Marco Sebastiano Nicolò
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Marco Sebastiano Nicolò has a total of 29 co-authors. Here are the top co-authors by number of shared publications:
- Vincenzo Zammuto
Department of Chemical, Biological, Pharmaceutical and Environmental Sciences, University of Messina, 98166 Messina, Italy
6 shared publications - Concetta Gugliandolo
Department of Chemical, Biological, Pharmaceutical and Environmental Sciences, University of Messina, Messina, Italy
5 shared publications - Angela Macrì
Department of Chemical, Biological, Pharmaceutical and Environmental Sciences, University of Messina, Messina, Italy
4 shared publications - Eleonora Agostino
Department of Chemical, Biological, Pharmaceutical and Environmental Sciences, University of Messina, Viale Ferdinando Stagno d’Alcontres 31, 98166 Messina, Italy
4 shared publications - Antonio Spanò
Department of Chemical, Biological, Pharmaceutical and Environmental Sciences, University of Messina, Viale Ferdinando Stagno d’Alcontres 31, 98166 Messina, Italy
3 shared publications - Clara Urzì
Department of Chemical, Biological, Pharmaceutical and Environmental Sciences, University of Messina, 98166 Messina, Italy
2 shared publications
Latest Publications
- Open Access
Antifouling Performance and Long-Term Efficiency of a Zwitterionic Sulfobetaine-Hydroxyethyl-Containing Polymethylmethacrylate Ter-Co-Polymer Coating Against Biomass-Producing Photosynthetic Strains
The antifouling performance of a zwitterionic sulfobetaine-hydroxyethyl-containing polymethylmethacrylate ter-co-polymer (PSBM) is evaluated against three photosynthetic strains, namely Chlorella sp., Nannochloropsis sp., and Arthrospira maxima. PSBM-coated polymethylmethacrylate (PMMA) surfaces displayed a significantly reduced propensity for biofilm formation compared to rough and untreated controls, leaving clean surfaces after 7 days of exposure. A tribological approach was adopted to estimate the long-term durability of the PSBM coating. Repeated cycles of exposure to Chlorella sp., Nannochloropsis sp., and A. maxima biomass subject the coating to stress and continuous biofilm challenges. After several cycles, the PSBM coating maintains a higher antifouling efficacy than the untreated PMMA surface, suggesting stability and high potential in photobioreactor applications.
Open AccessAntifouling Performance and Long-Term Efficiency of a Zwitterionic Sulfobetaine-Hydroxyethyl-Containing Polymethylmethacrylate Ter-Co-Polymer Coating Against Biomass-Producing Photosynthetic Strains
The antifouling performance of a zwitterionic sulfobetaine-hydroxyethyl-containing polymethylmethacrylate ter-co-polymer (PSBM) is evaluated against three photosynthetic strains, namely Chlorella sp., Nannochloropsis sp., and Arthrospira maxima. PSBM-coated polymethylmethacrylate (PMMA) surfaces displayed a significantly reduced propensity for biofilm formation compared to rough and untreated controls, leaving clean surfaces after 7 days of exposure. A tribological approach was adopted to estimate the long-term durability of the PSBM coating. Repeated cycles of exposure to Chlorella sp., Nannochloropsis sp., and A. maxima biomass subject the coating to stress and continuous biofilm challenges. After several cycles, the PSBM coating maintains a higher antifouling efficacy than the untreated PMMA surface, suggesting stability and high potential in photobioreactor applications.
- Open Access
- 17 March 2025
- Published by MDPI AG in Preprints.org
Antifouling Performance and Long-Term Efficiency of a Zwitterionic Sulfobetaine-Hydroxyethyl Containing-Polymethylmethacrylate Ter-Co-Polymer Coating Against Biomass Producing Photosynthetic Strains
The antifouling performance of a zwitterionic Sulfobetaine-Hydroxyethyl containing-Polymethylmethacrylate ter-co-polymer (PSBM) is evaluated against three photosynthetic strains, namely Chlorella sp., Nannochloropsis sp., and Arthrospira maxima. PSBM coated polymethylmethacrylate (PMMA) surfaces displayed significantly reduced propensity for biofilm formation, compared to rough and untreated controls, leaving clean surfaces after 7 days of exposure. A tribological approach was adopted to estimate the long-term durability of the PSBM coating. Repeated cycles of exposure to Chlorella sp., Nannochloropsis sp., and A. maxima biomass subject the coating to stress and continuous biofilm challenge. After several cycles, the PSBM coating maintains a higher antifouling efficacy than untreated PMMA surfaces, suggesting stability and high potential in Photobioreactors application.
