HAHakeem Ademola Adeoye

Hakeem Ademola Adeoye

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Hakeem Ademola Adeoye has a total of 6 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Design and Simulations of RT Na-S Battery/Supercapacitor Energy Storage Systems Integrated in Grid/Microgrid with Renewables

    by Hakeem Ademola Adeoye, Mona Elghzal, Constantina Lekakou

    A sustainable non-lithium battery is proposed, integrated with renewables to cater for the intermittency and differences between daily supply and demand. A room temperature sodium–sulfur (RT Na-S) battery presented in this study offers a promising energy density of 177 Wh/kg of the pouch cell. A framework is introduced for the design of an RT Na-S battery system, alone and combined with a supercapacitor, and its operating schedule for two case studies: (a) a photovoltaic (PV) system for a household and (b) a wind turbine for an industrial site. Daily power supply and demand profiles are included in both cases. In the first design step, the required mass and volume of the battery cells are determined. In the second step, the system architecture is designed, and simulations of the renewable-energy storage system–demand are carried out for four consecutive days. An RT Na-S battery–supercapacitor system is recommended in association with the wind turbine that involves high frequency and high power pulses, where the supercapacitor caters for power exceeding 0.1 C. A standalone RT Na-S battery is recommended for the PV system. The simulations predicted that each storage system covered all the net power and energy demands without any contributions from the grid.


  • Open Access

    An Investigation into Electrolytes and Cathodes for Room-Temperature Sodium–Sulfur Batteries

    by Hakeem Ademola Adeoye, Stephen Tennison, John F. Watts, Constantina Lekakou

    In the pursuit of high energy density batteries beyond lithium, room-temperature (RT) sodium–sulfur (Na-S) batteries are studied, combining sulfur, as a high energy density active cathode material and a sodium anode considered to offer high energy density and very good standard potential. Different liquid electrolyte systems, including three different salts and two different solvents, are investigated in RT Na-S battery cells, on the basis of the solubility of sulfur and sulfides, specific capacity, and cyclability of the cells at different C-rates. Two alternative cathode host materials are explored: A bimodal pore size distribution activated carbon host AC MSC30 and a highly conductive carbon host of hollow particles with porous particle walls. An Na-S cell with a cathode coating with 44 wt% sulfur in the AC MSC30 host and the electrolyte 1M NaFSI in DOL/DME exhibited a specific capacity of 435 mAh/gS but poor cyclability. An Na-S cell with a cathode coating with 44 wt% sulfur in the host of hollow porous particles and the electrolyte 1M NaTFSI in TEGDME exhibited a specific capacity of 688 mAh/gS.


  • Open Access

    Solubility and dissolution kinetics of sulfur and sulfides in electrolyte solvents for lithium–sulfur and sodium–sulfur batteries

    by Hakeem A. Adeoye, Matthew J. Dent, John F. Watts, Stephen Tennison, Constantina Lekakou

    In this study, we monitor the dissolution of sulfur and sulfides in electrolyte solvents for lithium-sulfur (Li-S) and sodium-sulfur (Na-S) batteries. The first aim of this research is to assemble a comprehensive set of data of solubilities and dissolution kinetics that may be used in the simulation of battery cycling. The investigation also offers important insights to address key bottlenecks in the development and commercialization of metal-sulfur batteries, including the incomplete dissolution of sulfur in discharge and insoluble low-order sulfides in charge, the probability of shuttling of soluble polysulfides, and pausing of the redox reactions in precipitated low order sulfides depending on their degree of solid state. The tested materials include sulfur, lithium sulfides Li2Sx, x=1,2,4,6,8, and sodium sulfides Na2Sx, x=1,2,3,4,6,8, dissolved in two alternative electrolyte solvents: DOL:DME 1:1 v/v and TEGDME. The determined properties of the solute dissolution in the solvent include saturation concentration, mass transfer coefficient and diffusion coefficient of the solvent in the solid solute. In general, the DOL:DME system offers high solubility in Li-S batteries and TEGDME offers the highest solubility in Na-S batteries. Low solubility sulfides are Li2S2 and Li2S for the Li-S batteries, and Na2S3, Na2S2 and Na2S for the Na-S batteries. However, it is noted that Na2S3 dissolves fast in TEGDME and also TEGDME diffuses fast into Na2S3, offering the possibility of swollen Na2S3 structure in which Na+ ions might diffuse and continue the redox reactions in semisolid state.