AFAlberto Flores-Perez

Alberto Flores-Perez

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Alberto Flores-Perez has a total of 120 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Sustainable Bacterial Cellulose Production from Avocado Seed Waste Using a Green Biorefinery Approach

    by Gabriela Barraza-Jáuregui, Yolanda Luciana Abanto Sánchez, Angie Rojas, José Carlos Alcántara, Daniel Antonio Medina Bocanegra, Hernán Alvarado-Quintana, Alberto Flores-Pérez, Fernando Javier Hurtado Butrón, Carlos Sopán-Benaute, María Guadalupe Morán-Aguilar, et al.

    In this study, avocado seed (AS) waste was used as a feedstock for bacterial cellulose (BC) production. Global avocado consumption continues to rise due to its recognised health benefits, resulting in substantial amounts of waste generated by the avocado processing industry. This work proposes the efficient utilisation of avocado seed residues—rich in fermentable sugars—to enhance the economic viability of BC production while supporting responsible agro-industrial waste management. Hydrolysed avocado seeds were incorporated into a modified Hestrin–Schramm (MHS) medium for BC production using Komagataeibacter xylinus as the bacterial strain. The BC membranes obtained from the modified medium (BC-MHS) exhibited higher production (1.93 g/L) and productivity (0.19 g/L·day) compared with those produced in the standard HS medium (BC-HS). The morphology and nanofibre diameter (11–85 nm) of the resulting BC were not significantly affected; however, BC-MHS showed higher crystallinity (~78%) and a higher degradation temperature (~357 °C) than BC-HS. Conversely, the modified medium slightly reduced the mechanical performance of the BC in terms of elongation at break, tensile strength, and Young’s modulus. Overall, avocado seed waste was successfully transformed into a value-added material, demonstrating its potential for agro-industrial waste valorisation through scalable and sustainable biorefinery processes.


  • Improvement to Reduce Delivery Times Using 5S, Kanban and Standardized Work in a Plastic Company: A Peruvian Empirical Review

    by Fernanda Mendoza, Mary Rosales, Alberto Flores-Perez

    The objective of this research was to propose a solution to the delay in order delivery in a Peruvian SME dedicated to the production of plastic containers, using lean tools such as 5S, Kanban, and standardized work. The 5S methodology was used to organize and organize the area, Kanban to control and improve the pace of work, and standardized work to ensure that everyone follows the same method. Through a pilot test, it was validated that this solution reduces the delivery time of generated orders to competitive levels in the industry. Furthermore, the pilot test resulted in a 45.5% reduction in delivery time.

  • Productivity Improvement in a Peruvian Construction Company Using Lean Construction, Lean Six Sigma and TQM

    by Marife Alexandra Durand Pun, Ken Stefano Ganaja Kobashigawa, Alberto Enrique Flores-Perez

    Productivity in the construction sector has experienced a recent growth of 1% on average, which is very low, and this is reflected in economic losses for construction companies and, consequently, low productivity. The main problems that generate these losses are process delays due to unproductive time, construction material losses (referred to as waste) and the lack of total quality in the construction project. Therefore, this research seeks to eliminate or reduce as much as possible the low productivity in a company in the construction sector. For the situational analysis, diagnostic tools such as the Critical to Quality tree, the Ishikawa diagram and the 5 Whys were used. Likewise, the improvement tools applied were Lean Construction, Lean Six Sigma and Total Quality Management. From the results obtained, it was concluded that the improvement in non-productive time was 22%, concrete and steel material losses were mitigated by 5% and quality errors were reduced by 50%. The results were validated by means of a pilot test and the Arena simulator. An economic validation was also conducted using @Risk software, where an NPV of USD 8428, an IRR of 28.6% and a cost-benefit ratio of 2.1 were obtained.

