Grzegorz Borówka
Grzegorz Borówka has a total of 13 co-authors. Here are the top co-authors by number of shared publications:
Grzegorz Semerjak
Orlen Poludnie SA, Ul Fabryczna 22, PL-32540 Trzebinia, Poland
1 shared publication- Grzegorz Semerjak
ORLEN Południe S.A., Fabryczna 22, 32-540 Trzebinia, Poland
1 shared publication Jan Lubowicz
Paristwowy Inst Badawczy, Inst Nafty & Gazu, Krakow, Poland
1 shared publication- Jan Lubowicz
Oil and Gas Institute—National Research Institute, 25 A Lubicz Str., 31-503 Kraków, Poland
1 shared publication - Marek Lewandowski
Faculty of Energy and Fuels, AGH University of Krakow, 30 Mickiewicza, PL-30059 Kraków, Poland
1 shared publication - Marek Plata
Faculty of Energy and Fuels, AGH University of Krakow, 30-059 Krakow, Poland
1 shared publication
Latest Publications
- Open Access
Purified Glycerine from Biodiesel Production as Biomass or Waste-Based Green Raw Material for the Production of Biochemicals
Glycerine (glycerol) is a polyol consisting of three carbon atoms bonded to hydroxyl groups. It is a by-product of the transesterification of triglycerides, such as animal fats, vegetable oils, or used cooking oils during the biodiesel production process. Crude glycerine is subject to purification processes resulting in distilled glycerine containing at least 99.5% glycerol. Currently, produced high-quality distilled glycerine is used in the food, pharmaceutical, and cosmetic industries. Recently, technologies for converting glycerol to other chemicals through catalytic processes have been intensively developed, e.g., production of bio-based 1,2-propanediol. In the near future, glycerol will certainly become a promising renewable raw material in many modern biorefineries for the synthesis of biofuels, chemicals, and bioenergy production. This paper presents the possibility of using ion exchange resins to remove impurities with trace amounts of sulphur and nitrogen compounds from crude and distilled glycerine, produced during the biodiesel production process from used cooking oils. It was determined that using ion exchange resins at the preliminary purification stage (before distillation) was ineffective. Using cationite resins to purify distilled glycerine produced from waste materials enables the removal of impurities in the form of sulphur and nitrogen compounds.
Open AccessPurified Glycerine from Biodiesel Production as Biomass or Waste-Based Green Raw Material for the Production of Biochemicals
Glycerine (glycerol) is a polyol consisting of three carbon atoms bonded to hydroxyl groups. It is a by-product of the transesterification of triglycerides, such as animal fats, vegetable oils, or used cooking oils during the biodiesel production process. Crude glycerine is subject to purification processes resulting in distilled glycerine containing at least 99.5% glycerol. Currently, produced high-quality distilled glycerine is used in the food, pharmaceutical, and cosmetic industries. Recently, technologies for converting glycerol to other chemicals through catalytic processes have been intensively developed, e.g., production of bio-based 1,2-propanediol. In the near future, glycerol will certainly become a promising renewable raw material in many modern biorefineries for the synthesis of biofuels, chemicals, and bioenergy production. This paper presents the possibility of using ion exchange resins to remove impurities with trace amounts of sulphur and nitrogen compounds from crude and distilled glycerine, produced during the biodiesel production process from used cooking oils. It was determined that using ion exchange resins at the preliminary purification stage (before distillation) was ineffective. Using cationite resins to purify distilled glycerine produced from waste materials enables the removal of impurities in the form of sulphur and nitrogen compounds.
- Open Access
Solvothermal Liquefaction of Blackcurrant Pomace in the Water-Monohydroxy Alcohol Solvent System
Wet organic wastes are especially troublesome in valorization. Therefore, innovative solutions are still in demand to make valorization feasible. In this study, we tested a new transformation route of a blackcurrant pomace as a high-moisture industrial waste through a series of high-temperature and pressure solvothermal liquefaction experiments. The feedstock was directly converted under near-critical conditions of the binary solvent system (water/2-propanol). The goal was to examine the effect of conversion parameters (temperature, biomass-to-solvent ratio) on the change in the yield of resultant bioproducts, as well as the quality thereof. The experiments were conducted in a batch autoclave at a temperature between 250 and 300 °C. The main product of the transformation was liquid biocrude, which was obtained with the highest yield (ca. 52 wt.%) at 275 °C. The quality of biocrude was examined by ATR-FTIR, GC-MS, and elemental analysis. The ultimate biocrude was a viscous heterogeneous mixture containing various groups of components and exhibiting evident energy densification (ca. 145–153%) compared to the value of the feedstock. The proposed processing method is suitable for further development toward efficient valorization technology. More specifically, the co-solvent additive for liquefaction is beneficial not only for the enhancement of the yield of the desired product, i.e., biocrude, but also in terms of technological aspects (reduction of operational pressure and temperature).
