Yufei Wang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Yufei Wang has a total of 72 co-authors. Here are the top co-authors by number of shared publications:
- Wanhua Zheng
Shandong University
21 shared publications Jingxuan Chen
Laboratory of Solid State Optoelectronics Information Technology, Institute of Semiconductors, Chinese Academy of Sciences, Beijing 100083, People’s Republic of China
8 shared publicationsTing Fu
Weifang Academy of Advanced Opto-Electronic Circuits, Weifang, China
8 shared publications- Xuyan Zhou
Key Laboratory of Solid-State Optoelectronics Information Technology, Institute of Semiconductors, Chinese Academy of Sciences, Beijing, China
8 shared publications - Aiyi Qi
Chinese Academy of Sciences
7 shared publications Jianxin Zhang
Weifang Academy of Advanced Opto-Electronic Circuits, Weifang, China
5 shared publications
Latest Publications
- Open Access
Mode Discrimination in Quasi-PT-Symmetric Surface-Emitting DFB Semiconductor Lasers with Separated Gain and Radiating-Grating Sections
Surface-emitting distributed-feedback (SE-DFB) semiconductor lasers based on second-order gratings face a fundamental triple constraint: the spatial co-location of gain, grating feedback, and vertical radiation functions limits single-mode selectivity, surface extraction efficiency, and far-field beam quality simultaneously. We propose a quasi-parity-time (PT)-symmetric SE-DFB laser with separated gain and radiating-grating sections. In this design, the electrically injected gain section and the passive second-order grating section are placed in different regions along the cavity axis, thereby separating electrical injection from surface emission without epitaxial regrowth. Coupled-mode theory and two-dimensional finite-element simulations demonstrate that the resulting longitudinal non-Hermitian gain–loss asymmetry produces spatial-overlap-dependent threshold discrimination, enabling an isolated low-threshold lasing branch that remains separated from competing cavity modes over the investigated pump-parameter range. Under the HR–AR boundary condition, the proposed design achieves a threshold gain margin of , more than six times that of a conventional HR–AR DFB benchmark considered here, together with an upward surface extraction efficiency of 23.4% obtained from 2D FEM simulations. A simplified steady-state rate-equation estimate further suggests that the increased threshold margin can support strong side-mode suppression. The design imposes no regrowth requirement and is fully compatible with standard single-growth InP ridge-waveguide fabrication.Open AccessMode Discrimination in Quasi-PT-Symmetric Surface-Emitting DFB Semiconductor Lasers with Separated Gain and Radiating-Grating Sections
Surface-emitting distributed-feedback (SE-DFB) semiconductor lasers based on second-order gratings face a fundamental triple constraint: the spatial co-location of gain, grating feedback, and vertical radiation functions limits single-mode selectivity, surface extraction efficiency, and far-field beam quality simultaneously. We propose a quasi-parity-time (PT)-symmetric SE-DFB laser with separated gain and radiating-grating sections. In this design, the electrically injected gain section and the passive second-order grating section are placed in different regions along the cavity axis, thereby separating electrical injection from surface emission without epitaxial regrowth. Coupled-mode theory and two-dimensional finite-element simulations demonstrate that the resulting longitudinal non-Hermitian gain–loss asymmetry produces spatial-overlap-dependent threshold discrimination, enabling an isolated low-threshold lasing branch that remains separated from competing cavity modes over the investigated pump-parameter range. Under the HR–AR boundary condition, the proposed design achieves a threshold gain margin of , more than six times that of a conventional HR–AR DFB benchmark considered here, together with an upward surface extraction efficiency of 23.4% obtained from 2D FEM simulations. A simplified steady-state rate-equation estimate further suggests that the increased threshold margin can support strong side-mode suppression. The design imposes no regrowth requirement and is fully compatible with standard single-growth InP ridge-waveguide fabrication. - Open Access
High-Power, Low-Divergence, Single Cross-Sectional-Mode 795 nm Semiconductor Laser Based on Photonic Crystal Epitaxy
