Ghadah Khaled Bahamdan
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Ghadah Khaled Bahamdan has a total of 38 co-authors. Here are the top co-authors by number of shared publications:
- Robina Tasleem
Department of Prosthodontics, College of Dentistry, King Khalid University, Abha 62529, Saudi Arabia
3 shared publications - Shaeesta Khaleelahmed Bhavikatti
Department of Periodontics, School of Dental Sciences, Universiti Sains Malaysia, Health Campus, Kubang Kerian 16150, Kelantan, Malaysia
3 shared publications - Munivenkatappa Laxmaiah Venkatesh Prabhuji
Krishnadevaraya College of Dental Sciences
2 shared publications - Rashmi Paramashivaiah
Department of Periodontology, Krishnadevaraya College of Dental Sciences, Rajiv Gandhi University of Health Sciences, Bangalore 562157, India
2 shared publications - Ahmed A. Albariqi
Department of Periodontics and Community Dentistry, College of Dentistry, King Khalid University, Abha, Saudi Arabia
1 shared publication - Ahmed Ibrahim Foudah
Department of Pharmacognosy, College of Pharmacy, Prince Sattam Bin Abdulaziz University, Al-Kharj, Saudi Arabia
1 shared publication
Latest Publications
- Open Access
- 14 October 2026
- Published by MDPI AG in Dentistry Journal
- Vol. 14 (10) , 672
Smart Toothbrushes and AI-Assisted Oral Hygiene Monitoring for Plaque Control, Gingival Health, and Periodontal Care: A Narrative Review
Effective toothbrushing is central to plaque control and periodontal health, yet brushing technique and adherence are often inadequate. Smart toothbrushes and digitally assisted oral hygiene systems record brushing behaviour and return feedback to patients and, in some models, to clinicians. This narrative review, prepared with reference to the SANRA checklist, drew on PubMed/MEDLINE, Scopus, Web of Science, the Cochrane Library, and Google Scholar using a targeted, non-systematic search for publications from January 2012 to February 2026. Eighteen primary studies are summarised in detail. Sensor-based and app-connected systems improved plaque scores, gingival bleeding, brushing behaviour, and, in some studies, adherence, mostly over follow-up periods of 2 weeks to 6 months. Two randomised trials in patients with periodontitis reported additional short-term improvements in periodontal parameters when AI-assisted monitoring was added to periodontal care. However, many commercial devices use fixed thresholds rather than adaptive machine learning, and most trials cannot separate the effects of powered brushing, feedback, app support, and AI. Current evidence suggests that smart toothbrushes and digitally assisted oral hygiene systems may improve plaque control, brushing behaviour, adherence, and short-term gingival outcomes. The incremental benefit specifically attributable to AI-based functions and their impact on long-term periodontal outcomes remain to be established.
- 14 October 2026
- Published by MDPI AG in Dentistry Journal
- Vol. 14 (10) , 672
Open AccessSmart Toothbrushes and AI-Assisted Oral Hygiene Monitoring for Plaque Control, Gingival Health, and Periodontal Care: A Narrative Review
Effective toothbrushing is central to plaque control and periodontal health, yet brushing technique and adherence are often inadequate. Smart toothbrushes and digitally assisted oral hygiene systems record brushing behaviour and return feedback to patients and, in some models, to clinicians. This narrative review, prepared with reference to the SANRA checklist, drew on PubMed/MEDLINE, Scopus, Web of Science, the Cochrane Library, and Google Scholar using a targeted, non-systematic search for publications from January 2012 to February 2026. Eighteen primary studies are summarised in detail. Sensor-based and app-connected systems improved plaque scores, gingival bleeding, brushing behaviour, and, in some studies, adherence, mostly over follow-up periods of 2 weeks to 6 months. Two randomised trials in patients with periodontitis reported additional short-term improvements in periodontal parameters when AI-assisted monitoring was added to periodontal care. However, many commercial devices use fixed thresholds rather than adaptive machine learning, and most trials cannot separate the effects of powered brushing, feedback, app support, and AI. Current evidence suggests that smart toothbrushes and digitally assisted oral hygiene systems may improve plaque control, brushing behaviour, adherence, and short-term gingival outcomes. The incremental benefit specifically attributable to AI-based functions and their impact on long-term periodontal outcomes remain to be established.
