LCLei Chen

Lei Chen

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Lei Chen has a total of 87 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Temperature Interface in Long-Distance Batch Pipelines: A Numerical Method for Suppressing Numerical Dissipation Combining Method of Characteristics and Akima Interpolation

    by Jiaxing Zou, Lei Chen, Qingdong Zhang, Fei Song, Xin Luo, Gang Liu

    Summary: During the sequential transportation of hot and cold fluids in long-distance pipelines, convective transport dominates the temperature evolution of the pipe fluid. Accurate numerical simulation provides crucial support for engineering operation and scheduling. Aiming at the severe numerical dissipation and resultant nonphysical broadening of temperature interfaces in the commercial software Stoner Pipeline Simulator (SPS) and the traditional method of characteristics (MOC) with linear interpolation (MOC-Linear), we propose a numerical computational framework that integrates the MOC with locally adaptive piecewise Akima interpolation. The framework discretizes the computational grid based on a characteristic velocity of 2.5 m/s, ensuring the Courant-Friedrichs-Lewy (CFL) number stays strictly below unity to satisfy the numerical stability criterion. Two typical operating conditions are designed for method validation: first, a step fluctuation of flow velocity (1.5 m/s→1.0 m/s) under a constant temperature field, for verifying numerical stability; second, a step change of temperature (45°C→35°C) under a constant flow velocity field, for evaluating antidissipation performance. An additional temperature step condition for large-diameter water transportation is included to verify the general applicability of the method across different fluid media and pipe diameters. The results show that under the flow velocity fluctuation condition, the temperature results from SPS, MOC-Linear, and MOC-Akima are fully consistent with no spurious oscillations, verifying the robustness of the proposed framework for smooth temperature fields. Under the temperature step condition, MOC-Akima effectively suppresses numerical dissipation: After 20 hours of simulation, the interface width is narrowed by approximately 70% compared with the 12.0 km yielded by MOC-Linear and by more than 90% compared with the 38.0 km yielded by SPS. Furthermore, MOC-Akima is insensitive to timestep variations and maintains a sharp temperature interface even with a relatively large timestep, striking a favorable balance between computational cost and accuracy. This numerical framework provides a reliable solution for temperature interface tracking in long-distance sequential transportation pipelines.

  • Open Access

    A Frequency-Domain Physics-Informed Fourier Neural Operator for Guided Wave Modeling in Multi-Plate Welded Structures

    by Yuxuan Dong, Xu Zhang, Gang Liu, Lei Chen

    Constructing high-fidelity wavefield databases for intelligent ultrasonic guided wave testing in complex industrial structures (e.g., multi-plate assemblies with intersecting welds) is bottlenecked by FEM simulation cost. Existing neural operator surrogates predominantly adopt time-domain autoregressive formulations, suffering from error accumulation and high memory overhead. This paper proposes a frequency-domain Physics-Informed Fourier Neural Operator (PI-FNO) that directly maps spatially distributed structural parameters (local thickness, Lamé constants, and density) together with the excitation frequency, to the steady-state complex displacement field, entirely bypassing temporal iteration. Physical consistency is enforced via 3D elastodynamic constraints and a physics-aware spatial reweighting (PASR) module targeting weld regions. The framework is validated on a typical "3-plate 2-weld" petrochemical tank floor unit. Ablation over six model configurations demonstrates that the full PI-FNO with 3D Navier constraints and PASR achieves the lowest N-MSE of 0.0795 globally and 0.0579 at weld regions, with SSIM of 0.940, substantially outperforming both the pure data-driven FNO baseline and an equivalent U-Net. Under data-limited conditions, the Navier PI-FNO achieves comparable accuracy to the baseline with only half the training samples. Physical validation combining f-k dispersion analysis and time-domain LDV comparison confirms that the PI-FNO accurately captures mode conversion and time-of-flight kinematics, demonstrating reliable sim-to-real transferability.

