tetradentate carbene platinum(II) and palladium(II) complexes (Pt-carme, Pt-cardtb, Pd-carme, and Pd-cardtb) were synthesized. The X-ray structures reveal that the 3,5-ditert-butyl-phenyl group promotes a head-to-tail stacking arrangement and intermolecular metal-metal interactions (Pt-Pt or Pd-Pd), whereas the methyl group leads to a head-to-head stacking pattern and intermolecular π-π interactions. Notably, all complexes emit narrow-band (43-55 nm) phosphorescence ranging from sky blue to deep blue within the wavelength range of 439-502 nm, and the 3, 5-ditert-butyl-phenyl-substituted complexes (Pt-cardtb or Pd-cardtb) have longer emission wavelength, higher emission efficiency, and longer emission lifetime than the corresponding methyl-substituted complexes (Pt-carme or Pd-carme). Theoretical calculations demonstrate that the T1 state of these complexes exhibits prominent ILCT from the peripheral carbazole group, skeletal carbazole-phenoxy moieties to the benzimidazole and pyridine moieties, as well as MLCT characteristics. Furthermore, the platinum complexes exhibit more pronounced MLCT effects than the corresponding palladium complexes, leading to shorter lifetime and higher efficiency. This research offers novel insights for designing tetradentate carbene platinum(II)/palladium(II) phosphorescent materials featuring peripheral functional groups.
- 17 March 2025
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 64 (12) , 6326-6334
Peripheral-Carbazole-Group-Functionalized Tetradentate Carbene Platinum(II)/Palladium(II) Phosphorescent Complexes: Synthesis, Structures, and Optical Tuning
We designed and synthesized two novel tetradentate carbene ligands, IM-carme and IM-cardtb, both containing a peripheral carbazole group, with methyl and 3,5-ditert-butyl-phenyl groups on their carbene moieties, respectively. Thus, four new tetradentate carbene platinum(II) and palladium(II) complexes (Pt-carme, Pt-cardtb, Pd-carme, and Pd-cardtb) were synthesized. The X-ray structures reveal that the 3,5-ditert-butyl-phenyl group promotes a head-to-tail stacking arrangement and intermolecular metal-metal interactions (Pt-Pt or Pd-Pd), whereas the methyl group leads to a head-to-head stacking pattern and intermolecular π-π interactions. Notably, all complexes emit narrow-band (43-55 nm) phosphorescence ranging from sky blue to deep blue within the wavelength range of 439-502 nm, and the 3, 5-ditert-butyl-phenyl-substituted complexes (Pt-cardtb or Pd-cardtb) have longer emission wavelength, higher emission efficiency, and longer emission lifetime than the corresponding methyl-substituted complexes (Pt-carme or Pd-carme). Theoretical calculations demonstrate that the T1 state of these complexes exhibits prominent ILCT from the peripheral carbazole group, skeletal carbazole-phenoxy moieties to the benzimidazole and pyridine moieties, as well as MLCT characteristics. Furthermore, the platinum complexes exhibit more pronounced MLCT effects than the corresponding palladium complexes, leading to shorter lifetime and higher efficiency. This research offers novel insights for designing tetradentate carbene platinum(II)/palladium(II) phosphorescent materials featuring peripheral functional groups.
- 11 March 2025
- Published by Royal Society of Chemistry (RSC) in Chemical Communications
- Vol. 61 (29) , 5475-5478
Tuning charge transfer properties in symmetric and asymmetric pyrrolo[3,2- b ]pyrrole derivatives with hybridized local and charge-transfer characteristics
Structural modifications with carbazole groups in pyrrolo[3,2- b ]pyrrole-based scintillators enable precise control of dihedral angles, providing effective regulation of charge-transfer properties.
- 11 March 2025
- Published by Royal Society of Chemistry (RSC) in Chemical Communications
- Vol. 61 (29) , 5475-5478
Tuning charge transfer properties in symmetric and asymmetric pyrrolo[3,2- b ]pyrrole derivatives with hybridized local and charge-transfer characteristics
Structural modifications with carbazole groups in pyrrolo[3,2- b ]pyrrole-based scintillators enable precise control of dihedral angles, providing effective regulation of charge-transfer properties.