- 17 March 2025
- Published by MDPI AG in Preprints.org
Open AccessAntifouling Performance and Long-Term Efficiency of a Zwitterionic Sulfobetaine-Hydroxyethyl Containing-Polymethylmethacrylate Ter-Co-Polymer Coating Against Biomass Producing Photosynthetic Strains
The antifouling performance of a zwitterionic Sulfobetaine-Hydroxyethyl containing-Polymethylmethacrylate ter-co-polymer (PSBM) is evaluated against three photosynthetic strains, namely Chlorella sp., Nannochloropsis sp., and Arthrospira maxima. PSBM coated polymethylmethacrylate (PMMA) surfaces displayed significantly reduced propensity for biofilm formation, compared to rough and untreated controls, leaving clean surfaces after 7 days of exposure. A tribological approach was adopted to estimate the long-term durability of the PSBM coating. Repeated cycles of exposure to Chlorella sp., Nannochloropsis sp., and A. maxima biomass subject the coating to stress and continuous biofilm challenge. After several cycles, the PSBM coating maintains a higher antifouling efficacy than untreated PMMA surfaces, suggesting stability and high potential in Photobioreactors application.
- Open Access
- 1 November 2024
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 12 (11) , 1966
Microbial Mat Dominated by Amphora spp. and Their Adaptative Strategies in an Arsenic-Rich Brackish Pond
Marine diatoms are essential members of both phytoplankton and phytobenthic communities, able to colonize submerged artificial and natural surfaces, contributing to benthic microbial biomass. Diatoms have developed different adaptative mechanisms to cope with various environmental stresses, including high concentrations of heavy metals. The aim of this study was to investigate the arsenic resistance of diatoms, isolated from microbial mats collected from an arsenic-rich brackish pond (Lake Mergolo della Tonnara, Italy), by evaluating (i) their ability to form biofilms in the presence of arsenite (AsIII) or arsenate (AsV), and (ii) the variations in the photosynthetic pigments’ contents (i.e., chlorophyll a and c) in their biofilms. The mats were dominated by members of the genus Amphora, and isolates were affiliated with species of A. capitellata, A. coffeaeformis, and A. montana. The strains grew better in the presence of AsV than AsIII, which is generally less toxic. After seven days of incubation, each strain exhibited a different ability to form biofilms on glass surfaces in the presence of arsenic (25 ppm), with A. montana strain 27 being the most effective (86%) in the presence of AsIII, and A. coffeaeformis strain 26 (74%) with AsV. Photosynthetic pigment levels (chlorophyll a and c) differed in each biofilm, being poorly reduced by AsIII in strain 27, and by AsV in strain 26, indicating a species-specific response to arsenic stress. Our results indicated that Amphora species thriving in this environment can form biofilms as an As-resistance mechanism, maintain their levels of photosynthetic pigments, and support the functioning of the pond ecosystem, with A. montana being favored in the presence of AsIII, whereas A. coffeaeformis 26 in the presence of AsV. As producers of biofilms, these strains could be useful to develop new strategies to remediate arsenic pollution.
- 1 November 2024
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 12 (11) , 1966
Open AccessMicrobial Mat Dominated by Amphora spp. and Their Adaptative Strategies in an Arsenic-Rich Brackish Pond
Marine diatoms are essential members of both phytoplankton and phytobenthic communities, able to colonize submerged artificial and natural surfaces, contributing to benthic microbial biomass. Diatoms have developed different adaptative mechanisms to cope with various environmental stresses, including high concentrations of heavy metals. The aim of this study was to investigate the arsenic resistance of diatoms, isolated from microbial mats collected from an arsenic-rich brackish pond (Lake Mergolo della Tonnara, Italy), by evaluating (i) their ability to form biofilms in the presence of arsenite (AsIII) or arsenate (AsV), and (ii) the variations in the photosynthetic pigments’ contents (i.e., chlorophyll a and c) in their biofilms. The mats were dominated by members of the genus Amphora, and isolates were affiliated with species of A. capitellata, A. coffeaeformis, and A. montana. The strains grew better in the presence of AsV than AsIII, which is generally less toxic. After seven days of incubation, each strain exhibited a different ability to form biofilms on glass surfaces in the presence of arsenic (25 ppm), with A. montana strain 27 being the most effective (86%) in the presence of AsIII, and A. coffeaeformis strain 26 (74%) with AsV. Photosynthetic pigment levels (chlorophyll a and c) differed in each biofilm, being poorly reduced by AsIII in strain 27, and by AsV in strain 26, indicating a species-specific response to arsenic stress. Our results indicated that Amphora species thriving in this environment can form biofilms as an As-resistance mechanism, maintain their levels of photosynthetic pigments, and support the functioning of the pond ecosystem, with A. montana being favored in the presence of AsIII, whereas A. coffeaeformis 26 in the presence of AsV. As producers of biofilms, these strains could be useful to develop new strategies to remediate arsenic pollution.