The 795 nm wavelength corresponds to the D1 transition of rubidium atoms and is widely used in atomic optical pumping, atomic clocks, magnetometers, and precision spectroscopy. For compact free-space collimation, beam shaping, and efficient fiber coupling, edge-emitting semiconductor lasers with reduced fast-axis (vertical) divergence are highly desirable, yet low-divergence designs at 795 nm remain limited. Here, we propose and demonstrate low-divergence photonic-crystal epitaxy (LD–PC) for 795 nm edge-emitting lasers. By engineering a periodic n-side photonic-crystal stack to place the fundamental vertical mode near the photonic band edge, the vertical mode is expanded while maintaining effective modal discrimination. Narrow-ridge Fabry–Pérot lasers based on GaAsP/AlGaAs single-quantum-well epitaxy were fabricated and characterized. The optimized LD–PC device (3 μm ridge width, 1 mm cavity length) delivers 227 mW at 200 mA with a threshold current of 23 mA, a slope efficiency of 1.28 W/A, and a peak wall-plug efficiency of 55% under continuous-wave operation at 25 °C. The measured far-field divergences (FWHMs) are 7.16° and 18.83° in the lateral and vertical directions, respectively, corresponding to a reduction in the vertical divergence from >40° in the reference structure to <20° with LD–PC. These results validate photonic-crystal epitaxy as an effective route toward compact, high-performance, low-divergence 795 nm semiconductor laser sources for rubidium-based atomic systems.
Open AccessHigh-Power, Low-Divergence, Single Cross-Sectional-Mode 795 nm Semiconductor Laser Based on Photonic Crystal Epitaxy
The 795 nm wavelength corresponds to the D1 transition of rubidium atoms and is widely used in atomic optical pumping, atomic clocks, magnetometers, and precision spectroscopy. For compact free-space collimation, beam shaping, and efficient fiber coupling, edge-emitting semiconductor lasers with reduced fast-axis (vertical) divergence are highly desirable, yet low-divergence designs at 795 nm remain limited. Here, we propose and demonstrate low-divergence photonic-crystal epitaxy (LD–PC) for 795 nm edge-emitting lasers. By engineering a periodic n-side photonic-crystal stack to place the fundamental vertical mode near the photonic band edge, the vertical mode is expanded while maintaining effective modal discrimination. Narrow-ridge Fabry–Pérot lasers based on GaAsP/AlGaAs single-quantum-well epitaxy were fabricated and characterized. The optimized LD–PC device (3 μm ridge width, 1 mm cavity length) delivers 227 mW at 200 mA with a threshold current of 23 mA, a slope efficiency of 1.28 W/A, and a peak wall-plug efficiency of 55% under continuous-wave operation at 25 °C. The measured far-field divergences (FWHMs) are 7.16° and 18.83° in the lateral and vertical directions, respectively, corresponding to a reduction in the vertical divergence from >40° in the reference structure to <20° with LD–PC. These results validate photonic-crystal epitaxy as an effective route toward compact, high-performance, low-divergence 795 nm semiconductor laser sources for rubidium-based atomic systems.
- 24 October 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Technology Letters
- Vol. 38 (4) , 247-250
Quantum Cascade Photonic Crystal Surface-Emitting Laser With Lateral Coupling Cavity at 9.4 μ m
Photonic crystal (PC) is an excellent solution to realize a surface-emitting quantum cascade laser. The size of photonic crystal array has a severe relevance with both cost and heat dissipation. We report quantum cascade photonic crystal surface-emitting lasers (QC-PCSELs) at $9.4~\mu $ m with compact PC dimension, demonstrating a peak output power of 140 mW. The PC structure is fabricated by deep-etching process from the surface. Through introducing an elliptical structure PC and adjusting the axis ratio and filling factor, in-plane symmetry is broken and the Q factors have been tuned, and the output power and single-mode performance have been optimized. And by introducing lateral coupling cavity to compensate the parasitic loss, the threshold current can be reduced. Furthermore, we investigate the influence of PC depth on the performance of laser by a special focused ion beam (FIB) secondary etching. The results show the depth can be precisely optimized to obtain the maximum output power and the corresponding reduced threshold current density and increased slope efficiency.
