Mariia Protsak
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Mariia Protsak has a total of 82 co-authors. Here are the top co-authors by number of shared publications:
- Daniil Nikitin
Charles University
10 shared publications - Kateryna Biliak
Faculty of Mathematics and Physics Department of Macromolecular Physics Charles University V Holešovičkách 2 Prague 18000 Czech Republic
9 shared publications - Andrei Choukourov
Charles University V Holešovičkách 2
8 shared publications - Marco Tosca
ELI Beamlines Facility, The Extreme Light Infrastructure ERIC 2 , 252 41 Dolní Břežany
6 shared publications - Jan Hanuš
Charles University
5 shared publications - Miroslav Cieslar
Charles University
5 shared publications
Latest Publications
- Open Access
- 17 November 2026
- Published by IOP Publishing in Journal of Physics D: Applied Physics
- Vol. 59 (46) , 465301
Magnetically active nickel nanofluids with electrophoretic response and NiO-limited electrical transport
Nickel nanofluids provide a promising platform for field-reconfigurable nanoscale systems by combining magnetic functionality with colloidal processability. In this work, Ni nanofluids comprising Ni nanoparticles (NPs) with mean sizes of 10, 30, and 50 nm dispersed in polyethylene glycol (PEG) were synthesized using gas-phase aggregation. The influence of NP size and oxidation on NP field-driven assembly and electrical transport in the nanofluids was systematically investigated. Magnetic characterization revealed a clear size dependence of the nanofluid response, with the saturation magnetization increasing with NP size and approaching the bulk Ni value for the larger NPs. Oxidation of Ni NPs after exposure to ambient conditions was confirmed by x-ray photoelectron spectroscopy and transmission electron microscopy (TEM), including liquid-state TEM. For the smaller NPs, the formation of an antiferromagnetic NiO shell produced exchange-bias behavior, consistent with interfacial coupling between the ferromagnetic Ni core and the antiferromagnetic oxide shell. The dispersed Ni NPs were exposed to external electric and magnetic fields. The NPs moved toward the positively biased electrode and accumulated in the interelectrode gap, forming long-range, pathway-like assemblies similar to those previously reported in Ag-based nanofluids. However, these assemblies did not result in dominant NP-mediated electrical conduction. Impedance spectroscopy indicated that electrical transport in the Ni nanofluids was dominated by conduction through the PEG matrix, because surface oxidation suppressed charge transfer between the Ni NPs. In addition, NP chains were formed solely under a magnetic field generated by an array of permanent magnets. The direction of the resulting NP chains could be controlled by changing the magnetic-field orientation. Thus, Ni nanofluids combine electrophoretic responsiveness with magnetically driven assembly, while surface oxidation limits NP-mediated electrical conduction.
- 17 November 2026
- Published by IOP Publishing in Journal of Physics D: Applied Physics
- Vol. 59 (46) , 465301
Open AccessMagnetically active nickel nanofluids with electrophoretic response and NiO-limited electrical transport
Nickel nanofluids provide a promising platform for field-reconfigurable nanoscale systems by combining magnetic functionality with colloidal processability. In this work, Ni nanofluids comprising Ni nanoparticles (NPs) with mean sizes of 10, 30, and 50 nm dispersed in polyethylene glycol (PEG) were synthesized using gas-phase aggregation. The influence of NP size and oxidation on NP field-driven assembly and electrical transport in the nanofluids was systematically investigated. Magnetic characterization revealed a clear size dependence of the nanofluid response, with the saturation magnetization increasing with NP size and approaching the bulk Ni value for the larger NPs. Oxidation of Ni NPs after exposure to ambient conditions was confirmed by x-ray photoelectron spectroscopy and transmission electron microscopy (TEM), including liquid-state TEM. For the smaller NPs, the formation of an antiferromagnetic NiO shell produced exchange-bias behavior, consistent with interfacial coupling between the ferromagnetic Ni core and the antiferromagnetic oxide shell. The dispersed Ni NPs were exposed to external electric and magnetic fields. The NPs moved toward the positively biased electrode and accumulated in the interelectrode gap, forming long-range, pathway-like assemblies similar to those previously reported in Ag-based nanofluids. However, these assemblies did not result in dominant NP-mediated electrical conduction. Impedance spectroscopy indicated that electrical transport in the Ni nanofluids was dominated by conduction through the PEG matrix, because surface oxidation suppressed charge transfer between the Ni NPs. In addition, NP chains were formed solely under a magnetic field generated by an array of permanent magnets. The direction of the resulting NP chains could be controlled by changing the magnetic-field orientation. Thus, Ni nanofluids combine electrophoretic responsiveness with magnetically driven assembly, while surface oxidation limits NP-mediated electrical conduction.