- Open Access
Orange Peel Waste as Feedstock for the Production of Glycerol-Free Biodiesel by the Microalgae Nannochloropsis oculata
The bioconversion of agri-food waste into high-value products is gaining growing interest worldwide. Orange peel waste (OPW) is the main by-product of orange juice production and contains high levels of moisture and carbohydrates. In this study, the orange waste extract (OWE) obtained through acid hydrolysis of OPW was used as a substrate in the cultivation of the marine microalgae Nannochloropsis oculata. Photoheterotrophic (PH) and Photoautotrophic (PA) cultivations were performed in OWE medium and f/2 medium (obtained by supplementing OWE with macro- and micronutrients of f/2 medium), respectively, for 14 days. The biomass yields in PA and PH cultures were 390 mg L−1 and 450 mg L−1, while oil yields were 15% and 28%, respectively. The fatty acid (FA) profiles of PA cultures were mostly represented by saturated (43%) and monounsaturated (46%) FAs, whereas polyunsaturated FAs accounted for about 10% of the FAs. In PH cultures, FA profiles changed remarkably, with a strong increase in monounsaturated FAs (77.49%) and reduced levels of saturated (19.79%) and polyunsaturated (2.72%) FAs. Lipids obtained from PH cultures were simultaneously extracted and converted into glycerol-free biodiesel using an innovative microwave-assisted one-pot tandem protocol. FA methyl esters were then analyzed, and the absence of glycerol was confirmed. The FA profile was highly suitable for biodiesel production and the microwave-assisted one-pot tandem protocol was more effective than traditional extraction techniques. In conclusion, N. oculata used OWE photoheterotrophically, resulting in increased biomass and oil yield. Additionally, a more efficient procedure for simultaneous oil extraction and conversion into glycerol-free biodiesel is proposed.
Open AccessOrange Peel Waste as Feedstock for the Production of Glycerol-Free Biodiesel by the Microalgae Nannochloropsis oculata
The bioconversion of agri-food waste into high-value products is gaining growing interest worldwide. Orange peel waste (OPW) is the main by-product of orange juice production and contains high levels of moisture and carbohydrates. In this study, the orange waste extract (OWE) obtained through acid hydrolysis of OPW was used as a substrate in the cultivation of the marine microalgae Nannochloropsis oculata. Photoheterotrophic (PH) and Photoautotrophic (PA) cultivations were performed in OWE medium and f/2 medium (obtained by supplementing OWE with macro- and micronutrients of f/2 medium), respectively, for 14 days. The biomass yields in PA and PH cultures were 390 mg L−1 and 450 mg L−1, while oil yields were 15% and 28%, respectively. The fatty acid (FA) profiles of PA cultures were mostly represented by saturated (43%) and monounsaturated (46%) FAs, whereas polyunsaturated FAs accounted for about 10% of the FAs. In PH cultures, FA profiles changed remarkably, with a strong increase in monounsaturated FAs (77.49%) and reduced levels of saturated (19.79%) and polyunsaturated (2.72%) FAs. Lipids obtained from PH cultures were simultaneously extracted and converted into glycerol-free biodiesel using an innovative microwave-assisted one-pot tandem protocol. FA methyl esters were then analyzed, and the absence of glycerol was confirmed. The FA profile was highly suitable for biodiesel production and the microwave-assisted one-pot tandem protocol was more effective than traditional extraction techniques. In conclusion, N. oculata used OWE photoheterotrophically, resulting in increased biomass and oil yield. Additionally, a more efficient procedure for simultaneous oil extraction and conversion into glycerol-free biodiesel is proposed.
