Yun Goo Ro
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Yun Goo Ro has a total of 58 co-authors. Here are the top co-authors by number of shared publications:
- Hyunhyub Ko
Ulsan National Institute of Science and Technology (UNIST)
7 shared publications - Cheolhong Park
School of Energy and Chemical Engineering, Ulsan National Institute of Science and Technology (UNIST), Ulsan Metropolitan City, Republic of Korea
5 shared publications Jeeyoon Kim
School of Energy and Chemical Engineering Ulsan National Institute of Science and Technology (UNIST) Ulsan Metropolitan City Republic of Korea
5 shared publicationsSangyun Na
School of Energy and Chemical Engineering, Ulsan National Institute of Science and Technology (UNIST), Ulsan Metropolitan City, Republic of Korea
5 shared publicationsYoojin Chang
School of Energy and Chemical Engineering Ulsan National Institute of Science and Technology (UNIST) Ulsan Metropolitan City Republic of Korea
4 shared publications- Hyeji Oh
School of Energy and Chemical Engineering Ulsan National Institute of Science and Technology (UNIST) Ulsan Metropolitan City Republic of Korea
2 shared publications
Latest Publications
- Open Access
- 12 August 2026
- Published by Wiley in Advanced Materials
- Vol. 38 (57)
Confinement‐Induced Donnan Potential Enables Sealed Hydrovoltaic Power From Microliter Water
Hydrovoltaic power generation offers a promising route for sustainable energy generation, yet existing systems typically rely on evaporation‐driven flow or environmental moisture gradients, limiting device encapsulation and compact integration. Here, we introduce a confinement‐induced ion‐selective mechanism that enables sealed hydrovoltaic power generation from minimal water input. By engineering asymmetric nanochannel confinement in MXene/cellulose nanofiber (CNF) composites, localized hydration generates spatially distinct cation selectivity, establishing a persistent ion gradient and a confinement‐dependent Donnan potential that drives capacitive charge accumulation. The harvested energy derives from substantial interfacial free energy released upon hydration of nanochannels with a high surface‐to‐volume ratio. Slow capillary migration then delays relaxation of the ion gradient, sustaining this charging and prolonging the resulting direct current (DC) output, without reliance on evaporation‐driven flow or ambient humidity. Consequently, a single 3 µL water droplet enables stable DC output for up to 45 h. The device operates robustly under airflow (5–20 L min −1 ), relative humidity (17%–90%), and various electrolytes (tap water, seawater, and sweat), demonstrating humidity‐insensitive, sealed operation. This confinement‐governed hydrovoltaic framework expands the mechanistic understanding of water‐enabled energy generation and provides a scalable platform for wearable and distributed electronics.
- 12 August 2026
- Published by Wiley in Advanced Materials
- Vol. 38 (57)
Open AccessConfinement‐Induced Donnan Potential Enables Sealed Hydrovoltaic Power From Microliter Water
Hydrovoltaic power generation offers a promising route for sustainable energy generation, yet existing systems typically rely on evaporation‐driven flow or environmental moisture gradients, limiting device encapsulation and compact integration. Here, we introduce a confinement‐induced ion‐selective mechanism that enables sealed hydrovoltaic power generation from minimal water input. By engineering asymmetric nanochannel confinement in MXene/cellulose nanofiber (CNF) composites, localized hydration generates spatially distinct cation selectivity, establishing a persistent ion gradient and a confinement‐dependent Donnan potential that drives capacitive charge accumulation. The harvested energy derives from substantial interfacial free energy released upon hydration of nanochannels with a high surface‐to‐volume ratio. Slow capillary migration then delays relaxation of the ion gradient, sustaining this charging and prolonging the resulting direct current (DC) output, without reliance on evaporation‐driven flow or ambient humidity. Consequently, a single 3 µL water droplet enables stable DC output for up to 45 h. The device operates robustly under airflow (5–20 L min −1 ), relative humidity (17%–90%), and various electrolytes (tap water, seawater, and sweat), demonstrating humidity‐insensitive, sealed operation. This confinement‐governed hydrovoltaic framework expands the mechanistic understanding of water‐enabled energy generation and provides a scalable platform for wearable and distributed electronics.