Open AccessSolvothermal Liquefaction of Blackcurrant Pomace in the Water-Monohydroxy Alcohol Solvent System
Wet organic wastes are especially troublesome in valorization. Therefore, innovative solutions are still in demand to make valorization feasible. In this study, we tested a new transformation route of a blackcurrant pomace as a high-moisture industrial waste through a series of high-temperature and pressure solvothermal liquefaction experiments. The feedstock was directly converted under near-critical conditions of the binary solvent system (water/2-propanol). The goal was to examine the effect of conversion parameters (temperature, biomass-to-solvent ratio) on the change in the yield of resultant bioproducts, as well as the quality thereof. The experiments were conducted in a batch autoclave at a temperature between 250 and 300 °C. The main product of the transformation was liquid biocrude, which was obtained with the highest yield (ca. 52 wt.%) at 275 °C. The quality of biocrude was examined by ATR-FTIR, GC-MS, and elemental analysis. The ultimate biocrude was a viscous heterogeneous mixture containing various groups of components and exhibiting evident energy densification (ca. 145–153%) compared to the value of the feedstock. The proposed processing method is suitable for further development toward efficient valorization technology. More specifically, the co-solvent additive for liquefaction is beneficial not only for the enhancement of the yield of the desired product, i.e., biocrude, but also in terms of technological aspects (reduction of operational pressure and temperature).
- 11 February 2021
- Published by Wydawnictwo SIGMA-NOT, sp. z.o.o. in PRZEMYSŁ CHEMICZNY
- Vol. 1 (2) , 61-65
Technologie oczyszczania gliceryny technicznej
Wraz z rozwojem biorafinerii oraz coraz większą produkcją biodiesla podaż gliceryny z roku na rok rośnie. Pod nazwą „gliceryna” na rynku dostępne są produkty dwóch jakości, których głównym składnikiem jest glicerol: gliceryna surowa (crude glycerol) oraz gliceryna rafinowana (refined glycerol) zawierająca minimum 99,5% mas. glicerolu. Gliceryna rafinowana jest wykorzystywana w technologii produktów kosmetycznych i farmaceutycznych oraz jako surowiec w wielu procesach katalitycznych. Aby otrzymać glicerynę o wysokim stopniu czystości (EP/USP), stosuje się różne metody jej oczyszczania: neutralizację/zobojętnianie, metody destylacyjne (w tym destylację próżniową), metody sorpcyjne, membranowe i ekstrakcyjne oraz derywatyzację. Stosowane w praktyce procesy oczyszczania gliceryny, często wielostopniowe, wykorzystują te metody do usuwania poszczególnych składników ze strumienia surowej gliceryny.
- 11 February 2021
- Published by Wydawnictwo SIGMA-NOT, sp. z.o.o. in PRZEMYSŁ CHEMICZNY
- Vol. 1 (2) , 61-65
Technologie oczyszczania gliceryny technicznej
Wraz z rozwojem biorafinerii oraz coraz większą produkcją biodiesla podaż gliceryny z roku na rok rośnie. Pod nazwą „gliceryna” na rynku dostępne są produkty dwóch jakości, których głównym składnikiem jest glicerol: gliceryna surowa (crude glycerol) oraz gliceryna rafinowana (refined glycerol) zawierająca minimum 99,5% mas. glicerolu. Gliceryna rafinowana jest wykorzystywana w technologii produktów kosmetycznych i farmaceutycznych oraz jako surowiec w wielu procesach katalitycznych. Aby otrzymać glicerynę o wysokim stopniu czystości (EP/USP), stosuje się różne metody jej oczyszczania: neutralizację/zobojętnianie, metody destylacyjne (w tym destylację próżniową), metody sorpcyjne, membranowe i ekstrakcyjne oraz derywatyzację. Stosowane w praktyce procesy oczyszczania gliceryny, często wielostopniowe, wykorzystują te metody do usuwania poszczególnych składników ze strumienia surowej gliceryny.