Athanasia Gkogkou
Athanasia Gkogkou has a total of 65 co-authors. Here are the top co-authors by number of shared publications:
- Abhishek S. Maniyar
Department of Physics, Stanford University, 382 Via Pueblo Mall, Stanford, CA 94305, U.S.A.
2 shared publications Guilaine Lagache
2 shared publications- Guilaine Lagache
Aix Marseille Univ, CNRS, CNES, LAM (Laboratoire d’Astrophysique de Marseille)
2 shared publications - Jean Luc Starck
Université Paris-Saclay, Université Paris Cité, CEA, CNRS, AIM
2 shared publications - Marta Spinelli
Observatoire de la Côte d’Azur, Laboratoire Lagrange
2 shared publications - Matthieu Bethermin
Université de Strasbourg, CNRS, Observatoire Astronomique de Strasbourg, UMR 7550
2 shared publications
Latest Publications
- Open Access
- 4 November 2026
- Published by EDP Sciences in Astronomy & Astrophysics
- Vol. 715, A147
JESSNet: Joint dEconvolution and Sparse Separation Network for HI 21 cm foreground cleaning
Context. Foreground cleaning is one of the main challenges for H I 21 cm intensity mapping, here considered over the redshift range z ≃ 0.09 − 0.58, particularly in the presence of a chromatic instrumental beam that couples angular foreground structure into the frequency direction. This problem is further complicated by incomplete sky coverage, as expected for realistic Galactic masks and survey footprints. Aims. We introduce JESSNet, a beam-aware and mask-compatible foreground-cleaning framework designed to preserve the statistical properties of the H I signal in single-dish intensity mapping observations affected by frequency-dependent beam distortions and masked sky regions. Methods. JESSNet advances the joint deconvolution and blind source-separation framework of DecGMCA and SDecGMCA through three methodological extensions. First, while the original formulation uses a single effective mixing model over the angular range being cleaned, JESSNet operates in angular windows, with an effective mixing matrix and a channel selection adapted to each scale. Second, JESSNet replaces the fixed starlet thresholding step with a learned spherical-wavelet “learnlet” sparse regularization operator. Third, whereas the original spherical implementation assumes full-sky coverage, JESSNet constrains the source estimates to the observed sky region, making the method applicable to Galactic masks and survey footprints. We tested the method on simulated SKA-MID-like observations covering 900 − 1300 MHz, including H I emission, Galactic and extragalactic foregrounds, thermal noise, and an oscillating in frequency MeerKAT-inspired beam model. Results. The multiscale JESSNet reconstruction accurately recovers the angular and frequency power spectra of the input H I signal. Compared to applying JESSNet over a single angular range, the multiscale formulation significantly improves the reconstruction at low and intermediate angular scales and reduces residual beam-induced spectral features. The method also remains effective for a synthetic analysis footprint, preserving the H I power spectra under incomplete sky coverage. Conclusions. JESSNet provides a beam-aware, multiscale foreground-cleaning framework for H I intensity mapping. The code used to produce the analysis and results has been publicly released, allowing the community to reproduce the pipeline and adapt it to future simulations and real observations.
- 4 November 2026
- Published by EDP Sciences in Astronomy & Astrophysics
- Vol. 715, A147
Open AccessJESSNet: Joint dEconvolution and Sparse Separation Network for HI 21 cm foreground cleaning
Context. Foreground cleaning is one of the main challenges for H I 21 cm intensity mapping, here considered over the redshift range z ≃ 0.09 − 0.58, particularly in the presence of a chromatic instrumental beam that couples angular foreground structure into the frequency direction. This problem is further complicated by incomplete sky coverage, as expected for realistic Galactic masks and survey footprints. Aims. We introduce JESSNet, a beam-aware and mask-compatible foreground-cleaning framework designed to preserve the statistical properties of the H I signal in single-dish intensity mapping observations affected by frequency-dependent beam distortions and masked sky regions. Methods. JESSNet advances the joint deconvolution and blind source-separation framework of DecGMCA and SDecGMCA through three methodological extensions. First, while the original formulation uses a single effective mixing model over the angular range being cleaned, JESSNet operates in angular windows, with an effective mixing matrix and a channel selection adapted to each scale. Second, JESSNet replaces the fixed starlet thresholding step with a learned spherical-wavelet “learnlet” sparse regularization operator. Third, whereas the original spherical implementation assumes full-sky coverage, JESSNet constrains the source estimates to the observed sky region, making the method applicable to Galactic masks and survey footprints. We tested the method on simulated SKA-MID-like observations covering 900 − 1300 MHz, including H I emission, Galactic and extragalactic foregrounds, thermal noise, and an oscillating in frequency MeerKAT-inspired beam model. Results. The multiscale JESSNet reconstruction accurately recovers the angular and frequency power spectra of the input H I signal. Compared to applying JESSNet over a single angular range, the multiscale formulation significantly improves the reconstruction at low and intermediate angular scales and reduces residual beam-induced spectral features. The method also remains effective for a synthetic analysis footprint, preserving the H I power spectra under incomplete sky coverage. Conclusions. JESSNet provides a beam-aware, multiscale foreground-cleaning framework for H I intensity mapping. The code used to produce the analysis and results has been publicly released, allowing the community to reproduce the pipeline and adapt it to future simulations and real observations.
