JCJacopo Cele

Jacopo Cele

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Jacopo Cele has a total of 15 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Interfacial overpotential control enables fast charging of all-solid-state thin-film lithium-metal batteries

    by Maude Bert, Lara Casiez, Jean-Philippe Colonna, Sami Oukassi, Sylvain Franger, Jacopo Celè

  • Thin film batteries for integrated high energy density storage

    by Jacopo Celè

    Batteries films minces pour systèmes intégrés à haute densité d'énergie: Parmi les technologies de rupture, l'Internet des objets (IoT) est la plus populaire. Le concept est né en 1999, et aujourd'hui, c'est toujours un sujet qui mérite d'être discuté.La vision derrière le mot IoT est un environnement hyper-connecté où chaque pouce de notre monde est peuplé d'innombrables appareils, plus petits qu'une pièce de monnaie : une brume de gouttelettes intelligentes, conçues pour capturer même la plus petite donnée disponible.Alors que les progrès de la fabrication de semi-conducteurs ont permis de compresser un micro-ordinateur et une station météorologique dans une puce en silicium d'un millimètre carré, l'empreinte d'un dispositif de stockage d'énergie est bloquée dans les années 1990.La nouvelle génération de batteries à couches minces entièrement solides vise à fournir le dernier bloc fonctionnel à la mise en œuvre de l'IoT. L'élément central pour atteindre la densité d'énergie requise et réduire la taille de l'unité de stockage est l'électrolyte à l'état solide. Grâce à sa stabilité mécanique, il est possible de minimiser l'espacement entre anode et cathode, sans risque de croissance de dendrites et de courts-circuits associés. Néanmoins, la technologie actuelle est limitée par une très mauvaise cyclabilité et la densité de puissance est loin d'être optimale.Dans le présent travail de thèse, nous avons étudié une micro-batterie à l'état solide à couche mince basée sur une cathode LiCoO2 et un électrolyte solide LiPON dans une configuration sans anode. Le dispositif est réalisé dans une empreinte de 0,5 mm2, avec une épaisseur active inférieure à 50 µm.Le manuscrit s'ouvre sur une revue bibliographique des batteries tout solide du point de vue de l'appareil, de la fabrication et des matériaux.Dans le deuxième chapitre, le dispositif est décrit et la caractérisation physico-chimique des différentes couches est rapportée.Le troisième et principal chapitre traite de l'étude de la perte de capacité intrinsèque des cathodes LiCoO2 en configuration couche mince.Afin de comprendre la nature physique de cette perte réversible, un modèle physique 1D continu basé sur l'équation de dérive-diffusion et l'équation de Buttler-Volmer a été réalisé.Le modèle a été résolu au moyen de COMSOL Multiphysics et la perte de capacité a été attribuée à la baisse de la diffusivité du lithium à l'interface cathodique pour un faible état de charge (SOC).La dépendance de la perte de capacité au courant de décharge a également été extraite, montrant la possibilité de récupérer la capacité théorique à une densité de courant extrêmement faible (<10µAcm-2).Le modèle a été comparé aux données expérimentales obtenues pour différentes épaisseurs de cathode (5, 10, 20, 30µm LiCoO2). Un bon accord tant du point de vue qualitatif que quantitatif a été obtenu à toutes les épaisseurs de cathode pour les courbes de charge et de décharge à toutes les densités de courant considérées (10µAcm-2-10mAcm-2).Ensuite, dans le quatrième chapitre, le modèle est vérifié au moyen de 2D dans la diffraction des rayons X synchrotron operando. Le profil de lithium à l'intérieur de l'appareil à différents moments est extrait et comparé à la simulation physique 1D. Encore une fois, un très bon accord est trouvé entre la simulation et les données expérimentales.Le cinquième et dernier chapitre de la thèse porte sur la cyclabilité du dispositif. En particulier, les protocoles de charge et de décharge sont analysés au moyen d'une modélisation statistique afin de corréler les paramètres de cyclage et la durée de vie. Le potentiel de charge et le SOC maximal ont montré l'impact maximal sur le nombre de cycles disponibles. Dans la conclusion et la perspective, une solution au niveau de la conception et une solution au niveau de l'appareil sont proposées pour atténuer la perte de capacité du premier cycle à haute densité de courant avec un gain maximum attendu de + 50 % sur la capacité totale.

