Peng Du
Peng Du has a total of 24 co-authors. Here are the top co-authors by number of shared publications:
Chang Qiang
Haikou college of economics, Haikou, Hainan, 571127, China
3 shared publicationsLiu Xiaoling
Haikou college of economics, Haikou, Hainan, 571127, China
3 shared publications- Xiaoling Liu
Yaha School of Design & Engineering, Haikou University of Economics, Haikou 571127, China
3 shared publications - Chen-Xi Feng
School of Civil Engineering, Nanyang Institute of Technology, Nanyang 473004, China
2 shared publications Fan Jingliang
Ningbo Yitong Construction Co. Ltd., Ningbo, Zhejiang, 315800, China
2 shared publicationsFu Lianhong
Ningbo Yitong Construction Co. Ltd., Ningbo, Zhejiang, 315800, China
2 shared publications
Latest Publications
- Open Access
Influence and Bearing Mechanisms of Thorn Shape on Compressive Characteristics of Thorn Piles
A new type of thorn pile is proposed to address the poor bearing capacity of the foundation. The design of five thorn piles is presented, and the numerical simulation of pile–soil interaction under a uniform silt foundation is performed using ABAQUS software. The influence of thorn shape on the compressive bearing capacity of thorn piles is elucidated, and the mechanism of thorn structure on the soil around piles is analyzed. The results showed that the thorn pile can significantly increase pile shaft resistance and reduce pile top settlement compared with the smooth pile. The ultimate bearing capacity of the 5# pile is 1.6 times higher than that of the smooth pile, while the pile top settlement is reduced by 82.9%. The addition of a thorn structure effectively changes the mechanical characteristics of pile shaft resistance softening. Due to the unique characteristic of the divergent conical surface, the truncated conical thorns exert a powerful radial pressure on the surrounding soil under load, thereby increasing the effective stress of the soil around the pile, expanding the influence range of the soil around the pile, and fully mobilizing the shear resistance of the soil, thus improving the bearing capacity of the foundation pile. The optimal shape of the taper thorn is a cone under the same conditions of length and volume. The research results can provide a theoretical foundation for the design and construction of the thorn pile.
Open AccessInfluence and Bearing Mechanisms of Thorn Shape on Compressive Characteristics of Thorn Piles
A new type of thorn pile is proposed to address the poor bearing capacity of the foundation. The design of five thorn piles is presented, and the numerical simulation of pile–soil interaction under a uniform silt foundation is performed using ABAQUS software. The influence of thorn shape on the compressive bearing capacity of thorn piles is elucidated, and the mechanism of thorn structure on the soil around piles is analyzed. The results showed that the thorn pile can significantly increase pile shaft resistance and reduce pile top settlement compared with the smooth pile. The ultimate bearing capacity of the 5# pile is 1.6 times higher than that of the smooth pile, while the pile top settlement is reduced by 82.9%. The addition of a thorn structure effectively changes the mechanical characteristics of pile shaft resistance softening. Due to the unique characteristic of the divergent conical surface, the truncated conical thorns exert a powerful radial pressure on the surrounding soil under load, thereby increasing the effective stress of the soil around the pile, expanding the influence range of the soil around the pile, and fully mobilizing the shear resistance of the soil, thus improving the bearing capacity of the foundation pile. The optimal shape of the taper thorn is a cone under the same conditions of length and volume. The research results can provide a theoretical foundation for the design and construction of the thorn pile.
- Open Access
- 1 January 2024
- Published by European Alliance for Innovation n.o.
Exploration of Structural Design and Construction Methods of Pneumatic Thorn Piles
In order to solve the bearing problem of poor foundation, thorn piles were proposed, however, the construction of precast thorn piles is still in the blank stage in the project. In this paper, the research on the engineering realization method of precast thorn piles is carried out. Inspired by telescopic rod, the method of prefabricated pile body and pneumatic pressure pushing into thorns is adopted, which effectively solves the key technological problems of pile thorn stabilization at the piling formation stage, the overall air tightness of piles, and pile thorn rebound, and finally a sleeve-type thorn piles is designed. The research results can provide a theoretical basis for the research and development of precast thorn pile molding equipment, and lay the foundation for the subsequent engineering application of precast thorn piles.
- 1 January 2024
- Published by European Alliance for Innovation n.o.
