Ruslan Iakymenko
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Ruslan Iakymenko has a total of 23 co-authors. Here are the top co-authors by number of shared publications:
- Artem Lutsenko
Bogomolets National Medical University
5 shared publications - Mykyta Lobur
Bogomolets National Medical University
4 shared publications - Oleg Savchuk
Interregional Academy of Personnel Management
4 shared publications - O. Yu. Vovk
Kharkiv National Medical University
2 shared publications - Vasyl Obidniak
Ivano-Frankivsk National Medical University
2 shared publications - Andrii Andriiovych Mykhailov
Bogomolets National Medical University of the Ministry of Health of Ukraine, Kyiv, Ukraine
1 shared publication
Latest Publications
- Open Access
- 5 October 2026
- Published by V. N. Karazin Kharkiv National University in Kharkiv Dental Journal
- Vol. 3 (3(9)) , 701-723
Clinical predictability of intraoral dental scanners in prosthodontic, implant and surgical dentistry: a narrative review
Background. Intraoral dental scanners are a key component of digital dental protocols. At the same time, the accuracy of a digital impression depends on the clinical scenario, scan length, software, scanning strategy, operator experience, and oral health. This determines the need for a clinically differentiated assessment of the technology capabilities and limitations. Purpose – is to critically analyze current scientific data on the clinical predictability of intraoral dental scanners in prosthetic, implant and surgical dentistry, given their accuracy, clinical indications, advantages, and limitations, and to justify the choice of a digital, conventional, or combined impression protocol depending on the clinical scenario. Materials and methods. This is a narrative review with a systematic literature search and PRISMA-oriented source selection. The primary search covered publications in 2015–2025 in PubMed/MEDLINE, Scopus, and Web of Science. An additional updated search for publications in 2026 was conducted on August, 2026. Systematic and narrative reviews, meta-analyses, and clinically and methodologically relevant studies were analyzed. Results. The highest clinical predictability of intraoral scanning is specifically attri-buted to individual restorations, inlays, onlays, veneers, short-span bridges, and partial implant-supported restorations. The risk of error increases in case of full-arch scanning, complete edentulism, insufficient subgingival margin imaging, bleeding, saliva, and mobile mucosa. In case of full-arch implants, the predictability depends on the clinical scenario, scan bodies, scanning strategy, and verification method; under controlled conditions, IOS can provide short-term outcomes comparable to conventional impressions. In surgical dentistry, IOS is the most evidence-based component of an integrated digital workflow together with cone beam computed tomography, planning software, and surgical guides. Conclusions. Intraoral dental scanners do not always replace conventional impressions. The choice of digital, conventional or combined protocol should be based on the clinical scenario, scan length, level of evidence, imaging quality, and risk of error accumulation.
- 5 October 2026
- Published by V. N. Karazin Kharkiv National University in Kharkiv Dental Journal
- Vol. 3 (3(9)) , 701-723
Open AccessClinical predictability of intraoral dental scanners in prosthodontic, implant and surgical dentistry: a narrative review
Background. Intraoral dental scanners are a key component of digital dental protocols. At the same time, the accuracy of a digital impression depends on the clinical scenario, scan length, software, scanning strategy, operator experience, and oral health. This determines the need for a clinically differentiated assessment of the technology capabilities and limitations. Purpose – is to critically analyze current scientific data on the clinical predictability of intraoral dental scanners in prosthetic, implant and surgical dentistry, given their accuracy, clinical indications, advantages, and limitations, and to justify the choice of a digital, conventional, or combined impression protocol depending on the clinical scenario. Materials and methods. This is a narrative review with a systematic literature search and PRISMA-oriented source selection. The primary search covered publications in 2015–2025 in PubMed/MEDLINE, Scopus, and Web of Science. An additional updated search for publications in 2026 was conducted on August, 2026. Systematic and narrative reviews, meta-analyses, and clinically and methodologically relevant studies were analyzed. Results. The highest clinical predictability of intraoral scanning is specifically attri-buted to individual restorations, inlays, onlays, veneers, short-span bridges, and partial implant-supported restorations. The risk of error increases in case of full-arch scanning, complete edentulism, insufficient subgingival margin imaging, bleeding, saliva, and mobile mucosa. In case of full-arch implants, the predictability depends on the clinical scenario, scan bodies, scanning strategy, and verification method; under controlled conditions, IOS can provide short-term outcomes comparable to conventional impressions. In surgical dentistry, IOS is the most evidence-based component of an integrated digital workflow together with cone beam computed tomography, planning software, and surgical guides. Conclusions. Intraoral dental scanners do not always replace conventional impressions. The choice of digital, conventional or combined protocol should be based on the clinical scenario, scan length, level of evidence, imaging quality, and risk of error accumulation.
