Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Shujie Liu has a total of 30 co-authors. Here are the top co-authors by number of shared publications:

  • Hartmut Hillmer

    University of Kassel

    6 shared publications
  • Mustaqim Siddi Que Iskhandar

    Institute of Nanostructure Technologies & Analytics (INA), University of Kassel

    5 shared publications
  • Philipp Kästner

    Institute of Nanostructure Technologies and Analytics (INA) and Center for Interdisciplinary Nanostructure Science and Technology (CINSaT), University of Kassel, Heinrich-Plett-Str. 40, 34132 Kassel, Germany

    4 shared publications
  • Roland Donatiello

    Institute of Nanostructure Technologies and Analytics (INA) and Center for Interdisciplinary Nanostructure Science and Technology (CINSaT), University of Kassel, Heinrich-Plett-Str. 40, 34132 Kassel, Germany

    4 shared publications
  • Dennis Löber

    Institute of Nanostructure Technologies and Analytics (INA), Technological Electronics Department and Center for Interdisciplinary Nanostructure Science and Technology (CINSaT), University of Kassel, Heinrich-Plett-Straße 40, 34132 Kassel, Germany

    3 shared publications
  • Jiahao Chen

    Institute of Nanostructure Technologies and Analytics (INA), Technological Electronics Department and Center for Interdisciplinary Nanostructure Science and Technology (CINSaT), University of Kassel, Heinrich-Plett-Straße 40, 34132 Kassel, Germany

    3 shared publications

Latest Publications

  • Hyperfast MEMS-Based Microshutter Arrays for Laser Safety Goggles and Security Devices

    by Shujie Liu, Marek Smolarczyk, Kamrul Hasan, Xiaohui Yang, Philipp Kästner, Hartmut Hillmer

  • Open Access

    Homogeneity of Electro-Mechanical and Optical Characteristics in Ring-Shaped MEMS Shutter Arrays with Subfield Addressing for Interference Microscopy

    by Philipp Kästner, Basma Elsaka, Mustaqim Siddi Que Iskhandar, Steffen Liebermann, Roland Donatiello, Shujie Liu, Hartmut Hillmer

    We present a MEMS array-based approach for micro-irises called “ring shutter”, utilizing subfield addressing for applications in advanced micro-optics, such as interference microscopy. This experimental study is focused on investigating the homogeneity of electro-mechanical and optical characteristics within and between subfields of a lab demonstrator device. The characterization aims to ensure crosstalk-free and swift optical performance, as demonstrated in a previous study. For this purpose, the transmission in the initial state, actuation voltages, and response dynamics are measured for each electrode and the entire device, and the results are thoroughly compared. The measurements are conducted by expanding an existing optical actuation setup via tailored 3D-printed apertures, to isolate selected rings and zones. Evaluation of measurement data confirms the stable and crosstalk-free operation of the ring shutter. Both angular and radial homogeneity are robust and follow the expectations in the experiment. While transmission, actuation voltage and closing time slightly rise (up to 25%) with increased radial position represented by five discrete ring sections, the characteristics for different angular zones remain nearly constant. Response times are measured below 40 µs, actuation voltages do not exceed 60 V, and the overall transmission of the ring shutter yields 53.6%.


  • Open Access

    Capacitance–Voltage Studies on Electrostatically Actuated MEMS Micromirror Arrays

    by Jiahao Chen, Xiaohui Yang, Mustaqim Siddi Que Iskhandar, Kamrul Hasan, Shilby Baby, Muhammad Hasnain Qasim, Dennis Löber, Shujie Liu, Roland Donatiello, Steffen Liebermann, et al.

    This article presents the electrostatic actuation performance of micromirror arrays for intelligent active daylight control and energy management in green buildings using a capacitive–voltage (C-V) measurement technique. In order to understand how geometric hinge parameters, initial opening angles, and materials affect the overall efficiency and functionality of the system, micromirror arrays have been analyzed using C-V measurements considering (i) full and broken hinge structures, (ii) 90° and 130° initial tilt angles (Φ), and (iii) different material layer combinations. The measurement results indicate that both an increase in the Young’s modulus of the applied materials and increasing the initial tilt angles increase the threshold voltages during the closing process of the micromirrors.


  • Open Access

    Advancements in MEMS Micromirror and Microshutter Arrays for Light Transmission Through a Substrate

    by Shilby Baby, Mustaqim Siddi Que Iskhandar, Kamrul Hasan, Steffen Liebermann, Jiahao Chen, Hasnain Qasim, Shujie Liu, Eslam Farrag, Dennis Löber, Naureen Ahmed, et al.

