YFYizhe Fan

Yizhe Fan

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Yizhe Fan has a total of 27 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Dual-wavelength DFB lasers based on continuous-phase-shift gratings for MMW/THz photomixing

    by Zhefan Wang, Yiming Sun, Mohanad Al-Rubaiee, Ahmet Seckin Hezarfen, Yizhe Fan, Simeng Zhu, Bocheng Yuan, Weiwei Huang, Xiao Sun, John H. Marsh, et al.

    We demonstrate five dual-wavelength DFB lasers based on continuous-phase-shift gratings (CPSGs). The CPSG design preserves an effective coupling coefficient comparable to that of uniform Bragg gratings, while enabling deterministic control of the dual-mode spacing via a global phase ramp implemented in a single lithography step. Beat-note spacings ranging from 50 GHz to 1 THz are achieved, with dual‑mode operation exhibiting a side‑mode suppression ratio (SMSR) above 33 dB over a DFB drive current range exceeding 40 mA, albeit with increased threshold and reduced slope efficiency for the smallest 50 GHz spacing. These results establish CPSG-based dual-wavelength DFB lasers as compact optical beat sources for millimeter-wave/THz photomixing and heterodyne systems.


  • Monolithic Multi-Wavelength Mode-Locked DFB Laser Using Chirped Conventional and Four-Phase-Shifted Sampled Bragg Gratings

    by Mohanad Al-Rubaiee, Yizhe Fan, Bocheng Yuan, Yiming Sun, Simeng Zhu, Ahmet Seckin, Zhefan Wang, Xiao Sun, John Marsh, Stephen J. Sweeney, et al.

    We report, for the first time, a monolithic multi-wavelength passively mode-locked distributed feedback (DFB) laser operating simultaneously at four wavelengths near $1.55~\mu $ m. The device incorporates two chirped sampled Bragg grating (SBG) designs within a single cavity: 1) chirped conventional SBG (C-SBG) and 2) chirped four-phase-shifted SBG (4PS-SBG). Both configurations achieve uniform 0.96 nm (~120 GHz) wavelength spacing using a single DFB section electrode and monolithically integrated saturable absorber (SA) for synchronized passive mode-locking. This shared-cavity architecture ensures intrinsic stability of the frequency comb against environmental perturbations, as all longitudinal modes experience identical phase variations. The lasers exhibit high spectral purity with side-mode suppression ratios (SMSR) >20 dB, with the 4PS-SBG design offering wider bias current operation. Pulse characteristics include near-transform-limited performance for both designs: C-SBG yields 2.84 ps pulses (time-bandwidth product [TBP] = 0.334), while 4PS-SBG generates 2.79 ps pulses (TBP = 0.337). Fabrication employs a simplified ridge waveguide sidewall grating approach requiring only one metalorganic vapor phase epitaxy (MOVPE) step and a single III–V etch process, enhancing manufacturability. We further demonstrate the design’s versatility by extending operation to six wavelengths using the 4PS-SBG structure. This integrated platform shows strong potential for dense wavelength division multiplexing (DWDM), coherent communications, and photonic sensing applications requiring compact, environmentally stable multi-wavelength sources.


  • Mode-Locked DBR and DFB Lasers With Multiple Phase-Shifted Gratings for THz Generation

    by Yizhe Fan, Mohanad Al-Rubaiee, Simeng Zhu, Bocheng Yuan, Xiao Sun, Yiming Sun, Anthony E. Kelly, John H. Marsh, Lianping Hou

    We propose mode-locked distributed Bragg reflector (DBR) and distributed feedback (DFB) lasers based on multiple phase-shift gratings (MPSGs) for terahertz (THz) signal generation, with the latter incorporating an equivalent π-phase shift. By integrating optimized MPSGs, we achieve multi-channel lasing with uniform reflectivity and dense channel spacing. Mode-locked DBR lasers operating at THz frequencies of 150 GHz, 400 GHz, 800 GHz, and 1.2 THz have been demonstrated, as confirmed by second harmonic generation measurements. Additionally, a 200 GHz mode-locked DFB laser was realized. Amplified by an erbium-doped fiber amplifier (EDFA), the mode-locked DFB laser output was injected into a photoconductive antenna (PCA) to generate THz signals, with the measured power reaching 19.6 μW. These results highlight the potential of MPSG-based mode-locked lasers for compact and efficient THz generation systems.


