Cherngye Hwang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Cherngye Hwang has a total of 27 co-authors. Here are the top co-authors by number of shared publications:
Hisashi Takano
Western Digital Inc. 3 , Fujisawa site, Kanagawa 252-0811
5 shared publications- Pham Nam Hai
Department of Electrical and Electronic Engineering, Institute of Science Tokyo, Tokyo 152-8552, Japan
5 shared publications - Quang Le
Western Digital Inc. 2 , Great Oaks site, San Jose, California 95119
5 shared publications - Son Le
Western Digital Inc. 2 , Great Oaks site, San Jose, California 95119
5 shared publications - Xiaoyong Liu
Western Digital Inc. 2 , Great Oaks site, San Jose, California 95119
5 shared publications Brian York
Western Digital Inc. 2 , Great Oaks site, San Jose, California 95119
4 shared publications
Latest Publications
- 8 December 2025
- Published by AIP Publishing in Applied Physics Letters
- Vol. 127 (23)
Giant perpendicular magnetic anisotropy in Mo/Boron-rich CoFeB/MgAl2O4 structure
Perpendicular magnetic tunnel junctions (p-MTJs) with perpendicular magnetic anisotropy (PMA) are key devices for scaling magnetoresistance random access memories down to ∼10 nm. However, the magnetic anisotropy field Hk of the intensively studied CoFeB/MgO is still about 4–6 kOe for bottom CoFeB, and the corresponding magnetic anisotropy energy coefficient Keff is about 3 × 106–5 × 106 erg cm−3. In this study, we aim to realize a giant PMA in Mo (2 nm)/Co19Fe56B25 (tCoFeB)/MgAl2O4 (4 nm)/Ta (1 nm) stack. By using the Boron-rich Co19Fe56B25 layer in combination with the Boron-blocking Mo underlayer and the spinel MgAl2O4 oxide layer, we can realize giant PMA in CoFeB with Hk as high as 17.5–19.5 kOe and Keff as high as 6.9 × 106–9.4 × 106 erg cm−3. Auger electron spectroscopy depth profiles reveal that the good balance between the Boron-blocking Mo layer and the Boron-sink MgAl2O4 layer results in about 20% of the original Boron remaining in CoFeB, leading to a small magnetization and giant PMA. Our results pave the way for further scaling of MTJs and improved resistance against thermal and external magnetic field disturbance.
- 8 December 2025
- Published by AIP Publishing in Applied Physics Letters
- Vol. 127 (23)
Giant perpendicular magnetic anisotropy in Mo/Boron-rich CoFeB/MgAl2O4 structure
Perpendicular magnetic tunnel junctions (p-MTJs) with perpendicular magnetic anisotropy (PMA) are key devices for scaling magnetoresistance random access memories down to ∼10 nm. However, the magnetic anisotropy field Hk of the intensively studied CoFeB/MgO is still about 4–6 kOe for bottom CoFeB, and the corresponding magnetic anisotropy energy coefficient Keff is about 3 × 106–5 × 106 erg cm−3. In this study, we aim to realize a giant PMA in Mo (2 nm)/Co19Fe56B25 (tCoFeB)/MgAl2O4 (4 nm)/Ta (1 nm) stack. By using the Boron-rich Co19Fe56B25 layer in combination with the Boron-blocking Mo underlayer and the spinel MgAl2O4 oxide layer, we can realize giant PMA in CoFeB with Hk as high as 17.5–19.5 kOe and Keff as high as 6.9 × 106–9.4 × 106 erg cm−3. Auger electron spectroscopy depth profiles reveal that the good balance between the Boron-blocking Mo layer and the Boron-sink MgAl2O4 layer results in about 20% of the original Boron remaining in CoFeB, leading to a small magnetization and giant PMA. Our results pave the way for further scaling of MTJs and improved resistance against thermal and external magnetic field disturbance.