- 24 October 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Technology Letters
- Vol. 38 (4) , 247-250
Quantum Cascade Photonic Crystal Surface-Emitting Laser With Lateral Coupling Cavity at 9.4 μ m
Photonic crystal (PC) is an excellent solution to realize a surface-emitting quantum cascade laser. The size of photonic crystal array has a severe relevance with both cost and heat dissipation. We report quantum cascade photonic crystal surface-emitting lasers (QC-PCSELs) at $9.4~\mu $ m with compact PC dimension, demonstrating a peak output power of 140 mW. The PC structure is fabricated by deep-etching process from the surface. Through introducing an elliptical structure PC and adjusting the axis ratio and filling factor, in-plane symmetry is broken and the Q factors have been tuned, and the output power and single-mode performance have been optimized. And by introducing lateral coupling cavity to compensate the parasitic loss, the threshold current can be reduced. Furthermore, we investigate the influence of PC depth on the performance of laser by a special focused ion beam (FIB) secondary etching. The results show the depth can be precisely optimized to obtain the maximum output power and the corresponding reduced threshold current density and increased slope efficiency.
- 14 October 2025
- Published by IOP Publishing in Journal of Physics D: Applied Physics
- Vol. 58 (42) , 425101
Local density of electromagnetic states in finite 1D topological gratings
We analyze the local density of electromagnetic states (LDOS) in finite 1D topological gratings to unveil the unique nature of topological edge modes. At the frequency corresponding to the topological edge mode, the LDOS intensity decays exponentially from the topological phase transition interface toward both sides. Our results show that the topological edge state’s LDOS peak exceeds that of a defect mode by over 1.5× and that of a band edge mode by nearly 100×, with a correspondingly narrower FWHM, benefiting from intrinsic topological protection and strong spatial confinement. We investigate how structural symmetry breaking and polarization effects modify the LDOS distribution. In addition, the coupling between topological edge modes of different orders and dipoles with various orientations is analyzed through LDOS calculations. By adjusting the local perturbation strength of the nearest and next-nearest neighboring unit cells at the topological interface, the LDOS intensity at the resonance frequencies of different-order topological edge modes can be modulated, thereby enabling selection of the dominant cavity mode. Consequently, LDOS calculations offer valuable insights for optimizing light–matter interaction and reducing laser thresholds. This work provides practical guidelines for designing topological lasers with improved efficiency and narrow spectral linewidth.
- 14 October 2025
- Published by IOP Publishing in Journal of Physics D: Applied Physics
- Vol. 58 (42) , 425101
Local density of electromagnetic states in finite 1D topological gratings
We analyze the local density of electromagnetic states (LDOS) in finite 1D topological gratings to unveil the unique nature of topological edge modes. At the frequency corresponding to the topological edge mode, the LDOS intensity decays exponentially from the topological phase transition interface toward both sides. Our results show that the topological edge state’s LDOS peak exceeds that of a defect mode by over 1.5× and that of a band edge mode by nearly 100×, with a correspondingly narrower FWHM, benefiting from intrinsic topological protection and strong spatial confinement. We investigate how structural symmetry breaking and polarization effects modify the LDOS distribution. In addition, the coupling between topological edge modes of different orders and dipoles with various orientations is analyzed through LDOS calculations. By adjusting the local perturbation strength of the nearest and next-nearest neighboring unit cells at the topological interface, the LDOS intensity at the resonance frequencies of different-order topological edge modes can be modulated, thereby enabling selection of the dominant cavity mode. Consequently, LDOS calculations offer valuable insights for optimizing light–matter interaction and reducing laser thresholds. This work provides practical guidelines for designing topological lasers with improved efficiency and narrow spectral linewidth.