- Open Access
- 16 June 2026
- Published by American Chemical Society (ACS) in ACS Polymers Au
- Vol. 6 (5) , 1315-1328
Monomer Structure and Discharge Power Influence the Multiscale Architecture of Plasma-Polymerized Hydrocarbon Nanoparticles
Plasma polymer nanoparticles (pp-NPs) have emerged as linker-free nanocarriers for bioactive cargo and as nanofuels for laser-driven nuclear fusion, yet the structural factors governing their functionality remain poorly understood. Here, pp-NPs were synthesized via plasma polymerization of hexane, cyclohexane, and benzene to determine how monomer structure and specific energy input control radical concentration, hydrogen content, and hierarchical topology. Electron spin resonance and variable-energy positron annihilation lifetime spectroscopy establish that unquenched radical concentrations (1014–1016 spins mg–1) and free-volume size (0.5–0.6 nm) increase from aliphatic to aromatic monomers, whereas free-volume concentration decreases inversely. These trends arise from biradical formation in benzene plasma, steric constraints of aromatic rings, and denser packing caused by reduced hydrogen content, as confirmed by elastic recoil detection analysis. Higher discharge power unexpectedly reduces cross-link density in pp-NPs; statistical network reconstruction reveals that unsaturated carbon bonds reduce the concentration of elastically active network chains more strongly than dehydrogenation increases it. Atomic force microscopy demonstrates that aliphatic monomers yield smoother overall NP surfaces but with a more locally roughened profile (roughness exponent α = 0.68), whereas pp-benzene NPs exhibit higher global roughness yet smoother local morphology (α = 0.75). Upon deposition, pp-NPs assemble into porous coatings with interparticle voids tunable via NP size (65–560 nm). Together, these findings elucidate how plasma chemistry governs the hierarchical architecture of pp-NPs from subnanometer free volumes to nanoscale surface morphology and mesoscopic interparticle voids, establishing design principles for tailoring radical concentration, hydrogen content, and multiscale porosity for advanced applications.
- 16 June 2026
- Published by American Chemical Society (ACS) in ACS Polymers Au
- Vol. 6 (5) , 1315-1328
Open AccessMonomer Structure and Discharge Power Influence the Multiscale Architecture of Plasma-Polymerized Hydrocarbon Nanoparticles
Plasma polymer nanoparticles (pp-NPs) have emerged as linker-free nanocarriers for bioactive cargo and as nanofuels for laser-driven nuclear fusion, yet the structural factors governing their functionality remain poorly understood. Here, pp-NPs were synthesized via plasma polymerization of hexane, cyclohexane, and benzene to determine how monomer structure and specific energy input control radical concentration, hydrogen content, and hierarchical topology. Electron spin resonance and variable-energy positron annihilation lifetime spectroscopy establish that unquenched radical concentrations (1014–1016 spins mg–1) and free-volume size (0.5–0.6 nm) increase from aliphatic to aromatic monomers, whereas free-volume concentration decreases inversely. These trends arise from biradical formation in benzene plasma, steric constraints of aromatic rings, and denser packing caused by reduced hydrogen content, as confirmed by elastic recoil detection analysis. Higher discharge power unexpectedly reduces cross-link density in pp-NPs; statistical network reconstruction reveals that unsaturated carbon bonds reduce the concentration of elastically active network chains more strongly than dehydrogenation increases it. Atomic force microscopy demonstrates that aliphatic monomers yield smoother overall NP surfaces but with a more locally roughened profile (roughness exponent α = 0.68), whereas pp-benzene NPs exhibit higher global roughness yet smoother local morphology (α = 0.75). Upon deposition, pp-NPs assemble into porous coatings with interparticle voids tunable via NP size (65–560 nm). Together, these findings elucidate how plasma chemistry governs the hierarchical architecture of pp-NPs from subnanometer free volumes to nanoscale surface morphology and mesoscopic interparticle voids, establishing design principles for tailoring radical concentration, hydrogen content, and multiscale porosity for advanced applications.