- Open Access
- 25 March 2025
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 137 (12)
Effects of metal, oxide, and hybrid metal-oxide interlayers on spin–orbit torque in BiSb topological insulator and magnetic interfaces
The charge-to-spin conversion efficiency at the interface between a topological insulator and a ferromagnetic (FM) layer can be enhanced by inserting an interlayer (ITL). However, the mechanism of this enhancement is unclear. In this work, we systematically investigate the ITL effects by introducing various metal, oxide, and hybrid metal/oxide ITL between a BiSb topological insulator and a CoFe ferromagnetic layer. Our findings revealed that using a metallic NiFeGe or insulating MgO ITL resulted in similarly high efficiencies, with the highest efficiency achieved when employing hybrid NiFeGe/MgO ITL. However, efficiency decreased when NiFeGe was combined with MgTiO with increasing TiO composition. Such behaviors can be qualitatively understood by considering the ITL intrinsic effect of enhancing the intrinsic spin Hall angle of BiSb via preventing Sb diffusion from BiSb and migration of the FM and the extrinsic effect where the ITL spin transparency is determined by the spin tunneling/diffusion across the ITL and the spin-flip/spin-transfer at the ITL/FM interface. This study provides valuable insights and a framework for understanding and optimizing interlayer materials for ultralow power spin–orbit torque applications.
- 25 March 2025
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 137 (12)
Open AccessEffects of metal, oxide, and hybrid metal-oxide interlayers on spin–orbit torque in BiSb topological insulator and magnetic interfaces
The charge-to-spin conversion efficiency at the interface between a topological insulator and a ferromagnetic (FM) layer can be enhanced by inserting an interlayer (ITL). However, the mechanism of this enhancement is unclear. In this work, we systematically investigate the ITL effects by introducing various metal, oxide, and hybrid metal/oxide ITL between a BiSb topological insulator and a CoFe ferromagnetic layer. Our findings revealed that using a metallic NiFeGe or insulating MgO ITL resulted in similarly high efficiencies, with the highest efficiency achieved when employing hybrid NiFeGe/MgO ITL. However, efficiency decreased when NiFeGe was combined with MgTiO with increasing TiO composition. Such behaviors can be qualitatively understood by considering the ITL intrinsic effect of enhancing the intrinsic spin Hall angle of BiSb via preventing Sb diffusion from BiSb and migration of the FM and the extrinsic effect where the ITL spin transparency is determined by the spin tunneling/diffusion across the ITL and the spin-flip/spin-transfer at the ITL/FM interface. This study provides valuable insights and a framework for understanding and optimizing interlayer materials for ultralow power spin–orbit torque applications.
- 9 December 2024
- Published by AIP Publishing in Applied Physics Letters
- Vol. 125 (24)
Spin Hall magnetic field sensing device using topological insulator
The “direct” spin Hall (DSH) effect has been intensively studied to manipulate the magnetic state in spin–orbit torque magnetic random access memory. Meanwhile, its reciprocal phenomenon, known as the “inverse” spin Hall (ISH) effect, has been studied as a method to read the magnetic state of a magnetic element in a magnetic read head sensor and magnetoelectric spin–orbit logic device. This work studies a magnetic field sensing device structure in which the DSH effect is used for reading the magnetic state in a ferromagnetic (FM)/topological insulator (TI) heterostructure. We found that while the output of our DSH sensing device is consistent with that based on the ISH effect, the spin Hall angle calculated from its magnitude is colossal (θSH ∼ 164) and significantly higher than that (θSH ∼ 3.5) obtained from the second harmonic measurement. Our findings show that the giant DSH and ISH effects in TI-based heterostructures are useful for realizing next-generation magnetic read head device and have important implications for engineering topological quantum materials with high spin Hall performance.
- 9 December 2024
- Published by AIP Publishing in Applied Physics Letters
- Vol. 125 (24)
Spin Hall magnetic field sensing device using topological insulator
The “direct” spin Hall (DSH) effect has been intensively studied to manipulate the magnetic state in spin–orbit torque magnetic random access memory. Meanwhile, its reciprocal phenomenon, known as the “inverse” spin Hall (ISH) effect, has been studied as a method to read the magnetic state of a magnetic element in a magnetic read head sensor and magnetoelectric spin–orbit logic device. This work studies a magnetic field sensing device structure in which the DSH effect is used for reading the magnetic state in a ferromagnetic (FM)/topological insulator (TI) heterostructure. We found that while the output of our DSH sensing device is consistent with that based on the ISH effect, the spin Hall angle calculated from its magnitude is colossal (θSH ∼ 164) and significantly higher than that (θSH ∼ 3.5) obtained from the second harmonic measurement. Our findings show that the giant DSH and ISH effects in TI-based heterostructures are useful for realizing next-generation magnetic read head device and have important implications for engineering topological quantum materials with high spin Hall performance.
