Prerna
Prerna has a total of 24 co-authors. Here are the top co-authors by number of shared publications:
- Joern Ilja Siepmann
Department of Chemical Engineering and Materials Science University of Minnesota Minneapolis Minnesota USA
5 shared publications - Michael Tsapatsis
Institute for NanoBioTechnology & Department of Chemical and Biomolecular Engineering Johns Hopkins University Baltimore Maryland USA
4 shared publications - Arturo J. Hernandez-Maldonado
Department of Chemical Engineering University of Puerto Rico Mayagüez Campus Mayagüez Puerto Rico USA
2 shared publications - Cristian Aristizabal-González
Department of Chemical Engineering University of Puerto Rico Mayagüez Campus Mayagüez Puerto Rico USA
2 shared publications - Dongxia Liu
Department of Chemical and Biomolecular Engineering University of Delaware Newark Delaware USA
2 shared publications - Junyan Zhang
Institute for NanoBioTechnology & Department of Chemical and Biomolecular Engineering Johns Hopkins University Baltimore Maryland USA
2 shared publications
Latest Publications
- 6 August 2026
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 65 (41)
Adsorbate‐Induced Reversible Changes in Zeolite ZEO‐5 Attributed to Its Triple‐Four‐Silicate‐Rings
Extra‐large pore zeolites exhibit structural features distinct from those of classical zeolites, with potential consequences in their use as adsorbents and catalysts. A low‐framework‐density zeolite, ZEO‐5, was synthesized via interchain expansion, forming unprecedented triple four‐ring (t4r) units, creating a fully connected framework with 20‐membered‐ring pores. Here, we report that ZEO‐5 exhibits unique water adsorption behavior. Initially hydrophobic, it undergoes a sharp increase in water uptake within a narrow range of relative pressure, transitioning into a hydrophilic status, with a pronounced desorption hysteresis. Characterization by synchrotron powder x‐ray diffraction, porosimetry, in situ infrared spectroscopy, and solid‐state nuclear magnetic resonance reveals structural degradation via Si─O─Si bond cleavage within the highly strained t4r unit. Remarkably, upon recalcination, the original structure of ZEO‐5, including its t4r units, is fully restored, establishing a reversible adsorption‐induced order–disorder structural transformation. Similar behavior occurs with other polar molecules, including ammonia and alcohols, underscoring the broader implications of this ZEO‐5 feature for adsorptive separations and for pore functionalization. At 423K, ZEO‐5 exhibits high ammonia working capacity between 11 and 1.1 bar adsorption and desorption pressures, respectively, surpassing the corresponding performance of commercial aluminosilicate zeolites. Structure models, consistent with experimental observations, and molecular simulation are used to explain this phenomenon.
- 6 August 2026
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 65 (41)
Adsorbate‐Induced Reversible Changes in Zeolite ZEO‐5 Attributed to Its Triple‐Four‐Silicate‐Rings
Extra‐large pore zeolites exhibit structural features distinct from those of classical zeolites, with potential consequences in their use as adsorbents and catalysts. A low‐framework‐density zeolite, ZEO‐5, was synthesized via interchain expansion, forming unprecedented triple four‐ring (t4r) units, creating a fully connected framework with 20‐membered‐ring pores. Here, we report that ZEO‐5 exhibits unique water adsorption behavior. Initially hydrophobic, it undergoes a sharp increase in water uptake within a narrow range of relative pressure, transitioning into a hydrophilic status, with a pronounced desorption hysteresis. Characterization by synchrotron powder x‐ray diffraction, porosimetry, in situ infrared spectroscopy, and solid‐state nuclear magnetic resonance reveals structural degradation via Si─O─Si bond cleavage within the highly strained t4r unit. Remarkably, upon recalcination, the original structure of ZEO‐5, including its t4r units, is fully restored, establishing a reversible adsorption‐induced order–disorder structural transformation. Similar behavior occurs with other polar molecules, including ammonia and alcohols, underscoring the broader implications of this ZEO‐5 feature for adsorptive separations and for pore functionalization. At 423K, ZEO‐5 exhibits high ammonia working capacity between 11 and 1.1 bar adsorption and desorption pressures, respectively, surpassing the corresponding performance of commercial aluminosilicate zeolites. Structure models, consistent with experimental observations, and molecular simulation are used to explain this phenomenon.