Open AccessExploration of Structural Design and Construction Methods of Pneumatic Thorn Piles
In order to solve the bearing problem of poor foundation, thorn piles were proposed, however, the construction of precast thorn piles is still in the blank stage in the project. In this paper, the research on the engineering realization method of precast thorn piles is carried out. Inspired by telescopic rod, the method of prefabricated pile body and pneumatic pressure pushing into thorns is adopted, which effectively solves the key technological problems of pile thorn stabilization at the piling formation stage, the overall air tightness of piles, and pile thorn rebound, and finally a sleeve-type thorn piles is designed. The research results can provide a theoretical basis for the research and development of precast thorn pile molding equipment, and lay the foundation for the subsequent engineering application of precast thorn piles.
- Open Access
- 4 July 2023
- Published by Atlantis Press SARL
- p. 780-784
Teaching Reform and Practice of Soil Mechanics and Foundation Course Based on “Application + Innovation” Ability Cultivation Mode
- 4 July 2023
- Published by Atlantis Press SARL
- p. 780-784
Open AccessTeaching Reform and Practice of Soil Mechanics and Foundation Course Based on “Application + Innovation” Ability Cultivation Mode
- Open Access
- 25 April 2023
- Published by Wiley in Advances in Civil Engineering
- Vol. 2023, 1-10
Mechanical Property of Lateral Piles for Pile Composite Foundation Loaded by Model Test
Under vertical load, the composite foundation may be damaged due to insufficient lateral restraint capacity. If the lateral restraint pile is added to the edge of the composite foundation, the lateral stability can be effectively enhanced. This new reinforcement scheme is called a combined composite foundation. For the combined composite foundation, the lateral restraint piles will bear a certain force when the composite foundation is loaded, and the force may cause the piles horizontal displacement, instability, or even failure. After preload on the composite foundation, the mechanical behavior of lateral restraint piles will be more sophisticated. To study the mechanical behavior of lateral restraint piles under such condition, a laboratory model test was conducted. The results are suggested as follows: Axial force distribution curves tend to be S shape with two peak values at the upper and lower parts, respectively. The negative axial force is distributed at the upper part, and the positive axial force is distributed at the lower part. The bending moment and lateral soil pressure distribution of piles appear with the regularity of increase-decrease along the depth. Such a phenomenon is associated with the expansion of a potential slip surface. In accordance with the relative location of the potential slide surface and the piles, the lateral restraint piles can fall into three sections. Different sections get different stresses. The reinforcement scopes have an impact on the stress of different lateral restraint piles. With the increase of the reinforcement scope, the axial force, soil pressure, and bending moment show the regularity of increase. The values of axial force, the lateral soil pressure, and the bending moment increase with load growth and become stable when the load is larger than 60kN. This is associated with the piles in the composite foundation, which verifies the reinforcement effect to prevent the soil slide and the foundation deformation.
- 25 April 2023
- Published by Wiley in Advances in Civil Engineering
- Vol. 2023, 1-10
Open AccessMechanical Property of Lateral Piles for Pile Composite Foundation Loaded by Model Test
Under vertical load, the composite foundation may be damaged due to insufficient lateral restraint capacity. If the lateral restraint pile is added to the edge of the composite foundation, the lateral stability can be effectively enhanced. This new reinforcement scheme is called a combined composite foundation. For the combined composite foundation, the lateral restraint piles will bear a certain force when the composite foundation is loaded, and the force may cause the piles horizontal displacement, instability, or even failure. After preload on the composite foundation, the mechanical behavior of lateral restraint piles will be more sophisticated. To study the mechanical behavior of lateral restraint piles under such condition, a laboratory model test was conducted. The results are suggested as follows: Axial force distribution curves tend to be S shape with two peak values at the upper and lower parts, respectively. The negative axial force is distributed at the upper part, and the positive axial force is distributed at the lower part. The bending moment and lateral soil pressure distribution of piles appear with the regularity of increase-decrease along the depth. Such a phenomenon is associated with the expansion of a potential slip surface. In accordance with the relative location of the potential slide surface and the piles, the lateral restraint piles can fall into three sections. Different sections get different stresses. The reinforcement scopes have an impact on the stress of different lateral restraint piles. With the increase of the reinforcement scope, the axial force, soil pressure, and bending moment show the regularity of increase. The values of axial force, the lateral soil pressure, and the bending moment increase with load growth and become stable when the load is larger than 60kN. This is associated with the piles in the composite foundation, which verifies the reinforcement effect to prevent the soil slide and the foundation deformation.
