Chen Liu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Chen Liu has a total of 24 co-authors. Here are the top co-authors by number of shared publications:
- Wenchao Liu
State Key Laboratory of Offshore Oil and Gas Exploitation, Beijing 100028, China
6 shared publications - Chengcheng Qiao
School of Civil and Resource Engineering, University of Science and Technology Beijing, Beijing 100083, China
3 shared publications - Mingkai Sun
School of Resources and Safety Engineering, University of Science and Technology Beijing, Beijing 100083, China
2 shared publications - Boyu Lian
School of Civil and Resource Engineering, University of Science and Technology Beijing, Beijing 100083, China
1 shared publication Hedong Sun
Research Institute of Petroleum Exploration and Development, China
1 shared publication- Hedong Sun
PetroChina Research Institute of Petroleum Exploration and Development
1 shared publication
Latest Publications
- Open Access
Nonlinear Flow Model for Calculating Maximum Fracture Spacing in Horizontal Wells Considering Gaussian Distribution of Reservoir Heterogeneity
In order to improve production rate, multi-stage fractured horizontal wells are often used to develop tight reservoirs. The fracture spacing has an impact on production. How to determine the optimal fracture spacing (shot spacing) is very important. Firstly, a nonlinear one-dimensional steady non-Darcy flow model in a stimulated reservoir volume (SRV) area around the main fracture in a tight reservoir is established by introducing the moving boundary theory of low-velocity non-Darcy flow. The model comprehensively considers the heterogeneity of reservoir permeability and porosity, the stress sensitivity of permeability and the low-velocity non-Darcy flow with threshold pressure gradient. In particular, Gaussian distribution function is used to accurately characterize the reservoir heterogeneity. An analytical solution without considering the stress sensitivity is also derived by using L’Hospital’s rule. Secondly, the limit utilization boundary is determined, and then a novel method for calculating the maximum fracture spacing is proposed. The method is effectively applied to an actual well, and the necessity of considering permeability stress sensitivity is verified. Finally, the effects of different fracturing modes (slow descent type, transitional type and rapid descent type) and some characteristic parameters of the Gaussian distribution function on permeability and pressure distribution are analyzed. This presented work provides some theoretical basis and technical guidance for optimizing the fracture spacing of multi-stage fractured horizontal wells in tight reservoirs. In addition, the optimization of fracture spacing needs to consider both the impact on production capacity and the impact of fracturing costs on profits. The optimization of fracture spacing considering economic profits is the direction of future research.
Open AccessNonlinear Flow Model for Calculating Maximum Fracture Spacing in Horizontal Wells Considering Gaussian Distribution of Reservoir Heterogeneity
In order to improve production rate, multi-stage fractured horizontal wells are often used to develop tight reservoirs. The fracture spacing has an impact on production. How to determine the optimal fracture spacing (shot spacing) is very important. Firstly, a nonlinear one-dimensional steady non-Darcy flow model in a stimulated reservoir volume (SRV) area around the main fracture in a tight reservoir is established by introducing the moving boundary theory of low-velocity non-Darcy flow. The model comprehensively considers the heterogeneity of reservoir permeability and porosity, the stress sensitivity of permeability and the low-velocity non-Darcy flow with threshold pressure gradient. In particular, Gaussian distribution function is used to accurately characterize the reservoir heterogeneity. An analytical solution without considering the stress sensitivity is also derived by using L’Hospital’s rule. Secondly, the limit utilization boundary is determined, and then a novel method for calculating the maximum fracture spacing is proposed. The method is effectively applied to an actual well, and the necessity of considering permeability stress sensitivity is verified. Finally, the effects of different fracturing modes (slow descent type, transitional type and rapid descent type) and some characteristic parameters of the Gaussian distribution function on permeability and pressure distribution are analyzed. This presented work provides some theoretical basis and technical guidance for optimizing the fracture spacing of multi-stage fractured horizontal wells in tight reservoirs. In addition, the optimization of fracture spacing needs to consider both the impact on production capacity and the impact of fracturing costs on profits. The optimization of fracture spacing considering economic profits is the direction of future research.