- 8 April 2026
- Published by Agence Bibliographique de l'Enseignement Supérieur
Intensity mapping from 2D to 3D : evaluating the feasibility of interpreting upcoming data
Cartographier les fluctuations de brillance des galaxies de la 2D à la 3D : faisabilité de l'interprétation des données à venir: L'étude de l’évolution de la densité du taux de formation d’étoiles (SFRD) dans les galaxies est un champ de recherche clé pour toutes les questions majeures en astrophysique et en cosmologie. Les relevés de galaxies ont été largement utilisés pour retracer l’histoire de la formation d’étoile des galaxies jusqu'à un décalage vers le rouge d'environ z ~ 11. Cependant, ces études ne parviennent pas à capturer l'information complète en raison de la présence de multiples galaxies peu lumineuses et indétectables, en particulier à des z élevés. Pour compléter les relevés traditionnels, la technique dite d’«Intensity Mapping» (IM) est apparue comme une approche intéressante. Elle consiste à mesurer la distribution spatiale de l'émission collective des raies spectrales des galaxies et du milieu intergalactique. Le projet CONCERTO, qui utilise un spectromètre fonctionnant dans la gamme de fréquences 120-310 GHz a pour but de mesurer les fluctuations d'intensité de la raie [CII] provenant de sources à z>5. Ces mesures visent à retracer la formation d'étoiles en exploitant la corrélation étroite entre la raie [CII] et le taux de formation d’étoile dans les galaxies. CONCERTO mesure également en avant-plan les fluctuations d'intensité de la raie CO à z<2.5. L'objectif de ma thèse comprenait deux aspects principaux. Je me suis tout d’abord concentrée sur le développement et la validation de la simulation SIDES (Simulated Infrared Dusty Extragalactic Sky), qui joue un rôle important dans l'étude de la faisabilité de la mesure et de l'extraction d'informations physiques à partir de cartes et de cubes d'intensité. SIDES combine un catalogue de halo de matière noire dérivé d'une simulation cosmologique à N-corps avec des relations empiriques pour attribuer aux galaxies diverses propriétés physiques, comme par exemple le taux de formation d’étoile, l'émission du continuum et l'émission des raies (sub-)millimétriques telles que [CII] et CO. J'ai combiné SIDES avec la simulation cosmologique à N-corps d'Uchuu, ce qui a permis d'obtenir une grande zone simulée d'environ 120 degrés carrés. Le spectre de puissance est un estimateur précieux et fréquemment utilisé qui nous permet d'extraire des informations physiques des données d’IM simulées ou observées. Il quantifie la probabilité de rencontrer une paire de galaxies à une distance de séparation spécifique. J’ai quantifié et modélisé l'impact de la variance champ-à-champ sur le spectre de puissance des raies de [CII] et CO obtenu par CONCERTO, et d’autres expériences d’IM. Cette variance est une limitation importante qui peut influencer les quantités physiques résultantes que nous cherchons à obtenir. Le deuxième objectif de ma thèse était d'étudier et de valider les modèles existants utilisés pour interpréter le spectre de puissance du fond diffus infrarouge (CIB) et des raies. Ces modèles, collectivement connus sous le nom de "modèle de halo", visent à caractériser les fluctuations des émissions à toutes les échelles. Bien que ces modèles aient démontré un certain succès dans l'analyse des données d'observation (par exemple, les fluctuations du CIB observées par le satellite Planck), leur validation est devenue cruciale, en particulier avant de les utiliser pour interpréter les spectres de puissance des raies. A cette fin, j'ai utilisé ces modèles pour analyser les données de la simulation SIDES-Uchuu et j'ai découvert un écart d'environ 20% entre les valeurs des paramètres attendues et retrouvées. Ce résultat met en évidence des faiblesses dans la capacité des modèles de halo à extraire des données physiques précises. Je discute des sources potentielles de ces faiblesses. Enfin, je présente l'étude d'un nouveau signal, précédemment négligé, qui est produit par la forte corrélation entre les fluctuations de l’intensité de la raie CO et les fluctuations du CIB, et qui est un avant-plan supplémentaire au signal kSZ déjà insaisissable
- 8 April 2026
- Published by Agence Bibliographique de l'Enseignement Supérieur
Intensity mapping from 2D to 3D : evaluating the feasibility of interpreting upcoming data
Cartographier les fluctuations de brillance des galaxies de la 2D à la 3D : faisabilité de l'interprétation des données à venir: L'étude de l’évolution de la densité du taux de formation d’étoiles (SFRD) dans les galaxies est un champ de recherche clé pour toutes les questions majeures en astrophysique et en cosmologie. Les relevés de galaxies ont été largement utilisés pour retracer l’histoire de la formation d’étoile des galaxies jusqu'à un décalage vers le rouge d'environ z ~ 11. Cependant, ces études ne parviennent pas à capturer l'information complète en raison de la présence de multiples galaxies peu lumineuses et indétectables, en particulier à des z élevés. Pour compléter les relevés traditionnels, la technique dite d’«Intensity Mapping» (IM) est apparue comme une approche intéressante. Elle consiste à mesurer la distribution spatiale de l'émission collective des raies spectrales des galaxies et du milieu intergalactique. Le projet CONCERTO, qui utilise un spectromètre fonctionnant dans la gamme de fréquences 120-310 GHz a pour but de mesurer les fluctuations d'intensité de la raie [CII] provenant de sources à z>5. Ces mesures visent à retracer la formation d'étoiles en exploitant la corrélation étroite entre la raie [CII] et le taux de formation d’étoile dans les galaxies. CONCERTO mesure