- Open Access
- 29 September 2026
- Published by Suchasna Stomatolohiya in SUCHASNA STOMATOLOHIYA
- No. 4
Clinical Significance of Ultra-Low Bone Density in Dental Implantation: Does the Misch Classification Require Expansion to Include D5 and D6 Types?
Background. Despite the widespread application of the C. Misch bone quality classification (D1–D4), clinical practice increasingly reveals bone areas of such low density that they fall outside the boundaries of this system. A number of publications and clinical observations informally utilize the categories D5 and D6 to designate these conditions, although they are not officially recognized within the Misch classification. Objective. To analyze current literature data on bone density evaluation in Hounsfield Units (HU), identify the limitations of the Misch classification in the era of broad CT/CBCT diagnostic adoption, and substantiate the clinical rationale for establishing additional D5 and D6 categories to predict the primary stability of dental implants. Materials and Methods. An analytical (narrative) review of publications indexed in the PubMed, Scopus, and Web of Science databases for the period 2010–2025 was conducted, incorporating select landmark historical studies. The search was performed using the keywords: “bone density,” “Hounsfield units,” “dental implant stability,”“poor bone quality,” “Misch classification,” and “primary implant stability.” Results. Bone density values below 150 HU were found to be associated with reduced primary insertion torque (< 15 N · cm), low ISQ values (< 55), and an increased risk of a pronounced stability dip and early implant loss. It was demonstrated that CBCT gray-scale values are not metrologically equivalent to classic CT Hounsfield Units, thereby limiting the reliability of applying fixed threshold values in isolation. A working clinical-radiological classification incorporating D5 (50–150 HU) and D6 (< 50 HU) categories was proposed, which is recommended for application in combination with intraoperative (insertion torque) and functional (ISQ) parameters. Conclusions. Although the D5 and D6 categories are not currently officially recognized, clinical reality indicates a clear need for further refinement of the Misch classification in cases of ultra-low bone density. Prospective multicenter studies are required to validate the proposed categories.
- 29 September 2026
- Published by Suchasna Stomatolohiya in SUCHASNA STOMATOLOHIYA
- No. 4
Open AccessClinical Significance of Ultra-Low Bone Density in Dental Implantation: Does the Misch Classification Require Expansion to Include D5 and D6 Types?
Background. Despite the widespread application of the C. Misch bone quality classification (D1–D4), clinical practice increasingly reveals bone areas of such low density that they fall outside the boundaries of this system. A number of publications and clinical observations informally utilize the categories D5 and D6 to designate these conditions, although they are not officially recognized within the Misch classification. Objective. To analyze current literature data on bone density evaluation in Hounsfield Units (HU), identify the limitations of the Misch classification in the era of broad CT/CBCT diagnostic adoption, and substantiate the clinical rationale for establishing additional D5 and D6 categories to predict the primary stability of dental implants. Materials and Methods. An analytical (narrative) review of publications indexed in the PubMed, Scopus, and Web of Science databases for the period 2010–2025 was conducted, incorporating select landmark historical studies. The search was performed using the keywords: “bone density,” “Hounsfield units,” “dental implant stability,”“poor bone quality,” “Misch classification,” and “primary implant stability.” Results. Bone density values below 150 HU were found to be associated with reduced primary insertion torque (< 15 N · cm), low ISQ values (< 55), and an increased risk of a pronounced stability dip and early implant loss. It was demonstrated that CBCT gray-scale values are not metrologically equivalent to classic CT Hounsfield Units, thereby limiting the reliability of applying fixed threshold values in isolation. A working clinical-radiological classification incorporating D5 (50–150 HU) and D6 (< 50 HU) categories was proposed, which is recommended for application in combination with intraoperative (insertion torque) and functional (ISQ) parameters. Conclusions. Although the D5 and D6 categories are not currently officially recognized, clinical reality indicates a clear need for further refinement of the Misch classification in cases of ultra-low bone density. Prospective multicenter studies are required to validate the proposed categories.