- Open Access
- 30 June 2026
- Published by Wiley in Advanced Materials
- Vol. 38 (55) , e23703
Monolithic 3D‐Integrated All‐Solid Ion‐Gated Carbon Nanotube Transistors With Tunable Ionic Conductance for Multi‐Timescale Reservoir Computing
Ion‐gated transistors inherently exhibit time‐dependent behavior governed by ionic motion associated with electric double‐layer formation; however, their practical implementation has been limited by insufficient control over ionic dynamics and poor compatibility with scalable thin‐film integration. Here, we present carbon nanotube (CNT) solid‐ion‐gated transistors (sIGTs) that allow the wide‐range engineering of ionic dynamics while remaining fully compatible with wafer‐scale thin‐film processing. Tunable ionic conductance is achieved by ionic content engineering in the film and thickness scaling into the sub‐micron regime, enabling ionic time constants from microseconds to milliseconds. CNT sIGTs demonstrate robust DC operation at low ionic content with an optimized polymer matrix and wafer‐scale fabrication on flexible substrates. Frequency‐dependent gate modulation governed by ionic conductance is systematically investigated through electrical impedance spectroscopy and small‐signal analysis, including a comparison of the −3 dB cutoff frequency and the transit frequency. This analysis provides direct insight into the relationship between ionic conductance and frequency‐dependent device response, exhibiting consistent trends across both two‐terminal and three‐terminal device configurations. Monolithic three‐dimensional integration of two‐tier CNT sIGTs with engineered dynamic responses is demonstrated as a compact dual‐timescale physical reservoir for neuromorphic computing that enables classification of time‐varying inputs using a single readout layer.
- 30 June 2026
- Published by Wiley in Advanced Materials
- Vol. 38 (55) , e23703
Open AccessMonolithic 3D‐Integrated All‐Solid Ion‐Gated Carbon Nanotube Transistors With Tunable Ionic Conductance for Multi‐Timescale Reservoir Computing
Ion‐gated transistors inherently exhibit time‐dependent behavior governed by ionic motion associated with electric double‐layer formation; however, their practical implementation has been limited by insufficient control over ionic dynamics and poor compatibility with scalable thin‐film integration. Here, we present carbon nanotube (CNT) solid‐ion‐gated transistors (sIGTs) that allow the wide‐range engineering of ionic dynamics while remaining fully compatible with wafer‐scale thin‐film processing. Tunable ionic conductance is achieved by ionic content engineering in the film and thickness scaling into the sub‐micron regime, enabling ionic time constants from microseconds to milliseconds. CNT sIGTs demonstrate robust DC operation at low ionic content with an optimized polymer matrix and wafer‐scale fabrication on flexible substrates. Frequency‐dependent gate modulation governed by ionic conductance is systematically investigated through electrical impedance spectroscopy and small‐signal analysis, including a comparison of the −3 dB cutoff frequency and the transit frequency. This analysis provides direct insight into the relationship between ionic conductance and frequency‐dependent device response, exhibiting consistent trends across both two‐terminal and three‐terminal device configurations. Monolithic three‐dimensional integration of two‐tier CNT sIGTs with engineered dynamic responses is demonstrated as a compact dual‐timescale physical reservoir for neuromorphic computing that enables classification of time‐varying inputs using a single readout layer.
- Open Access
- 27 November 2025
- Published by Springer Nature in Nature Communications
- Vol. 16 (1) , 10610
Robust biodegradable synapse with sub-biological energy and extended memory for intelligent reflexive system
Biodegradable artificial synapses hold great promise for sustainable neuromorphic electronics, yet combining long-term memory, ultralow energy consumption, and mechanical robustness remains challenging. Here, we report a fully biodegradable multilayer artificial synapse (M-AS) composed of crosslinked chitosan–guar gum (CS–GG) ion-active layers (IALs) and a cellulose acetate (CA) ion-binding layer (IBL). This trilayer architecture enhances ion trapping via ion-dipole coupling (IDC) at the IAL–IBL interface, while hydrogen-bonded crosslinking within the CS–GG matrix enhances mechanical and environmental stability. Sodium chloride, embedded in the IALs, serves as a mobile ionic species analogous to biological neurotransmitters, enabling low-voltage ion migration. Upon electrical stimulation, ion migration and dipole alignment induce IDC, leading to partial ion retention and cascade-like postsynaptic current responses that support memory formation. The M-AS supports key synaptic functionalities—including paired-pulse facilitation, short-term and long-term plasticity, multilevel memory encoding, and bidirectional modulation—under sub-millivolt operation. It achieves the longest long-term memory time (5944 s) reported among biodegradable artificial synapses and an energy consumption (0.85 fJ/event) lower than that of biological synapses. Integration with a thermistor and robotic actuator enables a bioinspired reflexive system capable of adaptive, stimulus-dependent learning and reflex-like behaviors. These results demonstrate the potential of M-AS for low-power, intelligent human–machine interfaces.