également en avant-plan les fluctuations d'intensité de la raie CO à z<2.5. L'objectif de ma thèse comprenait deux aspects principaux. Je me suis tout d’abord concentrée sur le développement et la validation de la simulation SIDES (Simulated Infrared Dusty Extragalactic Sky), qui joue un rôle important dans l'étude de la faisabilité de la mesure et de l'extraction d'informations physiques à partir de cartes et de cubes d'intensité. SIDES combine un catalogue de halo de matière noire dérivé d'une simulation cosmologique à N-corps avec des relations empiriques pour attribuer aux galaxies diverses propriétés physiques, comme par exemple le taux de formation d’étoile, l'émission du continuum et l'émission des raies (sub-)millimétriques telles que [CII] et CO. J'ai combiné SIDES avec la simulation cosmologique à N-corps d'Uchuu, ce qui a permis d'obtenir une grande zone simulée d'environ 120 degrés carrés. Le spectre de puissance est un estimateur précieux et fréquemment utilisé qui nous permet d'extraire des informations physiques des données d’IM simulées ou observées. Il quantifie la probabilité de rencontrer une paire de galaxies à une distance de séparation spécifique. J’ai quantifié et modélisé l'impact de la variance champ-à-champ sur le spectre de puissance des raies de [CII] et CO obtenu par CONCERTO, et d’autres expériences d’IM. Cette variance est une limitation importante qui peut influencer les quantités physiques résultantes que nous cherchons à obtenir. Le deuxième objectif de ma thèse était d'étudier et de valider les modèles existants utilisés pour interpréter le spectre de puissance du fond diffus infrarouge (CIB) et des raies. Ces modèles, collectivement connus sous le nom de "modèle de halo", visent à caractériser les fluctuations des émissions à toutes les échelles. Bien que ces modèles aient démontré un certain succès dans l'analyse des données d'observation (par exemple, les fluctuations du CIB observées par le satellite Planck), leur validation est devenue cruciale, en particulier avant de les utiliser pour interpréter les spectres de puissance des raies. A cette fin, j'ai utilisé ces modèles pour analyser les données de la simulation SIDES-Uchuu et j'ai découvert un écart d'environ 20% entre les valeurs des paramètres attendues et retrouvées. Ce résultat met en évidence des faiblesses dans la capacité des modèles de halo à extraire des données physiques précises. Je discute des sources potentielles de ces faiblesses. Enfin, je présente l'étude d'un nouveau signal, précédemment négligé, qui est produit par la forte corrélation entre les fluctuations de l’intensité de la raie CO et les fluctuations du CIB, et qui est un avant-plan supplémentaire au signal kSZ déjà insaisissable
- Open Access
- 27 January 2026
- Published by EDP Sciences in Astronomy & Astrophysics
- Vol. 706, A3
Foreground removal in HI 21 cm intensity mapping under frequency-dependent beam distortions
Context. Neutral hydrogen (HI) intensity mapping with single-dish experiments is a powerful approach for probing cosmology in the post-reionization epoch. It is challenging to extract it, however, because of the bright foregrounds, which are stronger than the HI signal by more than four orders of magnitude. While all methods perform well when a Gaussian beam is assumed that is degraded to the lowest resolution, most methods degrade significantly in a more realistic beam model. Aims. The complexity introduced by frequency-dependent beam effects means that we need methods that explicitly account for the instrument response. We investigate the performance of SDecGMCA. This method extends DecGMCA to spherical data by combining sparse component separation with beam deconvolution. Our goal is to evaluate this method in comparison with established foreground removal techniques by assessing its ability to recover the cosmological HI signal from single-dish intensity mapping observations under varying beam conditions. Methods. We used simulated HI signals and foregrounds informed by existing observational and theoretical models that cover the frequency ranges relevant to MeerKAT and SKA-Mid. The foreground removal techniques we tested fall into two main categories: model-fitting methods (polynomial and parametric), and blind source separation methods (PCA, ICA, GMCA, and SDecGMCA). Their effectiveness was evaluated based on the recovery of the HI angular and frequency power spectra under progressively more realistic beam conditions. Results. While all methods performed adequately under a uniform degraded beam, SDecGMCA remained robust when frequency-dependent beam distortions were introduced. For an oscillating beam, SDecGMCA suppressed the spurious spectral peak at k ν ∼ 0.3 and achieved an accuracy of ≲5% at intermediate angular scales (10 < ℓ < 200); it outperformed other methods. Furthermore, the masking of bright Galactic regions significantly improved the recovery of the HI signal, in particular, for SDecGMCA, which benefited most when contaminated lines of sight were excluded. The beam inversion, however, remained intrinsically unstable beyond ℓ ∼ 200. This sets a practical limit on the method. Conclusions. Our findings highlight the limitations of simple fitting and standard blind source separation methods for realistic beam effects, and they establish SDecGMCA as a particularly promising approach for future single-dish intensity mapping surveys. Its robustness for various beam models, combined with the improvements that can be achieved through masking strategies and forthcoming refinements to its thresholding scheme, suggest that SDecGMCA might provide reliable spherical harmonics reconstructions of the HI power spectrum in upcoming experiments.