  • Open Access

    Implementing Lean and TPM for Machine Availability Enhancement: A Case Study in the Peruvian Food Processing Industry

    by Luis Mauricio Mariluz-Cuadros, Brandon Minaya-Sanchez, Alberto Enrique Flores-Pérez

    The food manufacturing industry, especially small and medium-sized enterprises (SMEs), faces critical challenges related to operational inefficiencies and machine availability. Previous research has highlighted the need for Lean Manufacturing tools like 5S, SMED, and Total Productive Maintenance (TPM) to address these issues. This study aimed to improve equipment availability and reduce downtimes in a food processing SME in Peru, focusing on optimizing production through these methodologies. The proposed solution involved the application of Lean tools to restructure workplace organization, streamline machine setup times, and implement autonomous maintenance practices. Key findings demonstrated a significant improvement, with equipment availability increasing from 77.01% to 82%, and a reduction in setup times by 30.81%. The study’s contribution is both academic and practical, providing a replicable model for similar SMEs in the food industry. Future research should explore further adaptations of Lean-TPM frameworks to enhance sustainability and long-term operational performance across various sectors.

  • Open Access

    Integrating Lean and TPM for Process Efficiency Improvement in Peruvian Textile SMEs: A Case Study in Sewing Line Optimization

    by Carla Elizabeth Lazo-García, Fressia Palomino-Urrutia, Alberto Flores-Pérez

    This research addresses inefficiencies in Peruvian textile SMEs, focusing on improving sewing operations. Existing studies highlight the effectiveness of Lean Manufacturing and Total Productive Maintenance (TPM) in enhancing productivity, but few examine their application in textile SMEs. The case study implemented SMED to reduce setup times and autonomous maintenance to minimize machine downtime, combined with linear programming to optimize production scheduling. The study yielded significant results: sewing efficiency improved by 26.80%, setup times decreased by 30.97%, and machine downtime reduced by 33.83%. These outcomes validate the integration of Lean and TPM as an effective solution for enhancing operational performance in textile SMEs. Academically, this research contributes to the growing body of knowledge on Lean and TPM in small enterprises, while socio-economically, it promotes competitiveness and sustainable growth in the Peruvian textile sector. This study encourages further research on adapting Lean and TPM tools to various industries, emphasizing the need for continuous improvement in operational efficiency.

  • Open Access

    Integrating Lean Logistics and CONWIP for Operational Efficiency: A Case Study of Fruit Maquiladora SMEs in Peru

    by Mario Andre Arcasi-Mariño, Rolando Omar Najar-Cardozo, Alberto Enrique Flores-Pérez

    The agro-export sector in Peru is crucial, especially fruit maquiladora SMEs, which face efficiency and competitiveness issues due to unproductive times in packaging and cooling processes. These challenges increase costs and reduce profitability, demanding urgent interventions. The study proposed a Lean Logistics model integrating tools like VSM, CONWIP, and 5S to optimize operations, enhance space utilization, and reduce waste. Key findings included a reduction in service lead time by 55.57%, cooling process wait time by 95.24%, and overall improvement in storage capacity by 41.04%, demonstrating the model's effectiveness. The research’s impact extends academically by providing a scalable model for similar sectors, while socioeconomically, it enhances SME competitiveness and job opportunities. The results underline the importance of continuous improvement and call for further research to expand and refine lean applications in agro-export and other critical industries.

  • Open Access

    Application of the DMAIC Framework, Lean Logistic and Change Management to Improve Logistics Performance: A Peruvian Pharmaceutical SME Case Study

    by Xiomi Alexandra Maldonado-Condezo, Angie Margoth Quispe-Palacin, Alberto Enrique Flores-Pérez

    Pharmaceutical SMEs in Peru face significant logistical challenges, particularly in their On-Time In-Full (OTIF) performance. Prior research suggests that Lean Six Sigma, combined with Kotter’s Change Management model, can effectively reduce operational inefficiencies, yet most studies focus on larger enterprises. This study addressed urgent issues like procurement delays and packaging errors by applying the DMAIC framework and Kotter’s model to ensure successful implementation of new practices. The objective was to enhance OTIF and streamline operations. Results showed a 40% reduction in dispatch times and a 15.66% improvement in OTIF, rising from 81.5% to 94.26%, with procurement efficiency increasing by 23.29%. This research contributed to the literature by integrating Lean Six Sigma and Kotter’s model in SMEs, improving competitiveness and operational performance in the pharmaceutical sector. Future research should explore broader applications of these methodologies in SME logistics across various industries.

