Meng Du
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Meng Du has a total of 17 co-authors. Here are the top co-authors by number of shared publications:
- Tiyao Zhou
State Key Laboratory of Enhanced Oil and Gas Recovery, Research Institute of Petroleum Exploration and Development, PetroChina, Beijing 100083, China
3 shared publications - Dongbo He
Research Institute of Petroleum Exploration and Development, PetroChina Company Limited, Beijing 100083, China
2 shared publications - Haibo Li
State Key Laboratory of Enhanced Oil and Gas Recovery, Research Institute of Petroleum Exploration and Development, PetroChina, Beijing 100083, China
2 shared publications - Lanlan Yao
University of Chinese Academy of Sciences, School of Engineering Science, Beijing, 100049, China
2 shared publications - Mingyuan Wang
Research Institute of Petroleum Exploration & Development, China National Petroleum Corporation, Beijing 100083, China
2 shared publications - Weifeng Lv
State Key Laboratory of Enhanced Oil and Gas Recovery (PetroChina Research Institute of Petroleum Exploration & Development), Beijing, China
2 shared publications
Latest Publications
- Open Access
Front Movement and Sweeping Rules of CO2 Flooding under Different Oil Displacement Patterns
CO2 flooding is a pivotal technique for significantly enhancing oil recovery in low-permeability reservoirs. The movement and sweeping rules at the front of CO2 flooding play a critical role in oil recovery; yet, a comprehensive quantitative analysis remains an area in need of refinement. In this study, we developed 1-D and 2-D numerical simulation models to explore the sweeping behavior of miscible, immiscible, and partly miscible CO2 flooding patterns. The front position and movement rules of the three CO2 flooding patterns were determined. A novel approach to the contour area calculation method was introduced to quantitatively characterize the sweep coefficients, and the sweeping rules are discussed regarding the geological parameters, oil viscosity, and injection–production parameters. Furthermore, the Random Forest (RF) algorithm was employed to identify the controlling factor of the sweep coefficient, as determined through the use of out-of-bag (OOB) data permutation analysis. The results showed that the miscible front was located at the point of maximum CO2 content in the oil phase. The immiscible front occurred at the point of maximum interfacial tension near the production well. Remarkably, the immiscible front moved at a faster rate compared with the miscible front. Geological parameters, including porosity, permeability, and reservoir thickness, significantly impacted the gravity segregation effect, thereby influencing the CO2 sweep coefficient. Immiscible flooding exhibited the highest degree of gravity segregation, with a maximum gravity segregation degree (GSD) reaching 78.1. The permeability ratio was a crucial factor, with a lower limit of approximately 5.0 for reservoirs suitable for CO2 flooding. Injection–production parameters also played a pivotal role in terms of the sweep coefficient. Decreased well spacing and increased gas injection rates were found to enhance sweep coefficients by suppressing gravity segregation. Additionally, higher gas injection rates could improve the miscibility degree of partly miscible flooding from 0.69 to 1.0. Oil viscosity proved to be a significant factor influencing the sweep coefficients, with high seepage resistance due to increasing oil viscosity dominating the miscible and partly miscible flooding patterns. Conversely, gravity segregation primarily governed the sweep coefficient in immiscible flooding. In terms of controlling factors, the permeability ratio emerged as a paramount influence, with a factor importance value (FI) reaching 1.04. The findings of this study can help for a better understanding of sweeping rules of CO2 flooding and providing valuable insights for optimizing oil recovery strategies in the field applications of CO2 flooding.