- 27 January 2026
- Published by EDP Sciences in Astronomy & Astrophysics
- Vol. 706, A3
Open AccessForeground removal in HI 21 cm intensity mapping under frequency-dependent beam distortions
Context. Neutral hydrogen (HI) intensity mapping with single-dish experiments is a powerful approach for probing cosmology in the post-reionization epoch. It is challenging to extract it, however, because of the bright foregrounds, which are stronger than the HI signal by more than four orders of magnitude. While all methods perform well when a Gaussian beam is assumed that is degraded to the lowest resolution, most methods degrade significantly in a more realistic beam model. Aims. The complexity introduced by frequency-dependent beam effects means that we need methods that explicitly account for the instrument response. We investigate the performance of SDecGMCA. This method extends DecGMCA to spherical data by combining sparse component separation with beam deconvolution. Our goal is to evaluate this method in comparison with established foreground removal techniques by assessing its ability to recover the cosmological HI signal from single-dish intensity mapping observations under varying beam conditions. Methods. We used simulated HI signals and foregrounds informed by existing observational and theoretical models that cover the frequency ranges relevant to MeerKAT and SKA-Mid. The foreground removal techniques we tested fall into two main categories: model-fitting methods (polynomial and parametric), and blind source separation methods (PCA, ICA, GMCA, and SDecGMCA). Their effectiveness was evaluated based on the recovery of the HI angular and frequency power spectra under progressively more realistic beam conditions. Results. While all methods performed adequately under a uniform degraded beam, SDecGMCA remained robust when frequency-dependent beam distortions were introduced. For an oscillating beam, SDecGMCA suppressed the spurious spectral peak at k ν ∼ 0.3 and achieved an accuracy of ≲5% at intermediate angular scales (10 < ℓ < 200); it outperformed other methods. Furthermore, the masking of bright Galactic regions significantly improved the recovery of the HI signal, in particular, for SDecGMCA, which benefited most when contaminated lines of sight were excluded. The beam inversion, however, remained intrinsically unstable beyond ℓ ∼ 200. This sets a practical limit on the method. Conclusions. Our findings highlight the limitations of simple fitting and standard blind source separation methods for realistic beam effects, and they establish SDecGMCA as a particularly promising approach for future single-dish intensity mapping surveys. Its robustness for various beam models, combined with the improvements that can be achieved through masking strategies and forthcoming refinements to its thresholding scheme, suggest that SDecGMCA might provide reliable spherical harmonics reconstructions of the HI power spectrum in upcoming experiments.
- Open Access
- 14 November 2025
- Published by EDP Sciences in Astronomy & Astrophysics
- Vol. 703, A149
Challenges of standard halo models in constraining galaxy properties from cosmic infrared background anisotropies
The halo model, combined with halo occupation distribution (HOD) prescriptions, is widely used to interpret cosmic infrared background (CIB) anisotropies and extract physical information about star-forming galaxies and their connection to large-scale structures. Recent CIB-specific implementations of the halo model have adopted more physical parameterizations. However, the extent to which these models can reliably recover meaningful physical parameters remains uncertain. We assessed whether the current parameterization of CIB halo models is sufficient to recover astrophysical quantities, such as star formation efficiency, η ( M h , z ), and halo mass at which the peak of star formation efficiency occurs, M max , when fit to mock data. We also assessed whether discrepancies arise from assumptions about galaxy emission (the HOD ingredients) or from more fundamental components in the halo model, such as bias and matter clustering. We fit the M21 CIB HOD model, implemented within the halo model framework, to mock CIB power spectra and star formation rate density (SFRD) data generated from the SIDES-Uchuu simulation, and compared the best-fit parameters to the known simulation inputs. We then repeated the analysis using a simplified version of the simulation (SSU), explicitly designed to match the HOD assumptions. A detailed comparison of model and simulation outputs was carried out to trace the origin of observed discrepancies. While the M21 HOD model provides a good fit to the mock data, it failed to recover the intrinsic parameters accurately, particularly the halo mass at which star formation efficiency peaks. This mismatch persists even when fitting data generated with the same model assumptions. We find strong agreement (within 5%) in the emission-related components (SFRD, emissivity), but observe a scale- and redshift-dependent offset exceeding 20% in the two-halo term of the CIB power spectrum. This likely arises from limitations in the treatment of halo bias and matter clustering within the linear approximation. Additionally, incorporating scatter in the SFR–halo mass relation and the spectral energy distribution (SED) templates significantly affects the shot noise (∼50%), but has only a modest impact (less than 10%) on the clustered component. These results suggest that recovering physical parameters from CIB clustering requires improvements to the cosmological ingredients of the halo model framework, such as adopting scale-dependent halo bias and nonlinear matter power spectra in addition to careful modeling of emission physics.