- Open Access
- 30 July 2026
- Published by Suchasna Stomatolohiya in SUCHASNA STOMATOLOHIYA
- No. 3
The Use of Dexamethasone in Maxillofacial Surgery: A Literature Review with Regard to the Ukrainian Experience
Objective — to conduct a systematic analysis of evidence-based data regarding the effectiveness and safety of dexamethasone in the perioperative management of dental implantation. Materials and Methods. A literature search was conducted across PubMed, Scopus, Cochrane Library, and Google Scholar for the period 2013–2024 using the keywords: dexamethasone, dental implant, postoperative pain, swelling, trismus, glucocorticoids. Analyzed parameters included dosages (1–8 mg), routes of administration (oral, intramuscular, intravenous, submucosal, topical), visual analog scale (VAS) pain scores, swelling volume, degree of trismus, and the frequency of adverse events. Results and Discussion. Dexamethasone reduced pain intensity by 30–45%, swelling by 25–43%, and trismus by ~30%. The greatest effect was observed with preoperative administration of 4–8 mg 30–60 minutes prior to implantation. Adverse events were minor (3–5% of cases) and predominantly presented as transient hyperglycemia in patients with diabetes mellitus. Ukrainian clinical data confirm the feasibility of short-term dexamethasone regimens with no negative impact on osteogenesis. Conclusions. Dexamethasone is an effective, safe, and pathogenetic-based component of pharmacological support in dental implantation. A single preoperative dose of 4 mg is optimal for most patients. Conducting Ukrainian multicenter randomized controlled trials (RCTs) is recommended to standardize relevant protocols.
- 30 July 2026
- Published by Suchasna Stomatolohiya in SUCHASNA STOMATOLOHIYA
- No. 3
Open AccessThe Use of Dexamethasone in Maxillofacial Surgery: A Literature Review with Regard to the Ukrainian Experience
Objective — to conduct a systematic analysis of evidence-based data regarding the effectiveness and safety of dexamethasone in the perioperative management of dental implantation. Materials and Methods. A literature search was conducted across PubMed, Scopus, Cochrane Library, and Google Scholar for the period 2013–2024 using the keywords: dexamethasone, dental implant, postoperative pain, swelling, trismus, glucocorticoids. Analyzed parameters included dosages (1–8 mg), routes of administration (oral, intramuscular, intravenous, submucosal, topical), visual analog scale (VAS) pain scores, swelling volume, degree of trismus, and the frequency of adverse events. Results and Discussion. Dexamethasone reduced pain intensity by 30–45%, swelling by 25–43%, and trismus by ~30%. The greatest effect was observed with preoperative administration of 4–8 mg 30–60 minutes prior to implantation. Adverse events were minor (3–5% of cases) and predominantly presented as transient hyperglycemia in patients with diabetes mellitus. Ukrainian clinical data confirm the feasibility of short-term dexamethasone regimens with no negative impact on osteogenesis. Conclusions. Dexamethasone is an effective, safe, and pathogenetic-based component of pharmacological support in dental implantation. A single preoperative dose of 4 mg is optimal for most patients. Conducting Ukrainian multicenter randomized controlled trials (RCTs) is recommended to standardize relevant protocols.