Open AccessFront Movement and Sweeping Rules of CO2 Flooding under Different Oil Displacement Patterns
CO2 flooding is a pivotal technique for significantly enhancing oil recovery in low-permeability reservoirs. The movement and sweeping rules at the front of CO2 flooding play a critical role in oil recovery; yet, a comprehensive quantitative analysis remains an area in need of refinement. In this study, we developed 1-D and 2-D numerical simulation models to explore the sweeping behavior of miscible, immiscible, and partly miscible CO2 flooding patterns. The front position and movement rules of the three CO2 flooding patterns were determined. A novel approach to the contour area calculation method was introduced to quantitatively characterize the sweep coefficients, and the sweeping rules are discussed regarding the geological parameters, oil viscosity, and injection–production parameters. Furthermore, the Random Forest (RF) algorithm was employed to identify the controlling factor of the sweep coefficient, as determined through the use of out-of-bag (OOB) data permutation analysis. The results showed that the miscible front was located at the point of maximum CO2 content in the oil phase. The immiscible front occurred at the point of maximum interfacial tension near the production well. Remarkably, the immiscible front moved at a faster rate compared with the miscible front. Geological parameters, including porosity, permeability, and reservoir thickness, significantly impacted the gravity segregation effect, thereby influencing the CO2 sweep coefficient. Immiscible flooding exhibited the highest degree of gravity segregation, with a maximum gravity segregation degree (GSD) reaching 78.1. The permeability ratio was a crucial factor, with a lower limit of approximately 5.0 for reservoirs suitable for CO2 flooding. Injection–production parameters also played a pivotal role in terms of the sweep coefficient. Decreased well spacing and increased gas injection rates were found to enhance sweep coefficients by suppressing gravity segregation. Additionally, higher gas injection rates could improve the miscibility degree of partly miscible flooding from 0.69 to 1.0. Oil viscosity proved to be a significant factor influencing the sweep coefficients, with high seepage resistance due to increasing oil viscosity dominating the miscible and partly miscible flooding patterns. Conversely, gravity segregation primarily governed the sweep coefficient in immiscible flooding. In terms of controlling factors, the permeability ratio emerged as a paramount influence, with a factor importance value (FI) reaching 1.04. The findings of this study can help for a better understanding of sweeping rules of CO2 flooding and providing valuable insights for optimizing oil recovery strategies in the field applications of CO2 flooding.
- Open Access
- 25 October 2023
- Published by MDPI AG in Preprints.org
Front Movement and Sweeping Rules of CO2 Flooding under Different Oil Displacement Patterns
CO2 flooding stands as a pivotal technique for significantly enhancing oil recovery in low-permeability reservoirs. The movement and sweeping rules at the front of CO2 flooding play a critical role in its oil recovery, yet a comprehensive quantitative analysis remains an area in need of refinement. In this study, we have developed 1D and 2D numerical simulation models to explore the sweeping behavior of miscible, immiscible, and partly-miscible CO2 flooding patterns. The front position and movement rules of the three CO2 flooding patterns are determined. A novel approach of the contour area calculation method is introduced to quantitatively characterize the sweep coefficients, and the sweeping rules are discussed regarding geological parameters, oil viscosity, and injection-production parameters. Furthermore, the Random Forest (RF) algorithm is employed to identify the controlling factor of the sweep coefficient, as determined by out-of-bag (OOB) data displacement analysis. The results show that the miscible front is located at the point of maximum CO2 content in the oil phase. The immiscible front occurs at the point of maximum interfacial tension near the production well. Remarkably, the immiscible front moves at a faster rate compared to the miscible front. Geological parameters, including porosity, permeability, and reservoir thickness, significantly impact the gravity segregation effect, thereby influencing the CO2 sweep coefficient. Immiscible flooding exhibits the highest degree of gravity segregation, with a maximum gravity segregation degree (GSD) reaching 78.1. The permeability ratio is a crucial factor, with a lower limit of approximately 5.0 for reservoirs suitable for CO2 flooding. Injection-production parameters also play a pivotal role in sweep coefficient. Decreased well spacing and increased gas injection rates are found to enhance sweep coefficients by suppressing gravity segregation. Additionally, higher gas injection rates can improve the miscibility degree of partly-miscible flooding from 0.69 to 1.0. Oil viscosity proves to be a significant factor influencing the sweep coefficients, with high seepage resistance due to increasing oil viscosity dominating the miscible and partly-miscible flooding patterns. Conversely, gravity segregation primarily governs the sweep coefficient in immiscible flooding. In terms of controlling factors, the permeability ratio emerges as a paramount influence, with a factor importance value (FI) reaching 1.04. these results provide a theoretical foundation for the application of CO2 flooding, enhancing the understanding of the critical factors governing its success.