- 27 November 2025
- Published by Springer Nature in Nature Communications
- Vol. 16 (1) , 10610
Open AccessRobust biodegradable synapse with sub-biological energy and extended memory for intelligent reflexive system
Biodegradable artificial synapses hold great promise for sustainable neuromorphic electronics, yet combining long-term memory, ultralow energy consumption, and mechanical robustness remains challenging. Here, we report a fully biodegradable multilayer artificial synapse (M-AS) composed of crosslinked chitosan–guar gum (CS–GG) ion-active layers (IALs) and a cellulose acetate (CA) ion-binding layer (IBL). This trilayer architecture enhances ion trapping via ion-dipole coupling (IDC) at the IAL–IBL interface, while hydrogen-bonded crosslinking within the CS–GG matrix enhances mechanical and environmental stability. Sodium chloride, embedded in the IALs, serves as a mobile ionic species analogous to biological neurotransmitters, enabling low-voltage ion migration. Upon electrical stimulation, ion migration and dipole alignment induce IDC, leading to partial ion retention and cascade-like postsynaptic current responses that support memory formation. The M-AS supports key synaptic functionalities—including paired-pulse facilitation, short-term and long-term plasticity, multilevel memory encoding, and bidirectional modulation—under sub-millivolt operation. It achieves the longest long-term memory time (5944 s) reported among biodegradable artificial synapses and an energy consumption (0.85 fJ/event) lower than that of biological synapses. Integration with a thermistor and robotic actuator enables a bioinspired reflexive system capable of adaptive, stimulus-dependent learning and reflex-like behaviors. These results demonstrate the potential of M-AS for low-power, intelligent human–machine interfaces.
- Open Access
- 19 November 2025
- Published by Wiley in Advanced Science
- Vol. 13 (16) , e13985
Ionic–Bionic Interfaces: Advancing Iontronic Strategies for Bioelectronic Sensing and Therapy
Iontronic bioelectronics provides a powerful framework for bridging the mismatch between conventional electronic systems and soft, ion‐mediated biological tissues. By harnessing mobile ions as charge carriers and functional mediators, iontronic devices enable biocompatible, conformal, and low‐impedance interfaces that support both signal acquisition and therapeutic delivery. Recent advances in ionic materials, such as hydrogels, ion gels, and ionic liquids, have facilitated high‐fidelity physiological sensing, wound monitoring, and programmable drug and ion release. In addition to passive sensing and delivery, emerging iontronic platforms integrate real‐time biosignal monitoring with adaptive, AI‐guided feedback to enable closed‐loop therapeutic control. This review highlights the multifunctional role of ions in sensing, modulation, and stimulation across diverse applications, including skin‐interfaced electronics, neural and cardiac interfaces, and wound therapy. Key challenges such as operational stability, signal specificity, and long‐term biocompatibility are further examined, and material, structural, and system‐level innovations that are paving the way toward intelligent, responsive, and clinically viable iontronic bioelectronic platforms are discussed.
- 19 November 2025
- Published by Wiley in Advanced Science
- Vol. 13 (16) , e13985
Open AccessIonic–Bionic Interfaces: Advancing Iontronic Strategies for Bioelectronic Sensing and Therapy
Iontronic bioelectronics provides a powerful framework for bridging the mismatch between conventional electronic systems and soft, ion‐mediated biological tissues. By harnessing mobile ions as charge carriers and functional mediators, iontronic devices enable biocompatible, conformal, and low‐impedance interfaces that support both signal acquisition and therapeutic delivery. Recent advances in ionic materials, such as hydrogels, ion gels, and ionic liquids, have facilitated high‐fidelity physiological sensing, wound monitoring, and programmable drug and ion release. In addition to passive sensing and delivery, emerging iontronic platforms integrate real‐time biosignal monitoring with adaptive, AI‐guided feedback to enable closed‐loop therapeutic control. This review highlights the multifunctional role of ions in sensing, modulation, and stimulation across diverse applications, including skin‐interfaced electronics, neural and cardiac interfaces, and wound therapy. Key challenges such as operational stability, signal specificity, and long‐term biocompatibility are further examined, and material, structural, and system‐level innovations that are paving the way toward intelligent, responsive, and clinically viable iontronic bioelectronic platforms are discussed.
