Jin Tao
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Jin Tao has a total of 32 co-authors. Here are the top co-authors by number of shared publications:
Leigen Liu
Department of Textile, Garment and Design Suzhou University of Technology Suzhou China
3 shared publications- Jishu Zhang
School of Textile Garment & Design, Changshu Institute of Technology, Changshu 215500, China
2 shared publications - Changyuan Yu
The Hong Kong Polytechnic University
1 shared publication Chunmin Sheng
Zhejiang Dongtong Optical Network IoT Technology Co., Ltd,Huzhou,China
1 shared publication- Enqing Chen
University of Chinese Academy of Sciences, Beijing, China
1 shared publication - Feng Xu
College of Electronic and Optical Engineering & College of Microelectronics Nanjing University of Posts and Telecommunications Nanjing China
1 shared publication
Latest Publications
- 21 July 2025
- Published by Wiley in Macromolecular Rapid Communications
- p. e00464
All‐Fiber Electronic Skin Based on Asymmetric Wool/PTFE Structure for Energy Harvesting and Self‐Powered Sensing
This paper reports on a fully textile electronic skin (e‐skin) based on an asymmetric wool/polytetrafluoroethylene (PTFE) structure, which is fabricated through an innovative filling core yarn and weft interweaving technique, enabling self‐driven contact detection and motion sensing functions. The e‐skin features a three‐layer woven structure, with the outer layer made of PTFE (high dielectric constant, superhydrophobic), the inner layer composed of wool (hygroscopic, skin‐friendly), and a middle layer embedded with silver‐plated nylon (SPN) conductive yarns forming a flexible electrode array. Benefiting from its asymmetric design, this material exhibits excellent triboelectric performance (open‐circuit voltage of 37 V, short‐circuit current of 58 nA), breathability (341.9 mm/s), and mechanical durability (over 1000 cycles). Through modification with a polyacrylic acid coating, the PTFE side demonstrates superhydrophobicity (contact angle > 150°) and self‐cleaning capabilities. In practical applications, this e‐skin can accurately monitor the bending angle of the elbow joint (30°∼120°, R2 = 0.979) and recognize sliding gestures through differences in voltage waveforms. Additionally, it can drive commercial electronic devices and charge capacitors (4.7 µF capacitor charged to 4.5 V within 100 s). This study provides a scalable textile‐based solution for developing comfortable and durable self‐driven electronic skin, suitable for human‐computer interaction and health monitoring applications.
- 21 July 2025
- Published by Wiley in Macromolecular Rapid Communications
- p. e00464
All‐Fiber Electronic Skin Based on Asymmetric Wool/PTFE Structure for Energy Harvesting and Self‐Powered Sensing
This paper reports on a fully textile electronic skin (e‐skin) based on an asymmetric wool/polytetrafluoroethylene (PTFE) structure, which is fabricated through an innovative filling core yarn and weft interweaving technique, enabling self‐driven contact detection and motion sensing functions. The e‐skin features a three‐layer woven structure, with the outer layer made of PTFE (high dielectric constant, superhydrophobic), the inner layer composed of wool (hygroscopic, skin‐friendly), and a middle layer embedded with silver‐plated nylon (SPN) conductive yarns forming a flexible electrode array. Benefiting from its asymmetric design, this material exhibits excellent triboelectric performance (open‐circuit voltage of 37 V, short‐circuit current of 58 nA), breathability (341.9 mm/s), and mechanical durability (over 1000 cycles). Through modification with a polyacrylic acid coating, the PTFE side demonstrates superhydrophobicity (contact angle > 150°) and self‐cleaning capabilities. In practical applications, this e‐skin can accurately monitor the bending angle of the elbow joint (30°∼120°, R2 = 0.979) and recognize sliding gestures through differences in voltage waveforms. Additionally, it can drive commercial electronic devices and charge capacitors (4.7 µF capacitor charged to 4.5 V within 100 s). This study provides a scalable textile‐based solution for developing comfortable and durable self‐driven electronic skin, suitable for human‐computer interaction and health monitoring applications.
- Open Access
Preparation and Performance of a Novel ZnO/TM/PET Composite Negative Ion Functional Fiber
Using zinc oxide (ZnO), tourmaline (TM), and polyethylene terephthalate (PET) as main raw materials, a novel ZnO/TM/PET negative ion functional fiber was created. The rheological properties of a ZnO/TM/PET masterbatch were investigated; the morphology, XRD, and FT-IR of the fibers were observed; and the mechanical properties, thermal properties, and negative ion release properties of the new fiber were tested. The results showed that the average particle size of the ZnO/TM composite is nearly 365 nm, with an increase in negative ion emission efficiency by nearly 50% compared to the original TM. The apparent viscosity of fiber masterbatch decreases with the increase in the addition of the ZnO/TM composite, and the rheological properties of the PET fiber masterbatch are not significantly effected, still showing shear thinning characteristics when the amount of addition reaches 10%. The ZnO/TM composite disperses well in the interior and surface of the ZnO/TM/PET fiber matrix. The prepared ZnO/TM/PET fiber has excellent properties, such as fineness of 1.54 dtex, glass transition temperature of 122.4 °C, fracture strength of 3.31 cN/dtex, and negative ion release of 1640/cm3, which shows great industrialization potential.