  • Open Access

    Author Correction: Operando microimaging of crystal structure and orientation in all components of all-solid-state-batteries

    by Quentin Jacquet, Jacopo Cele, Lara Casiez, Samuel Tardif, Asma Medjahed, Stephanie Pouget, Manfred Burghammer, Sandrine Lyonnard, Sami Oukassi

  • Open Access

    Operando microimaging of crystal structure and orientation in all components of all-solid-state-batteries

    by Quentin Jacquet, Jacopo Cele, Lara Casiez, Samuel Tardif, Asma Medjahed, Stephanie Pouget, Manfred Burghammer, Sandrine Lyonnard, Sami Oukassi

    Solid-state batteries can outperform conventional lithium-ion batteries in terms of energy density and safety, yet their widespread commercialisation remains hindered by challenges in ionic conductivity, interfacial resistance, and manufacturing. A comprehensive understanding of interactions between the electrodes, the electrolyte, and the packaging during battery operation is crucial. Still, it remains overlooked due to the lack of characterisation methods to measure these components simultaneously. Here, we perform a holistic investigation of a compact all-solid-state battery using operando synchrotron 2D X-ray micro-diffraction imaging. We image in real time and simultaneously the lattice parameters and crystal orientation of the dense LiCoO2 positive electrode material, the Ti current collector and the electrodeposited Li metal at the negative electrode. We reveal that the reaction mechanism of LiCoO2 depends on the crystal orientation, and that, in dense electrodes as opposed to porous ones, the delithiation is limited by the formation of a Li-rich insulating interface. Li metal is found to form large crystals whose orientation and number change during plating/stripping: from a heteroepitaxial growth on the Ti current collector at the beginning of charge to a random orientation distribution after 3 µm of Li is plated. These results demonstrate the power of X-ray diffraction imaging to link reaction mechanism and grain orientation in multiple battery components during non-equilibrium processes.


  • Open Access

    Operando imaging of crystal structure and orientation in all components of all-solid-state-batteries

    by Quentin Jacquet, Jacopo Cele, Lara Casiez, Samuel Tardif, Asma Medjaheh, Stephanie Pouget, Manfred Burghammer, Sandrine Lyonnard, Sami Oukassi

    A comprehensive understanding of interactions between cathode, electrolyte, anode, and packaging during battery operation is crucial for advancing performances but remains overlooked due to the lack of characterisation technics capable of measuring these components simultaneously. We perform a holistic investigation of a compact all-solid-state-battery using operando synchrotron X-ray micro-diffraction imaging. We image in real time and simultaneously the lattice parameter and crystal orientation of the dense LiCoO2 cathode, the Ti current collector and the electrodeposited Li metal anode. We reveal that reaction mechanism of LiCoO2 depends on the crystal orientation, and that, in dense electrodes as opposed to porous ones, the delithiation is limited by the formation of a Li-rich insulating interface. Li metal crystal orientation is found to be influenced initially by the Ti texture and to change within minutes during plating and stripping. These results demonstrate the power of X-ray imaging to link reaction mechanism and grain orientation during non-equilibrium processes.

  • Open Access

    Minimal Architecture Lithium Batteries: Toward High Energy Density Storage Solutions

    by Jacopo Celè, Sylvain Franger, Yann Lamy, Sami Oukassi

    The coupling of thick and dense cathodes with anode‐free lithium metal configuration is a promising path to enable the next generation of high energy density solid‐state batteries. In this work, LiCoO2 (30 µm)/LiPON/Ti is considered as a model system to study the correlation between fundamental electrode properties and cell electrochemical performance, and a physical model is proposed to understand the governing phenomena. The first cycle loss is demonstrated to be constant and independent of both cathode thickness and anode configuration, and only ascribed to the diffusion coefficient's abrupt fall at high lithium contents. Subsequent cycles achieve close to 100% coulombic efficiency. The examination of the effect of cathode thickness demonstrate a nearly linear correlation with areal specific capacity for sub‐100 µm LiCoO2 and 0.1 mA cm−2 current density. These findings bring new insights to better understand the energy density limiting factors and to suggest potential optimization approaches.