  • Analysis of intrinsic laser acoustic emission signals and noise decoupling in metal sheets under pulsed current excitation

    by Shibin Jiang, Shuo Yan, Peng Chen, Xiangquan Zhang, Zhuoyan Zhi, Lei Chen, Gang Liu

  • Open Access

    Study on the Impact of Naphtha and Light Fuel Oil on Key Quality Indicators of Gasoline and Diesel

    by Wang Yubin, Tang Lingjun, Jiang Luxin, Li Zhengbing, Chen Lei

    The blending of naphtha and light fuel oil with gasoline and diesel during pipeline batch transportation poses risks of quality non-compliance. This study experimentally investigates the impact of these contaminants on key quality indicators to establish quantitative blending thresholds. Based on a volume-gradient experimental design (0–50 vol% for naphtha, 0–15 vol% for light fuel oil), diesel blends were tested for pour point, flash point, and 95% recovery temperature, while gasoline blends were tested for final boiling point, all in accordance with Chinese national standards. Results demonstrate that light fuel oil contamination in gasoline causes a linear increase in the final boiling point (y = 18.77x + 185.09, R2 = 0.91), exceeding the 205 °C limit at concentrations above 1.2 vol%. Naphtha contamination in diesel leads to a sharp linear decline in flash point (y = −13.20x + 101.83, R2 = 0.84), falling below the 60 °C threshold at concentrations above 3.0 vol%. Diesel pour point increases linearly with light fuel oil concentration (y = 0.39x − 26.41, R2 = 0.88) but remains within specification up to 15 vol%. These quantitative thresholds, derived from statistically significant regression models, provide a scientific basis for optimizing cut-point strategies and mitigating safety risks in product oil pipeline operations.

  • Open Access

    Study on the Mixture Patterns and Dynamic Growth Rate of Sequential Transport of Refined Oil and Liquid Ammonia Based on Their Low Solubility Characteristics

    by Jiong Wang, Zihan Wang, Gang Liu, Lei Chen

    Ammonia, as a hydrogen carrier and clean fuel, has an increasingly urgent demand for large-scale transportation. Utilizing the existing refined oil pipeline network for sequential transportation of ammonia and refined oil is an economically and efficiently feasible solution. However, the unique micro-solubility characteristics of ammonia and refined oil can cause significant differences in the mixing mechanism of the two substances during sequential transportation in the pipeline compared to traditional oil products. This study conducts transient flow numerical simulation and mechanism research on the mixing problem during the sequential transportation process of ammonia and refined oil under the influence of micro-solubility transfer. Using the ANSYS Fluent platform and combining it with the dynamic mesh technology, a sequential transportation pipeline model was constructed. In the VOF multiphase flow model framework, the Fick diffusion and convective transfer theories were coupled. Through the development of user-defined functions, a transfer model was established to describe the ammonia dissolution process in refined oil during sequential transportation. This model characterizes the axial transfer process of the two-phase flow and the dissolution transfer in the pipeline. Then, the correctness and accuracy of the transfer model were verified, proving that the model has reliable simulation capabilities. To evaluate the comprehensive influence of various engineering factors on the mixing law, this study selected seven key parameters. It then designed and simulated multiple sets of comparative conditions. The influence of each parameter on the development of the mixing section was analyzed, and a sensitivity analysis was conducted. Subsequently, using the growth rate of the mixing length (dL/dt) as the dependent variable to represent the dynamic development of the mixing process, and using the above seven parameters as independent variables, a semi-empirical fitting formula was established. This formula can comprehensively reflect the coupling effect of multiple factors. The results show that the model has good generalization ability and extrapolation robustness. It provides a prediction model and theoretical tool with certain engineering practical value. This can be used for predicting the amount of mixing and optimizing operating parameters in actual pipeline sequential transportation systems.