- Open Access
- 30 June 2026
- Published by V. N. Karazin Kharkiv National University in Kharkiv Dental Journal
- Vol. 3 (2(8)) , 282-294
Effectiveness of restoring significantly damaged tooth crowns with endocrowns and modified inlay crowns
Background. Restoration of severely damaged endodontically treated teeth remains an important problem in prosthetic dentistry. Endocrowns and modified inlay/onlay crowns are promising restorative options. Purpose – to compare the effectiveness of restoring severely damaged tooth crowns using endocrowns, modified inlay/onlay crowns, and post-and-core restorations in terms of mechanical strength, microleakage, clinical stability, and restoration survival. Materials and Methods. The study had a combined design and included an in vitro experiment on 120 extracted teeth and a clinical observation of 60 patients with severely damaged posterior teeth. Laboratory assessment included bond strength after thermocycling, microleakage, and failure mode analysis. Clinical performance was evaluated over 12 months, and long-term prognosis was assessed using Kaplan–Meier survival analysis. Statistical analysis was performed using Studentʼs t-test, 2 test, and Pearson correlation analysis at p < 0.05. Results. The highest bond strength was observed for endocrowns (29.1 ± 2.8 MPa), compared with modified inlay/onlay crowns (25.7 ± 2.6 MPa) and post-and-core restorations (21.4 ± 2.9 MPa). Endocrowns also showed the lowest microleakage (1.9 ± 0.4%), whereas modified inlay/onlay crowns and post-and-core restorations showed 2.6 ± 0.5% and 3.2 ± 0.6%, respectively. A significant negative correlation was found between bond strength and microleakage (r = –0.54; p < 0.001). After 12 months, clinical survival rates were 94%, 87%, and 76%, respectively, while predicted 36-month survival rates were 88%, 76%, and 61%. Conclusions. Adhesive restorations demonstrate better biomechanical and clinical performance than traditional post-and-core techniques. Endocrowns showed the most favorable results and may be considered the preferred option for restoring teeth with extensive coronal tissue loss.
- 30 June 2026
- Published by V. N. Karazin Kharkiv National University in Kharkiv Dental Journal
- Vol. 3 (2(8)) , 282-294
Open AccessEffectiveness of restoring significantly damaged tooth crowns with endocrowns and modified inlay crowns
Background. Restoration of severely damaged endodontically treated teeth remains an important problem in prosthetic dentistry. Endocrowns and modified inlay/onlay crowns are promising restorative options. Purpose – to compare the effectiveness of restoring severely damaged tooth crowns using endocrowns, modified inlay/onlay crowns, and post-and-core restorations in terms of mechanical strength, microleakage, clinical stability, and restoration survival. Materials and Methods. The study had a combined design and included an in vitro experiment on 120 extracted teeth and a clinical observation of 60 patients with severely damaged posterior teeth. Laboratory assessment included bond strength after thermocycling, microleakage, and failure mode analysis. Clinical performance was evaluated over 12 months, and long-term prognosis was assessed using Kaplan–Meier survival analysis. Statistical analysis was performed using Studentʼs t-test, 2 test, and Pearson correlation analysis at p < 0.05. Results. The highest bond strength was observed for endocrowns (29.1 ± 2.8 MPa), compared with modified inlay/onlay crowns (25.7 ± 2.6 MPa) and post-and-core restorations (21.4 ± 2.9 MPa). Endocrowns also showed the lowest microleakage (1.9 ± 0.4%), whereas modified inlay/onlay crowns and post-and-core restorations showed 2.6 ± 0.5% and 3.2 ± 0.6%, respectively. A significant negative correlation was found between bond strength and microleakage (r = –0.54; p < 0.001). After 12 months, clinical survival rates were 94%, 87%, and 76%, respectively, while predicted 36-month survival rates were 88%, 76%, and 61%. Conclusions. Adhesive restorations demonstrate better biomechanical and clinical performance than traditional post-and-core techniques. Endocrowns showed the most favorable results and may be considered the preferred option for restoring teeth with extensive coronal tissue loss.