- 13 October 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Technology Letters
- Vol. 38 (2) , 89-92
High-Brightness 980 nm Tapered Step-Ridge-Waveguide Photonic Crystal Laser Diode
High-brightness diode lasers, emitting around 9xx nm with watt-class powers, are the key component in numerous applications. we present approaches to increase the power level and the brightness. A 980 nm tapered step-ridge-waveguide photonic crystal laser diode (TSRW-PCLD) was designed to achieve separate confinement of carriers and optical fields. This design restricts lateral carrier diffusion to maximize overlap with the fundamental mode. Through meticulous optimization of the injection region width and optical waveguide dimensions, competition from higher-order modes is suppressed. A 4-mm-cavity high-brightness semiconductor laser is demonstrated with an output power of 2.92 W at an injection current of 3.7 A, and a brightness of 130 MW$\cdot $ cm${}^{-2}\cdot $ sr−1 (lateral brightness of 5.16 W$\cdot $ mm${}^{-1}\cdot $ mrad−1) at the second moment level.- 13 October 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Technology Letters
- Vol. 38 (2) , 89-92
High-Brightness 980 nm Tapered Step-Ridge-Waveguide Photonic Crystal Laser Diode
High-brightness diode lasers, emitting around 9xx nm with watt-class powers, are the key component in numerous applications. we present approaches to increase the power level and the brightness. A 980 nm tapered step-ridge-waveguide photonic crystal laser diode (TSRW-PCLD) was designed to achieve separate confinement of carriers and optical fields. This design restricts lateral carrier diffusion to maximize overlap with the fundamental mode. Through meticulous optimization of the injection region width and optical waveguide dimensions, competition from higher-order modes is suppressed. A 4-mm-cavity high-brightness semiconductor laser is demonstrated with an output power of 2.92 W at an injection current of 3.7 A, and a brightness of 130 MW$\cdot $ cm${}^{-2}\cdot $ sr−1 (lateral brightness of 5.16 W$\cdot $ mm${}^{-1}\cdot $ mrad−1) at the second moment level.- 24 September 2025
- Published by Optica Publishing Group in Optics Express
- Vol. 33 (20) , 42081-42091
High-brightness supersymmetric transversally coupled stepped-tapered laser diode
We present a novel supersymmetric transversally coupled stepped-tapered laser diode (STC-STLD) configuration to simultaneously enhance both output power and brightness in semiconductor lasers. This configuration enables the separate confinement of carriers and optical fields. Higher-order modes expand into the passive supersymmetric transversally coupling structure, which effectively suppresses transverse higher-order mode competition. The integrated coupling structure permits wider main waveguides to increase the fundamental mode size laterally, thereby increasing output power. The stepped-taper design limits the injected carriers in a lateral direction and increases the spatial overlap between the resulting gain distribution with the supported lateral modes optical field distribution. Experimental realization, based on a 980 nm ridge waveguide structure with a cavity length of 4 mm, demonstrates exceptional performance under continuous wave (CW) operation: achieving 4.6 W output power at a 4.4 A drive current with brightness metrics (at second-moment level, ISO 11146-compliant) of 6.2 W·mm-1·mrad-1 (lateral brightness) and 149.6 MW·cm-2·sr-1.
- 24 September 2025
- Published by Optica Publishing Group in Optics Express
- Vol. 33 (20) , 42081-42091
High-brightness supersymmetric transversally coupled stepped-tapered laser diode
We present a novel supersymmetric transversally coupled stepped-tapered laser diode (STC-STLD) configuration to simultaneously enhance both output power and brightness in semiconductor lasers. This configuration enables the separate confinement of carriers and optical fields. Higher-order modes expand into the passive supersymmetric transversally coupling structure, which effectively suppresses transverse higher-order mode competition. The integrated coupling structure permits wider main waveguides to increase the fundamental mode size laterally, thereby increasing output power. The stepped-taper design limits the injected carriers in a lateral direction and increases the spatial overlap between the resulting gain distribution with the supported lateral modes optical field distribution. Experimental realization, based on a 980 nm ridge waveguide structure with a cavity length of 4 mm, demonstrates exceptional performance under continuous wave (CW) operation: achieving 4.6 W output power at a 4.4 A drive current with brightness metrics (at second-moment level, ISO 11146-compliant) of 6.2 W·mm-1·mrad-1 (lateral brightness) and 149.6 MW·cm-2·sr-1.