- 22 January 2025
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 64 (4) , 1901-1908
NHC-Based Deep-Red Phosphorescent Iridium Complexes Featuring Three-Charge (0, −1, −2) Ligands
N-heterocyclic carbene (NHC)-based phosphorescent iridium complexes have attracted extensive attention due to their good optical properties and high stability in recent years. However, currently reported NHC-based iridium complexes can easily achieve emission of blue, green, or even ultraviolet light, while emission of red or deep-red light is relatively rare. Here, we report a new family of NHC-based deep-red iridium complexes (Ir1, Ir2, Ir3, and Ir4) featuring three-charge (0, -1, -2) ligands. The single-crystal structures confirm that all complexes exhibit a trans-C-N configuration between the NHC carbon atom of the monoanionic (-1) ligand and the nitrogen atom of the neutral (0) ligand and that there are abundant intermolecular and intramolecular interactions in the crystalline state. Notably, all complexes exhibited an effective deep-red emission (650-664 nm). Moreover, the iridium complexes (Ir2 and Ir4) based on benzimidazol-2-ylidene (pmb) exhibited a higher emission efficiency and longer emission lifetime than the corresponding iridium complexes (Ir1 and Ir2) based on imidazol-2-ylidene (pmi), respectively. Density functional theory calculations demonstrate that the pmb ligand of Ir3 and Ir4 is more involved in the excited state than the pmi ligand of Ir1 and Ir2, which is caused by the stronger electron-donating ability of the pmb ligand. Considering better optical properties, Ir2 and Ir4 were eventually used as dopant emitters of the optical light-emitting diode (OLED) devices to obtain good maximum external quantum efficiency (8.5 and 10.1%) in the deep-red region (628 and 624 nm) with Commission Internationale deL'Eclairage (CIE) coordinates of (0.65, 0.34) and (0.63, 0.36), respectively, with a low turn-on voltage (2.4 V). This research provides an important idea for the design and optoelectronic applications of NHC-based deep-red phosphorescent iridium complexes.
- 22 January 2025
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 64 (4) , 1901-1908
NHC-Based Deep-Red Phosphorescent Iridium Complexes Featuring Three-Charge (0, −1, −2) Ligands
N-heterocyclic carbene (NHC)-based phosphorescent iridium complexes have attracted extensive attention due to their good optical properties and high stability in recent years. However, currently reported NHC-based iridium complexes can easily achieve emission of blue, green, or even ultraviolet light, while emission of red or deep-red light is relatively rare. Here, we report a new family of NHC-based deep-red iridium complexes (Ir1, Ir2, Ir3, and Ir4) featuring three-charge (0, -1, -2) ligands. The single-crystal structures confirm that all complexes exhibit a trans-C-N configuration between the NHC carbon atom of the monoanionic (-1) ligand and the nitrogen atom of the neutral (0) ligand and that there are abundant intermolecular and intramolecular interactions in the crystalline state. Notably, all complexes exhibited an effective deep-red emission (650-664 nm). Moreover, the iridium complexes (Ir2 and Ir4) based on benzimidazol-2-ylidene (pmb) exhibited a higher emission efficiency and longer emission lifetime than the corresponding iridium complexes (Ir1 and Ir2) based on imidazol-2-ylidene (pmi), respectively. Density functional theory calculations demonstrate that the pmb ligand of Ir3 and Ir4 is more involved in the excited state than the pmi ligand of Ir1 and Ir2, which is caused by the stronger electron-donating ability of the pmb ligand. Considering better optical properties, Ir2 and Ir4 were eventually used as dopant emitters of the optical light-emitting diode (OLED) devices to obtain good maximum external quantum efficiency (8.5 and 10.1%) in the deep-red region (628 and 624 nm) with Commission Internationale deL'Eclairage (CIE) coordinates of (0.65, 0.34) and (0.63, 0.36), respectively, with a low turn-on voltage (2.4 V). This research provides an important idea for the design and optoelectronic applications of NHC-based deep-red phosphorescent iridium complexes.
- 25 June 2024
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 63 (27) , 12556-12563
Three-Charge (0, −1, −2) Ligand-Based Binuclear and Mononuclear Deep-Red Phosphorescent Iridium Complexes Bearing Benzo[d]oxazole-2-Thiol Ligand
A new class of three-charge (0, -1, -2) ligand-based binuclear and mononuclear iridium complexes bearing benzo[d]oxazole-2-thiol ligand have been synthesized. Notably, the binuclear complexes (IrIr1 and IrIr2) can be generated at low temperatures by reacting the iridium complex precursors (2a and 2b) with equal amounts of the benzo[d]oxazole-2-thiol ligands, while the corresponding mononuclear complexes (Ir1 and Ir2) are formed at high temperatures. X-ray diffraction analysis shows that the benzo[d]oxazole-2-thiol ligand plays an unusual and interesting bridging role in binuclear complexes and induces rich intermolecular and intramolecular interactions, while in mononuclear complexes, it forms an interesting four-membered ring coordination. More importantly, all complexes experienced efficient deep-red emission in the 628-674 nm range, and the mononuclear complexes have higher luminescent efficiency and longer excited state lifetime than the binuclear complexes. As a result, organic light-emitting diode devices incorporating two mononuclear complexes (Ir1 and Ir2) as guest material of the light-emitting layer can obtain good maximum external quantum efficiency (3.5% and 5.5%) in the deep-red region (629 and 632 nm) with CIE coordinates (0.61, 0.33) and (0.62, 0.34), along with a low turn-on voltage (2.8 V).