- 6 August 2026
- Published by Wiley in Angewandte Chemie
- Vol. 138 (41)
Adsorbate‐Induced Reversible Changes in Zeolite ZEO‐5 Attributed to Its Triple‐Four‐Silicate‐Rings
Extra‐large pore zeolites exhibit structural features distinct from those of classical zeolites, with potential consequences in their use as adsorbents and catalysts. A low‐framework‐density zeolite, ZEO‐5, was synthesized via interchain expansion, forming unprecedented triple four‐ring (t4r) units, creating a fully connected framework with 20‐membered‐ring pores. Here, we report that ZEO‐5 exhibits unique water adsorption behavior. Initially hydrophobic, it undergoes a sharp increase in water uptake within a narrow range of relative pressure, transitioning into a hydrophilic status, with a pronounced desorption hysteresis. Characterization by synchrotron powder x‐ray diffraction, porosimetry, in situ infrared spectroscopy, and solid‐state nuclear magnetic resonance reveals structural degradation via Si─O─Si bond cleavage within the highly strained t4r unit. Remarkably, upon recalcination, the original structure of ZEO‐5, including its t4r units, is fully restored, establishing a reversible adsorption‐induced order–disorder structural transformation. Similar behavior occurs with other polar molecules, including ammonia and alcohols, underscoring the broader implications of this ZEO‐5 feature for adsorptive separations and for pore functionalization. At 423K, ZEO‐5 exhibits high ammonia working capacity between 11 and 1.1 bar adsorption and desorption pressures, respectively, surpassing the corresponding performance of commercial aluminosilicate zeolites. Structure models, consistent with experimental observations, and molecular simulation are used to explain this phenomenon.
- 6 August 2026
- Published by Wiley in Angewandte Chemie
- Vol. 138 (41)
Adsorbate‐Induced Reversible Changes in Zeolite ZEO‐5 Attributed to Its Triple‐Four‐Silicate‐Rings
Extra‐large pore zeolites exhibit structural features distinct from those of classical zeolites, with potential consequences in their use as adsorbents and catalysts. A low‐framework‐density zeolite, ZEO‐5, was synthesized via interchain expansion, forming unprecedented triple four‐ring (t4r) units, creating a fully connected framework with 20‐membered‐ring pores. Here, we report that ZEO‐5 exhibits unique water adsorption behavior. Initially hydrophobic, it undergoes a sharp increase in water uptake within a narrow range of relative pressure, transitioning into a hydrophilic status, with a pronounced desorption hysteresis. Characterization by synchrotron powder x‐ray diffraction, porosimetry, in situ infrared spectroscopy, and solid‐state nuclear magnetic resonance reveals structural degradation via Si─O─Si bond cleavage within the highly strained t4r unit. Remarkably, upon recalcination, the original structure of ZEO‐5, including its t4r units, is fully restored, establishing a reversible adsorption‐induced order–disorder structural transformation. Similar behavior occurs with other polar molecules, including ammonia and alcohols, underscoring the broader implications of this ZEO‐5 feature for adsorptive separations and for pore functionalization. At 423K, ZEO‐5 exhibits high ammonia working capacity between 11 and 1.1 bar adsorption and desorption pressures, respectively, surpassing the corresponding performance of commercial aluminosilicate zeolites. Structure models, consistent with experimental observations, and molecular simulation are used to explain this phenomenon.
- 9 December 2025
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 129 (51) , 22561-22574
Understanding Differences in Water Adsorption Isotherms: Structural Variations, Force Fields, and Monte Carlo Simulation Approaches
- 9 December 2025
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 129 (51) , 22561-22574
Understanding Differences in Water Adsorption Isotherms: Structural Variations, Force Fields, and Monte Carlo Simulation Approaches
- 30 September 2022
- Published by Wiley in Angewandte Chemie
- Vol. 134 (44)
Simultaneously Enhanced Hydrophilicity and Stability of a Metal‐Organic Framework via Post‐Synthetic Modification for Water Vapor Sorption/Desorption
With increasing demands for high‐performance water sorption materials, metal‐organic frameworks (MOFs) have gained considerable attention due to their high maximum uptake capacities. In many cases, however, high overall capacity is not necessarily accomplishing high working capacity under operating conditions, due to insufficient hydrophilicity and/or water stability. Herein, we present a post‐synthetic modification (PSM) of MOF‐808, with di‐sulfonic acids enhancing simultaneously its hydrophilicity and water stability without sacrificing its uptake capacity of ≈30 mmol g−1. Di‐sulfonic acid PSM enabled a shift of the relative humidity (RH) associated with a sharp step in water vapor sorption from 35–40 % RH in MOF‐808 to below 25 % RH. While MOF‐808 lost uptake capacity and crystallinity over multiple sorption/desorption cycles, the di‐sulfonic acid PSM MOF‐808 retained >80 % of the original capacity. PSM MOF‐808 exhibited good hydrothermal stability up to 60 °C and high swing capacity.