- 3 July 2025
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 19 (27) , 24425-24507
Iontronics: Neuromorphic Sensing and Energy Harvesting
Iontronics are rapidly emerging technologies with strong potential in sensing and energy harvesting. By leveraging ion transport, electrochemical interactions, and electron-ion coupling, iontronic systems have driven advancements in intelligent sensing and sustainable energy harvesting. This review explores the efficiency and suitability of iontronics for next-generation sensing and energy harvesting applications, emphasizing their advantages over conventional electronic approaches. We provide a comprehensive summary of the latest technological developments in iontronic neuromorphic sensors and energy harvesters, particularly focusing on working mechanisms of iontronic devices driven by ion dynamics, which facilitate the development of intelligent and energy-efficient sensing and harvesting devices. Understanding these fundamental mechanisms enables the optimization of iontronic materials and device structures for enhanced functionality and broader applications. Finally, this review discusses the current challenges and future directions in advanced iontronic sensing and energy harvesting technologies, providing insights into how continued research and development can further enhance their capabilities and technological integration in practical applications.
- 3 July 2025
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 19 (27) , 24425-24507
Iontronics: Neuromorphic Sensing and Energy Harvesting
Iontronics are rapidly emerging technologies with strong potential in sensing and energy harvesting. By leveraging ion transport, electrochemical interactions, and electron-ion coupling, iontronic systems have driven advancements in intelligent sensing and sustainable energy harvesting. This review explores the efficiency and suitability of iontronics for next-generation sensing and energy harvesting applications, emphasizing their advantages over conventional electronic approaches. We provide a comprehensive summary of the latest technological developments in iontronic neuromorphic sensors and energy harvesters, particularly focusing on working mechanisms of iontronic devices driven by ion dynamics, which facilitate the development of intelligent and energy-efficient sensing and harvesting devices. Understanding these fundamental mechanisms enables the optimization of iontronic materials and device structures for enhanced functionality and broader applications. Finally, this review discusses the current challenges and future directions in advanced iontronic sensing and energy harvesting technologies, providing insights into how continued research and development can further enhance their capabilities and technological integration in practical applications.
- Top Cited PapersOpen Access
- 17 January 2024
- Published by Springer Nature in Nature Communications
- Vol. 15 (1) , 1-13
Flexible, scalable, high channel count stereo-electrode for recording in the human brain
Over the past decade, stereotactically placed electrodes have become the gold standard for deep brain recording and stimulation for a wide variety of neurological and psychiatric diseases. Current electrodes, however, are limited in their spatial resolution and ability to record from small populations of neurons, let alone individual neurons. Here, we report on an innovative, customizable, monolithically integrated human-grade flexible depth electrode capable of recording from up to 128 channels and able to record at a depth of 10 cm in brain tissue. This thin, stylet-guided depth electrode is capable of recording local field potentials and single unit neuronal activity (action potentials), validated across species. This device represents an advance in manufacturing and design approaches which extends the capabilities of a mainstay technology in clinical neurology.
- 17 January 2024
- Published by Springer Nature in Nature Communications
- Vol. 15 (1) , 1-13
Top Cited PapersOpen AccessFlexible, scalable, high channel count stereo-electrode for recording in the human brain
Over the past decade, stereotactically placed electrodes have become the gold standard for deep brain recording and stimulation for a wide variety of neurological and psychiatric diseases. Current electrodes, however, are limited in their spatial resolution and ability to record from small populations of neurons, let alone individual neurons. Here, we report on an innovative, customizable, monolithically integrated human-grade flexible depth electrode capable of recording from up to 128 channels and able to record at a depth of 10 cm in brain tissue. This thin, stylet-guided depth electrode is capable of recording local field potentials and single unit neuronal activity (action potentials), validated across species. This device represents an advance in manufacturing and design approaches which extends the capabilities of a mainstay technology in clinical neurology.
- Open Access
- 27 October 2023
- Published by Wiley in Advanced Science
- Vol. 10 (36) , e2304598
Multi‐Layered Triboelectric Nanogenerators with Controllable Multiple Spikes for Low‐Power Artificial Synaptic Devices
In the domains of wearable electronics, robotics, and the Internet of Things, there is a demand for devices with low power consumption and the capability of multiplex sensing, memory, and learning. Triboelectric nanogenerators (TENGs) offer remarkable versatility in this regard, particularly when integrated with synaptic transistors that mimic biological synapses. However, conventional TENGs, generating only two spikes per cycle, have limitations when used in synaptic devices requiring repetitive high‐frequency gating signals to perform various synaptic plasticity functions. Herein, a multi‐layered micropatterned TENG (M‐TENG) consisting of a polydimethylsiloxane (PDMS) film and a composite film that includes 1H,1H,2H,2H‐perfluorooctyltrichlorosilane/BaTiO3/PDMS are proposed. The M‐TENG generates multiple spikes from a single touch by utilizing separate triboelectric charges at the multiple friction layers, along with a contact/separation delay achieved by distinct spacers between layers. This configuration allows the maximum triboelectric output charge of M‐TENG to reach up to 7.52 nC, compared to 3.69 nC for a single‐layered TENG. Furthermore, by integrating M‐TENGs with an organic electrochemical transistor, the spike number multiplication property of M‐TENGs is leveraged to demonstrate an artificial synaptic device with low energy consumption. As a proof‐of‐concept application, a robotic hand is operated through continuous memory training under repeated stimulations, successfully emulating long‐term plasticity.