  • Open Access

    Simultaneous multi-wavelength mode-locked DFB laser based on waveguide Bragg grating microcavities

    by Mohanad Al-Rubaiee, Xiao Sun, Bocheng Yuan, Yizhe Fan, Simeng Zhu, Yiming Sun, John H. Marsh, Stephen J. Sweeney, Lianping Hou

    We demonstrate, for the first time to the best of our knowledge, a monolithic multi-wavelength mode-locked distributed feedback (DFB) laser based on waveguide Bragg grating microcavities, achieving simultaneous three-wavelength lasing near 1.55 μm within a single cavity. The device exhibits a uniform free spectral range of 0.46 nm (57.4 GHz), a side mode suppression ratio exceeding 30 dB, and near-transform-limited pulses (6.25 ps, time-bandwidth product = 0.359). The structure requires only one metalorganic vapor phase epitaxy growth and a single III-V material dry etching step, significantly simplifying fabrication and enhancing reproducibility. By halving and doubling the central cavity length, we also demonstrate dual- and six-wavelength operation with free spectral ranges of 0.75 nm and 0.27 nm, respectively highlighting the design versatility in tailoring the channel count and repetition frequency. This compact platform enables seamless photonic integration with semiconductor optical amplifiers, electroabsorption modulators, and other on-chip components, making it suitable for dense wavelength division multiplexing, coherent optical communications, and photonic sensing.


  • Open Access

    Continuous phase modulation technology based on grating period interval for high grating coupling coefficient and precise wavelength control

    by Yiming Sun, Simeng Zhu, Bocheng Yuan, Yizhe Fan, Mohanad Al-Rubaiee, Xiao Sun, John H. Marsh, Stephen J. Sweeney, Lianping Hou

    A novel, to the best of our knowledge, grating modulation technique for distributed feedback laser arrays is proposed and demonstrated. This method modifies the initial phase within each grating period, applying a total phase shift that increments in an arithmetic progression, realizing laser arrays with channel spacings of 0.493 nm, 0.949 nm, and 1.956 nm. This method maintains a coupling coefficient comparable to traditional uniform grating structures. Furthermore, the continuous phase modulation enhances the stability of the lasing wavelength of the primary mode, reducing sensitivity to fabrication errors. This improved tolerance to manufacturing inaccuracies represents a significant technological advancement, making this approach highly promising for applications requiring precise and stable wavelength control.


  • Open Access

    Multi-wavelength DFB laser based on a sidewall third-order four phase-shifted sampled Bragg grating with uniform wavelength spacing

    by Xiao Sun, Zhibo Li, Yizhe Fan, Mohanad Jamal Al-Rubaiee, John H. Marsh, Anthony E. Kelly, Stephen J. Sweeney, Lianping Hou

    We present the first, to our knowledge, demonstration of a 1550 nm multi-wavelength distributed feedback (MW-DFB) laser employing a third-order, four-phase-shifted sampled sidewall grating. By utilizing linearly chirped sampled gratings and incorporating multiple true π-phase shifts within a cavity, we achieved and experimentally validated a four-wavelength laser with a channel spacing of 0.4 nm. The device operates stably and uniformly across a wide range of injection currents from 280 mA to 350 mA. The average wavelength spacing was measured at 0.401 nm with a standard deviation of 0.0081 nm. Additionally, we demonstrated a 0.3 nm MW-DFB laser with a seven-channel output, achieving a wavelength spacing of 0.274 nm and a standard deviation of 0.0055 nm. This MW-DFB laser features a ridge waveguide with sidewall gratings, requiring only one metalorganic vapor-phase epitaxy (MOVPE) step and a single III–V material etching process. This streamlined fabrication approach simplifies device manufacturing and is well-suited for dense wavelength division multiplexing (DWDM) systems.


  • Open Access

    Narrow linewidth distributed feedback lasers utilizing distributed phase shift

    by Yiming Sun, Bocheng Yuan, Xiao Sun, Simeng Zhu, Yizhe Fan, Mohanad Al-Rubaiee, John H. Marsh, Stephen J. Sweeney, Lianping Hou

    This study proposes and experimentally demonstrates a distributed feedback (DFB) laser with a distributed phase shift (DPS) region at the center of the DFB cavity. By modeling the field intensity distribution in the cavity and the output spectrum, the DPS region length and phase shift values have been optimized. Experimental comparisons with lasers using traditional π-phase shifts confirm that DFB lasers with optimized DPS lengths and larger phase shifts (up to 15π) achieve stable single longitudinal mode operation over a broader current range, with lower threshold current, higher power slope efficiency, and a higher side mode suppression ratio (SMSR). Furthermore, the minimum optical linewidth is reduced significantly, from 1.3 MHz to 220 kHz.