- Open Access
- 1 May 2026
- Published by Wolters Kluwer Health in Medicine
- Vol. 105 (18) , e48618
Minimally invasive management of lower midline diastema: A case report and literature review
Rationale: Midline diastema is an unpleasant condition that affects a patient’s smile and causes significant aesthetic concerns. Treating diastema and achieving the desired aesthetics, function, and harmony can be challenging without invasive treatment. This case report demonstrates a minimally invasive approach to closing a lower midline diastema. Patient concerns: A 38-year-old female patient presented to the dental clinic at King Khalid University with the primary complaint of a “large space in the lower front tooth region.” Her medical history indicated no significant health concerns. Diagnoses: The patient was diagnosed with localized periodontitis, stage III, grade B. She presented with a Miller class III gingival recession at the lower central incisors, an aberrant frenum, a decreased width of keratinized gingiva, and a midline diastema of 6 mm. Interventions: A free gingival graft is used to increase the width of the keratinized gingiva, followed by the placement of a zirconia resin-bonded bridge to close the space. Outcomes: The treatment yielded a satisfactory outcome, as evidenced by an increase in the width of keratinized gingiva from 1 mm at baseline to 5 mm at 4 months and a gain of 1 to 2 mm in clinical attachment level. Two months following surgery, complete closure of a 6-mm lower midline diastema was successfully achieved using a zirconia resin-bonded bridge. Lessons: The use of a free gingival graft effectively increases the width of the keratinized gingiva. A resin-bonded bridge offers satisfactory aesthetics and functionality, providing a conservative treatment that makes it a favorable option for closing lower midline diastema compared with more invasive and time-consuming procedures, such as bone grafting or orthodontic treatment.
- 1 May 2026
- Published by Wolters Kluwer Health in Medicine
- Vol. 105 (18) , e48618
Open AccessMinimally invasive management of lower midline diastema: A case report and literature review
Rationale: Midline diastema is an unpleasant condition that affects a patient’s smile and causes significant aesthetic concerns. Treating diastema and achieving the desired aesthetics, function, and harmony can be challenging without invasive treatment. This case report demonstrates a minimally invasive approach to closing a lower midline diastema. Patient concerns: A 38-year-old female patient presented to the dental clinic at King Khalid University with the primary complaint of a “large space in the lower front tooth region.” Her medical history indicated no significant health concerns. Diagnoses: The patient was diagnosed with localized periodontitis, stage III, grade B. She presented with a Miller class III gingival recession at the lower central incisors, an aberrant frenum, a decreased width of keratinized gingiva, and a midline diastema of 6 mm. Interventions: A free gingival graft is used to increase the width of the keratinized gingiva, followed by the placement of a zirconia resin-bonded bridge to close the space. Outcomes: The treatment yielded a satisfactory outcome, as evidenced by an increase in the width of keratinized gingiva from 1 mm at baseline to 5 mm at 4 months and a gain of 1 to 2 mm in clinical attachment level. Two months following surgery, complete closure of a 6-mm lower midline diastema was successfully achieved using a zirconia resin-bonded bridge. Lessons: The use of a free gingival graft effectively increases the width of the keratinized gingiva. A resin-bonded bridge offers satisfactory aesthetics and functionality, providing a conservative treatment that makes it a favorable option for closing lower midline diastema compared with more invasive and time-consuming procedures, such as bone grafting or orthodontic treatment.