- 30 September 2022
- Published by Wiley in Angewandte Chemie
- Vol. 134 (44)
Simultaneously Enhanced Hydrophilicity and Stability of a Metal‐Organic Framework via Post‐Synthetic Modification for Water Vapor Sorption/Desorption
With increasing demands for high‐performance water sorption materials, metal‐organic frameworks (MOFs) have gained considerable attention due to their high maximum uptake capacities. In many cases, however, high overall capacity is not necessarily accomplishing high working capacity under operating conditions, due to insufficient hydrophilicity and/or water stability. Herein, we present a post‐synthetic modification (PSM) of MOF‐808, with di‐sulfonic acids enhancing simultaneously its hydrophilicity and water stability without sacrificing its uptake capacity of ≈30 mmol g−1. Di‐sulfonic acid PSM enabled a shift of the relative humidity (RH) associated with a sharp step in water vapor sorption from 35–40 % RH in MOF‐808 to below 25 % RH. While MOF‐808 lost uptake capacity and crystallinity over multiple sorption/desorption cycles, the di‐sulfonic acid PSM MOF‐808 retained >80 % of the original capacity. PSM MOF‐808 exhibited good hydrothermal stability up to 60 °C and high swing capacity.
- 30 September 2022
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 61 (44) , e202209034
Simultaneously Enhanced Hydrophilicity and Stability of a Metal‐Organic Framework via Post‐Synthetic Modification for Water Vapor Sorption/Desorption
With increasing demands for high‐performance water sorption materials, metal‐organic frameworks (MOFs) have gained considerable attention due to their high maximum uptake capacities. In many cases, however, high overall capacity is not necessarily accomplishing high working capacity under operating conditions, due to insufficient hydrophilicity and/or water stability. Herein, we present a post‐synthetic modification (PSM) of MOF‐808, with di‐sulfonic acids enhancing simultaneously its hydrophilicity and water stability without sacrificing its uptake capacity of ≈30 mmol g−1. Di‐sulfonic acid PSM enabled a shift of the relative humidity (RH) associated with a sharp step in water vapor sorption from 35–40 % RH in MOF‐808 to below 25 % RH. While MOF‐808 lost uptake capacity and crystallinity over multiple sorption/desorption cycles, the di‐sulfonic acid PSM MOF‐808 retained >80 % of the original capacity. PSM MOF‐808 exhibited good hydrothermal stability up to 60 °C and high swing capacity.
- 30 September 2022
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 61 (44) , e202209034
Simultaneously Enhanced Hydrophilicity and Stability of a Metal‐Organic Framework via Post‐Synthetic Modification for Water Vapor Sorption/Desorption
With increasing demands for high‐performance water sorption materials, metal‐organic frameworks (MOFs) have gained considerable attention due to their high maximum uptake capacities. In many cases, however, high overall capacity is not necessarily accomplishing high working capacity under operating conditions, due to insufficient hydrophilicity and/or water stability. Herein, we present a post‐synthetic modification (PSM) of MOF‐808, with di‐sulfonic acids enhancing simultaneously its hydrophilicity and water stability without sacrificing its uptake capacity of ≈30 mmol g−1. Di‐sulfonic acid PSM enabled a shift of the relative humidity (RH) associated with a sharp step in water vapor sorption from 35–40 % RH in MOF‐808 to below 25 % RH. While MOF‐808 lost uptake capacity and crystallinity over multiple sorption/desorption cycles, the di‐sulfonic acid PSM MOF‐808 retained >80 % of the original capacity. PSM MOF‐808 exhibited good hydrothermal stability up to 60 °C and high swing capacity.