- 31 October 2024
- Published by Optica Publishing Group in Photonics Research
- Vol. 12 (11) , 2539-2548
Dynamic phase transition region in electrically injected PT-symmetric lasers
Research on parity-time (PT) symmetry and exceptional points in non-Hermitian laser systems has been extensively conducted. However, in practical electrically injected PT-symmetric lasers, the frequency detuning and linewidth enhancement factor of the laser can influence the symmetry breaking of the system in another dimension. We find that the previous exceptional point now transforms into a dynamic phase transition region, where the states are temporally unstable, indicating the occurrence of multimode oscillation. The relative phase and field amplitude ratio in this region also exhibit many novel phenomena indicating its instability. This region can be manipulated by adjusting the coupling strength between adjacent waveguides and the pumping intensity in the loss waveguide. Experimentally, we characterize the near-field, far-field, and spectrum of several structures, and the results validate our theoretical model. This work elucidates the dynamic process and phase transition process of electrically injected PT-symmetric lasers, providing support for the practical application of PT-symmetric lasers.
- 31 October 2024
- Published by Optica Publishing Group in Photonics Research
- Vol. 12 (11) , 2539-2548
Dynamic phase transition region in electrically injected PT-symmetric lasers
Research on parity-time (PT) symmetry and exceptional points in non-Hermitian laser systems has been extensively conducted. However, in practical electrically injected PT-symmetric lasers, the frequency detuning and linewidth enhancement factor of the laser can influence the symmetry breaking of the system in another dimension. We find that the previous exceptional point now transforms into a dynamic phase transition region, where the states are temporally unstable, indicating the occurrence of multimode oscillation. The relative phase and field amplitude ratio in this region also exhibit many novel phenomena indicating its instability. This region can be manipulated by adjusting the coupling strength between adjacent waveguides and the pumping intensity in the loss waveguide. Experimentally, we characterize the near-field, far-field, and spectrum of several structures, and the results validate our theoretical model. This work elucidates the dynamic process and phase transition process of electrically injected PT-symmetric lasers, providing support for the practical application of PT-symmetric lasers.
- 20 September 2024
- Published by Optica Publishing Group in Optics Express
- Vol. 32 (20) , 36010-36020
High-power semiconductor laser with a narrow linewidth based on transverse photonic crystal
Broad-area lasers (BA) are practical for producing high output power. However, under a high current operation, high-order modes are easily excited, resulting in the broadened linewidth. Here, based on mode engineering of double-side transverse photonic crystals (TPCs) combined with a longitudinal high-order surface grating, a narrow-linewidth electrically-pumped broad-area laser with high power emission only using I-line lithography is demonstrated. By matching the high-order modes of the wide main waveguide with TPC bands, the effective volume of the high-order modes is expanded, while the fundamental mode remains unchanged. Then, single-lateral mode operation is achieved by selective pumping only for the main waveguide due to the significant distinction in modal gain between the fundamental mode and the high-order modes. In addition, a 27-order grating is constructed above the main waveguide to keep the laser operating in single-longitudinal mode. In the experiment, the device shows an output power of 115 mW, a lasing wavelength of 1552.94 nm with a side-mode suppression ratio (SMSR) of 59.26 dB, a narrow linewidth of 443 kHz, and a relative intensity noise (RIN) < -135 dB/Hz at 600 mA, thus has the potential to meet the needs in fields such as coherent optical communication and LiDAR.
- 20 September 2024
- Published by Optica Publishing Group in Optics Express
- Vol. 32 (20) , 36010-36020
High-power semiconductor laser with a narrow linewidth based on transverse photonic crystal
Broad-area lasers (BA) are practical for producing high output power. However, under a high current operation, high-order modes are easily excited, resulting in the broadened linewidth. Here, based on mode engineering of double-side transverse photonic crystals (TPCs) combined with a longitudinal high-order surface grating, a narrow-linewidth electrically-pumped broad-area laser with high power emission only using I-line lithography is demonstrated. By matching the high-order modes of the wide main waveguide with TPC bands, the effective volume of the high-order modes is expanded, while the fundamental mode remains unchanged. Then, single-lateral mode operation is achieved by selective pumping only for the main waveguide due to the significant distinction in modal gain between the fundamental mode and the high-order modes. In addition, a 27-order grating is constructed above the main waveguide to keep the laser operating in single-longitudinal mode. In the experiment, the device shows an output power of 115 mW, a lasing wavelength of 1552.94 nm with a side-mode suppression ratio (SMSR) of 59.26 dB, a narrow linewidth of 443 kHz, and a relative intensity noise (RIN) < -135 dB/Hz at 600 mA, thus has the potential to meet the needs in fields such as coherent optical communication and LiDAR.