- Open Access
- 30 December 2025
- Published by Individual entrepreneur Kondratets Kateryna in DENTISTRY. MEDICINE. REHABILITATION
- No. 3-4 (3),p. 38-44
Institutional Factors Affecting In-Person Clinical Training of Dental Students During Martial Law
Background. The full-scale war in Ukraine has profoundly transformed higher medical education, particularly in dentistry, where clinical training traditionally depends on direct student–patient interaction. Security-related constraints, resource shortages, disruptions in the operation of clinical facilities, and heightened psychological stress have created significant barriers to high-quality in-person learning. Under these conditions, a comprehensive assessment of institutional factors influencing access to clinical practice, as well as an evaluation of simulation-based training as a compensatory tool, is urgently needed. Objective. To identify institutional, organizational, and psycho-emotional factors that determine the accessibility and effectiveness of in-person clinical training for dental students during martial law, and to assess the role of simulation-based learning in developing clinical competencies under restricted patient access. Materials and Methods. A cross-sectional anonymous online survey was conducted among dental students (n = 103) using the Google Forms platform. The questionnaire comprised sections on: accessibility of clinical facilities; barriers to participation in in-person practice; subjective evaluation of simulation-based training; perceived need for its intensification; and students’ psycho-emotional state during wartime. Data were analyzed using descriptive statistics, with results presented in pie and bar charts. Results. The findings revealed alarmingly low regular access to clinical practice: only 4.8% of students consistently attended clinical facilities. For most students (71.4%), access was partial, while 9.5% reported complete absence of access. The leading institutional and organizational barriers included security concerns (61.9%), insufficient material and technical resources (57.1%), shortage of patients or clinical cases (52.4%), suboptimal scheduling (42.9%), and logistical difficulties such as geographical distance (28.6%). Conclusions. In-person clinical training for dental students during martial law is critically constrained by institutional and security factors, resulting in reduced accessibility and disrupted regularity of practice (with only 4.8% of students maintaining stable patient access). Under these circumstances, simulation-based learning emerges as a key compensatory tool for preserving essential manual skills; however, it requires further institutional support and modernization of educational infrastructure.
- 30 December 2025
- Published by Individual entrepreneur Kondratets Kateryna in DENTISTRY. MEDICINE. REHABILITATION
- No. 3-4 (3),p. 38-44
Open AccessInstitutional Factors Affecting In-Person Clinical Training of Dental Students During Martial Law
Background. The full-scale war in Ukraine has profoundly transformed higher medical education, particularly in dentistry, where clinical training traditionally depends on direct student–patient interaction. Security-related constraints, resource shortages, disruptions in the operation of clinical facilities, and heightened psychological stress have created significant barriers to high-quality in-person learning. Under these conditions, a comprehensive assessment of institutional factors influencing access to clinical practice, as well as an evaluation of simulation-based training as a compensatory tool, is urgently needed. Objective. To identify institutional, organizational, and psycho-emotional factors that determine the accessibility and effectiveness of in-person clinical training for dental students during martial law, and to assess the role of simulation-based learning in developing clinical competencies under restricted patient access. Materials and Methods. A cross-sectional anonymous online survey was conducted among dental students (n = 103) using the Google Forms platform. The questionnaire comprised sections on: accessibility of clinical facilities; barriers to participation in in-person practice; subjective evaluation of simulation-based training; perceived need for its intensification; and students’ psycho-emotional state during wartime. Data were analyzed using descriptive statistics, with results presented in pie and bar charts. Results. The findings revealed alarmingly low regular access to clinical practice: only 4.8% of students consistently attended clinical facilities. For most students (71.4%), access was partial, while 9.5% reported complete absence of access. The leading institutional and organizational barriers included security concerns (61.9%), insufficient material and technical resources (57.1%), shortage of patients or clinical cases (52.4%), suboptimal scheduling (42.9%), and logistical difficulties such as geographical distance (28.6%). Conclusions. In-person clinical training for dental students during martial law is critically constrained by institutional and security factors, resulting in reduced accessibility and disrupted regularity of practice (with only 4.8% of students maintaining stable patient access). Under these circumstances, simulation-based learning emerges as a key compensatory tool for preserving essential manual skills; however, it requires further institutional support and modernization of educational infrastructure.