- Open Access
Technology Progress in High-Frequency Electromagnetic In Situ Thermal Recovery of Heavy Oil and Its Prospects in Low-Carbon Situations
Heavy oil resources are abundant globally, holding immense development potential. However, conventional thermal recovery methods such as steam injection are plagued by high heat loss, substantial carbon emissions, and significant water consumption, making them incompatible with carbon reduction goals and the sustainable socioeconomic development demands. A new method of high-frequency electromagnetic in situ heating, which targets polar molecules, can convert electromagnetic energy into heat so as to achieve rapid volumetric heating of the reservoir. This method has the potential to overcome the drawbacks of traditional techniques. Nevertheless, it faces significant drawbacks such as limited heating range and inadequate energy supply during later production stages, which necessitates auxiliary enhancement measures. Various enhancement measures have been reported, including nitrogen injection, hydrocarbon solvent injection, or the use of nano-metal oxide injections. These methods are hindered by issues such as pure nitrogen being easy to breakthrough, high costs, and metal pollution. Through extensive literature review, this article charts the evolution of high-frequency electromagnetic in situ heating technology for heavy oil and the current understanding of the coupled heat and mass transfer mechanisms underlying this technology. Moreover, based on a profound analysis of the technology’s progression trends, this work introduces a new direction: CO2-N2 co-injection as an enhancement strategy for high-frequency electromagnetic in situ heavy oil recovery. There is promising potential for the development of new technologies in the future that combine high efficiency, low carbon emissions, environmental friendliness, economic viability, and energy conservation. Furthermore, some research prospects in low-carbon situations and challenges for the new technology in future are presented in detail. All in all, the contribution of the paper lies in the summarizing of some main drawbacks of current enhanced electromagnetic in situ thermal recovery methods, and presents a novel research direction of using CO2-N2 co-injection as an enhancement strategy based on its current research status in low-carbon situations.
Open AccessTechnology Progress in High-Frequency Electromagnetic In Situ Thermal Recovery of Heavy Oil and Its Prospects in Low-Carbon Situations
Heavy oil resources are abundant globally, holding immense development potential. However, conventional thermal recovery methods such as steam injection are plagued by high heat loss, substantial carbon emissions, and significant water consumption, making them incompatible with carbon reduction goals and the sustainable socioeconomic development demands. A new method of high-frequency electromagnetic in situ heating, which targets polar molecules, can convert electromagnetic energy into heat so as to achieve rapid volumetric heating of the reservoir. This method has the potential to overcome the drawbacks of traditional techniques. Nevertheless, it faces significant drawbacks such as limited heating range and inadequate energy supply during later production stages, which necessitates auxiliary enhancement measures. Various enhancement measures have been reported, including nitrogen injection, hydrocarbon solvent injection, or the use of nano-metal oxide injections. These methods are hindered by issues such as pure nitrogen being easy to breakthrough, high costs, and metal pollution. Through extensive literature review, this article charts the evolution of high-frequency electromagnetic in situ heating technology for heavy oil and the current understanding of the coupled heat and mass transfer mechanisms underlying this technology. Moreover, based on a profound analysis of the technology’s progression trends, this work introduces a new direction: CO2-N2 co-injection as an enhancement strategy for high-frequency electromagnetic in situ heavy oil recovery. There is promising potential for the development of new technologies in the future that combine high efficiency, low carbon emissions, environmental friendliness, economic viability, and energy conservation. Furthermore, some research prospects in low-carbon situations and challenges for the new technology in future are presented in detail. All in all, the contribution of the paper lies in the summarizing of some main drawbacks of current enhanced electromagnetic in situ thermal recovery methods, and presents a novel research direction of using CO2-N2 co-injection as an enhancement strategy based on its current research status in low-carbon situations.
- Open Access
Fracture Spacing Optimization Method for Multi-Stage Fractured Horizontal Wells in Shale Oil Reservoir Based on Dynamic Production Data Analysis
In order to improve the shale oil production rate and save fracturing costs, based on dynamic production data, a production-oriented optimization method for fracture spacing of multi-stage fractured horizontal wells is proposed in this study. First, M. Brown et al.’s trilinear seepage flow models and their pressure and flow rate solutions are applied. Second, deconvolution theory is introduced to normalize the production data. The data of variable pressure and variable flow rate are, respectively, transformed into the pressure data under unit flow rate and the flow rate data under unit production pressure drop; and the influence of data error is eliminated. Two kinds of typical curve of the normalized data are analyzed using the pressure and flow rate solutions of M. Brown et al.’s models. The two fitting methods constrain each other. Thus, reservoir and fracture parameters are interpretated. A practical model has been established to more accurately describe the seepage flow behavior in shale oil reservoirs. Third, using Duhamel’s principle and the rate solution, the daily and cumulative production rate under any variable production pressure can be obtained. The productivity can be more accurately predicted. Finally, the analysis method is applied to analyze the actual dynamic production data. The fracture spacing of a shale oil producing well in an actual block is optimized from the aspects of production life, cumulative production, economic benefits and other influencing factors, and some significant conclusions are obtained. The research results show that with the goal of maximum cumulative production, the optimal fracture spacing is 5.5 m for 5 years and 11.4 m for 10 years. All in all, the fracture spacing optimization and design theory of multi-stage fractured horizontal wells is enriched.