- Open Access
- 12 February 2024
- Published by AIP Publishing in Applied Physics Letters
- Vol. 124 (7)
High spin Hall angle in BiSb topological insulator and perpendicularly magnetized CoFeB/MgO multilayers with metallic interfacial layers
In this study, we investigate the spin Hall effect in heterostructures of Bi0.85Sb0.15 (10 nm) topological insulator/Ru(Ti)/Ta/Co20Fe60B20/MgO with perpendicular magnetic anisotropy. By optimizing the Ru (Ti) interfacial layer thickness as well as deposition condition of BiSb, we achieve a large effective spin Hall angle of 6.0 ± 0.1 and relatively high electrical conductivity of 1.5 × 105 Ω−1 m−1 at room temperature. We, then, demonstrate spin–orbit torque-induced magnetization switching driven by a small threshold current density of 1 × 106 Acm−2. Benchmarking shows that the writing power consumption of our stack is 2–3 orders smaller than that of heavy metals.
- 12 February 2024
- Published by AIP Publishing in Applied Physics Letters
- Vol. 124 (7)
Open AccessHigh spin Hall angle in BiSb topological insulator and perpendicularly magnetized CoFeB/MgO multilayers with metallic interfacial layers
In this study, we investigate the spin Hall effect in heterostructures of Bi0.85Sb0.15 (10 nm) topological insulator/Ru(Ti)/Ta/Co20Fe60B20/MgO with perpendicular magnetic anisotropy. By optimizing the Ru (Ti) interfacial layer thickness as well as deposition condition of BiSb, we achieve a large effective spin Hall angle of 6.0 ± 0.1 and relatively high electrical conductivity of 1.5 × 105 Ω−1 m−1 at room temperature. We, then, demonstrate spin–orbit torque-induced magnetization switching driven by a small threshold current density of 1 × 106 Acm−2. Benchmarking shows that the writing power consumption of our stack is 2–3 orders smaller than that of heavy metals.
- 30 January 2023
- Published by AIP Publishing in Applied Physics Letters
- Vol. 122 (5) , 052401
Large inverse spin Hall effect in BiSb topological insulator for 4 Tb/in2 magnetic recording technology
It is technically challenging to shrink the size of a tunneling magnetoresistance reader to below 20 nm for magnetic recording technology beyond 4 Tb/in2 due to its complex film stack. Recently, we proposed a reader architecture based on the inverse spin Hall effect to resolve those challenges, referred below as spin–orbit torque (SOT) reader, whose structure consists of a SOT layer and a ferromagnetic layer. However, the heavy metal-based SOT reader has small output voltage and low signal-to-noise ratio (SNR) due to the limited spin Hall angle θSH (< 1) of heavy metals. In this Letter, we demonstrate the integration of BiSb topological insulator with strong inverse spin Hall effect into the SOT reader that can significantly improve the output voltage and SNR. First, we theoretically calculate the noises in a 20 × 20 nm2 BiSb-based SOT reader to establish the relationships between SNR and θSH at various bias currents. We then demonstrate proof-of-concept BiSb-based SOT readers using CoFe/MgO/BiSb stack, which show large output voltages up to 15 mV at an input current of 9.4 kA/cm2 at room temperature. We project a giant θSH = 61 for BiSb. Our work demonstrates the potential of BiSb for SOT reader beyond 4 Tb/in2 magnetic recording technology.
- 30 January 2023
- Published by AIP Publishing in Applied Physics Letters
- Vol. 122 (5) , 052401
Large inverse spin Hall effect in BiSb topological insulator for 4 Tb/in2 magnetic recording technology
It is technically challenging to shrink the size of a tunneling magnetoresistance reader to below 20 nm for magnetic recording technology beyond 4 Tb/in2 due to its complex film stack. Recently, we proposed a reader architecture based on the inverse spin Hall effect to resolve those challenges, referred below as spin–orbit torque (SOT) reader, whose structure consists of a SOT layer and a ferromagnetic layer. However, the heavy metal-based SOT reader has small output voltage and low signal-to-noise ratio (SNR) due to the limited spin Hall angle θSH (< 1) of heavy metals. In this Letter, we demonstrate the integration of BiSb topological insulator with strong inverse spin Hall effect into the SOT reader that can significantly improve the output voltage and SNR. First, we theoretically calculate the noises in a 20 × 20 nm2 BiSb-based SOT reader to establish the relationships between SNR and θSH at various bias currents. We then demonstrate proof-of-concept BiSb-based SOT readers using CoFe/MgO/BiSb stack, which show large output voltages up to 15 mV at an input current of 9.4 kA/cm2 at room temperature. We project a giant θSH = 61 for BiSb. Our work demonstrates the potential of BiSb for SOT reader beyond 4 Tb/in2 magnetic recording technology.