XMXiren Miao

Xiren Miao

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Xiren Miao has a total of 69 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • A Magnetically Integrated Adaptive Fault Current Limiter for Low-Voltage DC Distribution Systems

    by Jinjie Lin, Siqing Chen, Minyi Fu, Jing Zhang, Yong Li, Xiren Miao, Yixiu Guo, Yijia Cao

    Low-voltage direct current (LVDC) distribution system facilitates the efficient integration of renewable energy sources (RESs) and various DC loads. However, it is susceptible to DC faults due to the mismatch between the VSC blocking time and the tripping time of DC circuit breakers (DCCBs). To this end, this paper proposes the magnetically integrated adaptive fault current limiter (MIAFCL) for LVDC distribution systems, which resolves two major issues in current research: (i) inadequate adaptability to changing operational conditions, and (ii) incompatibility in space-constrained installation scenarios. First, a novel fault current limiter topology is presented, and the stage-topology adaptive adjustment mechanism is developed to make it exhibit low intervention under normal conditions and effective current limitation during fault events. Subsequently, a high- and low-frequency reactor integration scheme for MIAFCL based on non-orthogonal decoupling method is proposed. This scheme mitigates core saturation, improving current-limiting performance and significantly enhancing component integration. Additionally, a detailed parametric design approach is proposed for the magnetic integration and circuit configuration of the MIAFCL. Finally, the effectiveness and superiority of the proposed method are validated through simulation and experimental verification, as well as comparisons with existing studies.

  • Anomaly Detection for Self-Powered Neutron Detectors Using the Burnup-Adaptive Spatial-Temporal Model

    by Weiqing Lin, Hao Jiang, Jianfei Yang, Pengbin Duan, Yong Xu, Xinyu Liu, Jing Chen, Xiren Miao

    Self-powered neutron detectors (SPNDs) are critical instruments in nuclear power plants (NPPs), yet their malfunctions may result in misperception and misdiagnoses. Plentiful SPNDs are deployed at various locations and reflect neutron fluence rate in nuclear reactors, empirically derived spatial correlations via Wasserstein distance. However, existing detection methods seldom consider gradual shifts in data distribution and spatial correlations induced by reactor burnup. Hence, this study proposes an SPND-oriented anomaly detection scheme named the burnup-adaptive spatial-temporal model (BA-STM). The scheme abstracts the SPND topology as a graph structure and utilizes a mix-hop temporal convolutional network (MTCN) to extract spatial-temporal interdependencies among overall SPNDs. To alleviate discrepancies across different burnup stages, BA-STM consists of the adversarial discriminator for driving MTCN to learn domain-invariant spatial-temporal features and the lightweight attention reconstructor for filtrating pivotal information in complicated features, further obtaining reconstructed SPND signals and residuals. Through variable-boundary detection, BA-STM quantifies SPND abnormal behavior based on residual statistics exceeding the variable boundaries, enabling effective detection. Experiments on SPND data from a real-world NPP with simulated anomalies verify that the BA-STM exhibits superior performance, reaching optimal F1 scores of 97.915% and 97.671% for single-SPND anomaly detection as well as 97.741% and 97.067% for multi-SPND anomaly detection.

  • CiUAV: Scalable Device-Free Indoor UAV Localization via Multiobjective Optimized Network Using Channel State Information

    by Cunyi Yin, Chenwei Wang, Zhaoke Huang, Hao Jiang, Jing Chen, Xiren Miao, Shaocong Zheng, Jianfei Yang, Zhiwen Chen, Zhenghua Chen, et al.

    Accurate and scalable indoor localization for uncrewed aerial vehicles (UAVs) is essential for Internet of Things (IoT) applications such as autonomous logistics, infrastructure inspection, and emergency response in GPS-denied environments. However, traditional methods often struggle with cost, deployment complexity, and sensitivity to environmental dynamics, limiting their practicality for large-scale IoT scenarios. This article presents a method in which channel state information (CSI) from low-cost IoT sensors enables robust, device-free 3-D UAV localization while optimizing accuracy, sensor adaptability, and data efficiency. We propose CiUAV, leveraging CSI captured by ESP32-S3 sensors, with a robust CSI signal enhancement (RCSE) framework integrating dynamic automatic gain control (AGC) compensation (DAC) and adaptive noise suppression and outlier removal (ANSOR), alongside a sensor-in-sample (SiS) multiobjective optimization (MOO) model for adaptive multisensor fusion. Experimental evaluations in realistic indoor settings achieve a 3-D root-mean-squared error (RMSE) of 0.2659 m, outperforming baselines by up to 35% in accuracy and 50% in data efficiency. CiUAV offers a lightweight, scalable, and infrastructure-compatible solution for future IoT-enabled UAV systems.