- 29 December 2025
- Published by Interregional Academy of Personnel Management in Modern medicine, pharmacy and psychological health
- No. 3(21),p. 151-154
COMPLEX INTERDISCIPLINARY CASES AS A TOOL FOR FORMING CLINICAL THINKING IN DENTAL STUDENTS
- 29 December 2025
- Published by Interregional Academy of Personnel Management in Modern medicine, pharmacy and psychological health
- No. 3(21),p. 151-154
COMPLEX INTERDISCIPLINARY CASES AS A TOOL FOR FORMING CLINICAL THINKING IN DENTAL STUDENTS
- Open Access
- 16 July 2024
- Published by Private Company Technology Center in ScienceRise: Medical Science
- No. 2(59),p. 22-29
Peculiarities of the shape and size of the mandible and the lower dentition with taking into account gender and craniotype
The aim of the study: establishment of actual intravital craniometric characteristics of the shape and dimensions of the mandible and lower dentition of an adult person depending on gender and craniotype. Research materials and methods: the work used dry bone preparations of whole or fragmented human skulls of both sexes in the amount of 39 units, from the collection of the Department of Human Anatomy of the Kharkiv National Medical University, and the results of CT studies of the head of adult people without existing bone tissue pathologies, totaling 85 observations. The basis of establishing a craniotype is the principle of calculating the general facial or facial index, which allows classifying anatomical objects according to the shape of the head structure. Research results: the straight length of the mandible in adult leptoprosops males is from 88.5 mm to 102.4 mm, for women - from 86.3 mm to 100.7 mm; in mesoprosops men, this parameter gradually decreases to the level - from 81.3 mm to 95.7 mm, in women - from 80.7 mm to 94.9 mm; in euryprosops, the index is the smallest and ranges from 79.7 mm to 91.5 mm in males and from 78.5 mm to 90.8 mm in females. The opposite trend with significant ranges of variation is established for the angular width of the bone. Thus, in male leptoprosops, this parameter was determined from 84.6 mm to 97.5 mm, in female representatives - from 83.6 mm to 96.3 mm; in mesoprosops men, it increased from 89.1 mm to 105.3 mm, in women - from 87.9 mm to 103.1 mm; in euryprosops, regardless of sex, it reached its peak values, from 94.5 mm to 116.1 mm and from 92.7 mm to 114.1 mm, respectively. The height of the mandibular body also showed a certain dependence on the type of skull structure, in leptoprosops men it tended to the highest values and was fixed at the level from 29.1 mm to 38.9 mm, as well as in women - from 27.5 mm to 37.8 mm; at the same time, in mesoprosops men, the size decreased from 25.9 mm to 36.3 mm, in women, in turn, from 24.6 mm to 35.1 mm; in euryprosops men, this parameter ranged from 22.3 mm to 33.1 mm, and next to women - from 21.9 mm to 31.9 mm, it was at the level of the lowest indicators. When analyzing such a complex and multidirectional parameter as the arch of the mandible, it was also possible to obtain a characteristic of its dependence on the type of structure of the facial department of the skull. It was established that the range with the smallest values of the length of the arc is characteristic of leptoprosops, ranging from 135.8 mm to 149.4 mm in males and from 133.5 mm to 147.3 mm in females; average indices are characteristic of men - from 139.1 mm to 154.6 mm and women - from 136.4 mm to 151.2 mm with a mesoprosopic craniotype; in euryprosops of both sexes, the index tends to the greatest values at the level of 141.2 mm to 158.3 mm and from 139.7 mm to 155.7 mm, respectively. Conclusions: the main craniometric parameters of the mandible are significantly dependent on the type of structure of the facial department of the skull. Thus, the leptoprosopic craniotype is characterized by maximum values of longitudinal and height dimensions with minimal indicators of width and arc length. Mesoprosops are characterized by the definition of intermediate, averaged values equidistant from marginal, terminal forms. In representatives with the euryprosopic type of skull structure, a significant decrease in the length and height of the jaw with a significant increase, up to the maximum values, width and length of the arch was observed. At the same time, unlike leptoprosops, which had a shortened and pointed arch, in euryprosops, the arch tended to be smoothed and lengthened. The assessment by sex leads to the fact that all sizes of the lower jaw predominate in men, but, nevertheless, a certain number of differences in indicators were within the limits of statistical error, which does not allow making absolute conclusions in this matter
- 16 July 2024
- Published by Private Company Technology Center in ScienceRise: Medical Science
- No. 2(59),p. 22-29
Open AccessPeculiarities of the shape and size of the mandible and the lower dentition with taking into account gender and craniotype