- 14 November 2025
- Published by EDP Sciences in Astronomy & Astrophysics
- Vol. 703, A149
Open AccessChallenges of standard halo models in constraining galaxy properties from cosmic infrared background anisotropies
The halo model, combined with halo occupation distribution (HOD) prescriptions, is widely used to interpret cosmic infrared background (CIB) anisotropies and extract physical information about star-forming galaxies and their connection to large-scale structures. Recent CIB-specific implementations of the halo model have adopted more physical parameterizations. However, the extent to which these models can reliably recover meaningful physical parameters remains uncertain. We assessed whether the current parameterization of CIB halo models is sufficient to recover astrophysical quantities, such as star formation efficiency, η ( M h , z ), and halo mass at which the peak of star formation efficiency occurs, M max , when fit to mock data. We also assessed whether discrepancies arise from assumptions about galaxy emission (the HOD ingredients) or from more fundamental components in the halo model, such as bias and matter clustering. We fit the M21 CIB HOD model, implemented within the halo model framework, to mock CIB power spectra and star formation rate density (SFRD) data generated from the SIDES-Uchuu simulation, and compared the best-fit parameters to the known simulation inputs. We then repeated the analysis using a simplified version of the simulation (SSU), explicitly designed to match the HOD assumptions. A detailed comparison of model and simulation outputs was carried out to trace the origin of observed discrepancies. While the M21 HOD model provides a good fit to the mock data, it failed to recover the intrinsic parameters accurately, particularly the halo mass at which star formation efficiency peaks. This mismatch persists even when fitting data generated with the same model assumptions. We find strong agreement (within 5%) in the emission-related components (SFRD, emissivity), but observe a scale- and redshift-dependent offset exceeding 20% in the two-halo term of the CIB power spectrum. This likely arises from limitations in the treatment of halo bias and matter clustering within the linear approximation. Additionally, incorporating scatter in the SFR–halo mass relation and the spectral energy distribution (SED) templates significantly affects the shot noise (∼50%), but has only a modest impact (less than 10%) on the clustered component. These results suggest that recovering physical parameters from CIB clustering requires improvements to the cosmological ingredients of the halo model framework, such as adopting scale-dependent halo bias and nonlinear matter power spectra in addition to careful modeling of emission physics.
- Open Access
- 30 April 2024
- Published by EDP Sciences in Astronomy & Astrophysics
- Vol. 685, A1
A3COSMOS and A3GOODSS: Continuum source catalogues and multi-band number counts
Context. Galaxy submillimetre number counts are a fundamental measurement in our understanding of galaxy evolution models. Most early measurements are obtained via single-dish telescopes with substantial source confusion, whereas recent interferometric observations are limited to small areas. Aims. We used a large database of ALMA continuum observations to accurately measure galaxy number counts in multiple (sub)millimetre bands, thus bridging the flux density range between single-dish surveys and deep interferometric studies. Methods. We continued the Automated Mining of the ALMA Archive in the COSMOS Field project (A3COSMOS) and extended it with observations from the GOODS-South field (A3GOODSS). The database consists of ∼4000 pipeline-processed continuum images from the public ALMA archive, yielding 2050 unique detected sources, including sources with and without a known optical counterpart. To infer galaxy number counts, we constructed a method to reduce the observational bias inherent to targeted pointings that dominate the database. This method comprises a combination of image selection, masking, and source weighting. The effective area was calculated by accounting for inhomogeneous wavelengths, sensitivities, and resolutions and for the spatial overlap between images. We tested and calibrated our method with simulations. Results. We derived the number counts in a consistent and homogeneous way in four different ALMA bands covering a relatively large area. The results are consistent with number counts retrieved from the literature within the uncertainties. In Band 7, at the depth of the inferred number counts, ∼40% of the cosmic infrared background is resolved into discrete sources. This fraction, however, decreases with increasing wavelength, reaching ∼4% in Band 3. Finally, we used the number counts to test models of dusty galaxy evolution, and find a good agreement within the uncertainties. Conclusions. By continuing the A3COSMOS and A3GOODSS archival effort, we obtained the deepest archive-based (sub)millimetre number counts measured to date over such a wide area. This database proves to be a valuable resource that, thanks to its substantial size, can be used for statistical analyses after having applied certain conservative restrictions.