- Open Access
- 23 May 2025
- Published by MDPI AG in Healthcare
- Vol. 13 (11) , 1224
Global Trends and Emerging Frontiers in Smoking and Smokeless Tobacco Research: A Bibliometric Analysis over the Past Decade
Tobacco use remains a critical global health issue, with extensive research focusing on its impact on public health, particularly its strong association with oral cavity cancer. It is a leading cause of preventable disease and death worldwide, affecting millions each year. Despite increased awareness and regulatory measures, tobacco continues to pose significant challenges, prompting ongoing investigations into its health effects and related behaviors. Objective: This study aims to conduct a bibliometric analysis of smoking and smokeless tobacco research from 2014 to 2024, focusing on identifying key research trends, influential contributors, emerging topics, and collaborative networks on a global scale. Methods: A dataset of 2694 research papers from PubMed was analyzed using bibliometric tools. Keyword co-occurrence, authorship patterns, and institutional collaborations were mapped to reveal dominant themes and trends. Additionally, country-specific publications were examined to assess geographical contributions and emerging research frontiers. Results: The analysis indicates a 7.3% annual increase in publications, with a peak in 2021 likely influenced by COVID-19. Research topics have shifted from traditional tobacco-related health impacts, such as lung cancer and cardiovascular diseases, to newer areas like e-cigarettes and social determinants of health. Strong international collaborations were noted, with the U.S., China, and Europe as dominant contributors. Emerging research frontiers include electronic nicotine delivery systems and strategies aimed at controlling tobacco-related health risks. Conclusion: This bibliometric study highlights significant growth in tobacco-related research over the past decade. Evolving trends reflect a shift toward newer tobacco products and public health challenges. These findings provide valuable insights for shaping future research agendas and informing global tobacco control policies.
- 23 May 2025
- Published by MDPI AG in Healthcare
- Vol. 13 (11) , 1224
Open AccessGlobal Trends and Emerging Frontiers in Smoking and Smokeless Tobacco Research: A Bibliometric Analysis over the Past Decade
Tobacco use remains a critical global health issue, with extensive research focusing on its impact on public health, particularly its strong association with oral cavity cancer. It is a leading cause of preventable disease and death worldwide, affecting millions each year. Despite increased awareness and regulatory measures, tobacco continues to pose significant challenges, prompting ongoing investigations into its health effects and related behaviors. Objective: This study aims to conduct a bibliometric analysis of smoking and smokeless tobacco research from 2014 to 2024, focusing on identifying key research trends, influential contributors, emerging topics, and collaborative networks on a global scale. Methods: A dataset of 2694 research papers from PubMed was analyzed using bibliometric tools. Keyword co-occurrence, authorship patterns, and institutional collaborations were mapped to reveal dominant themes and trends. Additionally, country-specific publications were examined to assess geographical contributions and emerging research frontiers. Results: The analysis indicates a 7.3% annual increase in publications, with a peak in 2021 likely influenced by COVID-19. Research topics have shifted from traditional tobacco-related health impacts, such as lung cancer and cardiovascular diseases, to newer areas like e-cigarettes and social determinants of health. Strong international collaborations were noted, with the U.S., China, and Europe as dominant contributors. Emerging research frontiers include electronic nicotine delivery systems and strategies aimed at controlling tobacco-related health risks. Conclusion: This bibliometric study highlights significant growth in tobacco-related research over the past decade. Evolving trends reflect a shift toward newer tobacco products and public health challenges. These findings provide valuable insights for shaping future research agendas and informing global tobacco control policies.
- Open Access
Alveolar Ridge Augmentation Assessment Using a Minimalistic Approach, with and without Low-Level Laser Therapy (LLLT)—A Comparative Clinical Trial
Background and Objective: A narrow alveolar ridge is an obstacle to optimal rehabilitation of the dentition. There are several complex and invasive techniques to counter the ridge augmentation dilemma, with most of them exhibiting low feasibility. Hence, this randomized clinical trial aims to evaluate the effectiveness of a Minimalistic Ridge Augmentation (MRA) technique, in conjunction with low-level laser therapy (LLLT). Materials and Methods: A total of 20 patients (n = 20) were selected, with 10 assigned to the test group (MRA+LLLT) and the other 10 to the control group (MRA). A vertical incision of approximately 10 mm was placed mesial to the defect and tunneled to create a subperiosteal pouch across the entire width of the defect. At the test sites, a diode laser (AnARC FoxTM Surgical Laser 810 nm) was used to deliver LLLT (parameters: 100 mW, with a maximum energy distribution of 6 J/cm2 in the continuous wave mode for 60 s per point) to the exposed bone surface inside the pouch, followed by graft (G-Graft, SurgiwearTM, Shahjahanpur, India) deposition with a bone graft carrier. The control sites were not irradiated with a laser. Results: A horizontal ridge width gain of >2 mm was observed in both groups. The changes in bone density for the test and control groups were −136 ± 236.08 HU and −44.30 ± 180.89 HU, respectively. Furthermore, there was no statistically significant difference between the test and control groups in these parameters. Conclusion: The study findings reveal that the MRA technique is relatively simple and feasible for alveolar ridge augmentation. The role of LLLT in the process requires further elucidation.
