Xinya Niu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Xinya Niu has a total of 56 co-authors. Here are the top co-authors by number of shared publications:
- Ruy Sebastian Bonilla
Department of Materials University of Oxford Oxford UK
7 shared publications - Shona McNab
UNSW Sydney
3 shared publications - Matthew Wright
Department of Materials, University of Oxford, Oxford, OX1 3PH, UK
2 shared publications - Ailish Wratten
School of Engineering, University of Warwick, Coventry, U.K.
1 shared publication - Anastasia Soeriyadi
School of Photovoltaic and Renewable Energy Engineering, University of New South Wales, Sydney, NSW, Australia
1 shared publication - Audrey Morisset
CSEM, Sustainable Energy Center, Neuchâtel, Switzerland
1 shared publication
Latest Publications
- Open Access
- 15 July 2026
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 20 (29) , 20787-20797
Electrostatic Doping of 2D Semiconductors Using Charged Dielectric Thin Films
Doping two-dimensional (2D) semiconductors without direct chemical or structural modification of the channel remains a central challenge for device integration. Here we demonstrate an electrostatic doping strategy on monolayer MoS2 based on embedding fixed charge in engineered dielectric stacks, enabling carrier modulation in the absence of volatile external bias. By comparing different dielectric architectures, we show that effective electrostatic doping is governed by the defect landscape of the capping dielectrics and their interface with the 2D channel. A self-consistent electrostatic model reveals that interface states control the partitioning of the dielectric embedded charge between carriers trapped in defects or free for conduction in the channel, posing limits to the effectiveness of electrostatic coupling. This work establishes electrostatic doping as a viable strategy for carrier modulation in 2D semiconductors and identifies dielectric defect engineering as central to its implementation.
- 15 July 2026
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 20 (29) , 20787-20797
Open AccessElectrostatic Doping of 2D Semiconductors Using Charged Dielectric Thin Films
Doping two-dimensional (2D) semiconductors without direct chemical or structural modification of the channel remains a central challenge for device integration. Here we demonstrate an electrostatic doping strategy on monolayer MoS2 based on embedding fixed charge in engineered dielectric stacks, enabling carrier modulation in the absence of volatile external bias. By comparing different dielectric architectures, we show that effective electrostatic doping is governed by the defect landscape of the capping dielectrics and their interface with the 2D channel. A self-consistent electrostatic model reveals that interface states control the partitioning of the dielectric embedded charge between carriers trapped in defects or free for conduction in the channel, posing limits to the effectiveness of electrostatic coupling. This work establishes electrostatic doping as a viable strategy for carrier modulation in 2D semiconductors and identifies dielectric defect engineering as central to its implementation.
- 9 July 2026
- Published by American Association for the Advancement of Science (AAAS) in Science
- Vol. 393 (6807) , 200-206
Indium-free perovskite/silicon tandem solar cells with tin oxide recombination layer and electrodes
Indium-based transparent conductive oxides are widely used as electrodes and recombination layers in perovskite/silicon tandem solar cells, yet their scalability is constrained by indium scarcity and sputtering-induced damage. We report high-efficiency and stable indium-free perovskite/silicon tandem solar cells enabled by reactive plasma deposited tin oxide (RPD-SnO x ). For RPD-SnO x as the recombination layer, we achieved a certified efficiency of 33.6%. Fully indium-free tandems that used RPD-SnO x as both recombination layer and electrodes delivered a champion power conversion efficiency of 33.2% (1 square centimeter) and a minimodule with a certified efficiency of 31.0% (207.9 square centimeters). Dense and uniform self-assembled monolayer anchoring enabled by RPD-SnO x suppressed nonradiative recombination and reduced halide migration. Indium-free minimodules exhibited high thermal, damp-heat, and outdoor operational stability and retained 65% of their maximum initial efficiency after 105 days of outdoor operation.
- 9 July 2026
- Published by American Association for the Advancement of Science (AAAS) in Science
- Vol. 393 (6807) , 200-206
Indium-free perovskite/silicon tandem solar cells with tin oxide recombination layer and electrodes
Indium-based transparent conductive oxides are widely used as electrodes and recombination layers in perovskite/silicon tandem solar cells, yet their scalability is constrained by indium scarcity and sputtering-induced damage. We report high-efficiency and stable indium-free perovskite/silicon tandem solar cells enabled by reactive plasma deposited tin oxide (RPD-SnO x ). For RPD-SnO x as the recombination layer, we achieved a certified efficiency of 33.6%. Fully indium-free tandems that used RPD-SnO x as both recombination layer and electrodes delivered a champion power conversion efficiency of 33.2% (1 square centimeter) and a minimodule with a certified efficiency of 31.0% (207.9 square centimeters). Dense and uniform self-assembled monolayer anchoring enabled by RPD-SnO x suppressed nonradiative recombination and reduced halide migration. Indium-free minimodules exhibited high thermal, damp-heat, and outdoor operational stability and retained 65% of their maximum initial efficiency after 105 days of outdoor operation.