The aim of the study: establishment of actual intravital craniometric characteristics of the shape and dimensions of the mandible and lower dentition of an adult person depending on gender and craniotype. Research materials and methods: the work used dry bone preparations of whole or fragmented human skulls of both sexes in the amount of 39 units, from the collection of the Department of Human Anatomy of the Kharkiv National Medical University, and the results of CT studies of the head of adult people without existing bone tissue pathologies, totaling 85 observations. The basis of establishing a craniotype is the principle of calculating the general facial or facial index, which allows classifying anatomical objects according to the shape of the head structure. Research results: the straight length of the mandible in adult leptoprosops males is from 88.5 mm to 102.4 mm, for women - from 86.3 mm to 100.7 mm; in mesoprosops men, this parameter gradually decreases to the level - from 81.3 mm to 95.7 mm, in women - from 80.7 mm to 94.9 mm; in euryprosops, the index is the smallest and ranges from 79.7 mm to 91.5 mm in males and from 78.5 mm to 90.8 mm in females. The opposite trend with significant ranges of variation is established for the angular width of the bone. Thus, in male leptoprosops, this parameter was determined from 84.6 mm to 97.5 mm, in female representatives - from 83.6 mm to 96.3 mm; in mesoprosops men, it increased from 89.1 mm to 105.3 mm, in women - from 87.9 mm to 103.1 mm; in euryprosops, regardless of sex, it reached its peak values, from 94.5 mm to 116.1 mm and from 92.7 mm to 114.1 mm, respectively. The height of the mandibular body also showed a certain dependence on the type of skull structure, in leptoprosops men it tended to the highest values and was fixed at the level from 29.1 mm to 38.9 mm, as well as in women - from 27.5 mm to 37.8 mm; at the same time, in mesoprosops men, the size decreased from 25.9 mm to 36.3 mm, in women, in turn, from 24.6 mm to 35.1 mm; in euryprosops men, this parameter ranged from 22.3 mm to 33.1 mm, and next to women - from 21.9 mm to 31.9 mm, it was at the level of the lowest indicators. When analyzing such a complex and multidirectional parameter as the arch of the mandible, it was also possible to obtain a characteristic of its dependence on the type of structure of the facial department of the skull. It was established that the range with the smallest values of the length of the arc is characteristic of leptoprosops, ranging from 135.8 mm to 149.4 mm in males and from 133.5 mm to 147.3 mm in females; average indices are characteristic of men - from 139.1 mm to 154.6 mm and women - from 136.4 mm to 151.2 mm with a mesoprosopic craniotype; in euryprosops of both sexes, the index tends to the greatest values at the level of 141.2 mm to 158.3 mm and from 139.7 mm to 155.7 mm, respectively. Conclusions: the main craniometric parameters of the mandible are significantly dependent on the type of structure of the facial department of the skull. Thus, the leptoprosopic craniotype is characterized by maximum values of longitudinal and height dimensions with minimal indicators of width and arc length. Mesoprosops are characterized by the definition of intermediate, averaged values equidistant from marginal, terminal forms. In representatives with the euryprosopic type of skull structure, a significant decrease in the length and height of the jaw with a significant increase, up to the maximum values, width and length of the arch was observed. At the same time, unlike leptoprosops, which had a shortened and pointed arch, in euryprosops, the arch tended to be smoothed and lengthened. The assessment by sex leads to the fact that all sizes of the lower jaw predominate in men, but, nevertheless, a certain number of differences in indicators were within the limits of statistical error, which does not allow making absolute conclusions in this matter
- Open Access
- 24 December 2022
- Published by Vinnytsia National Pyrogov Memorial Medical University in Reports of Vinnytsia National Medical University
- Vol. 26 (4) , 534-539
Determination of the position of the openings of the facial part of the skull in relation to craniological points and bony landmarks depending on the facial index of a person of mature age