- Open Access
- 21 May 2026
- Published by Elsevier in Colloids and Surfaces A: Physicochemical and Engineering Aspects
- Vol. 747
Role of temperature and environmental conditions in resistive switching in silver/poly(ethylene glycol) nanofluids
- 21 May 2026
- Published by Elsevier in Colloids and Surfaces A: Physicochemical and Engineering Aspects
- Vol. 747
Open AccessRole of temperature and environmental conditions in resistive switching in silver/poly(ethylene glycol) nanofluids
- Open Access
- 26 June 2025
- Published by Wiley in Advanced Science
- Vol. 12 (35) , e05103
Unveiling the Fundamental Principles of Reconfigurable Resistance States in Silver/Poly(Ethylene Glycol) Nanofluids
Developing novel memristive systems aims to implement key principles of biological neuron assemblies – plasticity, adaptivity, and self‐organization – into artificial devices for parallel, energy‐efficient computing. Solid‐state memristive devices, such as crossbar arrays and percolated nanoparticle (NP) networks, already demonstrate these properties. However, closer similarity to neural networks is expected from liquid‐state systems, including polymer melts, which remain largely unexplored. Here, the resistive switching in silver/poly(ethylene glycol) (Ag/PEG) nanofluids, prepared by depositing gas‐aggregated Ag NPs into PEGs of varying molecular mass, is investigated. These systems form long‐range conductive NP bridges with reconfigurable resistance states in response to an electric field. The zeta‐potential of Ag NPs and molecular mobility of PEG determine the prevalence of low resistance (ohmic) state, high resistance states (poor conductance) or intermediate transition states governed by space‐charge‐limited conduction or electron tunneling. The occurrence of these states is given by the interparticle gaps, which are determined by the conformation of PEG molecules adsorbed on the NPs. It is presented, for the first time, an equivalent circuit model for the Ag/PEG system. These findings pave the way to adopt polymer melts as matrices for neuromorphic engineering and bio‐inspired electronics.
- 26 June 2025
- Published by Wiley in Advanced Science
- Vol. 12 (35) , e05103
Open AccessUnveiling the Fundamental Principles of Reconfigurable Resistance States in Silver/Poly(Ethylene Glycol) Nanofluids
Developing novel memristive systems aims to implement key principles of biological neuron assemblies – plasticity, adaptivity, and self‐organization – into artificial devices for parallel, energy‐efficient computing. Solid‐state memristive devices, such as crossbar arrays and percolated nanoparticle (NP) networks, already demonstrate these properties. However, closer similarity to neural networks is expected from liquid‐state systems, including polymer melts, which remain largely unexplored. Here, the resistive switching in silver/poly(ethylene glycol) (Ag/PEG) nanofluids, prepared by depositing gas‐aggregated Ag NPs into PEGs of varying molecular mass, is investigated. These systems form long‐range conductive NP bridges with reconfigurable resistance states in response to an electric field. The zeta‐potential of Ag NPs and molecular mobility of PEG determine the prevalence of low resistance (ohmic) state, high resistance states (poor conductance) or intermediate transition states governed by space‐charge‐limited conduction or electron tunneling. The occurrence of these states is given by the interparticle gaps, which are determined by the conformation of PEG molecules adsorbed on the NPs. It is presented, for the first time, an equivalent circuit model for the Ag/PEG system. These findings pave the way to adopt polymer melts as matrices for neuromorphic engineering and bio‐inspired electronics.