- 30 April 2024
- Published by EDP Sciences in Astronomy & Astrophysics
- Vol. 685, A1
Open AccessA3COSMOS and A3GOODSS: Continuum source catalogues and multi-band number counts
Context. Galaxy submillimetre number counts are a fundamental measurement in our understanding of galaxy evolution models. Most early measurements are obtained via single-dish telescopes with substantial source confusion, whereas recent interferometric observations are limited to small areas. Aims. We used a large database of ALMA continuum observations to accurately measure galaxy number counts in multiple (sub)millimetre bands, thus bridging the flux density range between single-dish surveys and deep interferometric studies. Methods. We continued the Automated Mining of the ALMA Archive in the COSMOS Field project (A3COSMOS) and extended it with observations from the GOODS-South field (A3GOODSS). The database consists of ∼4000 pipeline-processed continuum images from the public ALMA archive, yielding 2050 unique detected sources, including sources with and without a known optical counterpart. To infer galaxy number counts, we constructed a method to reduce the observational bias inherent to targeted pointings that dominate the database. This method comprises a combination of image selection, masking, and source weighting. The effective area was calculated by accounting for inhomogeneous wavelengths, sensitivities, and resolutions and for the spatial overlap between images. We tested and calibrated our method with simulations. Results. We derived the number counts in a consistent and homogeneous way in four different ALMA bands covering a relatively large area. The results are consistent with number counts retrieved from the literature within the uncertainties. In Band 7, at the depth of the inferred number counts, ∼40% of the cosmic infrared background is resolved into discrete sources. This fraction, however, decreases with increasing wavelength, reaching ∼4% in Band 3. Finally, we used the number counts to test models of dusty galaxy evolution, and find a good agreement within the uncertainties. Conclusions. By continuing the A3COSMOS and A3GOODSS archival effort, we obtained the deepest archive-based (sub)millimetre number counts measured to date over such a wide area. This database proves to be a valuable resource that, thanks to its substantial size, can be used for statistical analyses after having applied certain conservative restrictions.
- Open Access
- 20 December 2023
- Published by EDP Sciences in Astronomy & Astrophysics
- Vol. 681, A1
Separation of dust emission from the cosmic infrared background in Herschel observations with wavelet phase harmonics
The low-brightness dust emission at high Galactic latitudes is of interest with respect to studying the interplay among the physical processes involved in shaping the structure of the interstellar medium (ISM), as well as in statistical characterizations of the dust emission as a foreground to the cosmic microwave background (CMB). Progress in this avenue of research has been hampered by the difficulty related to separating the dust emission from the cosmic infrared background (CIB). We demonstrate that the dust and CIB may be effectively separated based on their different structure on the sky and we use the separation to characterize the structure of diffuse dust emission on angular scales, where the CIB is a significant component in terms of power. We used scattering transform statistics, wavelet phase harmonics (WPH) to perform a statistical component separation using Herschel SPIRE observations. This component separation is done only from observational data using non-Gaussian properties as a lever arm and is done at a single 250 µm frequency. This method, which we validated on mock data, gives us access to non-Gaussian statistics of the interstellar dust and an output dust map that is essentially free from CIB contamination. Our statistical modeling characterizes the non-Gaussian structure of the diffuse ISM down to the smallest scales observed by Herschel. We recovered the power law shape of the dust power spectrum up to k = 2 arcmin−1, where the dust signal represents 2% of the total power. Going beyond the standard power spectra analysis, we show that the non-Gaussian properties of the dust emission are not scale-invariant. The output dust map reveals coherent structures at the smallest scales, which had been hidden by the CIB anisotropies. This aspect opens up new observational perspectives on the formation of structure in the diffuse ISM, which we discuss here in reference to a previous work. We have succeeded in performing a statistical separation from the observational data at a single frequency by using non-Gaussian statistics.
- 20 December 2023
- Published by EDP Sciences in Astronomy & Astrophysics
- Vol. 681, A1
Open AccessSeparation of dust emission from the cosmic infrared background in Herschel observations with wavelet phase harmonics
The low-brightness dust emission at high Galactic latitudes is of interest with respect to studying the interplay among the physical processes involved in shaping the structure of the interstellar medium (ISM), as well as in statistical characterizations of the dust emission as a foreground to the cosmic microwave background (CMB). Progress in this avenue of research has been hampered by the difficulty related to separating the dust emission from the cosmic infrared background (CIB). We demonstrate that the dust and CIB may be effectively separated based on their different structure on the sky and we use the separation to characterize the structure of diffuse dust emission on angular scales, where the CIB is a significant component in terms of power. We used scattering transform statistics, wavelet phase harmonics (WPH) to perform a statistical component separation using Herschel SPIRE observations. This component separation is done only from observational data using non-Gaussian properties as a lever arm and is done at a single 250 µm frequency. This method, which we validated on mock data, gives us access to non-Gaussian statistics of the interstellar dust and an output dust map that is essentially free from CIB contamination. Our statistical modeling characterizes the non-Gaussian structure of the diffuse ISM down to the smallest scales observed by Herschel. We recovered the power law shape of the dust power spectrum up to k = 2 arcmin−1, where the dust signal represents 2% of the total power. Going beyond the standard power spectra analysis, we show that the non-Gaussian properties of the dust emission are not scale-invariant. The output dust map reveals coherent structures at the smallest scales, which had been hidden by the CIB anisotropies. This aspect opens up new observational perspectives on the formation of structure in the diffuse ISM, which we discuss here in reference to a previous work. We have succeeded in performing a statistical separation from the observational data at a single frequency by using non-Gaussian statistics.