Annotation. Knowing the exact position of the openings in the facial part of the skull, through which vessels and nerves pass, is extremely important for performing operative, reconstructive and other interventions in this area. Since there is considerable variability in the position of the supraorbital (SOH), infraorbital (IOH) and submental (SMOH) holes, the purpose of our work is to determine the exact spatial position of the above-mentioned holes relative to cranial points and bony landmarks depending on the facial index of a mature person. Studies were conducted on 52 bone preparations of skulls using commonly accepted instruments and 60 CT images of mature Caucasians without pathology of the bones of the facial part of the skull. Studies on CT images were carried out using a virtual Anatomage table using the Launching Table 6.0 Application program. Statistical methods were used to analyze the obtained measurement results in our research, which was carried out with the help of the Microsoft Excel 2010 © licensed program package and with the help of the “STATISTYCA” program. To determine the interdependence of features in the general population, a correlation analysis was performed. In the course of the study, we determined the average values of the distances from the SOH, IOH and SMOH to the following craniological points: nasion (n.), nasospinale (ns) and frontomalare orbitale (fmo) depending on the facial index. Analyzing the obtained data, significant differences in the position of the above-mentioned openings to the corresponding craniological points were clearly observed depending on the type of structure of the facial part of the skull. There was an increase in the distances from the SOH and IOH to the nasion point and the frontmolar orbital point in euryprosopics, and smaller results were obtained in leptoprosopics. The average values of the distance indicators from the SOH, IOH and SMOH to the nasolabial point were significantly larger in leptoprosopics, in contrast to euryprosopics. When determining the size of the supraorbital margin and the distance from the SOH to the supraorbital margin, euryprosopics prevailed. The obtained results of measuring the distance from the IOH to the edge of the upper jaw and from the SMOH to the upper and lower edges of the lower jaw indicate an increase in these distances in long-faced (leptoprosopic) in contrast to wide-faced (euryprosopic). The results of the study indicate the dependence of the position of the openings of the facial part of the skull on the facial index, which will make it easier in clinical practice to determine the position of the nerves and vessels coming out of these openings.
- 24 December 2022
- Published by Vinnytsia National Pyrogov Memorial Medical University in Reports of Vinnytsia National Medical University
- Vol. 26 (4) , 534-539
Open AccessDetermination of the position of the openings of the facial part of the skull in relation to craniological points and bony landmarks depending on the facial index of a person of mature age
Annotation. Knowing the exact position of the openings in the facial part of the skull, through which vessels and nerves pass, is extremely important for performing operative, reconstructive and other interventions in this area. Since there is considerable variability in the position of the supraorbital (SOH), infraorbital (IOH) and submental (SMOH) holes, the purpose of our work is to determine the exact spatial position of the above-mentioned holes relative to cranial points and bony landmarks depending on the facial index of a mature person. Studies were conducted on 52 bone preparations of skulls using commonly accepted instruments and 60 CT images of mature Caucasians without pathology of the bones of the facial part of the skull. Studies on CT images were carried out using a virtual Anatomage table using the Launching Table 6.0 Application program. Statistical methods were used to analyze the obtained measurement results in our research, which was carried out with the help of the Microsoft Excel 2010 © licensed program package and with the help of the “STATISTYCA” program. To determine the interdependence of features in the general population, a correlation analysis was performed. In the course of the study, we determined the average values of the distances from the SOH, IOH and SMOH to the following craniological points: nasion (n.), nasospinale (ns) and frontomalare orbitale (fmo) depending on the facial index. Analyzing the obtained data, significant differences in the position of the above-mentioned openings to the corresponding craniological points were clearly observed depending on the type of structure of the facial part of the skull. There was an increase in the distances from the SOH and IOH to the nasion point and the frontmolar orbital point in euryprosopics, and smaller results were obtained in leptoprosopics. The average values of the distance indicators from the SOH, IOH and SMOH to the nasolabial point were significantly larger in leptoprosopics, in contrast to euryprosopics. When determining the size of the supraorbital margin and the distance from the SOH to the supraorbital margin, euryprosopics prevailed. The obtained results of measuring the distance from the IOH to the edge of the upper jaw and from the SMOH to the upper and lower edges of the lower jaw indicate an increase in these distances in long-faced (leptoprosopic) in contrast to wide-faced (euryprosopic). The results of the study indicate the dependence of the position of the openings of the facial part of the skull on the facial index, which will make it easier in clinical practice to determine the position of the nerves and vessels coming out of these openings.