Open AccessFracture Spacing Optimization Method for Multi-Stage Fractured Horizontal Wells in Shale Oil Reservoir Based on Dynamic Production Data Analysis
In order to improve the shale oil production rate and save fracturing costs, based on dynamic production data, a production-oriented optimization method for fracture spacing of multi-stage fractured horizontal wells is proposed in this study. First, M. Brown et al.’s trilinear seepage flow models and their pressure and flow rate solutions are applied. Second, deconvolution theory is introduced to normalize the production data. The data of variable pressure and variable flow rate are, respectively, transformed into the pressure data under unit flow rate and the flow rate data under unit production pressure drop; and the influence of data error is eliminated. Two kinds of typical curve of the normalized data are analyzed using the pressure and flow rate solutions of M. Brown et al.’s models. The two fitting methods constrain each other. Thus, reservoir and fracture parameters are interpretated. A practical model has been established to more accurately describe the seepage flow behavior in shale oil reservoirs. Third, using Duhamel’s principle and the rate solution, the daily and cumulative production rate under any variable production pressure can be obtained. The productivity can be more accurately predicted. Finally, the analysis method is applied to analyze the actual dynamic production data. The fracture spacing of a shale oil producing well in an actual block is optimized from the aspects of production life, cumulative production, economic benefits and other influencing factors, and some significant conclusions are obtained. The research results show that with the goal of maximum cumulative production, the optimal fracture spacing is 5.5 m for 5 years and 11.4 m for 10 years. All in all, the fracture spacing optimization and design theory of multi-stage fractured horizontal wells is enriched.
- Open Access
Progress of Seepage Law and Development Technologies for Shale Condensate Gas Reservoirs
With the continuous development of conventional oil and gas resources, the strategic transformation of energy structure is imminent. Shale condensate gas reservoir has high development value because of its abundant reserves. However, due to the multi-scale flow of shale gas, adsorption and desorption, the strong stress sensitivity of matrix and fractures, the abnormal condensation phase transition mechanism, high-speed non-Darcy seepage in artificial fractures, and heterogeneity of reservoir and multiphase flows, the multi-scale nonlinear seepage mechanisms are extremely complicated in shale condensate gas reservoirs. A certain theoretical basis for the engineering development can be provided by mastering the percolation law of shale condensate gas reservoirs, such as improvement of productivity prediction and recovery efficiency. The productivity evaluation method of shale condensate gas wells based on empirical method is simple in calculation but poor in reliability. The characteristic curve analysis method has strong reliability but a great dependence on the selection of the seepage model. The artificial intelligence method can deal with complex data and has a high prediction accuracy. Establishing an efficient shale condensate gas reservoir development simulation technology and accurately predicting the production performance of production wells will help to rationally formulate a stable and high-yield mining scheme, so as to obtain better economic benefits.
Open AccessProgress of Seepage Law and Development Technologies for Shale Condensate Gas Reservoirs
With the continuous development of conventional oil and gas resources, the strategic transformation of energy structure is imminent. Shale condensate gas reservoir has high development value because of its abundant reserves. However, due to the multi-scale flow of shale gas, adsorption and desorption, the strong stress sensitivity of matrix and fractures, the abnormal condensation phase transition mechanism, high-speed non-Darcy seepage in artificial fractures, and heterogeneity of reservoir and multiphase flows, the multi-scale nonlinear seepage mechanisms are extremely complicated in shale condensate gas reservoirs. A certain theoretical basis for the engineering development can be provided by mastering the percolation law of shale condensate gas reservoirs, such as improvement of productivity prediction and recovery efficiency. The productivity evaluation method of shale condensate gas wells based on empirical method is simple in calculation but poor in reliability. The characteristic curve analysis method has strong reliability but a great dependence on the selection of the seepage model. The artificial intelligence method can deal with complex data and has a high prediction accuracy. Establishing an efficient shale condensate gas reservoir development simulation technology and accurately predicting the production performance of production wells will help to rationally formulate a stable and high-yield mining scheme, so as to obtain better economic benefits.