- 14 May 2025
- Published by Taylor & Francis in Molecular Crystals and Liquid Crystals
- Vol. 769 (7-8) , 801-810
Surface morphology and dispersion properties of ZnGa 2 O 4 :Cr and ZnGa 2 O 4 :Mn thin films
- 14 May 2025
- Published by Taylor & Francis in Molecular Crystals and Liquid Crystals
- Vol. 769 (7-8) , 801-810
Surface morphology and dispersion properties of ZnGa 2 O 4 :Cr and ZnGa 2 O 4 :Mn thin films
- Open Access
- 3 February 2025
- Published by American Chemical Society (ACS) in ACS Applied Nano Materials
- Vol. 8 (6) , 3092-3103
Gas-Aggregated Core–Shell ZrN@SiN Nanoparticles with Enhanced Thermal Stability for Plasmonic Applications at High Temperatures
- 3 February 2025
- Published by American Chemical Society (ACS) in ACS Applied Nano Materials
- Vol. 8 (6) , 3092-3103
Open AccessGas-Aggregated Core–Shell ZrN@SiN Nanoparticles with Enhanced Thermal Stability for Plasmonic Applications at High Temperatures
- Open Access
- 1 March 2024
- Published by Wiley in Advanced Optical Materials
- Vol. 12 (13)
Refractory Plasmonics of Reactively Sputtered Hafnium Nitride Nanoparticles: Pushing Limits
High‐temperature plasmonics deals with optically active nanostructures that can withstand high temperatures. A conventional approach relying on standalone noble metal nanoparticles fails to deliver refractory plasmonic nanomaterials, and an alternative route envisions metal nitrides. The main challenge remains the development of advanced synthesis techniques and the insight into thermal stability under real‐life application conditions. Here, hafnium nitride nanoparticles (HfN NPs) can be produced by gas aggregation using reactive magnetron sputtering, a technique with a small environmental footprint are shown. As‐deposited NPs are of 10 nm mean size and consist of stoichiometric, crystalline fcc HfN. They are characterized by optical absorption below 500 nm caused by interband transitions and in the red/near‐infrared (NIR) region due to intraband transitions and localized surface plasmon resonance (LSPR). The optical response can be engineered by tuning the NP composition as predicted by finite‐difference time‐domain (FDTD) calculations. Going beyond the state‐of‐the‐art, the HfN NP thermal stability is focued under ultrahigh vacuum (UHV) and in air. During UHV annealing to 850 °C, the NPs retain their morphology, chemical and optical properties, which makes them attractive in space mission and other applications. During air annealing to 800 °C, HfN NPs remain stable until 250 °C, which sets a limit for air‐mediated use.
- 1 March 2024
- Published by Wiley in Advanced Optical Materials
- Vol. 12 (13)
Open AccessRefractory Plasmonics of Reactively Sputtered Hafnium Nitride Nanoparticles: Pushing Limits
High‐temperature plasmonics deals with optically active nanostructures that can withstand high temperatures. A conventional approach relying on standalone noble metal nanoparticles fails to deliver refractory plasmonic nanomaterials, and an alternative route envisions metal nitrides. The main challenge remains the development of advanced synthesis techniques and the insight into thermal stability under real‐life application conditions. Here, hafnium nitride nanoparticles (HfN NPs) can be produced by gas aggregation using reactive magnetron sputtering, a technique with a small environmental footprint are shown. As‐deposited NPs are of 10 nm mean size and consist of stoichiometric, crystalline fcc HfN. They are characterized by optical absorption below 500 nm caused by interband transitions and in the red/near‐infrared (NIR) region due to intraband transitions and localized surface plasmon resonance (LSPR). The optical response can be engineered by tuning the NP composition as predicted by finite‐difference time‐domain (FDTD) calculations. Going beyond the state‐of‐the‐art, the HfN NP thermal stability is focued under ultrahigh vacuum (UHV) and in air. During UHV annealing to 850 °C, the NPs retain their morphology, chemical and optical properties, which makes them attractive in space mission and other applications. During air annealing to 800 °C, HfN NPs remain stable until 250 °C, which sets a limit for air‐mediated use.