- 25 June 2024
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 63 (27) , 12556-12563
Three-Charge (0, −1, −2) Ligand-Based Binuclear and Mononuclear Deep-Red Phosphorescent Iridium Complexes Bearing Benzo[d]oxazole-2-Thiol Ligand
A new class of three-charge (0, -1, -2) ligand-based binuclear and mononuclear iridium complexes bearing benzo[d]oxazole-2-thiol ligand have been synthesized. Notably, the binuclear complexes (IrIr1 and IrIr2) can be generated at low temperatures by reacting the iridium complex precursors (2a and 2b) with equal amounts of the benzo[d]oxazole-2-thiol ligands, while the corresponding mononuclear complexes (Ir1 and Ir2) are formed at high temperatures. X-ray diffraction analysis shows that the benzo[d]oxazole-2-thiol ligand plays an unusual and interesting bridging role in binuclear complexes and induces rich intermolecular and intramolecular interactions, while in mononuclear complexes, it forms an interesting four-membered ring coordination. More importantly, all complexes experienced efficient deep-red emission in the 628-674 nm range, and the mononuclear complexes have higher luminescent efficiency and longer excited state lifetime than the binuclear complexes. As a result, organic light-emitting diode devices incorporating two mononuclear complexes (Ir1 and Ir2) as guest material of the light-emitting layer can obtain good maximum external quantum efficiency (3.5% and 5.5%) in the deep-red region (629 and 632 nm) with CIE coordinates (0.61, 0.33) and (0.62, 0.34), along with a low turn-on voltage (2.8 V).
- 3 June 2024
- Published by Wiley in Chemistry – A European Journal
- Vol. 30 (39) , e202400927
Robust Radicals Featuring B‐ and N‐Embedded Dioxygen‐Bridged Units: Synthesis, Structures, and Optical Properties
Tris(2,4,6‐trichlorophenyl)methyl (TTM) group has been widely used for constructing organic radicals, but the poor optical stabilities limit the application prospects of the TTM radicals. In this work, the rigid B‐ and N‐embedded dioxygen‐bridged (BO and NO) units were attached to the TTM skeleton as the strong electron‐withdrawing and electron‐donating groups, respectively. The rigidity and strong electronic effect of the BO and NO units contribute to the high chemical and optical stability of BO‐TTM and NO‐TTM radicals. Notably, NO‐TTM exhibits near‐infrared emission at 830 nm with a narrow full width at half maximum (FWHM) of 55 nm (100 meV), while BO‐TTM shows blue‐shifted luminescence at 635 nm and a narrower FWHM of merely 43 nm (130 meV). This study has developed a methodology to produce highly efficient and enduring luminescent radicals, which could tune emission properties such as wavelength and FWHM.
- 3 June 2024
- Published by Wiley in Chemistry – A European Journal
- Vol. 30 (39) , e202400927
Robust Radicals Featuring B‐ and N‐Embedded Dioxygen‐Bridged Units: Synthesis, Structures, and Optical Properties
Tris(2,4,6‐trichlorophenyl)methyl (TTM) group has been widely used for constructing organic radicals, but the poor optical stabilities limit the application prospects of the TTM radicals. In this work, the rigid B‐ and N‐embedded dioxygen‐bridged (BO and NO) units were attached to the TTM skeleton as the strong electron‐withdrawing and electron‐donating groups, respectively. The rigidity and strong electronic effect of the BO and NO units contribute to the high chemical and optical stability of BO‐TTM and NO‐TTM radicals. Notably, NO‐TTM exhibits near‐infrared emission at 830 nm with a narrow full width at half maximum (FWHM) of 55 nm (100 meV), while BO‐TTM shows blue‐shifted luminescence at 635 nm and a narrower FWHM of merely 43 nm (130 meV). This study has developed a methodology to produce highly efficient and enduring luminescent radicals, which could tune emission properties such as wavelength and FWHM.
- 20 December 2023
- Published by Elsevier in Dyes and Pigments
- Vol. 222
Tunable multimode emission induced by charge transfer and multiple resonance effect
- 20 December 2023
- Published by Elsevier in Dyes and Pigments
- Vol. 222
Tunable multimode emission induced by charge transfer and multiple resonance effect