- Open Access
- 2 May 2025
- Published by AIP Publishing in APL Electronic Devices
- Vol. 1 (2)
Silicon interface properties of AlOx and SiNx passivation nanolayers under electric field stress
Surface recombination is a primary cause of efficiency losses in silicon solar cells, which can be mitigated through chemical and field-effect passivation. While both mechanisms depend on the fabrication and temperature treatment processes of thin film dielectrics, recent reports show that an external electric field can drastically change the resulting passivation, primarily focusing on high-quality thermal SiO2. This work presents an industrially relevant passivation stack and analyzes the changes in passivation after annealing under an electric field. A low J0s of 45.3 fA/cm2 was demonstrated on a SiOx/AlOx/SiNx stack using a wet chemically grown SiOx and ∼2.5 nm thick AlOx by annealing under positive surface charge. The improved passivation has been attributed to reduced electron capture velocity at the valence band tail. Detailed interface analysis revealed significant modifications on the interface properties, depending on the polarity of the surface charge, the presence of annealing, and the stack structure. It is proposed that hydrogen migration and hot carrier injection near the interface jointly affect the chemical and field-effect passivation. We highlight this strategy to enhance negative charge density in ultra-thin AlOx through a simple extrinsic method, offering a novel solution to the trade-off between effective passivation and limited conductivity in current tunnel oxide passivated contact solar cell (TOPCon) devices.
- 2 May 2025
- Published by AIP Publishing in APL Electronic Devices
- Vol. 1 (2)
Open AccessSilicon interface properties of AlOx and SiNx passivation nanolayers under electric field stress
Surface recombination is a primary cause of efficiency losses in silicon solar cells, which can be mitigated through chemical and field-effect passivation. While both mechanisms depend on the fabrication and temperature treatment processes of thin film dielectrics, recent reports show that an external electric field can drastically change the resulting passivation, primarily focusing on high-quality thermal SiO2. This work presents an industrially relevant passivation stack and analyzes the changes in passivation after annealing under an electric field. A low J0s of 45.3 fA/cm2 was demonstrated on a SiOx/AlOx/SiNx stack using a wet chemically grown SiOx and ∼2.5 nm thick AlOx by annealing under positive surface charge. The improved passivation has been attributed to reduced electron capture velocity at the valence band tail. Detailed interface analysis revealed significant modifications on the interface properties, depending on the polarity of the surface charge, the presence of annealing, and the stack structure. It is proposed that hydrogen migration and hot carrier injection near the interface jointly affect the chemical and field-effect passivation. We highlight this strategy to enhance negative charge density in ultra-thin AlOx through a simple extrinsic method, offering a novel solution to the trade-off between effective passivation and limited conductivity in current tunnel oxide passivated contact solar cell (TOPCon) devices.
- Open Access
- 17 November 2024
- Published by Elsevier in Solar Energy Materials and Solar Cells
- Vol. 280
Oxide-nitride nanolayer stacks for enhanced passivation of p-type surfaces in silicon solar cells
- 17 November 2024
- Published by Elsevier in Solar Energy Materials and Solar Cells
- Vol. 280
Open AccessOxide-nitride nanolayer stacks for enhanced passivation of p-type surfaces in silicon solar cells
- Open Access
- 10 March 2024
- Published by Elsevier in Solar Energy Materials and Solar Cells
- Vol. 269
Enhancing dielectric-silicon interfaces through surface electric fields during firing
- 10 March 2024
- Published by Elsevier in Solar Energy Materials and Solar Cells
- Vol. 269
Open AccessEnhancing dielectric-silicon interfaces through surface electric fields during firing
- Open Access
- 25 December 2023
- Published by AIP Publishing in Applied Physics Letters
- Vol. 123 (26)
Characterization of solar cell passivating contacts using time-of-flight elastic recoil detection analysis
The unambiguous detection of hydrogen in solar cell contact structures is critical to understanding passivation and degradation phenomena. Deuterium is often used to depict the distribution of hydrogen more clearly. However, experimental noise and artifacts can hinder the clear identification of species. This work provides a report of time-of-flight elastic recoil detection (ToF-ERD) analysis to identify H/D contents in a thin poly-Si/SiOx passivating contact. The structure contained a 1.3 nm interfacial SiOx and an n+ doped poly-Si layer with a partly deuterated SiNx coating. The samples were annealed to release H/D, and ToF-ERD was used to detect H/D in monatomic, singly charged forms, without the detection artifacts associated with conventional secondary ion mass spectroscopy. Chlorine ions were used to recoil surface species, which were analyzed to clearly and unambiguously resolve H and D. Depth profiles for the recoiled Si, N, O, D, and H atoms were calculated from the energy and velocity information registered after scattering events, which enabled the analysis of the structure of the multilayer stack. Even though the surface roughness and experimental limitations cause visible broadening of the profiles, which can hinder clear detection at the interfacial oxide, the ability to resolve hydrogen-related species makes ToF-ERD a significant and promising tool for studying the role of hydrogen in the performance and degradation of solar cell passivating contacts.