  • Dual-Band Photonic Filters With Wide Tunable Range Using Chirped Sampled Gratings

    by Simeng Zhu, Bocheng Yuan, Weiqing Cheng, Yizhe Fan, Yiming Sun, Mohanad Al-Rubaiee, Jehan Akbar, John Marsh, Lianping Hou

    We have developed a photonic filter featuring dual independently tunable passbands. Employing the reconstruction equivalent-chirp technique, we designed linearly chirped sampled Bragg gratings with two equivalent phase shifts positioned at 1/3 and 2/3 of the cavity, thus introducing two passbands in the +1 st channel. Leveraging the significant thermo-optic effect of silicon, dual-band tuning is achieved via micro-heaters integrated on the chip surface. By tuning the injection currents ranging from 0 to 35 mA into the micro-heaters, the filter exhibits a wide range of dual-wavelength filtering performance, with the frequency interval between the two passbands adjustable from 37.2 GHz to 186.1 GHz.


  • Ultrastable 10 GHz Mode-Locked Laser on Semi-Insulating Substrate Through RF Injection Locking

    by Mohanad Al-Rubaiee, Bocheng Yuan, Yizhe Fan, Simeng Zhu, John Marsh, Lianping Hou

    We have developed a passive semiconductor mode-locked laser on a semi-insulating (S.I.) substrate, which significantly reduces parasitic capacitance. This allows for efficient direct modulation and improved performance, making it ideal for RF fundamental and subharmonic injection locking using a Ground-Signal-Ground probe with relatively lower RF power to reduce timing jitter. Hybrid mode-locking was observed at RF powers as low as –20 dBm for the fundamental frequency, with higher power required for subharmonic frequencies. Experimental results demonstrate significant performance improvements, including linewidth reduction from 40 kHz (free-running laser) to sub-hertz levels after RF fundamental injection locking, phase noise reduction by over 40 dBc/Hz at a 10 kHz offset, and a decrease in timing jitter from 7.2 ps to approximately 80 fs with an injected fundamental RF power of –5 dBm. Subharmonic injection locking offers simplified modulation requirements and circuitry, although it requires a higher injection RF power. These significant improvements highlight the potential of our approach for advanced optical communication and optical clock systems.


  • Monolithic Dual Wavelength DFB Lasers Based on Sidewall Gratings for THz/MMW Signal Generation

    by Lianping Hou, Bocheng Yuan, Yizhe Fan, Xiao Sun, Yiming Sun, Simeng Zhu, Stephen J. Sweeney, John H. Marsh

    We have developed a series of dual-wavelength DFB lasers (DWLs) based on different sidewall grating designs. These include DWLs utilizing uniform Bragg gratings (UBG), conventional sampled Bragg gratings (C-SBG), two-phase shifted sampled Bragg gratings (2PS-SBG), and four-phase shifted sampled Bragg gratings (4PS-SBG) for THz signal generation. Additionally, we have explored the use of 4PS-SBG combined with equivalent chirp technology, lateral modulation of the grating coupling coefficient κ, and four-phase-shifted sampled Moiré gratings (4PS-SMG) for millimeter-wave (MMW) signal generation. All the DWLs were fabricated in the AlGaInAs/InP system operating around 1550 nm. For DWLs using UBG, even employing e-beam lithography at its resolution limit of 0.5 nm, the smallest frequency separation is constrained to approximately 400 GHz. C-SBG designs allow precise control of the frequency separation, down to 1.1 GHz, but the effective grating coupling coefficient is only 1/π of that of UBG. Utilizing 2PS-SBG technology can automatically produce DWLs while maintaining the same sampling periods on both sides of the ridge waveguide. The 4PS-SBG demonstrates a higher effective κ (approximately 0.9x that of UBG) compared to the 2PS-SBG (approximately 0.64x that of UBG). To ensure single longitudinal mode operation and mitigate longitudinal mode competition, an equivalent π phase shift (EPS) is inserted at 1/3 of the DFB cavity length on one side, and another EPS is placed at 2/3 of the DFB cavity length on the opposite side. Using equivalent chirp methodology, the two peaks of the photon distributions of the two lasing modes are separated, significantly reducing the overlap region and ensuring stable dual-wavelength operation. Moreover, the wavelength separation can be adjusted by changing the chirp rate. Lateral modulation of the grating coefficient κ allows tuning of the dual-wavelength separation by adjusting the DWL cavity length and the κ value. We show that 4PS-SMG exhibits perfect apodization with a cosine profile and two π phase shifts in the cavity, eliminating the need for intentional insertion of two π phase shifts in the DWL cavity to achieve dual-wavelength operation. All the aforementioned DWLs serve as compact pumping sources for generating THz/MMW signals.