Open AccessAlveolar Ridge Augmentation Assessment Using a Minimalistic Approach, with and without Low-Level Laser Therapy (LLLT)—A Comparative Clinical Trial
Background and Objective: A narrow alveolar ridge is an obstacle to optimal rehabilitation of the dentition. There are several complex and invasive techniques to counter the ridge augmentation dilemma, with most of them exhibiting low feasibility. Hence, this randomized clinical trial aims to evaluate the effectiveness of a Minimalistic Ridge Augmentation (MRA) technique, in conjunction with low-level laser therapy (LLLT). Materials and Methods: A total of 20 patients (n = 20) were selected, with 10 assigned to the test group (MRA+LLLT) and the other 10 to the control group (MRA). A vertical incision of approximately 10 mm was placed mesial to the defect and tunneled to create a subperiosteal pouch across the entire width of the defect. At the test sites, a diode laser (AnARC FoxTM Surgical Laser 810 nm) was used to deliver LLLT (parameters: 100 mW, with a maximum energy distribution of 6 J/cm2 in the continuous wave mode for 60 s per point) to the exposed bone surface inside the pouch, followed by graft (G-Graft, SurgiwearTM, Shahjahanpur, India) deposition with a bone graft carrier. The control sites were not irradiated with a laser. Results: A horizontal ridge width gain of >2 mm was observed in both groups. The changes in bone density for the test and control groups were −136 ± 236.08 HU and −44.30 ± 180.89 HU, respectively. Furthermore, there was no statistically significant difference between the test and control groups in these parameters. Conclusion: The study findings reveal that the MRA technique is relatively simple and feasible for alveolar ridge augmentation. The role of LLLT in the process requires further elucidation.
- Open Access
- 9 March 2023
- Published by MDPI AG in Journal of Clinical Medicine
- Vol. 12 (6) , 2152
Antihyperglycemic Potential of Spondias mangifera Fruits via Inhibition of 11β-HSD Type 1 Enzyme: In Silico and In Vivo Approach
The 11 β- hydroxysteroid dehydrogenase 1 (11 β-HSD1) is hypothesized to play a role in the pathogenesis of type 2 diabetes and its related complications. Because high glucocorticoid levels are a risk factor for metabolic disorders, 11β-HSD1 might be a viable therapeutic target. In this investigation, docking experiments were performed on the main constituents of Spondias mangifera (SM) oleanolic acid, β-amyrin, and β-sitosterol to ascertain their affinity and binding interaction in the human 11β-hydroxysteroid dehydrogenase-1 enzyme’s active region. The results of in vitro 11β HSD1 inhibitory assay demonstrated that the extract of S. mangifera had a significant (p < 0.05) decrease in the 11-HSD1% inhibition (63.97%) in comparison to STZ (31.79%). Additionally, a non-insulin-dependent diabetic mice model was used to examine the sub-acute anti-hyperlipidemic and anti-diabetic effects of SM fruits. Results revealed that, in comparison to the diabetic control group, SM fruit extract (SMFE) extract at doses of 200 and 400 mg/kg body weight considerably (p < 0.05 and p < 0.01) lowered blood glucose levels at 21 and 28 days, as well as significantly decreased total cholesterol (TC) and triglycerides (TG) and enhanced the levels of high-density lipoprotein (HDL). After 120 and 180 s of receiving 200 and 400 mg/kg SMFE, respectively, disease control mice showed significantly poorer blood glucose tolerance (p < 0.05 and p < 0.01). SMFE extract 200 (p < 0.05), SMFE extract 400 (p < 0.01), and Glibenclamide at a dosage of 5 mg/kg body weight all resulted in statistically significant weight increase (p < 0.01) when compared to the diabetic control group after 28 days of treatment. According to in silico, in vitro, and in vivo validation, SMFE is a prospective medication with anti-diabetic and hypoglycemic effects.