- Open Access
- 24 August 2023
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 11 (9) , 1660
Synergistic Antibiofilm Effects of Exopolymers Produced by the Marine, Thermotolerant Bacillus licheniformis B3-15 and Their Potential Medical Applications
The exopolysaccharide (EPS B3-15) and biosurfactant (BS B3-15), produced by the marine Bacillus licheniformis B3-15, were recently reported to possess different antibiofilm activities, with the EPS being more active in preventing the adhesion of Pseudomonas aeruginosa and Staphylococcus aureus and the BS in destroying their preformed biofilms on different surfaces. In this study, the synergistic effects of the two exopolymers on the bacterial adhesion and biofilm disruption of P. aeruginosa and S. aureus were evaluated on polystyrene, a medical polyvinyl chloride (PVC) device, and contact lenses (CLs) in order to address their potential use in biomedical applications. To this purpose, EPS B3-15 and BS B3-15 were equally combined (1:1 w/w), and the mixture (BPS B3-15) was added at different concentrations (from 50 to 300 µg mL−1) and at different times of bacterial development. Compared to each polymer, the BPS B3-15 (300 µg mL−1) more efficiently reduced the adhesion of P. aeruginosa and S. aureus on polystyrene (65 and 58%, respectively), PVC devices (62 and 42%, respectively), and CLs (39 and 35%, respectively), also in combination with a CLs care solution (88 and 39%, respectively). Furthermore, BPS B3-15 was able to disrupt mature biofilms, acting more effectively against S. aureus (72%) than P. aeruginosa (6%). The combination of exopolymers at low concentrations exhibited synergistic effects to prevent and eradicate biofilms.
- 24 August 2023
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 11 (9) , 1660
Open AccessSynergistic Antibiofilm Effects of Exopolymers Produced by the Marine, Thermotolerant Bacillus licheniformis B3-15 and Their Potential Medical Applications
The exopolysaccharide (EPS B3-15) and biosurfactant (BS B3-15), produced by the marine Bacillus licheniformis B3-15, were recently reported to possess different antibiofilm activities, with the EPS being more active in preventing the adhesion of Pseudomonas aeruginosa and Staphylococcus aureus and the BS in destroying their preformed biofilms on different surfaces. In this study, the synergistic effects of the two exopolymers on the bacterial adhesion and biofilm disruption of P. aeruginosa and S. aureus were evaluated on polystyrene, a medical polyvinyl chloride (PVC) device, and contact lenses (CLs) in order to address their potential use in biomedical applications. To this purpose, EPS B3-15 and BS B3-15 were equally combined (1:1 w/w), and the mixture (BPS B3-15) was added at different concentrations (from 50 to 300 µg mL−1) and at different times of bacterial development. Compared to each polymer, the BPS B3-15 (300 µg mL−1) more efficiently reduced the adhesion of P. aeruginosa and S. aureus on polystyrene (65 and 58%, respectively), PVC devices (62 and 42%, respectively), and CLs (39 and 35%, respectively), also in combination with a CLs care solution (88 and 39%, respectively). Furthermore, BPS B3-15 was able to disrupt mature biofilms, acting more effectively against S. aureus (72%) than P. aeruginosa (6%). The combination of exopolymers at low concentrations exhibited synergistic effects to prevent and eradicate biofilms.
- Open Access
- 20 May 2023
- Published by MDPI AG in Marine Drugs
- Vol. 21 (5) , 313
Anti-Bacterial Adhesion on Abiotic and Biotic Surfaces of the Exopolysaccharide from the Marine Bacillus licheniformis B3-15
The eradication of bacterial biofilm represents a crucial strategy to prevent a clinical problem associated with microbial persistent infection. In this study we evaluated the ability of the exopolysaccharide (EPS) B3-15, produced by the marine Bacillus licheniformis B3-15, to prevent the adhesion and biofilm formation of Pseudomonas aeruginosa ATCC 27853 and Staphylococcus aureus ATCC 29213 on polystyrene and polyvinyl chloride surfaces. The EPS was added at different times (0, 2, 4 and 8 h), corresponding to the initial, reversible and irreversible attachment, and after the biofilm development (24 or 48 h). The EPS (300 µg/mL) impaired the initial phase, preventing bacterial adhesion even when added after 2 h of incubation, but had no effects on mature biofilms. Without exerting any antibiotic activity, the antibiofilm mechanisms of the EPS were related to the modification of the (i) abiotic surface properties, (ii) cell-surface charges and hydrophobicity, and iii) cell-to-cell aggregation. The addition of EPS downregulated the expression of genes (lecA and pslA of P. aeruginosa and clfA of S. aureus) involved in the bacterial adhesion. Moreover, the EPS reduced the adhesion of P. aeruginosa (five logs-scale) and S. aureus (one log) on human nasal epithelial cells. The EPS could represent a promising tool for the prevention of biofilm-related infections.