- Open Access
Dynamic Productivity Prediction Method of Shale Condensate Gas Reservoir Based on Convolution Equation
The dynamic productivity prediction of shale condensate gas reservoirs is of great significance to the optimization of stimulation measures. Therefore, in this study, a dynamic productivity prediction method for shale condensate gas reservoirs based on a convolution equation is proposed. The method has been used to predict the dynamic production of 10 multi-stage fractured horizontal wells in the Duvernay shale condensate gas reservoir. The results show that flow-rate deconvolution algorithms can greatly improve the fitting effect of the Blasingame production decline curve when applied to the analysis of unstable production of shale gas condensate reservoirs. Compared with the production decline analysis method in commercial software HIS Harmony RTA, the productivity prediction method based on a convolution equation of shale condensate gas reservoirs has better fitting affect and higher accuracy of recoverable reserves prediction. Compared with the actual production, the error of production predicted by the convolution equation is generally within 10%. This means it is a fast and accurate method. This study enriches the productivity prediction methods of shale condensate gas reservoirs and has important practical significance for the productivity prediction and stimulation optimization of shale condensate gas reservoirs.
Open AccessDynamic Productivity Prediction Method of Shale Condensate Gas Reservoir Based on Convolution Equation
The dynamic productivity prediction of shale condensate gas reservoirs is of great significance to the optimization of stimulation measures. Therefore, in this study, a dynamic productivity prediction method for shale condensate gas reservoirs based on a convolution equation is proposed. The method has been used to predict the dynamic production of 10 multi-stage fractured horizontal wells in the Duvernay shale condensate gas reservoir. The results show that flow-rate deconvolution algorithms can greatly improve the fitting effect of the Blasingame production decline curve when applied to the analysis of unstable production of shale gas condensate reservoirs. Compared with the production decline analysis method in commercial software HIS Harmony RTA, the productivity prediction method based on a convolution equation of shale condensate gas reservoirs has better fitting affect and higher accuracy of recoverable reserves prediction. Compared with the actual production, the error of production predicted by the convolution equation is generally within 10%. This means it is a fast and accurate method. This study enriches the productivity prediction methods of shale condensate gas reservoirs and has important practical significance for the productivity prediction and stimulation optimization of shale condensate gas reservoirs.
- 1 February 2023
- Published by AIP Publishing in Physics of Fluids
- Vol. 35 (2)
Integrated flow model for evaluating maximum fracture spacing in horizontal wells
Multi-stage fractured horizontal wells are extensively used in unconventional reservoir; hence, optimizing the spacing between these hydraulic fractures is essential. Fracture spacing is an important factor that influences the production efficiency and costs. In this study, maximum fracture spacing in low-permeability liquid reservoirs is studied by building an integrated flow model incorporating key petrophysical characteristics. First, a kinematic equation for non-Darcy seepage flow is constructed using the fractal theory to consider the non-homogeneous characteristics of the stimulated rock volume area (StRV) and its stress sensitivity. Then, the kinematic equation is used to build an integrated mathematical model of one-dimensional steady-state flow within the StRV to analytically determine the pressure distribution in StRV. The resultant pressure distribution is utilized to propose an optimal value for the maximum fracture spacing. Finally, the effects of fractal index, initial matrix permeability, depletion, and stress sensitivity coefficient on the limit disturbed distance and pressure distribution are studied. This study not only enriches the fundamental theory of nonlinear seepage flow mechanics but also provides some technical guidance for choosing appropriate fracture spacing in horizontal wells.
- 1 February 2023
- Published by AIP Publishing in Physics of Fluids
- Vol. 35 (2)
Integrated flow model for evaluating maximum fracture spacing in horizontal wells
Multi-stage fractured horizontal wells are extensively used in unconventional reservoir; hence, optimizing the spacing between these hydraulic fractures is essential. Fracture spacing is an important factor that influences the production efficiency and costs. In this study, maximum fracture spacing in low-permeability liquid reservoirs is studied by building an integrated flow model incorporating key petrophysical characteristics. First, a kinematic equation for non-Darcy seepage flow is constructed using the fractal theory to consider the non-homogeneous characteristics of the stimulated rock volume area (StRV) and its stress sensitivity. Then, the kinematic equation is used to build an integrated mathematical model of one-dimensional steady-state flow within the StRV to analytically determine the pressure distribution in StRV. The resultant pressure distribution is utilized to propose an optimal value for the maximum fracture spacing. Finally, the effects of fractal index, initial matrix permeability, depletion, and stress sensitivity coefficient on the limit disturbed distance and pressure distribution are studied. This study not only enriches the fundamental theory of nonlinear seepage flow mechanics but also provides some technical guidance for choosing appropriate fracture spacing in horizontal wells.