- Open Access
- 24 January 2023
- Published by Elsevier in KSCE Journal of Civil Engineering
- Vol. 27 (3) , 955-965
Model Test Study on the Load-bearing Behaviour of Multi-tooth Piles under Different Bearing Layers
- 24 January 2023
- Published by Elsevier in KSCE Journal of Civil Engineering
- Vol. 27 (3) , 955-965
Open AccessModel Test Study on the Load-bearing Behaviour of Multi-tooth Piles under Different Bearing Layers
- Open Access
- 1 February 2019
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 1168 (3) , 032095
Numerical simulation of soil-structure interface mechanical behavior
Direct shear test is an effective method for studying the contact problem between soil and structure. Based on the numerical simulation method of finite element, three-dimensional numerical simulation of this test is carried out. By analyzing the shear stress and shear deformation under different normal stress states, the shear strength of contact surface and the deformation characteristics are obtained. The results show that the numerical simulation method of finite element can simulate the soil-structure interaction well.
- 1 February 2019
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 1168 (3) , 032095
Open AccessNumerical simulation of soil-structure interface mechanical behavior
Direct shear test is an effective method for studying the contact problem between soil and structure. Based on the numerical simulation method of finite element, three-dimensional numerical simulation of this test is carried out. By analyzing the shear stress and shear deformation under different normal stress states, the shear strength of contact surface and the deformation characteristics are obtained. The results show that the numerical simulation method of finite element can simulate the soil-structure interaction well.
- Open Access
- 6 November 2018
- Published by IOP Publishing in IOP Conference Series: Earth and Environmental Science
- Vol. 189 (6) , 062072
Discussion on Teaching Methods of PKPM Course
With the application of PKPM in the construction industry, aiming at the current lack of teaching status, this paper analyzes some problems in the teaching of PKPM in building structure, and carries out the teaching research on the teaching content, teaching methods, teaching mode and assessment methods.
- 6 November 2018
- Published by IOP Publishing in IOP Conference Series: Earth and Environmental Science
- Vol. 189 (6) , 062072
Open AccessDiscussion on Teaching Methods of PKPM Course
With the application of PKPM in the construction industry, aiming at the current lack of teaching status, this paper analyzes some problems in the teaching of PKPM in building structure, and carries out the teaching research on the teaching content, teaching methods, teaching mode and assessment methods.
- Open Access
- 6 November 2018
- Published by IOP Publishing in IOP Conference Series: Earth and Environmental Science
- Vol. 189 (2) , 022076
Review of Research on Elevation Positioning of Concrete Filling Surface of Bored Piles
The main research contents and methods of concrete perfusion elevation of bored piles at home and abroad are summarized. The shortcomings in the study of concrete pouring height of bored piles are expounded, and some views are put forward on future research.
- 6 November 2018
- Published by IOP Publishing in IOP Conference Series: Earth and Environmental Science
- Vol. 189 (2) , 022076
Open AccessReview of Research on Elevation Positioning of Concrete Filling Surface of Bored Piles
The main research contents and methods of concrete perfusion elevation of bored piles at home and abroad are summarized. The shortcomings in the study of concrete pouring height of bored piles are expounded, and some views are put forward on future research.
- Open Access
- 18 December 2017
- Published by IOP Publishing in IOP Conference Series: Earth and Environmental Science
- Vol. 100 (1) , 012007
Discussion of the Method to Determine the Ultimate Bearing Capacity of Soil Foundation
Combining literature examples, this paper has carried out Contrastive analysis of the theoretical formula method and finite element method about the ultimate bearing capacity of foundation, To verify rationality and superiority of the incremental load method in finite element ABAQUS in solving the bearing capacity of foundation soil. The study can provide certain reference for practical engineering calculation and analysis of foundation bearing capacity.
- 18 December 2017
- Published by IOP Publishing in IOP Conference Series: Earth and Environmental Science
- Vol. 100 (1) , 012007
Open AccessDiscussion of the Method to Determine the Ultimate Bearing Capacity of Soil Foundation
Combining literature examples, this paper has carried out Contrastive analysis of the theoretical formula method and finite element method about the ultimate bearing capacity of foundation, To verify rationality and superiority of the incremental load method in finite element ABAQUS in solving the bearing capacity of foundation soil. The study can provide certain reference for practical engineering calculation and analysis of foundation bearing capacity.