    This paper reviews and compares electrostatically actuated MEMS (micro-electro-mechanical system) arrays for light modulation and light steering in which transmission through the substrate is required. A comprehensive comparison of the technical achievements of micromirror arrays and microshutter arrays is provided. The main focus of this paper is MEMS micromirror arrays for smart glass in building windows and façades. This technology utilizes millions of miniaturized and actuatable micromirrors on transparent substrates, enabling use with transmissive substrates such as smart windows for personalized daylight steering, energy saving, and heat management in buildings. For the first time, subfield-addressable MEMS micromirror arrays with an area of nearly 1 m2 are presented. The recent advancements in MEMS smart glass technology for daylight steering are discussed, focusing on aspects like the switching speed, scalability, transmission, lifetime study, and reliability of micromirror arrays. Finally, simulations demonstrating the potential yearly energy savings for investments in MEMS smart glazing are presented, including a comparison to traditional automated external blind systems in a model office room with definite user interactions throughout the year. Additionally, this platform technology with planarized MEMS elements can be used for laser safety goggles to shield pilots, tram, and bus drivers as well as security personal from laser threats, and is also presented in this paper.


  • Open Access

    Homogeneity of Electro-Mechanical and Optical Characteristics in Ring-Shaped MEMS Shutter Arrays with Subfield Addressing for Interference Microscopy

    by Philipp Kästner, Basma Elsaka, Mustaqim Siddi Que Iskhandar, Steffen Liebermann, Roland Donatiello, Shujie Liu, Hartmut Hillmer

    We present a MEMS-array-based approach for micro irises called “ring shutter”, utilizing subfield addressing for applications in advanced micro-optics such as interference microscopy. The study is focused on investigating the homogeneity of electro-mechanical and optical characteristics within and between subfields of a lab demonstrator device. The characterisation aims to ensure cross-talk-free and swift optical performance demonstrated in a previous study. For this purpose, the transmission in the initial state, actuation voltages, and response dynamics are measured per each electrode as well as for the whole device and thoroughly compared. The measurements are conducted by expanding an existing optical actuation setup via tailored 3D-printed apertures al-lowing the isolation of selected rings and zones. Evaluation of measurement data confirms the stable and cross-talk free operation of the ring shutter. Both angular and radial homogeneity are robust and follow the expectations in the experiment. While transmission, actuation voltage and closing time slightly rise (up to 25%) with increased radial position represented by five ring sec-tions A – E, the characteristics for the three angular zones 1 – 3 remain nearly constant. Response times are measured below 40 µs, actuation voltages do not exceed 60 V, and the overall transmis-sion of the ring shutter yields 53.6%.

  • Open Access

    State-of-the-Art Materials Used in MEMS Micromirror Arrays for Photonic Applications

    by Shujie Liu, Philipp Kästner, Roland Donatiello, Anup Shrivastava, Marek Smolarczyk, Mustaqim Siddi Que Iskhandar, Kamrul Hasan, Giuseppe Caruso, Jiahao Chen, Basma Elsaka, et al.

    This work provides an overview on micromirror arrays based on different material systems such as dielectrics, element silicon, compound semiconductors, metals, and novel 2D materials. The goal is to work out the particular strength of each material system to enable optimum performance for various applications. In particular, this review is intended to draw attention to the fact that MEMS micro-mirrors can be successful in many other material systems besides silicon. In particular, the review is intended to draw attention to two material systems that have so far been used less for MEMS micromirror arrays, that have been less researched, and of which fewer applications have been reported to date: metallic heterostructures and 2D materials. However, the main focus is on metallic MEMS micromirror arrays on glass substrates for applications like personalized light steering in buildings via active windows, energy management, active laser safety goggles, interference microscopy, and endoscopy. Finally, the different micromirror arrays are compared with respect to fabrication challenges, switching speed, number of mirrors, mirror dimensions, array sizes, miniaturization potential for individual mirrors, reliability, lifetime, and hinge methodology.


  • Open Access

    Study of Dynamics in Metallic MEMS Cantilevers—Pull-In Voltage and Actuation Speed

    by Xiaohui Yang, Philipp Kästner, Eireen Käkel, Marek Smolarczyk, Shujie Liu, Qingdang Li, Hartmut Hillmer

    For different metals and varying geometries, this paper presents simulations of electrostatically actuated MEMS cantilevers regarding their influence on pull-in voltage and actuation speed. Three-dimensional electromechanical modeling including many non-linearities has been performed to study some static but mainly dynamic features. The results show that the involved parameters have different influences on the actuation speed and pull-in voltage: lower length, higher thickness as well as lower density and higher Young’s modulus of material diminish the actuation time, while longer length, smaller thickness, and smaller Young’s modulus reduce the actuation voltages. Shorter actuation times and smaller actuation voltages cannot be obtained and optimized simultaneously. Different metals such as Au, Ag, Cu, Ti, Ni, Al, W, Cr, Ta, and Mo as well as artificial metals are studied and compared. In this study, Al is found to be the best material for achieving shorter actuation times and smaller actuation voltages. The design rules of MEMS cantilevers are derived considering the large variety of studied parameters. Many involved non-linearities are discussed in detail influencing the MEMS dynamics. Finally, the actuation times are related to the existing experimental actuation times of optical MEMS shutters and MEMS cantilevers.