  • Research on a Rapid Calculation Method for External Unsteady Temperature Field of Long-Distance Buried Pipelines

    by Xin Luo, Lei Chen, Chunlei Xu, Gang Liu, Jiaxing Zou, Qingfeng Sun

    Summary: During the transportation process of long-distance buried pipelines, the medium inside the pipeline and the semi-infinite soil space outside form a 3D unsteady heat transfer system. When simulating dynamic operational processes, the pipeline is modeled as a 1D system, thereby rendering the calculation of the external 3D unsteady soil temperature field the primary computational effort in overall simulations. Traditional analytical methods are unable to characterize the complex problem of 3D unsteady temperature fields, while numerical calculation methods have the problem of slow calculation speed. In this paper, we propose a rapid calculation method for unsteady temperature fields. Using the superposition principle and the Duhamel principle, the boundary conditions are decomposed to obtain the auxiliary problem. A proxy solution is constructed to represent the auxiliary problem, and the unsteady temperature field is rapidly solved by superimposing the proxy solution with the original boundary conditions. Compared with numerical methods, the new method improves the calculation speed of the global temperature field outside a single pipeline by 21 times. For the critical temperature field near the pipeline, which directly affects the overall heat transfer coefficient, the calculation speed is improved by 120 times, with a maximum temperature error of no more than 0.15°C across the entire domain and period. The method also applies to more complex scenarios, such as parallel double pipelines. This approach provides an accurate and efficient solution for calculating the external unsteady temperature field of long-distance buried pipelines, offering significant engineering application value.


  • Open Access

    Bottom Plate Damage Localization Method for Storage Tanks Based on Bottom Plate-Wall Plate Synergy

    by Yunxiu Ma, Linzhi Hu, Yuxuan Dong, Lei Chen, Gang Liu

    Ultrasonic guided waves can be employed for in-service defect detection in storage tank bottom plates; however, conventional single-array approaches face challenges from boundary scattering noise at side connection welds. This study proposes a collaborative bottom plate-wall plate detection methodology to address these limitations. Sensor arrays were strategically deployed on both the bottom plate and wall plate, achieving multidimensional signal acquisition through bottom plate array excitation and dual-array reception from both the bottom plate and tank wall. A correlation coefficient-based matching algorithm was developed to distinguish damage echoes from weld-induced scattering noise by exploiting path-dependent signal variations between the two arrays. The investigation revealed that guided wave signals processed through data matching effectively preserved damage echo signals while substantially attenuating boundary scattering signals. Building upon these findings, correlation matching was implemented on guided wave signals received by corresponding array elements from both the bottom plate and wall plate, followed by total focusing imaging (TFM) using the processed signals. Results demonstrate that the collaborative bottom plate-wall plate detection imaging cloud maps, after implementing signal correlation matching, effectively suppress artifacts compared with imaging results obtained solely from bottom plate arrays. The maximum relative localization error was measured as 5.4%, indicating superior detection accuracy.


  • Open Access

    Research on Mechanism of Methanol–Hydrogen Co-Transport Inhibiting Hydrogen Embrittlement in Pipeline Steel

    by Li Xiao, Jia Gu, Hongwei Yang, Lei Chen, Gang Liu

    Existing studies suggest that hydrogen embrittlement will occur in pipeline steel under a hydrogen environment, and gas is often used as a hydrogen embrittlement inhibitor. As one of the most effective hydrogen carriers, methanol may competitively adsorb with hydrogen on the surface of pipeline steel and inhibit the hydrogen embrittlement when co-transported with hydrogen through pipelines. Moreover, the low saturated vapor pressure of methanol is more conducive to its separation from hydrogen in the downstream. This study investigates the effect of methanol on hydrogen embrittlement in X80 steel through closed in situ tensile testing, revealing that methanol can effectively inhibit hydrogen embrittlement. Further molecular simulations confirm that the methanol liquid film acts as a hydrogen barrier. Through the adoption of methanol–hydrogen two-phase mixed transportation and the rational control of the gas–liquid flow pattern, it is promising to achieve the coordinated transportation of various hydrogen energy carriers while effectively inhibiting the hydrogen embrittlement of pipeline materials.