- 9 March 2023
- Published by MDPI AG in Journal of Clinical Medicine
- Vol. 12 (6) , 2152
Open AccessAntihyperglycemic Potential of Spondias mangifera Fruits via Inhibition of 11β-HSD Type 1 Enzyme: In Silico and In Vivo Approach
The 11 β- hydroxysteroid dehydrogenase 1 (11 β-HSD1) is hypothesized to play a role in the pathogenesis of type 2 diabetes and its related complications. Because high glucocorticoid levels are a risk factor for metabolic disorders, 11β-HSD1 might be a viable therapeutic target. In this investigation, docking experiments were performed on the main constituents of Spondias mangifera (SM) oleanolic acid, β-amyrin, and β-sitosterol to ascertain their affinity and binding interaction in the human 11β-hydroxysteroid dehydrogenase-1 enzyme’s active region. The results of in vitro 11β HSD1 inhibitory assay demonstrated that the extract of S. mangifera had a significant (p < 0.05) decrease in the 11-HSD1% inhibition (63.97%) in comparison to STZ (31.79%). Additionally, a non-insulin-dependent diabetic mice model was used to examine the sub-acute anti-hyperlipidemic and anti-diabetic effects of SM fruits. Results revealed that, in comparison to the diabetic control group, SM fruit extract (SMFE) extract at doses of 200 and 400 mg/kg body weight considerably (p < 0.05 and p < 0.01) lowered blood glucose levels at 21 and 28 days, as well as significantly decreased total cholesterol (TC) and triglycerides (TG) and enhanced the levels of high-density lipoprotein (HDL). After 120 and 180 s of receiving 200 and 400 mg/kg SMFE, respectively, disease control mice showed significantly poorer blood glucose tolerance (p < 0.05 and p < 0.01). SMFE extract 200 (p < 0.05), SMFE extract 400 (p < 0.01), and Glibenclamide at a dosage of 5 mg/kg body weight all resulted in statistically significant weight increase (p < 0.01) when compared to the diabetic control group after 28 days of treatment. According to in silico, in vitro, and in vivo validation, SMFE is a prospective medication with anti-diabetic and hypoglycemic effects.
- Open Access
- 29 January 2023
- Published by MDPI AG in Applied Sciences
- Vol. 13 (3) , 1693
Regeneration of Intrabony Defects with Nano Hydroxyapatite Graft, Derived from Eggshell along with Periosteum as Barrier Membrane under Magnification—An Interventional Study
Intrabony defects can be treated by various approaches. Use of GTR along with bone grafts is said to enhance the outcome. The periosteum has been claimed to increase the regeneration. The egg-shell-derived nano hydroxyapatite (EnHA) has shown a scope as alloplastic graft. Thus, the following study was undertaken to combine the periosteal pedicle along with EnHA for the treatment of intrabony defects under magnification to achieve optimal bone regeneration. A total of 21 patients, having intrabony defects with ≥6 mm probing depth (PD) and two or three wall defects as detected on CBCT, satisfying inclusion criteria were enrolled. The sites were randomly allocated as Group A, B and C (n = 7). The following parameters, defect density and defect fill in CBCT (at baseline and 6 months), PPD, RAL, Plaque index (PI), Gingival index (GI) and Gingival Bleeding Index (GBI) were recorded at baseline, 1, 3 and 6 months. p < 0.05 is considered as statistically significant. Bone density and bone fill values were found to be much higher in pedicle with EnHA and EnHA alone group and the values showed statistically significant results. The current clinical research showed that periosteal pedicle along with EnHA and EnHA as stand-alone therapy gave superior results compared to OFD alone, which is an innovative and feasible treatment option.
- 29 January 2023
- Published by MDPI AG in Applied Sciences
- Vol. 13 (3) , 1693
Open AccessRegeneration of Intrabony Defects with Nano Hydroxyapatite Graft, Derived from Eggshell along with Periosteum as Barrier Membrane under Magnification—An Interventional Study
Intrabony defects can be treated by various approaches. Use of GTR along with bone grafts is said to enhance the outcome. The periosteum has been claimed to increase the regeneration. The egg-shell-derived nano hydroxyapatite (EnHA) has shown a scope as alloplastic graft. Thus, the following study was undertaken to combine the periosteal pedicle along with EnHA for the treatment of intrabony defects under magnification to achieve optimal bone regeneration. A total of 21 patients, having intrabony defects with ≥6 mm probing depth (PD) and two or three wall defects as detected on CBCT, satisfying inclusion criteria were enrolled. The sites were randomly allocated as Group A, B and C (n = 7). The following parameters, defect density and defect fill in CBCT (at baseline and 6 months), PPD, RAL, Plaque index (PI), Gingival index (GI) and Gingival Bleeding Index (GBI) were recorded at baseline, 1, 3 and 6 months. p < 0.05 is considered as statistically significant. Bone density and bone fill values were found to be much higher in pedicle with EnHA and EnHA alone group and the values showed statistically significant results. The current clinical research showed that periosteal pedicle along with EnHA and EnHA as stand-alone therapy gave superior results compared to OFD alone, which is an innovative and feasible treatment option.