- 20 May 2023
- Published by MDPI AG in Marine Drugs
- Vol. 21 (5) , 313
Open AccessAnti-Bacterial Adhesion on Abiotic and Biotic Surfaces of the Exopolysaccharide from the Marine Bacillus licheniformis B3-15
The eradication of bacterial biofilm represents a crucial strategy to prevent a clinical problem associated with microbial persistent infection. In this study we evaluated the ability of the exopolysaccharide (EPS) B3-15, produced by the marine Bacillus licheniformis B3-15, to prevent the adhesion and biofilm formation of Pseudomonas aeruginosa ATCC 27853 and Staphylococcus aureus ATCC 29213 on polystyrene and polyvinyl chloride surfaces. The EPS was added at different times (0, 2, 4 and 8 h), corresponding to the initial, reversible and irreversible attachment, and after the biofilm development (24 or 48 h). The EPS (300 µg/mL) impaired the initial phase, preventing bacterial adhesion even when added after 2 h of incubation, but had no effects on mature biofilms. Without exerting any antibiotic activity, the antibiofilm mechanisms of the EPS were related to the modification of the (i) abiotic surface properties, (ii) cell-surface charges and hydrophobicity, and iii) cell-to-cell aggregation. The addition of EPS downregulated the expression of genes (lecA and pslA of P. aeruginosa and clfA of S. aureus) involved in the bacterial adhesion. Moreover, the EPS reduced the adhesion of P. aeruginosa (five logs-scale) and S. aureus (one log) on human nasal epithelial cells. The EPS could represent a promising tool for the prevention of biofilm-related infections.
- Open Access
- 2 February 2023
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 11 (2) , 325
Arsenic Adsorption and Toxicity Reduction of An Exopolysaccharide Produced by Bacillus licheniformis B3-15 of Shallow Hydrothermal Vent Origin
Exopolysaccharide (EPS) production represents an adaptive strategy developed by extremophiles to cope with environmental stresses. The EPS-producing Bacillus licheniformis B3-15, of shallow marine vent origin (Vulcano Island, Italy), was previously reported as tolerant to arsenate (AsV). In this study, we evaluated: (i) the increasing production of EPS by Bacillus licheniformis B3-15 in the novel SG17 medium; (ii) the arsenic absorption capacity of the EPS by mass spectroscopy; (iii) the functional groups of EPS interacting with As by ATR-FTIR spectroscopy; and (iv) the ability of EPS to prevent arsenic toxicity by the bioluminescent assay. The EPS yield (240 mg L−1) was 45% higher than previously reported. The EPS was mainly constituted of disaccharide repeating units with a manno-pyranosidic configuration and low protein content, attributed to the poly-gamma glutamic acid component as evidenced by NMR analysis. ATR-FTIR spectra indicated that the functional groups of the EPS (O–H, C=O, C–O and C=C and N–O) were involved in the adsorption of the arsenic cations, with greater interactions between EPS and arsenate (AsV) than arsenite (AsIII). Consequently, the EPS at increasing concentration (100 and 300 µg mL−1) adsorbed AsV more efficiently (20.5% and 34.5%) than AsIII (0.7% and 1.8%). The bioluminescence assay showed that the EPS was not toxic, and its addition reduced the toxicity of both As forms by more than twofold. The crude EPS B3-15 could be used in arsenic bioremediation as a possible eco-friendly alternative to other physical or chemical methods.
- 2 February 2023
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 11 (2) , 325
Open AccessArsenic Adsorption and Toxicity Reduction of An Exopolysaccharide Produced by Bacillus licheniformis B3-15 of Shallow Hydrothermal Vent Origin
Exopolysaccharide (EPS) production represents an adaptive strategy developed by extremophiles to cope with environmental stresses. The EPS-producing Bacillus licheniformis B3-15, of shallow marine vent origin (Vulcano Island, Italy), was previously reported as tolerant to arsenate (AsV). In this study, we evaluated: (i) the increasing production of EPS by Bacillus licheniformis B3-15 in the novel SG17 medium; (ii) the arsenic absorption capacity of the EPS by mass spectroscopy; (iii) the functional groups of EPS interacting with As by ATR-FTIR spectroscopy; and (iv) the ability of EPS to prevent arsenic toxicity by the bioluminescent assay. The EPS yield (240 mg L−1) was 45% higher than previously reported. The EPS was mainly constituted of disaccharide repeating units with a manno-pyranosidic configuration and low protein content, attributed to the poly-gamma glutamic acid component as evidenced by NMR analysis. ATR-FTIR spectra indicated that the functional groups of the EPS (O–H, C=O, C–O and C=C and N–O) were involved in the adsorption of the arsenic cations, with greater interactions between EPS and arsenate (AsV) than arsenite (AsIII). Consequently, the EPS at increasing concentration (100 and 300 µg mL−1) adsorbed AsV more efficiently (20.5% and 34.5%) than AsIII (0.7% and 1.8%). The bioluminescence assay showed that the EPS was not toxic, and its addition reduced the toxicity of both As forms by more than twofold. The crude EPS B3-15 could be used in arsenic bioremediation as a possible eco-friendly alternative to other physical or chemical methods.