- 25 December 2023
- Published by AIP Publishing in Applied Physics Letters
- Vol. 123 (26)
Open AccessCharacterization of solar cell passivating contacts using time-of-flight elastic recoil detection analysis
The unambiguous detection of hydrogen in solar cell contact structures is critical to understanding passivation and degradation phenomena. Deuterium is often used to depict the distribution of hydrogen more clearly. However, experimental noise and artifacts can hinder the clear identification of species. This work provides a report of time-of-flight elastic recoil detection (ToF-ERD) analysis to identify H/D contents in a thin poly-Si/SiOx passivating contact. The structure contained a 1.3 nm interfacial SiOx and an n+ doped poly-Si layer with a partly deuterated SiNx coating. The samples were annealed to release H/D, and ToF-ERD was used to detect H/D in monatomic, singly charged forms, without the detection artifacts associated with conventional secondary ion mass spectroscopy. Chlorine ions were used to recoil surface species, which were analyzed to clearly and unambiguously resolve H and D. Depth profiles for the recoiled Si, N, O, D, and H atoms were calculated from the energy and velocity information registered after scattering events, which enabled the analysis of the structure of the multilayer stack. Even though the surface roughness and experimental limitations cause visible broadening of the profiles, which can hinder clear detection at the interfacial oxide, the ability to resolve hydrogen-related species makes ToF-ERD a significant and promising tool for studying the role of hydrogen in the performance and degradation of solar cell passivating contacts.
- 22 December 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Photovoltaics
- Vol. 13 (1) , 22-32
SiNx and AlOx Nanolayers in Hole Selective Passivating Contacts for High Efficiency Silicon Solar Cells
The recombination of photogenerated charge carriers at metal-semiconductor interfaces remains a major source of efficiency loss in photovoltaic cells. Here, we present SiN x and AlO x nanolayers as promising interface dielectrics to enable high efficiency hole selective passivating contacts. It is demonstrated that SiN x deposited via direct plasma enhanced chemical vapour deposition can be grown controllably at thicknesses of 2 nm. The valence band offsets between crystalline silicon and ultrathin AlO x and SiN x nanolayers are measured as 3.5 and 1.4 eV, respectively. This predicts a larger tunnelling current for holes, compared to SiO x used typically. Resistivity measurements show that SiN x and AlO x nanolayers have lower contact resistivities compared to SiO x , with values as low as 100 mΩ·cm 2 . Analysis of the current transport mechanisms confirmed that tunnelling dominates the conduction through SiN x , while a mixture of tunnelling and pinholes are present in the AlO x structure. Lifetime measurements gave initial indications of the passivation quality of the films, with just 10 cycles of AlO x achieving 260 μ s after annealing and 1.9 ms with extrinsic field effect passivation added. Finally, the intrinsic built-in charge in the dielectrics was determined using surface photovoltage measurements and simulations are used to estimate the influence of nanolayer built-in charge in both poly-Si and dopant-free passivating contacts to enable future high efficiency solar cells.
- 22 December 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Photovoltaics
- Vol. 13 (1) , 22-32
SiNx and AlOx Nanolayers in Hole Selective Passivating Contacts for High Efficiency Silicon Solar Cells
The recombination of photogenerated charge carriers at metal-semiconductor interfaces remains a major source of efficiency loss in photovoltaic cells. Here, we present SiN x and AlO x nanolayers as promising interface dielectrics to enable high efficiency hole selective passivating contacts. It is demonstrated that SiN x deposited via direct plasma enhanced chemical vapour deposition can be grown controllably at thicknesses of 2 nm. The valence band offsets between crystalline silicon and ultrathin AlO x and SiN x nanolayers are measured as 3.5 and 1.4 eV, respectively. This predicts a larger tunnelling current for holes, compared to SiO x used typically. Resistivity measurements show that SiN x and AlO x nanolayers have lower contact resistivities compared to SiO x , with values as low as 100 mΩ·cm 2 . Analysis of the current transport mechanisms confirmed that tunnelling dominates the conduction through SiN x , while a mixture of tunnelling and pinholes are present in the AlO x structure. Lifetime measurements gave initial indications of the passivation quality of the films, with just 10 cycles of AlO x achieving 260 μ s after annealing and 1.9 ms with extrinsic field effect passivation added. Finally, the intrinsic built-in charge in the dielectrics was determined using surface photovoltage measurements and simulations are used to estimate the influence of nanolayer built-in charge in both poly-Si and dopant-free passivating contacts to enable future high efficiency solar cells.