  • Open Access

    A TPM-Based Maintenance Model for Enhancing Efficiency in Automotive Battery SMEs: A Case Study in Peru

    by Herzan Antonio Lino-Uribe, Lucy Stephanie Schultz-Lajo, Alberto Enrique Flores-Pérez

    The study addresses the operational challenges faced by small and medium-sized enterprises (SMEs) in automotive battery manufacturing. Previous research indicates inefficiencies in maintenance and quality control impacting productivity. This investigation aimed to overcome these challenges through the implementation of a Total Productive Maintenance (TPM) model tailored for battery manufacturers. The proposed model included structured phases of planning, testing, implementation, and validation to enhance equipment reliability and reduce downtime. Key findings demonstrated a significant improvement in operational efficiency by 13.85% and a decrease in non-conforming products by 25.58%. The study’s contribution lies in adapting TPM strategies to the specific context of battery manufacturing SMEs, offering a scalable framework for operational improvements. This research has implications for enhancing competitiveness and sustainability in the automotive supply chain. Future studies are encouraged to refine and expand this model in similar industrial sectors to foster continuous improvement.

  • Open Access

    Increased Productivity through SMED and TPM in a Metalworking SME: An Empirical Investigation in the Peruvian Industry

    by Luigi Renzo Vargas Fiestas, Harry Sebastian Fry Guimet, Alberto Enrique Flores-Perez

    The objective of this study is to increase productivity and availability to improve profitability and competitiveness in the metal-mechanic sector. The case study is based on the implementation of TPM and SMED in an aluminum bolt production process in a Peruvian SME of the metal-mechanic sector where the current productivity is 9.23 units/man-hour. SMED transforms internal activities by external ones in order to reduce the production cycle time. TPM autonomous/preventive makes it possible to apply a constant scheduled maintenance that improves and facilitates the activities performed by the machine in order to reduce operator effort and increase OEE. The implementation was validated through a pilot test that lasted 4 months where the results obtained were: 38.40% improvement in OEE, cycle time reduction from 6.51 minutes to 4.52 minutes, 16.93% increase in availability, MTBF increase from 12.5 to 22.43 hours/failure, MTTR reduction from 6.4 to 4.57 hours/failure, 30% performance improvement and productivity increase to 13.28 units/man-hour.

  • Open Access

    Reducing Turnaround Time in a Clinical Laboratory by Using a Management Model Utilizing Process Automation and Lean Healthcare

    by Marcos Diaz Amaro Alberto Flores-Perez, Almendra Alexia Salazar Carrillo, Alberto Flores-Perez

    A clinical Flow Cytometry laboratory underwent a diagnosis of its TAT indicator over a period of one year, finding an excess of 3.83 hours or 15.94% with respect to the 24-hour sector range. The response time (TAT) in a clinical laboratory is an indicator that measures the efficiency and quality of the service offered by delivering results reports on time. A TAT within the established parameters makes it possible to offer rapid treatment to patients, respond to the demand of an aging population and combat limited resources. As a proposal to improve the situation, pilot tests were implemented in the laboratory by applying lean Healthcare tools (KANBAN, SMED) and the automation method to its operational processes. Through a statistical validation of the results obtained through Student's t-test, a reduction of 12.86% of the TAT and the elimination of non-compliant products generated in the laboratory marking area is affirmed. Likewise, the project will be considered economically viable with an IRR of 67% and a B/C of 2.27. Finally, the project also contributes to the sustainable development goals towards 2030 number 3, 8 and 10.