  • A Magnetic Core Loss Modeling Method Based on Domain Adaptation Using Multiple Kernel Maximum Mean Discrepancy

    by Jing Chen, Yiyuan Liang, Xiangxi Li, Xinyu Liu, Hao Jiang, Xiren Miao, Liping Zhang

    Core loss is a crucial performance indicator for magnetic materials, significantly influencing the operational stability of electrical equipment regarding efficiency, dependability, and compactness. Traditional core loss calculation models are not very accurate since core loss depends on many different characteristics and operating conditions. In addition, there are numerous kinds of core materials used in engineering applications, which makes gathering a lot of information about them all challenging. This article proposes a magnetic core loss modeling approach based on multikernel maximum mean discrepancy domain adaptation to overcome these drawbacks. The method achieves cross-domain feature alignment by quantifying the differences in feature distributions across diverse magnetic core material datasets, enabling rapid adaptation to new magnetic core materials. In this article, experiments are conducted for three core materials, including N27, 3C94, and 78, in a small-sample scenario with 5% of the conventional training data size. The results demonstrate a 6.28% performance improvement compared to traditional data-driven methods without domain adaptation, indicating that the proposed approach achieves high computational accuracy while significantly reducing the required sample size for magnetic core materials.


  • Open Access

    CiUAV: A Multi-Task 3D Indoor Localization System for UAVs based on Channel State Information

    by Cunyi Yin, Chenwei Wang, Jing Chen, Hao Jiang, Xiren Miao, Shaocong Zheng Zhenghua Chen Senior, Hong Yan

    Accurate indoor positioning for unmanned aerial vehicles (UAVs) is critical for logistics, surveillance, and emergency response applications, particularly in GPS-denied environments. Existing indoor localization methods, including optical tracking, ultra-wideband, and Bluetooth-based systems, face cost, accuracy, and robustness trade-offs, limiting their practicality for UAV navigation. This paper proposes CiUAV, a novel 3D indoor localization system designed for UAVs, leveraging channel state information (CSI) obtained from low-cost ESP32 IoT-based sensors. The system incorporates a dynamic automatic gain control (AGC) compensation algorithm to mitigate noise and stabilize CSI signals, significantly enhancing the robustness of the measurement. Additionally, a multi-task 3D localization model, Sensor-in-Sample (SiS), is introduced to enhance system robustness by addressing challenges related to incomplete sensor data and limited training samples. SiS achieves this by joint training with varying sensor configurations and sample sizes, ensuring reliable performance even in resource-constrained scenarios. Experiment results demonstrate that CiUAV achieves a LMSE localization error of 0.2629 m in a 3D space, achieving good accuracy and robustness. The proposed system provides a cost-effective and scalable solution, demonstrating its usefulness for UAV applications in resource-constrained indoor environments.

  • Forecasting in-core power distributions in nuclear power plants via a spatial–temporal hierarchical-directed network

    by Weiqing Lin, Xiren Miao, Jing Chen, Pengbin Duan, Mingxin Ye, Yong Xu, Hao Jiang, Yanzhen Lu


  • SKAD: A Unified Framework Guided by Structural Knowledge for Anomaly Detection of Dampers in Transmission Lines

    by Jiahao Shi, Jing Chen, Hao Jiang, Xiren Miao, Lin Yang

    The dampers absorb transmission line vibration energy, reducing the vibration amplitudes of conductors. However, dampers may develop internal structural anomalies (e.g., damage to damper heads) or external positional anomalies (e.g., slippage along the conductor), both of which compromise vibration suppression efficacy. Existing anomaly detection methods focus on single anomaly type and struggle with local feature extraction. To address these limitations, this paper introduces SKAD, a unified framework guided by structural knowledge, to concurrently detect internal and external damper anomalies. SKAD encodes structural properties of dampers through four key structural points, enabling sub-pixel-level localization via a hybrid network (HRNet + GAU + SimCC). By analyzing spatial relationships and vector features of these structural points, SKAD can simultaneously detect anomalies like damage (via confidence thresholds and vector dot products) and slippage (via depth-parallelism-distance constraints) at the structural level. Experiments on a real-world dataset demonstrate SKAD outperforms object-based methods in accuracy and robustness, providing novel transmission line inspection perspectives, ensuring early anomaly detection to prevent conductor fatigue and power outages.

  • Fault Detection for Ex-Core Neutron Detectors in Nuclear Power Plants Using Global-Fused Dynamic Detection Model

    by Weiqing Lin, Xiren Miao, Jing Chen, Pengbin Duan, Mingxin Ye, Yong Xu, Xinyu Liu, Hao Jiang, Yanzhen Lu

    In nuclear power plants (NPPs), ex-core neutron detectors are deployed around reactor cores and are essential for reactor stability, but their deterioration and malfunction can cause misperceptions and misdiagnoses. Existing fault detection seldom accounts for global spatial-temporal coupling relationships implied among overall detectors and uncertainty under transient operations. Thus, we propose a novel detector-oriented fault detection scheme called the global-fused dynamic detection (GFDD) model, established by the global spatial-temporal graph (GSTG), moving-global graph convolution (MGGC), and uncertainty-quantified dynamic detection (UQDD). To enrich informational sources and disperse faulty propagation, we specifically design the GSTG for characterizing the spatial-temporal relationships among overall detectors and the MGGC for efficiently capturing global high-level features, further generating multi-detector reconstructed signals and residuals. Through calculating dynamic statistics and quantifying uncertainty under varying operating conditions, the UQDD identifies faulty detectors and corrects erroneous signals. Experiments on steady and transient states from a real-world NPP with simulated faults validate that the GFDD model outperforms various state-of-the-art methods with regard to signal reconstruction and fault detection.