- Open Access
- 22 December 2023
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 16 (5) , 2452-2465
One-step synthesis of photoluminescent nanofluids by direct loading of reactively sputtered cubic ZrN nanoparticles into organic liquids
Sputtering of Zr in Ar/N 2 produces stoichiometric, crystalline, conductive, and plasmonic ZrN nanoparticles that can be directly loaded into liquids.
- 22 December 2023
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 16 (5) , 2452-2465
Open AccessOne-step synthesis of photoluminescent nanofluids by direct loading of reactively sputtered cubic ZrN nanoparticles into organic liquids
Sputtering of Zr in Ar/N 2 produces stoichiometric, crystalline, conductive, and plasmonic ZrN nanoparticles that can be directly loaded into liquids.
- Open Access
- 8 December 2023
- Published by Wiley in Advanced Functional Materials
- Vol. 34 (12)
Resistive Switching Effect in Ag‐poly(ethylene Glycol) Nanofluids: Novel Avenue Toward Neuromorphic Materials
Conventional computation techniques face challenges of deviations in Moore's law and the high‐power consumption of data‐centric computation tasks. Neuromorphic engineering attempts to overcome these issues by taking inspiration from neuron assemblies, ranging from distributed synaptic plasticity through orchestration of oscillator‐like action potential toward avalanche dynamics. Although solid networks of nanoparticles (NPs) are proven to replicate fingerprints of criticality and brain‐like dynamics, the aspect of dynamic spatial reconfigurations in the connectivity of networks remains unexplored. In this work, Ag/poly(ethylene glycol) (PEG) nanofluids are demonstrated as potential systems to mimic the spatio‐temporal reconfiguration of network connections. The nanofluids are prepared by directly loading Ag NPs from the gas aggregation cluster source into liquid PEG. The NPs exhibit a negative zeta potential in PEG; if the potential difference is applied between two electrodes submerged in this nanofluid, the NPs migrate toward the anode, accumulate in its vicinity, and form a conductive path. Spikes of electric current passing through the path are detected, accompanied by resistive switching phenomena, similar to the random switching dynamics in solid NPs networks. The unique behavior of Ag/PEG nanofluids makes them promising for the realization of spatio‐temporal reconfigurations in network topologies with the potential to transition to 3D.
- 8 December 2023
- Published by Wiley in Advanced Functional Materials
- Vol. 34 (12)
Open AccessResistive Switching Effect in Ag‐poly(ethylene Glycol) Nanofluids: Novel Avenue Toward Neuromorphic Materials
Conventional computation techniques face challenges of deviations in Moore's law and the high‐power consumption of data‐centric computation tasks. Neuromorphic engineering attempts to overcome these issues by taking inspiration from neuron assemblies, ranging from distributed synaptic plasticity through orchestration of oscillator‐like action potential toward avalanche dynamics. Although solid networks of nanoparticles (NPs) are proven to replicate fingerprints of criticality and brain‐like dynamics, the aspect of dynamic spatial reconfigurations in the connectivity of networks remains unexplored. In this work, Ag/poly(ethylene glycol) (PEG) nanofluids are demonstrated as potential systems to mimic the spatio‐temporal reconfiguration of network connections. The nanofluids are prepared by directly loading Ag NPs from the gas aggregation cluster source into liquid PEG. The NPs exhibit a negative zeta potential in PEG; if the potential difference is applied between two electrodes submerged in this nanofluid, the NPs migrate toward the anode, accumulate in its vicinity, and form a conductive path. Spikes of electric current passing through the path are detected, accompanied by resistive switching phenomena, similar to the random switching dynamics in solid NPs networks. The unique behavior of Ag/PEG nanofluids makes them promising for the realization of spatio‐temporal reconfigurations in network topologies with the potential to transition to 3D.
- 11 August 2023
- Published by Elsevier in Applied Surface Science
- Vol. 639
A multi-timescale model predicts the spherical-to-cubic morphology crossover of magnetron-sputtered niobium nanoparticles
- 11 August 2023
- Published by Elsevier in Applied Surface Science
- Vol. 639
A multi-timescale model predicts the spherical-to-cubic morphology crossover of magnetron-sputtered niobium nanoparticles