- 25 October 2023
- Published by MDPI AG in Preprints.org
Open AccessFront Movement and Sweeping Rules of CO2 Flooding under Different Oil Displacement Patterns
CO2 flooding stands as a pivotal technique for significantly enhancing oil recovery in low-permeability reservoirs. The movement and sweeping rules at the front of CO2 flooding play a critical role in its oil recovery, yet a comprehensive quantitative analysis remains an area in need of refinement. In this study, we have developed 1D and 2D numerical simulation models to explore the sweeping behavior of miscible, immiscible, and partly-miscible CO2 flooding patterns. The front position and movement rules of the three CO2 flooding patterns are determined. A novel approach of the contour area calculation method is introduced to quantitatively characterize the sweep coefficients, and the sweeping rules are discussed regarding geological parameters, oil viscosity, and injection-production parameters. Furthermore, the Random Forest (RF) algorithm is employed to identify the controlling factor of the sweep coefficient, as determined by out-of-bag (OOB) data displacement analysis. The results show that the miscible front is located at the point of maximum CO2 content in the oil phase. The immiscible front occurs at the point of maximum interfacial tension near the production well. Remarkably, the immiscible front moves at a faster rate compared to the miscible front. Geological parameters, including porosity, permeability, and reservoir thickness, significantly impact the gravity segregation effect, thereby influencing the CO2 sweep coefficient. Immiscible flooding exhibits the highest degree of gravity segregation, with a maximum gravity segregation degree (GSD) reaching 78.1. The permeability ratio is a crucial factor, with a lower limit of approximately 5.0 for reservoirs suitable for CO2 flooding. Injection-production parameters also play a pivotal role in sweep coefficient. Decreased well spacing and increased gas injection rates are found to enhance sweep coefficients by suppressing gravity segregation. Additionally, higher gas injection rates can improve the miscibility degree of partly-miscible flooding from 0.69 to 1.0. Oil viscosity proves to be a significant factor influencing the sweep coefficients, with high seepage resistance due to increasing oil viscosity dominating the miscible and partly-miscible flooding patterns. Conversely, gravity segregation primarily governs the sweep coefficient in immiscible flooding. In terms of controlling factors, the permeability ratio emerges as a paramount influence, with a factor importance value (FI) reaching 1.04. these results provide a theoretical foundation for the application of CO2 flooding, enhancing the understanding of the critical factors governing its success.
- Open Access
Research on Mathematical Model of Shale Oil Reservoir Flow
There are complex pore structures in shale reservoirs, and the nonlinear flow characteristics of shale reservoirs are complicated by stress sensitivity and boundary layer effects. In this research, a new flow mathematical model was established based on capillary model, stress sensitivity and boundary layer effect. The model was verified by the experimental results of Jilin shale oil reservoir, and the influencing factors of flow characteristics were analyzed. The results show that the new shale oil flow model has good fitting and high reliability with the experimental results. The boundary layer effect and stress sensitivity are the main factors affecting the seepage characteristics. With the increase in the pressure gradient, the influence of the boundary layer effect on the flow is gradually enhanced, and the influence of the stress sensitivity on the flow is gradually weakened. At the same time, this study developed a method for the evaluation of effective displacement distance of shale oil reservoir with CO2 injection through the limited injection-production well spacing method, and obtained the nonlinear flow curve of displacement distance with reservoir permeability under different injection and production pressure difference. This research deeply studies the flow characteristics of shale oil reservoir and provides a theoretical basis for the enhanced oil recovery of shale oil with CO2 injection.