- Open Access
- 29 November 2023
- Published by EDP Sciences in Astronomy & Astrophysics
- Vol. 679, A115
A plausible link between dynamically unsettled molecular gas and the radio jet in NGC 6328
We report the detection of outflowing molecular gas at the center of the nearby radio galaxy NGC6328 (z = 0.014), which has a gigahertz-peaked spectrum radio core and a compact (2 pc) young double radio lobe tracing jet. Utilizing Atacama Large Millimeter/submillimeter Array (ALMA) CO(3 − 2) and CO(2 − 1) observations, as well as a novel code developed to fit the 3D gas distribution and kinematics, to study the molecular gas kinematics, we find that the bulk of the gas is situated within a highly warped disk structure, most likely the result of a past merger event. Our analysis further uncovers, within the inner regions of the gas distribution (R < 300 pc) and at a position angle aligning with that of the radio jet (150°), the existence of two anti-diametric molecular gas structures kinematically detached from the main disk. These structures most likely trace a jet-induced cold gas outflow with a total lower limit mass of 2 × 106 M⊙ mass, corresponding to an outflow rate of 2 M⊙ yr−1 and a kinetic power of 2.7 × 1040 erg s−1. The energy required to maintain such a molecular outflow is aligned with the mechanical power of the jet.
- 29 November 2023
- Published by EDP Sciences in Astronomy & Astrophysics
- Vol. 679, A115
Open AccessA plausible link between dynamically unsettled molecular gas and the radio jet in NGC 6328
We report the detection of outflowing molecular gas at the center of the nearby radio galaxy NGC6328 (z = 0.014), which has a gigahertz-peaked spectrum radio core and a compact (2 pc) young double radio lobe tracing jet. Utilizing Atacama Large Millimeter/submillimeter Array (ALMA) CO(3 − 2) and CO(2 − 1) observations, as well as a novel code developed to fit the 3D gas distribution and kinematics, to study the molecular gas kinematics, we find that the bulk of the gas is situated within a highly warped disk structure, most likely the result of a past merger event. Our analysis further uncovers, within the inner regions of the gas distribution (R < 300 pc) and at a position angle aligning with that of the radio jet (150°), the existence of two anti-diametric molecular gas structures kinematically detached from the main disk. These structures most likely trace a jet-induced cold gas outflow with a total lower limit mass of 2 × 106 M⊙ mass, corresponding to an outflow rate of 2 M⊙ yr−1 and a kinetic power of 2.7 × 1040 erg s−1. The energy required to maintain such a molecular outflow is aligned with the mechanical power of the jet.
- 7 June 2023
- Published by American Physical Society (APS) in Physical Review D
- Vol. 107 (12) , 123504
Extragalactic CO emission lines in the CMB experiments: A forgotten signal and a foreground
High resolution cosmic microwave background (CMB) experiments have allowed us to precisely measure the CMB temperature power spectrum down to very small scales (multipole ). Such measurements at multiple frequencies enable separating the power spectrum of the primary CMB anisotropies with the power spectrum of other signals like CMB lensing, thermal and kinematic Sunyaev-Zel’dovich effects (tSZ and kSZ), and cosmic infrared background (CIB). In this paper, we explore another signal of interest at these frequencies that should be present in the CMB maps: extragalactic CO molecular rotational line emissions, which are the most widely used tracers of molecular gas in the line intensity mapping experiments. Using the SIDES simulations adopted for top hat bandpasses at 150 and 220 GHz, we show that the cross-correlation of the CIB with CO lines has a contribution similar to the CIB-tSZ correlation and the kSZ power, thereby contributing a non-negligible amount to the total power at these scales. This signal, therefore, may significantly impact the recently reported detection of the kSZ power spectrum from the South Pole Telescope collaboration, as the contribution of the CO lines is not considered in such analyses. Our results also provide a new way of measuring the CO power spectrum in cross-correlation with the CIB. Finally, these results show that the CO emissions present in the CMB maps will have to be accounted for in all the CMB auto-power spectrum and cross-correlation studies involving a large-scale structure tracer.- 7 June 2023
- Published by American Physical Society (APS) in Physical Review D
- Vol. 107 (12) , 123504
Extragalactic CO emission lines in the CMB experiments: A forgotten signal and a foreground
High resolution cosmic microwave background (CMB) experiments have allowed us to precisely measure the CMB temperature power spectrum down to very small scales (multipole ). Such measurements at multiple frequencies enable separating the power spectrum of the primary CMB anisotropies with the power spectrum of other signals like CMB lensing, thermal and kinematic Sunyaev-Zel’dovich effects (tSZ and kSZ), and cosmic infrared background (CIB). In this paper, we explore another signal of interest at these frequencies that should be present in the CMB maps: extragalactic CO molecular rotational line emissions, which are the most widely used tracers of molecular gas in the line intensity mapping experiments. Using the SIDES simulations adopted for top hat bandpasses at 150 and 220 GHz, we show that the cross-correlation of the CIB with CO lines has a contribution similar to the CIB-tSZ correlation and the kSZ power, thereby contributing a non-negligible amount to the total power at these scales. This signal, therefore, may significantly impact the recently reported detection of the kSZ power spectrum from the South Pole Telescope collaboration, as the contribution of the CO lines is not considered in such analyses. Our results also provide a new way of measuring the CO power spectrum in cross-correlation with the CIB. Finally, these results show that the CO emissions present in the CMB maps will have to be accounted for in all the CMB auto-power spectrum and cross-correlation studies involving a large-scale structure tracer.- Open Access