- Open Access
- 23 January 2023
- Published by MDPI AG in Applied Sciences
- Vol. 13 (3) , 1498
Evaluation of Color Stability of Composite Resin Used to Characterize Acrylic Teeth—An In Vitro Study
The durability and patient acceptability of prosthesis can be gauged by the capacity of visible light curing lab composite resins to maintain color stability through time and use. Consequently, this study’s goal was to assess the color stability of three layering materials, incisal, dentin, and gingiva of SR Nexco lab composite, with exposure to coffee, Coca-Cola, and turmeric solution using a spectrophotometer. A total of 60 specimens (10 × 2 mm) of SR Nexco paste were prepared and were divided into three groups based on the layering material used. Five specimens of each group were immersed in staining solutions, namely, coffee, cola, and turmeric solution. Each group’s last five specimens were submerged in distilled water (control). The incubator that housed the samples was set to 37 °C. The CIE L*a*b* method was used to quantify the color differences (E) of specimens using a spectrophotometer at baseline and after two weeks of immersion. Using ANOVA testing, the average color change for each specimen was examined. Tukey tests were used for post hoc comparisons. The calculated mean color difference (ΔE) for incisal ranges from 3.73 (distilled water) to 28.70 (turmeric). The mean color difference (ΔE) for dentin ranges from 2.66 (distilled water) to 41.19 (turmeric). The mean color difference (ΔE) for gingiva ranges from 1.72 (distilled water) to 23.88 (turmeric). The results are statistically significant. The maximum color difference is noted for dentin specimens, and turmeric stains all three layering materials to a maximum. The color stability of SR Nexco paste layering materials is significantly affected by the discoloring agents used. The comparison of color change between the three layering materials of SR Nexco paste (dentin, incisal, and gingiva) is statistically not significant. Turmeric solution exhibits more discoloration followed by cola and coffee solution.
- 23 January 2023
- Published by MDPI AG in Applied Sciences
- Vol. 13 (3) , 1498
Open AccessEvaluation of Color Stability of Composite Resin Used to Characterize Acrylic Teeth—An In Vitro Study
The durability and patient acceptability of prosthesis can be gauged by the capacity of visible light curing lab composite resins to maintain color stability through time and use. Consequently, this study’s goal was to assess the color stability of three layering materials, incisal, dentin, and gingiva of SR Nexco lab composite, with exposure to coffee, Coca-Cola, and turmeric solution using a spectrophotometer. A total of 60 specimens (10 × 2 mm) of SR Nexco paste were prepared and were divided into three groups based on the layering material used. Five specimens of each group were immersed in staining solutions, namely, coffee, cola, and turmeric solution. Each group’s last five specimens were submerged in distilled water (control). The incubator that housed the samples was set to 37 °C. The CIE L*a*b* method was used to quantify the color differences (E) of specimens using a spectrophotometer at baseline and after two weeks of immersion. Using ANOVA testing, the average color change for each specimen was examined. Tukey tests were used for post hoc comparisons. The calculated mean color difference (ΔE) for incisal ranges from 3.73 (distilled water) to 28.70 (turmeric). The mean color difference (ΔE) for dentin ranges from 2.66 (distilled water) to 41.19 (turmeric). The mean color difference (ΔE) for gingiva ranges from 1.72 (distilled water) to 23.88 (turmeric). The results are statistically significant. The maximum color difference is noted for dentin specimens, and turmeric stains all three layering materials to a maximum. The color stability of SR Nexco paste layering materials is significantly affected by the discoloring agents used. The comparison of color change between the three layering materials of SR Nexco paste (dentin, incisal, and gingiva) is statistically not significant. Turmeric solution exhibits more discoloration followed by cola and coffee solution.