- 27 October 2023
- Published by Wiley in Advanced Science
- Vol. 10 (36) , e2304598
Open AccessMulti‐Layered Triboelectric Nanogenerators with Controllable Multiple Spikes for Low‐Power Artificial Synaptic Devices
In the domains of wearable electronics, robotics, and the Internet of Things, there is a demand for devices with low power consumption and the capability of multiplex sensing, memory, and learning. Triboelectric nanogenerators (TENGs) offer remarkable versatility in this regard, particularly when integrated with synaptic transistors that mimic biological synapses. However, conventional TENGs, generating only two spikes per cycle, have limitations when used in synaptic devices requiring repetitive high‐frequency gating signals to perform various synaptic plasticity functions. Herein, a multi‐layered micropatterned TENG (M‐TENG) consisting of a polydimethylsiloxane (PDMS) film and a composite film that includes 1H,1H,2H,2H‐perfluorooctyltrichlorosilane/BaTiO3/PDMS are proposed. The M‐TENG generates multiple spikes from a single touch by utilizing separate triboelectric charges at the multiple friction layers, along with a contact/separation delay achieved by distinct spacers between layers. This configuration allows the maximum triboelectric output charge of M‐TENG to reach up to 7.52 nC, compared to 3.69 nC for a single‐layered TENG. Furthermore, by integrating M‐TENGs with an organic electrochemical transistor, the spike number multiplication property of M‐TENGs is leveraged to demonstrate an artificial synaptic device with low energy consumption. As a proof‐of‐concept application, a robotic hand is operated through continuous memory training under repeated stimulations, successfully emulating long‐term plasticity.
- Open Access
- 23 January 2023
- Published by Springer Nature in Nature Communications
- Vol. 14 (1) , 1-11
Photosensitive ion channels in layered MXene membranes modified with plasmonic gold nanostars and cellulose nanofibers
Ion channels transduce external stimuli into ion-transport-mediated signaling, which has received considerable attention in diverse fields such as sensors, energy harvesting devices, and desalination membrane. In this work, we present a photosensitive ion channel based on plasmonic gold nanostars (AuNSs) and cellulose nanofibers (CNFs) embedded in layered MXene nanosheets. The MXene/AuNS/CNF (MAC) membrane provides subnanometer-sized ionic pathways for light-sensitive cationic flow. When the MAC nanochannel is exposed to NIR light, a photothermal gradient is formed, which induces directional photothermo-osmotic flow of nanoconfined electrolyte against the thermal gradient and produces a net ionic current. MAC membrane exhibits enhanced photothermal current compared with pristine MXene, which is attributed to the combined photothermal effects of plasmonic AuNSs and MXene and the widened interspacing of the MAC composite via the hydrophilic nanofibrils. The MAC composite membranes are envisioned to be applied in flexible ionic channels with ionogels and light-controlled ionic circuits.
- 23 January 2023
- Published by Springer Nature in Nature Communications
- Vol. 14 (1) , 1-11
Open AccessPhotosensitive ion channels in layered MXene membranes modified with plasmonic gold nanostars and cellulose nanofibers
Ion channels transduce external stimuli into ion-transport-mediated signaling, which has received considerable attention in diverse fields such as sensors, energy harvesting devices, and desalination membrane. In this work, we present a photosensitive ion channel based on plasmonic gold nanostars (AuNSs) and cellulose nanofibers (CNFs) embedded in layered MXene nanosheets. The MXene/AuNS/CNF (MAC) membrane provides subnanometer-sized ionic pathways for light-sensitive cationic flow. When the MAC nanochannel is exposed to NIR light, a photothermal gradient is formed, which induces directional photothermo-osmotic flow of nanoconfined electrolyte against the thermal gradient and produces a net ionic current. MAC membrane exhibits enhanced photothermal current compared with pristine MXene, which is attributed to the combined photothermal effects of plasmonic AuNSs and MXene and the widened interspacing of the MAC composite via the hydrophilic nanofibrils. The MAC composite membranes are envisioned to be applied in flexible ionic channels with ionogels and light-controlled ionic circuits.