- 27 January 2023
- Published by EDP Sciences in Astronomy & Astrophysics
- Vol. 670, A16
CONCERTO: Simulating the CO, [CII], and [CI] line emission of galaxies in a 117 deg2 field and the impact of field-to-field variance
In the submillimeter regime, spectral line scans and line intensity mapping (LIM) are new promising probes for the cold gas content and star formation rate of galaxies across cosmic time. However, both of these two measurements suffer from field-to-field variance. We study the effect of field-to-field variance on the predicted CO and [CII] power spectra from future LIM experiments such as CONCERTO, as well as on the line luminosity functions (LFs) and the cosmic molecular gas mass density that are currently derived from spectral line scans. We combined a 117 deg2 dark matter lightcone from the Uchuu cosmological simulation with the simulated infrared dusty extragalactic sky (SIDES) approach. The clustering of the dusty galaxies in the SIDES-Uchuu product is validated by reproducing the cosmic infrared background anisotropies measured by Herschel and Planck. We find that in order to constrain the CO LF with an uncertainty below 20%, we need survey sizes of at least 0.1 deg2. Furthermore, accounting for the field-to-field variance using only the Poisson variance can underestimate the total variance by up to 80%. The lower the luminosity is and the larger the survey size is, the higher the level of underestimate. At z < 3, the impact of field-to-field variance on the cosmic molecular gas density can be as high as 40% for the 4.6 arcmin2 field, but drops below 10% for areas larger than 0.2 deg2. However, at z > 3 the variance decreases more slowly with survey size and for example drops below 10% for 1 deg2 fields. Finally, we find that the CO and [CII] LIM power spectra can vary by up to 50% in 1 deg2 fields. This limits the accuracy of the constraints provided by the first 1 deg2 surveys. In addition the level of the shot noise power is always dominated by the sources that are just below the detection thresholds, which limits its potential for deriving number densities of faint [CII] emitters. We provide an analytical formula to estimate the field-to-field variance of current or future LIM experiments given their observed frequency and survey size. The underlying code to derive the field-to-field variance and the full SIDES-Uchuu products (catalogs, cubes, and maps) are publicly available.
- 27 January 2023
- Published by EDP Sciences in Astronomy & Astrophysics
- Vol. 670, A16
Open AccessCONCERTO: Simulating the CO, [CII], and [CI] line emission of galaxies in a 117 deg2 field and the impact of field-to-field variance
In the submillimeter regime, spectral line scans and line intensity mapping (LIM) are new promising probes for the cold gas content and star formation rate of galaxies across cosmic time. However, both of these two measurements suffer from field-to-field variance. We study the effect of field-to-field variance on the predicted CO and [CII] power spectra from future LIM experiments such as CONCERTO, as well as on the line luminosity functions (LFs) and the cosmic molecular gas mass density that are currently derived from spectral line scans. We combined a 117 deg2 dark matter lightcone from the Uchuu cosmological simulation with the simulated infrared dusty extragalactic sky (SIDES) approach. The clustering of the dusty galaxies in the SIDES-Uchuu product is validated by reproducing the cosmic infrared background anisotropies measured by Herschel and Planck. We find that in order to constrain the CO LF with an uncertainty below 20%, we need survey sizes of at least 0.1 deg2. Furthermore, accounting for the field-to-field variance using only the Poisson variance can underestimate the total variance by up to 80%. The lower the luminosity is and the larger the survey size is, the higher the level of underestimate. At z < 3, the impact of field-to-field variance on the cosmic molecular gas density can be as high as 40% for the 4.6 arcmin2 field, but drops below 10% for areas larger than 0.2 deg2. However, at z > 3 the variance decreases more slowly with survey size and for example drops below 10% for 1 deg2 fields. Finally, we find that the CO and [CII] LIM power spectra can vary by up to 50% in 1 deg2 fields. This limits the accuracy of the constraints provided by the first 1 deg2 surveys. In addition the level of the shot noise power is always dominated by the sources that are just below the detection thresholds, which limits its potential for deriving number densities of faint [CII] emitters. We provide an analytical formula to estimate the field-to-field variance of current or future LIM experiments given their observed frequency and survey size. The underlying code to derive the field-to-field variance and the full SIDES-Uchuu products (catalogs, cubes, and maps) are publicly available.