Open AccessResearch on Mathematical Model of Shale Oil Reservoir Flow
There are complex pore structures in shale reservoirs, and the nonlinear flow characteristics of shale reservoirs are complicated by stress sensitivity and boundary layer effects. In this research, a new flow mathematical model was established based on capillary model, stress sensitivity and boundary layer effect. The model was verified by the experimental results of Jilin shale oil reservoir, and the influencing factors of flow characteristics were analyzed. The results show that the new shale oil flow model has good fitting and high reliability with the experimental results. The boundary layer effect and stress sensitivity are the main factors affecting the seepage characteristics. With the increase in the pressure gradient, the influence of the boundary layer effect on the flow is gradually enhanced, and the influence of the stress sensitivity on the flow is gradually weakened. At the same time, this study developed a method for the evaluation of effective displacement distance of shale oil reservoir with CO2 injection through the limited injection-production well spacing method, and obtained the nonlinear flow curve of displacement distance with reservoir permeability under different injection and production pressure difference. This research deeply studies the flow characteristics of shale oil reservoir and provides a theoretical basis for the enhanced oil recovery of shale oil with CO2 injection.
- Open Access
Online Nuclear Magnetic Resonance Analysis of the Effect of Stress Changes on the Porosity and Permeability of Shale Oil Reservoirs
In the process of volumetric fracturing of shale oil, physical property changes caused by stress changes will affect the recovery, so it is urgent to conduct an analysis and evaluation of physical property changes caused by stress changes. In this research, a physical simulation experiment with constant confining pressure and variable pore pressure combined with an online nuclear magnetic resonance (NMR) technique was constructed. The results show that the increased range of the macropore (IRM) and the total pore (IRT) of matrix samples is 11.70~13.24% and 10.54~14.27% with the increase of pore pressure, respectively. That of fractured samples are 7.94~8.48% and 9.21~10.51%. It indicates that increasing pore pressure is more effective for matrix reservoirs. The decreased range of the macropore (DRM) and the total pore (DRT) of matrix samples is 10.29~13.89% and 10.38~21.24% with the unloading of pore pressure, respectively. That of fractured samples are 8.49~9.66% and 10.91~11.10%. It indicates that unloading pressure has less influence on fractured reservoirs. The increased range of permeability of matrix rock samples is 99~120% with the increase of pore pressure. Greatly supplementing formation energy is an effective means to improve the permeability of matrix reservoirs. Compared with matrix reservoirs, unloading pore pressure is more damaging to fractured reservoirs.
Open AccessOnline Nuclear Magnetic Resonance Analysis of the Effect of Stress Changes on the Porosity and Permeability of Shale Oil Reservoirs
In the process of volumetric fracturing of shale oil, physical property changes caused by stress changes will affect the recovery, so it is urgent to conduct an analysis and evaluation of physical property changes caused by stress changes. In this research, a physical simulation experiment with constant confining pressure and variable pore pressure combined with an online nuclear magnetic resonance (NMR) technique was constructed. The results show that the increased range of the macropore (IRM) and the total pore (IRT) of matrix samples is 11.70~13.24% and 10.54~14.27% with the increase of pore pressure, respectively. That of fractured samples are 7.94~8.48% and 9.21~10.51%. It indicates that increasing pore pressure is more effective for matrix reservoirs. The decreased range of the macropore (DRM) and the total pore (DRT) of matrix samples is 10.29~13.89% and 10.38~21.24% with the unloading of pore pressure, respectively. That of fractured samples are 8.49~9.66% and 10.91~11.10%. It indicates that unloading pressure has less influence on fractured reservoirs. The increased range of permeability of matrix rock samples is 99~120% with the increase of pore pressure. Greatly supplementing formation energy is an effective means to improve the permeability of matrix reservoirs. Compared with matrix reservoirs, unloading pore pressure is more damaging to fractured reservoirs.