- 27 May 2024
- Published by Optica Publishing Group in Optics Letters
- Vol. 49 (11) , 3078-3081
Loss-tailoring single-mode high-power supersymmetric lasers
Diode lasers with high beam quality and high power have many promising applications. However, high beam quality is always in conflict with high power. In this Letter, we theoretically and experimentally confirm the mode instability property of supersymmetric structures at higher operating currents. Meanwhile, we propose a loss-tailoring diode laser based on a supersymmetric structure, which enables the higher-order lateral modes to obtain higher losses, raises the excitation threshold of the higher-order lateral modes, and achieves a stable fundamental-lateral-mode output at higher current operation. The device obtained a quasi-single-lobe lateral far-field distribution with the full width at half maximum (FWHM) of 7.58° at 350 mA under room temperature, which is a 65% reduction compared to the traditional Fabry–Perot (FP) diode lasers. Moreover, the M2 of 2.181@350 mA has an improvement of about 37% over traditional FP and supersymmetric structure lasers.
- 27 May 2024
- Published by Optica Publishing Group in Optics Letters
- Vol. 49 (11) , 3078-3081
Loss-tailoring single-mode high-power supersymmetric lasers
Diode lasers with high beam quality and high power have many promising applications. However, high beam quality is always in conflict with high power. In this Letter, we theoretically and experimentally confirm the mode instability property of supersymmetric structures at higher operating currents. Meanwhile, we propose a loss-tailoring diode laser based on a supersymmetric structure, which enables the higher-order lateral modes to obtain higher losses, raises the excitation threshold of the higher-order lateral modes, and achieves a stable fundamental-lateral-mode output at higher current operation. The device obtained a quasi-single-lobe lateral far-field distribution with the full width at half maximum (FWHM) of 7.58° at 350 mA under room temperature, which is a 65% reduction compared to the traditional Fabry–Perot (FP) diode lasers. Moreover, the M2 of 2.181@350 mA has an improvement of about 37% over traditional FP and supersymmetric structure lasers.
- 23 June 2023
- Published by Optica Publishing Group in Journal of the Optical Society of America B
- Vol. 40 (7) , 1786-1792
Improving beam quality of tapered laser diodes by integrated metalens
High-power and high-beam-quality laser sources are required in numerous applications. Here, we theoretically investigate a tapered laser diode with integrated metalens, which can improve the lateral beam quality. By carefully designing the slot length and width at different lateral positions behind the front facet, the mode mismatch between the ridged cavity and the tapered cavity is overcome while ensuring high transmittance (>96%). The beam quality is greatly improved, and the lateral far-field divergence is reduced. The simulation results show that the lateral far-field divergence (second-moment level) decreases from 7.2° to 5.9°, and the M2 (second-moment level) decreases from 2.3 to 1.2. The proposed structure shows a good thermal stability in the simulation.
- 23 June 2023
- Published by Optica Publishing Group in Journal of the Optical Society of America B
- Vol. 40 (7) , 1786-1792
Improving beam quality of tapered laser diodes by integrated metalens
High-power and high-beam-quality laser sources are required in numerous applications. Here, we theoretically investigate a tapered laser diode with integrated metalens, which can improve the lateral beam quality. By carefully designing the slot length and width at different lateral positions behind the front facet, the mode mismatch between the ridged cavity and the tapered cavity is overcome while ensuring high transmittance (>96%). The beam quality is greatly improved, and the lateral far-field divergence is reduced. The simulation results show that the lateral far-field divergence (second-moment level) decreases from 7.2° to 5.9°, and the M2 (second-moment level) decreases from 2.3 to 1.2. The proposed structure shows a good thermal stability in the simulation.