Open AccessPreparation and Performance of a Novel ZnO/TM/PET Composite Negative Ion Functional Fiber
Using zinc oxide (ZnO), tourmaline (TM), and polyethylene terephthalate (PET) as main raw materials, a novel ZnO/TM/PET negative ion functional fiber was created. The rheological properties of a ZnO/TM/PET masterbatch were investigated; the morphology, XRD, and FT-IR of the fibers were observed; and the mechanical properties, thermal properties, and negative ion release properties of the new fiber were tested. The results showed that the average particle size of the ZnO/TM composite is nearly 365 nm, with an increase in negative ion emission efficiency by nearly 50% compared to the original TM. The apparent viscosity of fiber masterbatch decreases with the increase in the addition of the ZnO/TM composite, and the rheological properties of the PET fiber masterbatch are not significantly effected, still showing shear thinning characteristics when the amount of addition reaches 10%. The ZnO/TM composite disperses well in the interior and surface of the ZnO/TM/PET fiber matrix. The prepared ZnO/TM/PET fiber has excellent properties, such as fineness of 1.54 dtex, glass transition temperature of 122.4 °C, fracture strength of 3.31 cN/dtex, and negative ion release of 1640/cm3, which shows great industrialization potential.
- 4 November 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-4
PLSR Enhanced Ultra-Wide Measuring Range Fiber-Optic Curvature Sensor Based on Mode Switching Effect in Four Mode Fiber
A partial least squares regression (PLSR) enhanced ultra-wide measuring range fiber-optic curvature sensor based on mode switching effect in four-mode fiber is proposed and investigated. The curvature measuring range covers from 0 to 8 $\mathrm{m}^{-1}$ .- 4 November 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-4
PLSR Enhanced Ultra-Wide Measuring Range Fiber-Optic Curvature Sensor Based on Mode Switching Effect in Four Mode Fiber
A partial least squares regression (PLSR) enhanced ultra-wide measuring range fiber-optic curvature sensor based on mode switching effect in four-mode fiber is proposed and investigated. The curvature measuring range covers from 0 to 8 $\mathrm{m}^{-1}$ .- Open Access
- 24 January 2023
- Published by SAGE Publications in Journal of Industrial Textiles
- Vol. 53
Fe3O4/SiO2/polymer hybrid biosorbent based on an etch-fill strategy for heavy metal ion adsorption
Heavy metal contamination is a serious concern worldwide. In order to remove heavy metal ions from wastewater efficiently, multifunctinoal biomass-based material have been utilized. Herein, hyperbranched polymer modified cellulose biomass (HBP-CB) derived from textile waste materials ramie fibers was successfully developed by construction of Fe3O4/SiO2/polymer multiple structure through an etch-fill strategy. Specifically, Fe3O4 and SiO2 particles were introduced to the oxidation etching cellulose surface, and subsequently modified by hyperbranched polymer The adsorption behavior of the adsorbent toward two classes of heavy metal ions was investigated. The results indicated that HBP-CB owned excellent adsorption capacities for chromium and Cu(II) with maximum 123.5 mg/g and 149.0 mg/g and magnetic recovery performance in aqueous medium. These are owing to the oxidization etching biomass matrix with a higher BET surface area of 4.61 m2/g and the hybrid multiple structure modified by functional hyperbranched polymer with high dense adsorptive sites on the matrix. The adsorption behavior was well described by pseudo-second-order kinetic model and Langmuir isotherm model, revealing a rapid surface adsorption and monolayer spontaneous chemical adsorption. For recycling, 81% of adsorption capacity could be retained after five recovery cycles. These demonstrate that the hybrid multiple structure based on biomass, nanomaterials and polymer could provide sustainable and high-performance adsorption property for wastewater treatment.
- 24 January 2023
- Published by SAGE Publications in Journal of Industrial Textiles
- Vol. 53
Open AccessFe3O4/SiO2/polymer hybrid biosorbent based on an etch-fill strategy for heavy metal ion adsorption
Heavy metal contamination is a serious concern worldwide. In order to remove heavy metal ions from wastewater efficiently, multifunctinoal biomass-based material have been utilized. Herein, hyperbranched polymer modified cellulose biomass (HBP-CB) derived from textile waste materials ramie fibers was successfully developed by construction of Fe3O4/SiO2/polymer multiple structure through an etch-fill strategy. Specifically, Fe3O4 and SiO2 particles were introduced to the oxidation etching cellulose surface, and subsequently modified by hyperbranched polymer The adsorption behavior of the adsorbent toward two classes of heavy metal ions was investigated. The results indicated that HBP-CB owned excellent adsorption capacities for chromium and Cu(II) with maximum 123.5 mg/g and 149.0 mg/g and magnetic recovery performance in aqueous medium. These are owing to the oxidization etching biomass matrix with a higher BET surface area of 4.61 m2/g and the hybrid multiple structure modified by functional hyperbranched polymer with high dense adsorptive sites on the matrix. The adsorption behavior was well described by pseudo-second-order kinetic model and Langmuir isotherm model, revealing a rapid surface adsorption and monolayer spontaneous chemical adsorption. For recycling, 81% of adsorption capacity could be retained after five recovery cycles. These demonstrate that the hybrid multiple structure based on biomass, nanomaterials and polymer could provide sustainable and high-performance adsorption property for wastewater treatment.
- 23 February 2022
- Published by Elsevier in Biochemical Engineering Journal
- Vol. 181, 108379
New optimization approach for amphoteric/magnetic ramie biosorbent in dyestuff adsorption
- 23 February 2022
- Published by Elsevier in Biochemical Engineering Journal
- Vol. 181, 108379
New optimization approach for amphoteric/magnetic ramie biosorbent in dyestuff adsorption
- 17 July 2018
- Published by IOP Publishing in Materials Research Express
- Vol. 5 (8) , 085303
Spectral characteristics of Sr2ZnSi2O7:Eu2+,Dy3+/PAN spectrum-fingerprint anti-counterfeiting fiber
- 17 July 2018
- Published by IOP Publishing in Materials Research Express
- Vol. 5 (8) , 085303
Spectral characteristics of Sr2ZnSi2O7:Eu2+,Dy3+/PAN spectrum-fingerprint anti-counterfeiting fiber